- flashrom - mail.coreboot.org

FAILED: Acer Aspire L5100
by Christophe Prévotaux 02 Oct '14

02 Oct '14

flashrom -w 82BA1P04.BIN --programmer internal flashrom v0.9.7-r1711 on FreeBSD 10.0-RELEASE-p9 (amd64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB600". Enabling flash write... OK. Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH) at physical address 0xfff80000. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00070002! Expected=0xff, Found=0x00, failed byte count from 0x00070000-0x00070fff: 0xfaf ERASE FAILED! Reading current flash chip contents... done. FAILED at 0x00070002! Expected=0xff, Found=0x00, failed byte count from 0x00070000-0x0007ffff: 0xfc1f ERASE FAILED! Reading current flash chip contents... done. FAILED at 0x00000000! Expected=0xff, Found=0x25, failed byte count from 0x00000000-0x0007ffff: 0x7039f ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! # dmidecode 2.12 SMBIOS 2.5 present. 41 structures occupying 1674 bytes. Table at 0x000F0000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Phoenix Technologies, LTD Version: R01-B0 Release Date: 01/29/2008 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 1.160 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Acer Product Name: AL 5100 / VL410 Version: R01-B0 Serial Number: UUID: 00000000-0000-0000-0807-060504030201 Wake-up Type: Power Switch SKU Number: Family: Handle 0x0002, DMI type 2, 14 bytes Base Board Information Manufacturer: Acer Product Name: FRS690L Version: Serial Number: Asset Tag: Features: Board is a hosting board Location In Chassis: Chassis Handle: 0x0000 Type: Motherboard Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Acer Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: Unknown OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: Socket AM2 Type: Central Processor Family: Athlon 64 X2 Manufacturer: AMD ID: B2 0F 06 00 FF FB 8B 17 Signature: Family 15, Model 107, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Multi-threading) Version: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ Voltage: 1.3 V External Clock: 199 MHz Max Speed: 3000 MHz Current Speed: 2886 MHz Status: Populated, Enabled Upgrade: Socket 940 L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0005, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 2048 MB Maximum Total Memory Size: 4096 MB Supported Speeds: 70 ns 60 ns 50 ns Supported Memory Types: Standard DIMM Memory Module Voltage: 2.9 V Associated Memory Slots: 2 0x0006 0x0007 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 6 ns Type: Other Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A2 Bank Connections: 2 3 Current Speed: 6 ns Type: Other Unknown EDO Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: Other Port Type: Keyboard Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Other Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Other Port Type: USB Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Other Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB4 External Connector Type: Other Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB5 External Connector Type: Other Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB6 External Connector Type: Other Port Type: USB Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB7 External Connector Type: Other Port Type: USB Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB8 External Connector Type: Other Port Type: USB Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB9 External Connector Type: Other Port Type: USB Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: ETHERNET External Connector Type: RJ-45 Port Type: Network Port Handle 0x0019, DMI type 9, 13 bytes System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001A, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supported Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is provided Handle 0x001C, DMI type 9, 13 bytes System Slot Information Designation: PCI-X Type: 32-bit PCI-X Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided Handle 0x001D, DMI type 9, 13 bytes System Slot Information Designation: PCI-X Type: 32-bit PCI-X Current Usage: Available Length: Long ID: 112 Characteristics: 5.0 V is provided Handle 0x001E, DMI type 13, 22 bytes BIOS Language Information Language Description Format: Long Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1 Handle 0x001F, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0020, DMI type 17, 27 bytes Memory Device Array Handle: 0x001F Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: DDR2 Type Detail: None Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0021, DMI type 17, 27 bytes Memory Device Array Handle: 0x001F Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank2/3 Type: DDR2 Type Detail: None Speed: 667 MHz Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0022, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x001F Partition Width: 1 Handle 0x0023, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0020 Memory Array Mapped Address Handle: 0x0022 Partition Row Position: 1 Handle 0x0024, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0021 Memory Array Mapped Address Handle: 0x0022 Partition Row Position: 1 Handle 0x0025, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x0026, DMI type 188, 255 bytes OEM-specific Type Header and Data: BC FF 26 00 4B 38 4E 50 54 44 52 41 4D 30 03 00 00 00 00 00 7F 00 00 00 00 00 01 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 40 00 10 0A 00 00 00 00 00 00 04 00 EF 02 00 5D 01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E0 3E 78 00 00 00 00 00 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 24 C2 6A 5D 20 13 12 00 20 0C 01 00 6A 80 10 67 88 88 FF FE 15 15 17 17 17 16 16 17 15 00 00 00 15 16 16 15 16 15 16 16 15 00 00 00 37 00 00 00 17 16 16 16 16 16 16 16 17 15 15 15 15 16 15 16 16 15 3C 00 00 00 22 12 11 10 00 28 00 10 22 12 11 10 00 28 00 00 00 00 00 00 00 00 00 Strings: Handle 0x0027, DMI type 190, 255 bytes OEM-specific Type Header and Data: BE FF 27 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 01 06 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Strings: Handle 0x0028, DMI type 127, 4 bytes End Of Table -- Christophe Prévotaux Email: c.prevotaux(a)rural-networks.com

1 0

Re: [flashrom] Raspberry pi and winbond 25q32
by Stefan Tauner 30 Sep '14

30 Sep '14

On Sun, 28 Sep 2014 15:54:10 +0200 Manuel <ciaociaciaocia(a)gmail.com> wrote: > I have Tried to flash the w25q32 that is soldered on my motherboard using > raspberry pi. I have verified that alla the connections are right, and i > also have connected wp and hold to vcc. > Also i have used short cables, and i have soldered them directly to the > chip. > Anyway it doesn't recognize the chip If I read that correctly the chip is still soldered to the mainboard (additionally to the programmer wires). In that case #3 from the problems listed at http://flashrom.org/ISP might apply. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Raspberry pi and winbond 25q32
by Manuel 28 Sep '14

28 Sep '14

I have Tried to flash the w25q32 that is soldered on my motherboard using raspberry pi. I have verified that alla the connections are right, and i also have connected wp and hold to vcc. Also i have used short cables, and i have soldered them directly to the chip. Anyway it doesn't recognize the chip and i get: Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. Probing for Generic unknown SPI chip (REMS), 0 kB: REMS returned 0x00 0x00. probe_spi_rems: id1 0x0, id2 0x0 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI). === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE Please, Any help?

1 0

Macronix mx25l12845e can't read
by XVilka Haos of System 28 Sep '14

28 Sep '14

Hello! Reposting from local board: flashrom trunk can't read or identify Macronix MX25L12345E Here is the output of SPIPGM 2.19 /SPIPGM/SPIPGM64 /i SPI FlashROM Programmer 2.19 (C) 2008-2014 by Martin Rehak; rayer(a)seznam.cz Compiled by GCC 4.4.5 at 16:06:31, May 3 2014 (GNU/Linux compatability) SPI connected to LPT port at I/O base address: 378h, SCK pulse width: t+0us FlashROM JEDEC ID, type: C22018h Macronix MX25L12835E/12836E/12873F (16MB) Status = 00h (SRP, AAI, BP3, BP2, BP1, BP0, WEL, BSY) 0 0 0 0 0 0 0 0 Found Macronix flash chip «MX25L12805(D)» (16384 kB, SPI) on rayer_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set I've asked for full logs, but still no answer, so I'm sending this just to save possible error or future chip/board target. Best regards, XVilka.

1 0

[r1850] ASRock C2750D4I // Intel Avoton/Rangeley requires special support
by Johannes Obermayr 27 Sep '14

27 Sep '14

Hi, it looks like r1844 added support for Intel Avoton/Rangeley but my ASRock C2750D4I seems to require some more love. Tested on openSUSE Factory with r1850 from https://pmbs.links2linux.de/package/show/Extra/flashrom?expand=0 --- Johannes $ sudo /usr/sbin/flashrom -p internal -V -w C275D4I2.50 flashrom v0.9.7-unknown on Linux 3.17.0-rc6-1.g811b3a2-desktop (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.3 20140627 [gcc-4_8-branch revision 212064], little endian Command line (5 args): /usr/sbin/flashrom -p internal -V -w C275D4I2.50 Calibrating delay loop... OS timer resolution is 2 usecs, 1375M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1001 us, 10000 myus = 10010 us, 8 myus = 9 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "C2750D4I" DMI string baseboard-version: " " Found chipset "Intel Avoton/Rangeley" with PCI ID 8086:1f38. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0x40000c01: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap: not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes SPI_BASE_ADDRESS = 0xfed01000 SPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x2a: BIOS Lock Enable: enabled, BIOS Write Enable: disabled Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0x0 from 0x2a to 0x09 failed. New value is 0x2a. 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x01ff0000 FREG0: Flash Descriptor region (0x00000000-0x001fffff) is read-write. 0x58: 0x07ff0200 FREG1: BIOS region (0x00200000-0x007fffff) is read-write. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf87f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xC4: 0x00802025 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002025 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20 0xD0: 0x00000000 (FPB) OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX23L1654, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX23L6454, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX23L12854, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E/MX25L6473E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U12835F, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW106, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW406A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FU406B, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW806, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Sanyo LE25FW808, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128P......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128P......1, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL129P......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL129P......1, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF020A, 256 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF512(A), 64 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF010(A), 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF020, 256 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.V, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) mapped at physical address 0x00000000ff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x45, id2 0x18, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:S, 0x181000-0x181fff:S, 0x182000-0x182fff:S, 0x183000-0x183fff:S, 0x184000-0x184fff:S, 0x185000-0x185fff:S, 0x186000-0x186fff:S, 0x187000-0x187fff:S, 0x188000-0x188fff:S, 0x189000-0x189fff:S, 0x18a000-0x18afff:S, 0x18b000-0x18bfff:S, 0x18c000-0x18cfff:S, 0x18d000-0x18dfff:S, 0x18e000-0x18efff:S, 0x18f000-0x18ffff:S, 0x190000-0x190fff:S, 0x191000-0x191fff:S, 0x192000-0x192fff:S, 0x193000-0x193fff:S, 0x194000-0x194fff:S, 0x195000-0x195fff:S, 0x196000-0x196fff:S, 0x197000-0x197fff:S, 0x198000-0x198fff:S, 0x199000-0x199fff:S, 0x19a000-0x19afff:S, 0x19b000-0x19bfff:S, 0x19c000-0x19cfff:S, 0x19d000-0x19dfff:S, 0x19e000-0x19efff:S, 0x19f000-0x19ffff:S, 0x1a0000-0x1a0fff:S, 0x1a1000-0x1a1fff:S, 0x1a2000-0x1a2fff:S, 0x1a3000-0x1a3fff:S, 0x1a4000-0x1a4fff:S, 0x1a5000-0x1a5fff:S, 0x1a6000-0x1a6fff:S, 0x1a7000-0x1a7fff:S, 0x1a8000-0x1a8fff:S, 0x1a9000-0x1a9fff:S, 0x1aa000-0x1aafff:S, 0x1ab000-0x1abfff:S, 0x1ac000-0x1acfff:S, 0x1ad000-0x1adfff:S, 0x1ae000-0x1aefff:S, 0x1af000-0x1affff:S, 0x1b0000-0x1b0fff:S, 0x1b1000-0x1b1fff:S, 0x1b2000-0x1b2fff:S, 0x1b3000-0x1b3fff:S, 0x1b4000-0x1b4fff:S, 0x1b5000-0x1b5fff:S, 0x1b6000-0x1b6fff:S, 0x1b7000-0x1b7fff:S, 0x1b8000-0x1b8fff:S, 0x1b9000-0x1b9fff:S, 0x1ba000-0x1bafff:S, 0x1bb000-0x1bbfff:S, 0x1bc000-0x1bcfff:S, 0x1bd000-0x1bdfff:S, 0x1be000-0x1befff:S, 0x1bf000-0x1bffff:S, 0x1c0000-0x1c0fff:S, 0x1c1000-0x1c1fff:S, 0x1c2000-0x1c2fff:S, 0x1c3000-0x1c3fff:S, 0x1c4000-0x1c4fff:S, 0x1c5000-0x1c5fff:S, 0x1c6000-0x1c6fff:S, 0x1c7000-0x1c7fff:S, 0x1c8000-0x1c8fff:S, 0x1c9000-0x1c9fff:S, 0x1ca000-0x1cafff:S, 0x1cb000-0x1cbfff:S, 0x1cc000-0x1ccfff:S, 0x1cd000-0x1cdfff:S, 0x1ce000-0x1cefff:S, 0x1cf000-0x1cffff:S, 0x1d0000-0x1d0fff:S, 0x1d1000-0x1d1fff:S, 0x1d2000-0x1d2fff:S, 0x1d3000-0x1d3fff:S, 0x1d4000-0x1d4fff:S, 0x1d5000-0x1d5fff:S, 0x1d6000-0x1d6fff:S, 0x1d7000-0x1d7fff:S, 0x1d8000-0x1d8fff:S, 0x1d9000-0x1d9fff:S, 0x1da000-0x1dafff:S, 0x1db000-0x1dbfff:S, 0x1dc000-0x1dcfff:S, 0x1dd000-0x1ddfff:S, 0x1de000-0x1defff:S, 0x1df000-0x1dffff:S, 0x1e0000-0x1e0fff:S, 0x1e1000-0x1e1fff:S, 0x1e2000-0x1e2fff:S, 0x1e3000-0x1e3fff:S, 0x1e4000-0x1e4fff:S, 0x1e5000-0x1e5fff:S, 0x1e6000-0x1e6fff:S, 0x1e7000-0x1e7fff:S, 0x1e8000-0x1e8fff:S, 0x1e9000-0x1e9fff:S, 0x1ea000-0x1eafff:S, 0x1eb000-0x1ebfff:S, 0x1ec000-0x1ecfff:S, 0x1ed000-0x1edfff:S, 0x1ee000-0x1eefff:S, 0x1ef000-0x1effff:S, 0x1f0000-0x1f0fff:S, 0x1f1000-0x1f1fff:S, 0x1f2000-0x1f2fff:S, 0x1f3000-0x1f3fff:S, 0x1f4000-0x1f4fff:S, 0x1f5000-0x1f5fff:S, 0x1f6000-0x1f6fff:S, 0x1f7000-0x1f7fff:S, 0x1f8000-0x1f8fff:S, 0x1f9000-0x1f9fff:S, 0x1fa000-0x1fafff:S, 0x1fb000-0x1fbfff:S, 0x1fc000-0x1fcfff:S, 0x1fd000-0x1fdfff:S, 0x1fe000-0x1fefff:S, 0x1ff000-0x1fffff:S, 0x200000-0x200fff:ETransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=2, DBC=0, SME=0, SCF=0 Running OPCODE 0x20 failed at address 0x200000 (payload length was 0). spi_block_erase_20 failed during command execution at address 0x200000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:S, 0x008000-0x00ffff:S, 0x010000-0x017fff:S, 0x018000-0x01ffff:S, 0x020000-0x027fff:S, 0x028000-0x02ffff:S, 0x030000-0x037fff:S, 0x038000-0x03ffff:S, 0x040000-0x047fff:S, 0x048000-0x04ffff:S, 0x050000-0x057fff:S, 0x058000-0x05ffff:S, 0x060000-0x067fff:S, 0x068000-0x06ffff:S, 0x070000-0x077fff:S, 0x078000-0x07ffff:S, 0x080000-0x087fff:S, 0x088000-0x08ffff:S, 0x090000-0x097fff:S, 0x098000-0x09ffff:S, 0x0a0000-0x0a7fff:S, 0x0a8000-0x0affff:S, 0x0b0000-0x0b7fff:S, 0x0b8000-0x0bffff:S, 0x0c0000-0x0c7fff:S, 0x0c8000-0x0cffff:S, 0x0d0000-0x0d7fff:S, 0x0d8000-0x0dffff:S, 0x0e0000-0x0e7fff:S, 0x0e8000-0x0effff:S, 0x0f0000-0x0f7fff:S, 0x0f8000-0x0fffff:S, 0x100000-0x107fff:S, 0x108000-0x10ffff:S, 0x110000-0x117fff:S, 0x118000-0x11ffff:S, 0x120000-0x127fff:S, 0x128000-0x12ffff:S, 0x130000-0x137fff:S, 0x138000-0x13ffff:S, 0x140000-0x147fff:S, 0x148000-0x14ffff:S, 0x150000-0x157fff:S, 0x158000-0x15ffff:S, 0x160000-0x167fff:S, 0x168000-0x16ffff:S, 0x170000-0x177fff:S, 0x178000-0x17ffff:S, 0x180000-0x187fff:S, 0x188000-0x18ffff:S, 0x190000-0x197fff:S, 0x198000-0x19ffff:S, 0x1a0000-0x1a7fff:S, 0x1a8000-0x1affff:S, 0x1b0000-0x1b7fff:S, 0x1b8000-0x1bffff:S, 0x1c0000-0x1c7fff:S, 0x1c8000-0x1cffff:S, 0x1d0000-0x1d7fff:S, 0x1d8000-0x1dffff:S, 0x1e0000-0x1e7fff:S, 0x1e8000-0x1effff:S, 0x1f0000-0x1f7fff:S, 0x1f8000-0x1fffff:S, 0x200000-0x207fff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_52 failed during command execution at address 0x200000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:S, 0x190000-0x19ffff:S, 0x1a0000-0x1affff:S, 0x1b0000-0x1bffff:S, 0x1c0000-0x1cffff:S, 0x1d0000-0x1dffff:S, 0x1e0000-0x1effff:S, 0x1f0000-0x1fffff:S, 0x200000-0x20ffff:EInvalid OPCODE 0x06, will not execute. spi_block_erase_d8 failed during command execution at address 0x200000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x7fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. Restoring MMIO space at 0x7fedb09490fc

2 3

Flashrom - Writing Specific Sections of the BIOS
by Hamilton, Kurt 26 Sep '14

26 Sep '14

To whom this may concern, I am working with Little Board model 735, produced by Ampro, with chipset Intel ICH7M and chip “SST SST25VF016B”. The board has a linux distro installed on it. What I’m trying to achieve is to be able to write only very specific sections of the BIOS, and not the whole thing (I can read, write, and verify the entire flash successfully). I am not sure if flashrom can do this with layouts. So if someone changed one setting, I can read the BIOS and compare the file against a previously known good image, and only write that specific section to fix it. I am curious as to whether this can be done with layouts some how, and would appreciate any help possible. Thank you, -Kurt This E-mail is confidential. It may also be legally privileged. If you are not the addressee you may not copy, forward, disclose or use any part of it. If you have received this message in error, please delete it and all copies from your system and notify the sender immediately by return E-mail. Internet communications cannot be guaranteed to be timely, secure, error or virus-free. The sender does not accept liability for any errors or omissions.

2 1

FW: [PATCH v2] Enable Dediprog SF100 programmers with FW 5.5.1
by Pablo Cases 24 Sep '14

24 Sep '14

Self-acking the patch after a >3 week quarantine period as defined in the Developer Guidelines. v2 changes: * Major v1 bug fixed: Partial reads and writes are now supported. Read, Erase, Write tested up to 8MiB on Winbond W25Q64BV part. * Trivial v1 bug fixed: Block and Sector erase commands functional (previously only Chip Erase commands were functional). Signed-off-by: Pablo Cases <pablo.cases at flatfrog.com> Acked-by: Pablo Cases <pablo.cases at flatfrog.com> Index: dediprog.c =================================================================== --- dediprog.c (revision 1846) +++ dediprog.c (working copy) @@ -101,8 +101,13 @@ target_leds = leds; } - ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, target_leds, + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, (target_leds << 8) +| 0x09, 0x0, NULL, 0x0, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, target_leds, + NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { msg_perr("Command Set LED 0x%x failed (%s)!\n", leds, usb_strerror()); @@ -216,8 +221,28 @@ const char count_and_chunk[] = {count & 0xff, (count >> 8) & 0xff, chunksize & 0xff, - (chunksize >> 8) & 0xff}; + (chunksize >> 8) & 0xff, + 0xff, + 0x00, + (start % 0x10000) & 0xff, + ((start % 0x10000) >> 8) & 0xff, + (start / 0x10000) & 0xff, + ((start / 0x10000) >> 8) & 0xff}; + unsigned int count_and_chunk_size; + /* Reverse engineering note: + * ======================== + * Omitting the added 6 bytes to count_and_chunk[] on SF100 FW 5.5.1 + * results in SF100 to incorrectly issue 0x0B (Fast Read) command with + * start at SPI address 0xF30000 instead of the expected address 0x0. + * (On a 8MiB W25Q64.V chip this wraps around to physical address 0x730000). + * Possibly a result of SF100 FW 5.5.1 receive data buffer initialization. + */ + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + count_and_chunk_size = 10; + else + count_and_chunk_size = 4; + if ((start % chunksize) || (len % chunksize)) { msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " "at flashrom(a)flashrom.org\n", __func__, start, len); @@ -230,10 +255,15 @@ /* Command Read SPI Bulk. No idea which read command is used on the * SPI side. */ - ret = usb_control_msg(dediprog_handle, 0x42, 0x20, start % 0x10000, + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0x42, 0x20, 0x00, + 0x00, (char *)count_and_chunk, + count_and_chunk_size, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x20, start % 0x10000, start / 0x10000, (char *)count_and_chunk, - sizeof(count_and_chunk), DEFAULT_TIMEOUT); - if (ret != sizeof(count_and_chunk)) { + count_and_chunk_size, DEFAULT_TIMEOUT); + if (ret != count_and_chunk_size) { msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, usb_strerror()); return 1; @@ -316,9 +346,37 @@ * space in a USB bulk transfer must be filled with 0xff padding. */ const unsigned int count = len / chunksize; - const char count_and_cmd[] = {count & 0xff, (count >> 8) & 0xff, 0x00, dedi_spi_cmd}; + const char count_and_cmd[] = {count & 0xff, + (count >> 8) & 0xff, + 0x00, + dedi_spi_cmd, + 0xff, + 0x00, + (start % 0x10000) & 0xff, + ((start % 0x10000) >> 8) & 0xff, + (start / 0x10000) & 0xff, + ((start / 0x10000) >> 8) & 0xff}; + unsigned int count_and_cmd_size; char usbbuf[512]; - + + /* Reverse engineering note: + * ======================== + * Omitting the added 6 bytes to count_and_cmd[] on SF100 FW 5.5.1 + * results in SF100 to incorrectly issue 0x02 (Page Program) command with + * start at SPI address 0xF30000 instead of the expected address 0x0. + * (On a 8MiB W25Q64.V chip this wraps around to physical address 0x730000). + * Possibly a result of SF100 FW 5.5.1 receive data buffer initialization. + * + * Issuing a single spi_bulk_write() command with this appendage will + * correct the addressing so that all further spi_bulk_write() commands + * (with or without the appendage) will start at SPI address 0x0. + * Only a power cycle of the SF100 will reintroduce the error. + */ + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + count_and_cmd_size = 10; + else + count_and_cmd_size = 4; + /* * We should change this check to * chunksize > 512 @@ -342,9 +400,13 @@ /* Command Write SPI Bulk. No idea which write command is used on the * SPI side. */ - ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, start / 0x10000, - (char *)count_and_cmd, sizeof(count_and_cmd), DEFAULT_TIMEOUT); - if (ret != sizeof(count_and_cmd)) { + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, 0x00, 0x00, + (char *)count_and_cmd, count_and_cmd_size, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, start / 0x10000, + (char *)count_and_cmd, count_and_cmd_size, DEFAULT_TIMEOUT); + if (ret != count_and_cmd_size) { msg_perr("Command Write SPI Bulk failed, %i %s!\n", ret, usb_strerror()); return 1; @@ -447,10 +509,28 @@ msg_perr("Untested readcnt=%i, aborting.\n", readcnt); return 1; } - - ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0xff, - readcnt ? 0x1 : 0x0, (char *)writearr, writecnt, - DEFAULT_TIMEOUT); + + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + if (*writearr == 0x6 || // Write Enable + *writearr == 0x60 || *writearr == 0xc7 || // Chip Erase + *writearr == 0x52 || *writearr == 0xd8 || // Block Erase + *writearr == 0x20) // Sector Erase + /* These commands are treated differently otherwise + * Read Status Register-1 (05h) will return incorrect + * results for WEL and WIP bits + * (at least on Winbond W25Q64BV Flash) + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0x0, + 0x0, (char *)writearr, writecnt, + DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0x1, + 0x0, (char *)writearr, writecnt, + DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0xff, + readcnt ? 0x1 : 0x0, (char *)writearr, writecnt, + DEFAULT_TIMEOUT); if (ret != writecnt) { msg_perr("Send SPI failed, expected %i, got %i %s!\n", writecnt, ret, usb_strerror()); @@ -459,8 +539,13 @@ if (!readcnt) return 0; memset(readarr, 0, readcnt); - ret = usb_control_msg(dediprog_handle, 0xc2, 0x01, 0xbb8, 0x0000, - (char *)readarr, readcnt, DEFAULT_TIMEOUT); + + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0xc2, 0x1, 0x1, 0x0, + (char *)readarr, readcnt, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0xc2, 0x1, 0xbb8, 0x0000, + (char *)readarr, readcnt, DEFAULT_TIMEOUT); if (ret != readcnt) { msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, usb_strerror()); @@ -485,6 +570,12 @@ " String!\n"); return 1; } + /* Reverse engineering note: + * ======================== + * Dediprog Software SF6.0.4.33 application sends the devicestring + * command with wValue and wIndex values of 0x0 instead of 0xff. + * Both commands yield the same result, so nothing is changed for now. + */ /* Command Receive Device String. */ memset(buf, 0, sizeof(buf)); ret = usb_control_msg(dediprog_handle, 0xc2, 0x8, 0xff, 0xff, buf, _______________________________________________ flashrom mailing list flashrom(a)flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom

1 0

rayer_spi
by Arman Khodabande 23 Sep '14

23 Sep '14

Hello As I checked Supported hardware on the Flashrom website the chip EN25F32 has unknown status. I wanted to inform you that successfully tested the Read and Write operations of this chip on a Rayer_spi programmer. The EN25F32 chip acts as the Bios in the Dell XPS L502 Laptops. Here's the log with (-V): ================================================= flashrom v0.9.6.1-r1612 on MS-DOS 8 (i686) flashrom was built with libpci 3.1.5, GCC 4.4.4, little endian Command line (9 args): c:/mod1/flashrom.exe -V -p rayer_spi -c EN25F32 -r EN25F32.rom -o read.log Calibrating delay loop... OS timer resolution is 50000 usecs, 2760M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 200000 myus = 220000 us, OK. Initializing rayer_spi programmer Using address 0x378 as I/O base for parallel port access. Using RayeR SPIPGM pinout. The following protocols are supported: SPI. Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3116 Chip status register is 00 Found Eon flash chip "EN25F32" (4096 kB, SPI) on rayer_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. ================================================= flashrom v0.9.6.1-r1612 on MS-DOS 8 (i686) flashrom was built with libpci 3.1.5, GCC 4.4.4, little endian Command line (9 args): c:/mod1/flashrom.exe -V -p rayer_spi -c EN25F32 -w Bios.bin -o logwrite.txt Calibrating delay loop... OS timer resolution is 50000 usecs, 2760M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 200000 myus = 220000 us, OK. Initializing rayer_spi programmer Using address 0x378 as I/O base for parallel port access. Using RayeR SPIPGM pinout. The following protocols are supported: SPI. Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x3116 Chip status register is 00 Found Eon flash chip "EN25F32" (4096 kB, SPI) on rayer_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EW, ..... Blah blah blah Erase/write done. ================================================= Perhaps the verification process failed which maybe because of programmer disconnection or fault. It may have been succeeded. So I'm unsure. Verifying flash... VERIFY FAILED at 0x00008134! Expected=0xed, Read=0xef, failed byte count from 0x00000000-0x003fffff: 0xbe54 Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: "! I verified the chip with another program called SPIPGM and it showed no errors. so the READ and WRITE process was fine by flashrom. Thanks for your great software Regards

1 0

Re: [flashrom] stk500 programmer
by David Hendricks 21 Sep '14

21 Sep '14

On Sat, Sep 20, 2014 at 9:45 AM, Hennady Ki <ctakahtpa8bi(a)gmail.com> wrote: > Thanks for the answer. ST-LINK v2 works with FlashROM 0.9.7? > No. I've used Texane's stlink utility with ST-Link v2: https://github.com/texane/stlink -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Re: [flashrom] stk500 programmer
by Stefan Tauner 20 Sep '14

20 Sep '14

On Thu, 18 Sep 2014 09:09:35 +0400 Hennady Ki <ctakahtpa8bi(a)gmail.com> wrote: > Hi, can i use the STK500 programmer and FlashROM 0.9.7 together? No. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Ati PCI-E flashed wrong bios ( the card does'nt have a second bios)
by Sprizzo Pazzi 20 Sep '14

20 Sep '14

Hi, Sorry for bother you but today i did flash my video card with the wrong bios with atiflash, now the card is not recognized anymore as ATI( now it's a Standard VGA controller) and i cant flash it back again with atiflash because it's no more an ati, but when i use some videocard tool i can see the videocard attached an my pci-e slot and i can see the info about her but they are all wrong, i tryed evey tutorial on internet but nothing seems to work, after tons of reading i learn about this program Flashrom that should be able to flash pci express GPU bios rom, i still have the old bios saved. Now ( sorry for the noob question) if someone is willing to help me could just answer at this few question : -It's true that flashrom can write gpu bios rom? -Can i force flash my old bios.rom file with Flashrom into my videocard? - If it's possible to flash gpu bios rom with flashrom, can anyone explain me how to? Sprizzo Pazzi

1 0

stk500 programmer
by Hennady Ki 18 Sep '14

18 Sep '14

Hi, can i use the STK500 programmer and FlashROM 0.9.7 together?

1 0

Programming using an arduino nano 3.3v
by Goffredo Baroncelli 17 Sep '14

17 Sep '14

Hi all, I would like to share my experience in programming a flash-chip using an arduino nano 3.3v. I was unable to update the wiki because I don't have an account. I hope that posting that could help someone. I had to reprogramming an adsl modem. This modem have a 128mbit flash chip. Someone identify this as Macronix MX25L12835E (on another modem of the same type), but to me the code seems to start with FL129PIF; but I am not sure because the name was poor readable. Anyway I set the chip as "S25FL128P......0". The only thing is that flash rom first tried the "erase function 0.." then "erase function 1.." with success. I used flashrom and serprog-duino. But I had to tweaked the serprog-duino source to lower the speed to 115200. In fact I was unable to read the flash with the arduino USB interface [1]; I had to use an external power supply for the arduino board and the flash chip; a 3.3v usb serial adapter was used to connect the PC and the arduino board. I was able to use the same schematic included in serprog-duino. The process was a bit slow (30 minutes to download the image, ~1h to upload it), but at the end it was a successful activity. I want to say thank to everybody contributed to this project. BR G.Baroncelli [*] Flashrom never finished. Strac-ing under linux flashrom, the program stopped at a read(2). So I am inclined to think that it was a usb driver/devices problem.... P.S. I am not a subscriber, so if you want to reply, please put me in CC. -- gpg @keyserver.linux.it: Goffredo Baroncelli (kreijackATinwind.it> Key fingerprint BBF5 1610 0B64 DAC6 5F7D 17B2 0EDA 9B37 8B82 E0B5

1 0

enable_flash_ich_dc_spi: unknown ICH generation. Please report!
by Ceriel Jacobs 17 Sep '14

17 Sep '14

flashrom v0.9.6.1-r1563 on Linux 3.13.0-35-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 2799M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10002 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "H81 Pro BTC" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel Lynx Point" with PCI ID 8086:8c5c. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... enable_flash_ich_dc_spi: unknown ICH generation. Please report! 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8 Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (unknown) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xf008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x001a673f (FADDR) 0x50: 0x00004a4b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0x4b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xfc4010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=4 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x80802025 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002025 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x50444653 (FPB) SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Chip status register is 00 Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 0xffc00000. Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4016 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x8d, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x8d, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x8d, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x59, id2 0x83, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x54, id2 0xe7, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x8d, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x54, id2 0xe7, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x8d, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x8f, id2 0x1a, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xc7, id2 0x45, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q32" (4096 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). No operations were specified. Restoring MMIO space at 0x7f33c24398a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

W836xx: Panasonic Toughbook CF-74CCEBDLT flashrom -V
by Sven Jonetat 17 Sep '14

17 Sep '14

Hello, i have a output with the please to send some data to you. perhaps it is also usefull for you. thanks for the good flashrom tool. reguards, Sven ------------------------------------- user@system-CF-74CCEBDLT:~/Desktop/bios/cf74$ sudo flashrom -VV --programmer internal --read cf74.img --output log.txt [sudo] password for user: flashrom v0.9.6.1-r1563 on Linux 3.13.0-35-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (7 args): flashrom -VV --programmer internal --read cf74.img --output log.txt Calibrating delay loop... OS timer resolution is 1 usecs, 1037M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 1040M loops per second, 10 myus = 10 us, 100 myus = 88 us, 1000 myus = 854 us, 10000 myus = 9502 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Matsushita Electric Industrial Co.,Ltd." DMI string system-product-name: "CF-74CCEBDLT" DMI string system-version: "001" DMI string baseboard-manufacturer: "Matsushita Electric Industrial Co.,Ltd." DMI string baseboard-product-name: "CF74-1" DMI string baseboard-version: "001" DMI string chassis-type: "Notebook" Laptop detected via DMI. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: f4. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Supermicro X9SCM-F
by Paul van der Vlis 11 Sep '14

11 Sep '14

Hello, Here the output of flashrom on a Supermicro X9SCM-F. With regards, Paul van der Vlis. ------------------- flashrom v0.9.7-r1782 on Linux 3.14-0.bpo.2-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.2, little endian Command line (3 args): flashrom -V --programmer internal Calibrating delay loop... OS timer resolution is 1 usecs, 3336M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 1003 us, 10000 myus = 10016 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "X9SCL/X9SCM" DMI string system-version: "0123456789" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "X9SCL/X9SCM" DMI string baseboard-version: "1.11A" Found chipset "Intel C204" with PCI ID 8086:1c54. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0xc20: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytesSPI Read Configuration: prefetching disabled, caching enabled, BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0x00007f565aa5a000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x50: 0x00001a1b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x1a, BRRA 0x1b 0x54: 0x000f0000 FREG0: Warning: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. 0x5C: 0x03ff0030 FREG2: Warning: Management Engine region (0x00030000-0x003fffff) is locked. 0x60: 0x002f0010 FREG3: Gigabit Ethernet region (0x00010000-0x0002ffff) is read-write. Not all flash regions are freely accessible by flashrom. This is most likely due to an active ME. Please see http://flashrom.org/ME for details. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf84140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1616, id2 0x16 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1616, id2 0x16 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25VF512A, 64 kB: probe_spi_rems: id1 0xef, id2 0x16 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x16 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0xef, id2 0x16 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x16 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x16 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Probing for Unknown SFDP-capable chip, 0 kB: Parsing JEDEC flash parameter table... done. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4017 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x16 Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x89, id2 0x81, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x7b, id2 0x12, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q64.V" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). No operations were specified. Restoring MMIO space at 0x7f565aa5d8a0 Restoring MMIO space at 0x7f565aa5d89c Restoring MMIO space at 0x7f565aa5d898 Restoring MMIO space at 0x7f565aa5d896 Restoring MMIO space at 0x7f565aa5d894 Restoring PCI config space for 00:1f:0 reg 0xdc ----------------------

1 0

Re: [flashrom] typo in SPI prettyprint?
by Stefan Tauner 11 Sep '14

11 Sep '14

On Wed, 10 Sep 2014 11:05:09 +0000 Pablo Cases <pablo.cases(a)flatfrog.com> wrote: > Browsed through the code and noticed a possible typo in sp25_statusreg.c: spi_prettyprint_status_register_bp (r1850) > > Shouldn't Block Protect 4 bit be shifted 6 steps instead of 5? Hello Pablo, indeed. Thanks for spotting and reporting this. I have fixed this locally and will commit it later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

typo in SPI prettyprint?
by Pablo Cases 10 Sep '14

10 Sep '14

Hi, Browsed through the code and noticed a possible typo in sp25_statusreg.c: spi_prettyprint_status_register_bp (r1850) Shouldn't Block Protect 4 bit be shifted 6 steps instead of 5? ------------------------------------------------------------------------------------------ /* Common block protection (BP) bits. */ static void spi_prettyprint_status_register_bp(uint8_t status, int bp) { switch (bp) { /* Fall through. */ case 4: msg_cdbg("Chip status register: Block Protect 4 (BP4) is %sset\n", (status & (1 << 5)) ? "" : "not "); case 3: msg_cdbg("Chip status register: Block Protect 3 (BP3) is %sset\n", (status & (1 << 5)) ? "" : "not "); case 2: msg_cdbg("Chip status register: Block Protect 2 (BP2) is %sset\n", (status & (1 << 4)) ? "" : "not "); case 1: msg_cdbg("Chip status register: Block Protect 1 (BP1) is %sset\n", (status & (1 << 3)) ? "" : "not "); case 0: msg_cdbg("Chip status register: Block Protect 0 (BP0) is %sset\n", (status & (1 << 2)) ? "" : "not "); } } ------------------------------------------------------------------------------------------- ------------------------------- Pablo Cases, M.Sc. Senior Software Engineer FlatFrog Laboratories AB Traktorvägen 11

1 0

Re: [flashrom] Dediprog SF100 problem
by Pablo Cases 10 Sep '14

10 Sep '14

I submitted a patch two weeks ago for SF100 with firmware version 5.5.1, but it has not been acked yet though. My (limited) experience with flashrom was that the mainline does not support SF100 with 5.5.1 firmware. Amongst the problems I encountered was that the Read Status Register 1 reply was incorrect for (at least) WEL and BUSY bits on a standalone W25Q64BV part. Possibly the other bits (e.g. SRP0) were also affected… So if you can’t find a hardware reason for your problems you could check if my patch solves your problems. /Regards, Pablo -------------------------------- Senior Software Engineer FlatFrog Laboratories AB From: flashrom [mailto:flashrom-bounces@flashrom.org] On Behalf Of David Hendricks Sent: Wednesday, September 10, 2014 12:48 AM To: Sofer, Yehoshua Cc: flashrom(a)flashrom.org Subject: Re: [flashrom] Dediprog SF100 problem On Tue, Sep 9, 2014 at 4:43 AM, Sofer, Yehoshua <yehoshua.sofer(a)intel.com<mailto:yehoshua.sofer@intel.com>> wrote: Hi, I have Dediprog SF100 programmer with firmware version 5.5.1 When I try to write to the chip I got an error: “Some block protection in effect, disabling... Block protection could not be disabled!” Is there any way to resolve this? Is the chip you are trying to reprogram soldered onto the mainboard and, if so, is the write-protect pin grounded? Does the chip you are using have a "one time program" function enabled that will permanently enable block protection regardless of the write-protect pin state? For example, if you have a W25Q64DW and both SRP1 and SRP0 are set, then the status register protect bits become permanently locked. Regards, Yehoshua Sofer Platform Application Engineering – Israel [cid:image001.jpg@01CC3EF1.1A8ED330] Networking Division, Intel Corporation • yehoshua.sofer(a)intel.com<mailto:yehoshua.sofer@intel.com> Cell +972 (54)3239840<tel:%2B972%20%2854%293239840> --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ flashrom mailing list flashrom(a)flashrom.org<mailto:flashrom@flashrom.org> http://www.flashrom.org/mailman/listinfo/flashrom -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

[PATCH] Fix Rangeley/Baytrail ich_desc density issues (09/10)
by Tai-Hong (Type) Wu 10 Sep '14

10 Sep '14

Dear flashrom list, This patch tries to fix comp1/2_density issues on Rangeley/Baytrail platforms with "dual flash dev installed". Patch is based on r1850, guess it might work as well for r1844 or later rev. Signed-off-by: T.H.Wu Type <thwu(a)lunartoday.com> From: "Type T.H.Wu" <thwu(a)lunartoday.com> Date: Wed, 10 Sep 2014 14:20:54 +0800 Subject: [PATCH] Rangeley/Baytrail comp1/2_density fix --- ich_descriptors.c | 11 +++++------ ich_descriptors.h | 9 ++++++++- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/ich_descriptors.c b/ich_descriptors.c index 1966f66..d041149 100644 --- a/ich_descriptors.c +++ b/ich_descriptors.c @@ -127,7 +127,8 @@ static const char *pprint_density(enum ich_chipset cs, const struct ich_descript case CHIPSET_ICH10: case CHIPSET_5_SERIES_IBEX_PEAK: case CHIPSET_6_SERIES_COUGAR_POINT: - case CHIPSET_7_SERIES_PANTHER_POINT: { + case CHIPSET_7_SERIES_PANTHER_POINT: + case CHIPSET_BAYTRAIL: { uint8_t size_enc; if (idx == 0) { size_enc = desc->component.old.comp1_density; @@ -139,7 +140,6 @@ static const char *pprint_density(enum ich_chipset cs, const struct ich_descript return size_str[size_enc]; } case CHIPSET_8_SERIES_LYNX_POINT: - case CHIPSET_BAYTRAIL: case CHIPSET_8_SERIES_LYNX_POINT_LP: case CHIPSET_8_SERIES_WELLSBURG: case CHIPSET_9_SERIES_WILDCAT_POINT: { @@ -216,7 +216,7 @@ void prettyprint_ich_descriptor_component(enum ich_chipset cs, const struct ich_ pprint_freq(cs, desc->component.common.freq_fastread)); if (cs > CHIPSET_6_SERIES_COUGAR_POINT) msg_pdbg2("Dual Output Fast Read Support: %sabled\n", - desc->component.new.dual_output ? "dis" : "en"); + (cs == CHIPSET_BAYTRAIL ? desc->component.old.dual_output : desc->component.new.dual_output) ? "dis" : "en"); if (desc->component.FLILL == 0) msg_pdbg2("No forbidden opcodes.\n"); else { @@ -802,7 +802,6 @@ int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors msg_perr("Only ICH SPI component index 0 or 1 are supported yet.\n"); return -1; } - if (desc->content.NC == 0 && idx > 0) return 0; @@ -816,6 +815,7 @@ int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors case CHIPSET_5_SERIES_IBEX_PEAK: case CHIPSET_6_SERIES_COUGAR_POINT: case CHIPSET_7_SERIES_PANTHER_POINT: + case CHIPSET_BAYTRAIL: if (idx == 0) { size_enc = desc->component.old.comp1_density; } else { @@ -824,7 +824,6 @@ int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors size_max = 5; break; case CHIPSET_8_SERIES_LYNX_POINT: - case CHIPSET_BAYTRAIL: case CHIPSET_8_SERIES_LYNX_POINT_LP: case CHIPSET_8_SERIES_WELLSBURG: case CHIPSET_9_SERIES_WILDCAT_POINT: @@ -842,7 +841,7 @@ int getFCBA_component_density(enum ich_chipset cs, const struct ich_descriptors } if (size_enc > size_max) { - msg_perr("Density of ICH SPI component with index %d is invalid." + msg_perr("Density of ICH SPI component with index %d is invalid.\n" "Encoded density is 0x%x while maximum allowed is 0x%x.\n", idx, size_enc, size_max); return -1; diff --git a/ich_descriptors.h b/ich_descriptors.h index c41f9d9..572ee60 100644 --- a/ich_descriptors.h +++ b/ich_descriptors.h @@ -130,7 +130,14 @@ struct ich_desc_component { comp2_density :3, :11, :13, - :2; + /* + * @ Baytrail & Rangeley FLCOMP: + * (1) Comp[1|2]_desnity := [0:2] | [3:5] + * Max 16MB*2 SPI devices, ie. max value := 101101b + * (2) Daul_output supported as well + */ + dual_output :1, + :1; } old; struct { uint32_t comp1_density :4, /* new since Lynx Point/8 */ -- 1.7.11.7

1 0

[commit] r1850 - trunk
by repository service 10 Sep '14

10 Sep '14

Author: stefanct Date: Wed Sep 10 01:03:32 2014 New Revision: 1850 URL: http://flashrom.org/trac/flashrom/changeset/1850 Log: Add support for Winbond W25Q40.V chips. Read-tested by Peter Ruesch. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Sep 5 18:14:11 2014 (r1849) +++ trunk/flashchips.c Wed Sep 10 01:03:32 2014 (r1850) @@ -12940,6 +12940,46 @@ { .vendor = "Winbond", + .name = "W25Q40.V", + .bustype = BUS_SPI, + .manufacture_id = WINBOND_NEX_ID, + .model_id = WINBOND_NEX_W25Q40_V, + .total_size = 512, + .page_size = 256, + /* supports SFDP */ + /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, /* Multi I/O supported */ + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Winbond", .name = "W25Q80.V", .bustype = BUS_SPI, .manufacture_id = WINBOND_NEX_ID,

1 0

Re: [flashrom] Dediprog SF100 problem
by David Hendricks 10 Sep '14

10 Sep '14

On Tue, Sep 9, 2014 at 4:43 AM, Sofer, Yehoshua <yehoshua.sofer(a)intel.com> wrote: > Hi, > > I have Dediprog SF100 programmer with firmware version 5.5.1 > > When I try to write to the chip I got an error: > > “Some block protection in effect, disabling... Block protection could not > be disabled!” > > Is there any way to resolve this? > Is the chip you are trying to reprogram soldered onto the mainboard and, if so, is the write-protect pin grounded? Does the chip you are using have a "one time program" function enabled that will permanently enable block protection regardless of the write-protect pin state? For example, if you have a W25Q64DW and both SRP1 and SRP0 are set, then the status register protect bits become permanently locked. > > > Regards, > > Yehoshua Sofer > > *P*latform *A*pplication *E*ngineering – Israel [image: > cid:image001.jpg@01CC3EF1.1A8ED330] > > *N*etworking* D*ivision, Intel Corporation > > * *yehoshua.sofer(a)intel.com <yehoshua.sofer(a)intel.com>* > > Cell +972 (54)3239840 > > > > --------------------------------------------------------------------- > Intel Israel (74) Limited > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom > -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Dediprog SF100 problem
by Sofer, Yehoshua 09 Sep '14

09 Sep '14

Hi, I have Dediprog SF100 programmer with firmware version 5.5.1 When I try to write to the chip I got an error: "Some block protection in effect, disabling... Block protection could not be disabled!" Is there any way to resolve this? Regards, Yehoshua Sofer Platform Application Engineering - Israel [cid:image001.jpg@01CC3EF1.1A8ED330] Networking Division, Intel Corporation * yehoshua.sofer(a)intel.com<mailto:yehoshua.sofer@intel.com> Cell +972 (54)3239840 --------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.

1 0

W836xx: PCOM-B632VG-E3827-TSDV: flashrom -V
by NghiaHT 09 Sep '14

09 Sep '14

-- Hoang Trong Nghia (Mr) Software Engineer Toshiba Software Development (Vietnam) Co., Ltd 16th floor, VIT Building, 519 Kim Ma Street, Ba Dinh District, Hanoi Email: nghia.hoangtrong(a)toshiba-tsdv.com Tel: 84-4-2220 8801 Ext: 137 Note: This e-mail message may contain personal information or confidential information. If you are not the addressee of this message, please delete this message and kindly notify the sender as soon as possible - do not copy, use, or disclose this message. -- This mail was scanned by BitDefender For more information please visit http://www.bitdefender.com

1 0

Bug report - Thinkpad X60s
by Ted 05 Sep '14

05 Sep '14

x60s@x60s-ThinkPad-X60s:~/Downloads/libreboot_bin/flashrom$ sudo ./flashrom_lenovobios_sst -p internal -r factory.bin flashrom v0.9.7-unknown on Linux 3.2.0-67-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... delay loop is unreliable, trying to continue OK. Found chipset "Intel ICH7M". Enabling flash write... WARNING: SPI Configuration Lockdown activated. OK. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. x60s@x60s-ThinkPad-X60s:~/Downloads/libreboot_bin/flashrom$ sudo ./flashrom_lenovobios_macronix -p internal -r factory.bin flashrom v0.9.7-unknown on Linux 3.2.0-67-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... delay loop is unreliable, trying to continue OK. Found chipset "Intel ICH7M". Enabling flash write... WARNING: SPI Configuration Lockdown activated. OK. Found Macronix flash chip "MX25L1605D/MX25L1608D/MX25L1673E" (2048 kB, SPI) at physical address 0xffe00000. Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom(a)flashrom.org Reading flash... done. x60s@x60s-ThinkPad-X60s:~/Downloads/libreboot_bin/flashrom$

2 1

[commit] r1849 - trunk
by repository service 05 Sep '14

05 Sep '14

Author: stefanct Date: Fri Sep 5 18:14:11 2014 New Revision: 1849 URL: http://flashrom.org/trac/flashrom/changeset/1849 Log: dmi.c: Duplicate returned strings because they are meant to be freed. Without this patch dmi_shutdown calls free() on read-only strings. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dmi.c Modified: trunk/dmi.c ============================================================================== --- trunk/dmi.c Sun Aug 31 02:09:21 2014 (r1848) +++ trunk/dmi.c Fri Sep 5 18:14:11 2014 (r1849) @@ -120,18 +120,18 @@ size_t i, len; if (string_id == 0) - return "Not Specified"; + return strdup("Not Specified"); while (string_id > 1 && string_id--) { if (buf >= limit) { msg_perr("DMI table is broken (string portion out of bounds)!\n"); - return "<OUT OF BOUNDS>"; + return strdup("<OUT OF BOUNDS>"); } buf += strnlen(buf, limit - buf) + 1; } if (!*buf) /* as long as the current byte we're on isn't null */ - return "<BAD INDEX>"; + return strdup("<BAD INDEX>"); len = strnlen(buf, limit - buf); char *newbuf = malloc(len + 1);

1 0

Question about flashrom
by false 03 Sep '14

03 Sep '14

To whom it may concern : Hello, I read some command code about using the software but I didn't understand clearly how I can use it to read/write memory chips through FT2232D SPI port! Would you tell me how I can use it? or send an useful manual ... Thanks a lot...

1 0

[PATCH] Add support for AMD Bolton chipset
by Martin Roth 31 Aug '14

31 Aug '14

Add support for AMD's Bolton chipset. The SPI controller on the bolton chipset uses the same 3-bit speed settings as yangtze, but is otherwise the same as the hudson chips. Note that the Bolton RRG doesn't specify a speed setting for the bit setting of 0b111, so I'm assuming that it's the same setting as yangtze. Signed-off-by: Martin Roth <martin.roth(a)se-eng.com>

3 4

[commit] r1848 - trunk
by repository service 31 Aug '14

31 Aug '14

Author: stefanct Date: Sun Aug 31 02:09:21 2014 New Revision: 1848 URL: http://flashrom.org/trac/flashrom/changeset/1848 Log: Introduce generic shutdown_free() and remove redundant internal_shutdown(). The former will be useful in cases where cleanup equals a simple call to free(). Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flash.h trunk/flashrom.c trunk/internal.c Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sun Aug 31 01:39:51 2014 (r1847) +++ trunk/flash.h Sun Aug 31 02:09:21 2014 (r1848) @@ -54,6 +54,7 @@ #define PRIuCHIPSIZE PRIu32 int register_shutdown(int (*function) (void *data), void *data); +int shutdown_free(void *data); void *programmer_map_flash_region(const char *descr, uintptr_t phys_addr, size_t len); void programmer_unmap_flash_region(void *virt_addr, size_t len); void programmer_delay(unsigned int usecs); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sun Aug 31 01:39:51 2014 (r1847) +++ trunk/flashrom.c Sun Aug 31 02:09:21 2014 (r1848) @@ -373,6 +373,12 @@ static int check_block_eraser(const struct flashctx *flash, int k, int log); +int shutdown_free(void *data) +{ + free(data); + return 0; +} + /* Register a function to be executed on programmer shutdown. * The advantage over atexit() is that you can supply a void pointer which will * be used as parameter to the registered function upon programmer shutdown. Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Sun Aug 31 01:39:51 2014 (r1847) +++ trunk/internal.c Sun Aug 31 02:09:21 2014 (r1848) @@ -158,11 +158,6 @@ enum chipbustype internal_buses_supported = BUS_NONE; -static int internal_shutdown(void *data) -{ - return 0; -} - int internal_init(void) { #if __FLASHROM_LITTLE_ENDIAN__ @@ -237,8 +232,6 @@ if (rget_io_perms()) return 1; - if (register_shutdown(internal_shutdown, NULL)) - return 1; /* Default to Parallel/LPC/FWH flash devices. If a known host controller * is found, the host controller init routine sets the

1 0

Re: [flashrom] [PATCH] Refine physical address mapping of flash chips.
by Stefan Tauner 31 Aug '14

31 Aug '14

On Wed, 20 Aug 2014 01:15:43 +0200 Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > + msg_pdbg2("Successfully mapped flash chip \"%s\" at physical address 0x%0*" PRIxPTR ".\n", > + fill_flash->chip->name, PRIxPTR_WIDTH, fill_flash->physical_memory); > + Forgot to remove these lines, please ignore. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[commit] r1847 - trunk
by repository service 31 Aug '14

31 Aug '14

Author: stefanct Date: Sun Aug 31 01:39:51 2014 New Revision: 1847 URL: http://flashrom.org/trac/flashrom/changeset/1847 Log: Refine physical address mapping of flash chips. - Create distinct functions for mapping and unmapping for flash chips. - Map only when needed: map before probing and unmap immediately after it. Map again when a single chip was probed successfully before taking any actual actions and clean up afterwards. - Map special function chip registers centrally together with flash space instead of within (some) probing methods after successful probes. - Save the used base addresses of the mappings in struct flashctx as well. - Do not try to (un)map the zero-sized chip definitions that are merely hacks. This also fixes the printing of wrong warnings for these chip definitions introduced in r1765. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/82802ab.c trunk/cli_classic.c trunk/flash.h trunk/flashrom.c trunk/jedec.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Wed Aug 20 20:56:35 2014 (r1846) +++ trunk/82802ab.c Sun Aug 31 01:39:51 2014 (r1847) @@ -83,9 +83,6 @@ if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id) return 0; - if (flash->chip->feature_bits & FEATURE_REGISTERMAP) - map_flash_registers(flash); - return 1; } Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Wed Aug 20 20:56:35 2014 (r1846) +++ trunk/cli_classic.c Sun Aug 31 01:39:51 2014 (r1847) @@ -481,8 +481,14 @@ ret = 1; goto out_shutdown; } + if (map_flash(&flashes[0]) != 0) { + free(flashes[0].chip); + ret = 1; + goto out_shutdown; + } msg_cinfo("Please note that forced reads most likely contain garbage.\n"); ret = read_flash_to_file(&flashes[0], filename); + unmap_flash(&flashes[0]); free(flashes[0].chip); goto out_shutdown; } @@ -525,6 +531,12 @@ if (write_it && !dont_verify_it) verify_it = 1; + /* Map the selected flash chip again. */ + if (map_flash(fill_flash) != 0) { + ret = 1; + goto out_shutdown; + } + /* FIXME: We should issue an unconditional chip reset here. This can be * done once we have a .reset function in struct flashchip. * Give the chip time to settle. @@ -532,6 +544,7 @@ programmer_delay(100000); ret |= doit(fill_flash, force, filename, read_it, write_it, erase_it, verify_it); + unmap_flash(fill_flash); out_shutdown: programmer_shutdown(); out: Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Wed Aug 20 20:56:35 2014 (r1846) +++ trunk/flash.h Sun Aug 31 01:39:51 2014 (r1847) @@ -48,9 +48,9 @@ /* Types and macros regarding the maximum flash space size supported by generic code. */ typedef uint32_t chipoff_t; /* Able to store any addressable offset within a supported flash memory. */ typedef uint32_t chipsize_t; /* Able to store the number of bytes of any supported flash memory. */ -#define FL_MAX_CHIPADDR_BITS (24) -#define FL_MAX_CHIPADDR ((chipoff_t)(1ULL<<FL_MAX_CHIPADDR_BITS)-1) -#define PRIxCHIPADDR "06"PRIx32 +#define FL_MAX_CHIPOFF_BITS (24) +#define FL_MAX_CHIPOFF ((chipoff_t)(1ULL<<FL_MAX_CHIPOFF_BITS)-1) +#define PRIxCHIPOFF "06"PRIx32 #define PRIuCHIPSIZE PRIu32 int register_shutdown(int (*function) (void *data), void *data); @@ -209,8 +209,14 @@ struct flashctx { struct flashchip *chip; + /* FIXME: The memory mappings should be saved in a more structured way. */ + /* The physical_* fields store the respective addresses in the physical address space of the CPU. */ + uintptr_t physical_memory; + /* The virtual_* fields store where the respective physical address is mapped into flashrom's address + * space. A value equivalent to (chipaddr)ERROR_PTR indicates an invalid mapping (or none at all). */ chipaddr virtual_memory; - /* Some flash devices have an additional register space. */ + /* Some flash devices have an additional register space; semantics are like above. */ + uintptr_t physical_registers; chipaddr virtual_registers; struct registered_master *mst; }; @@ -252,7 +258,8 @@ /* flashrom.c */ extern const char flashrom_version[]; extern const char *chip_to_probe; -void map_flash_registers(struct flashctx *flash); +int map_flash(struct flashctx *flash); +void unmap_flash(struct flashctx *flash); int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int erase_flash(struct flashctx *flash); int probe_flash(struct registered_master *mst, int startchip, struct flashctx *fill_flash, int force); Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Wed Aug 20 20:56:35 2014 (r1846) +++ trunk/flashrom.c Sun Aug 31 01:39:51 2014 (r1847) @@ -479,6 +479,7 @@ void programmer_unmap_flash_region(void *virt_addr, size_t len) { programmer_table[programmer].unmap_flash_region(virt_addr, len); + msg_gspew("%s: unmapped 0x%0*" PRIxPTR "\n", __func__, PRIxPTR_WIDTH, (uintptr_t)virt_addr); } void chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) @@ -528,14 +529,6 @@ programmer_table[programmer].delay(usecs); } -void map_flash_registers(struct flashctx *flash) -{ - size_t size = flash->chip->total_size * 1024; - /* Flash registers live 4 MByte below the flash. */ - /* FIXME: This is incorrect for nonstandard flashbase. */ - flash->virtual_registers = (chipaddr)programmer_map_flash_region("flash chip registers", (0xFFFFFFFF - 0x400000 - size + 1), size); -} - int read_memmapped(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len) { @@ -1052,12 +1045,64 @@ return limitexceeded; } +void unmap_flash(struct flashctx *flash) +{ + if (flash->virtual_registers != (chipaddr)ERROR_PTR) { + programmer_unmap_flash_region((void *)flash->virtual_registers, flash->chip->total_size * 1024); + flash->physical_registers = 0; + flash->virtual_registers = (chipaddr)ERROR_PTR; + } + + if (flash->virtual_memory != (chipaddr)ERROR_PTR) { + programmer_unmap_flash_region((void *)flash->virtual_memory, flash->chip->total_size * 1024); + flash->physical_memory = 0; + flash->virtual_memory = (chipaddr)ERROR_PTR; + } +} + +int map_flash(struct flashctx *flash) +{ + /* Init pointers to the fail-safe state to distinguish them later from legit values. */ + flash->virtual_memory = (chipaddr)ERROR_PTR; + flash->virtual_registers = (chipaddr)ERROR_PTR; + + /* FIXME: This avoids mapping (and unmapping) of flash chip definitions with size 0. + * These are used for various probing-related hacks that would not map successfully anyway and should be + * removed ASAP. */ + if (flash->chip->total_size == 0) + return 0; + + const chipsize_t size = flash->chip->total_size * 1024; + uintptr_t base = flashbase ? flashbase : (0xffffffff - size + 1); + void *addr = programmer_map_flash_region(flash->chip->name, base, size); + if (addr == ERROR_PTR) { + msg_perr("Could not map flash chip %s at 0x%0*" PRIxPTR ".\n", + flash->chip->name, PRIxPTR_WIDTH, base); + return 1; + } + flash->physical_memory = base; + flash->virtual_memory = (chipaddr)addr; + + /* FIXME: Special function registers normally live 4 MByte below flash space, but it might be somewhere + * completely different on some chips and programmers, or not mappable at all. + * Ignore these problems for now and always report success. */ + if (flash->chip->feature_bits & FEATURE_REGISTERMAP) { + base = 0xffffffff - size - 0x400000 + 1; + addr = programmer_map_flash_region("flash chip registers", base, size); + if (addr == ERROR_PTR) { + msg_pdbg2("Could not map flash chip registers %s at 0x%0*" PRIxPTR ".\n", + flash->chip->name, PRIxPTR_WIDTH, base); + return 0; + } + flash->physical_registers = base; + flash->virtual_registers = (chipaddr)addr; + } + return 0; +} + int probe_flash(struct registered_master *mst, int startchip, struct flashctx *flash, int force) { const struct flashchip *chip; - unsigned long base = 0; - char location[64]; - uint32_t size; enum chipbustype buses_common; char *tmp; @@ -1082,9 +1127,8 @@ memcpy(flash->chip, chip, sizeof(struct flashchip)); flash->mst = mst; - size = flash->chip->total_size * 1024; - base = flashbase ? flashbase : (0xffffffff - size + 1); - flash->virtual_memory = (chipaddr)programmer_map_flash_region("flash chip", base, size); + if (map_flash(flash) != 0) + return -1; /* We handle a forced match like a real match, we just avoid probing. Note that probe_flash() * is only called with force=1 after normal probing failed. @@ -1133,8 +1177,7 @@ break; /* Not the first flash chip detected on this bus, and it's just a generic match. Ignore it. */ notfound: - programmer_unmap_flash_region((void *)flash->virtual_memory, size); - flash->virtual_memory = (chipaddr)NULL; + unmap_flash(flash); free(flash->chip); flash->chip = NULL; } @@ -1142,25 +1185,28 @@ if (!flash->chip) return -1; + + tmp = flashbuses_to_text(flash->chip->bustype); + msg_cinfo("%s %s flash chip \"%s\" (%d kB, %s) ", force ? "Assuming" : "Found", + flash->chip->vendor, flash->chip->name, flash->chip->total_size, tmp); + free(tmp); #if CONFIG_INTERNAL == 1 if (programmer_table[programmer].map_flash_region == physmap) - snprintf(location, sizeof(location), "at physical address 0x%lx", base); + msg_cinfo("mapped at physical address 0x%0*" PRIxPTR ".\n", + PRIxPTR_WIDTH, flash->physical_memory); else #endif - snprintf(location, sizeof(location), "on %s", programmer_table[programmer].name); + msg_cinfo("on %s.\n", programmer_table[programmer].name); - tmp = flashbuses_to_text(flash->chip->bustype); - msg_cinfo("%s %s flash chip \"%s\" (%d kB, %s) %s.\n", force ? "Assuming" : "Found", - flash->chip->vendor, flash->chip->name, flash->chip->total_size, tmp, location); - free(tmp); - - /* Flash registers will not be mapped if the chip was forced. Lock info - * may be stored in registers, so avoid lock info printing. - */ + /* Flash registers may more likely not be mapped if the chip was forced. + * Lock info may be stored in registers, so avoid lock info printing. */ if (!force) if (flash->chip->printlock) flash->chip->printlock(flash); + /* Get out of the way for later runs. */ + unmap_flash(flash); + /* Return position of matching chip. */ return chip - flashchips; } Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Wed Aug 20 20:56:35 2014 (r1846) +++ trunk/jedec.c Sun Aug 31 01:39:51 2014 (r1847) @@ -166,9 +166,6 @@ if (man_id != chip->manufacture_id || dev_id != chip->model_id) return 0; - if (chip->feature_bits & FEATURE_REGISTERMAP) - map_flash_registers(flash); - return 1; } @@ -287,9 +284,6 @@ if (largeid1 != chip->manufacture_id || largeid2 != chip->model_id) return 0; - if (chip->feature_bits & FEATURE_REGISTERMAP) - map_flash_registers(flash); - return 1; }

1 0

Re: [flashrom] failed stumpy
by Stefan Tauner 29 Aug '14

29 Aug '14

On Thu, 28 Aug 2014 21:47:32 -0700 Maison Pulaski <maisonpulaski(a)gmail.com> wrote: > Hello John (if this is John?), Hi, no, we are the flashrom mailing list. Flashrom is the tool underneath John's script that does the actual flash handling. John is subscribed to the list though and should answer in more detail soon-ish, I presume. > I got a scary warning error when trying to flash the Stumpy Rom... 25 bytes of the whole image could not be written. It is probably harmless and just because John's image differs in some write-protected regions which are benign, but without knowing exactly where the differences are you can not be sure. If you don't get a reply from John in a timely manner, I would suggest that you write your backup and we investigate it further when your laptop is in a safe state. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] failed stumpy
by John Lewis 29 Aug '14

29 Aug '14

No, this isn't me. Could you please keep to the G+ community and/or website. Flashrom is a utility used as part of the script, not written or maintained by me, so don't direct queries at Flashrom devs. On 29/08/14 05:47, Maison Pulaski wrote: > Hello John (if this is John?), > > I got a scary warning error when trying to flash the Stumpy Rom... > > "About to flash new ROM, repeat 'If this bricks my Chromebook/box, on my > head be it!' observing exact case and punctuation: If this bricks my > Chromebook/box, on my head be it! > > 1+0 records in > 1+0 records out > 4096 bytes (4.1 kB) copied, 0.00286514 s, 1.4 MB/s > flashrom v0.9.4 : cac0a4a : May 09 2014 16:55:24 UTC on Linux 3.4.0 > (x86_64), built with libpci 3.1.10, GCC 4.8.x-google 20131105 > (prerelease), little endian > VERIFY FAILED at 0x00408fbc! Expected=0x66, Read=0xff, failed byte count > from 0x00000000-0x007fffff: 0x19 > Your flash chip is in an unknown state. > Get help on IRC at irc.freenode.net <http://irc.freenode.net> (channel > #flashrom) or > mail flashrom(a)flashrom.org <mailto:flashrom@flashrom.org> with FAILED: > your board name in the subject line! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > Erasing and writing flash chip... Verifying flash... FAILED" > > So, I am not exactly sure what to do now? > > Sorry. > > I did send you a little something (92R63514PY632983E). I know that it is > not payment for services rendered and if you can't help me I totally > understand. It is just a little something for the help you have already > given. > > Thanks, > Maison Pulaski > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

1 0

failed stumpy
by Maison Pulaski 29 Aug '14

29 Aug '14

Hello John (if this is John?), I got a scary warning error when trying to flash the Stumpy Rom... "About to flash new ROM, repeat 'If this bricks my Chromebook/box, on my head be it!' observing exact case and punctuation: If this bricks my Chromebook/box, on my head be it! 1+0 records in 1+0 records out 4096 bytes (4.1 kB) copied, 0.00286514 s, 1.4 MB/s flashrom v0.9.4 : cac0a4a : May 09 2014 16:55:24 UTC on Linux 3.4.0 (x86_64), built with libpci 3.1.10, GCC 4.8.x-google 20131105 (prerelease), little endian VERIFY FAILED at 0x00408fbc! Expected=0x66, Read=0xff, failed byte count from 0x00000000-0x007fffff: 0x19 Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! Erasing and writing flash chip... Verifying flash... FAILED" So, I am not exactly sure what to do now? Sorry. I did send you a little something (92R63514PY632983E). I know that it is not payment for services rendered and if you can't help me I totally understand. It is just a little something for the help you have already given. Thanks, Maison Pulaski

1 0

Re: [flashrom] [RFC] split code into sub-directories
by Carl-Daniel Hailfinger 28 Aug '14

28 Aug '14

Hi Sean, nice to see you're back. Am 28.08.2014 00:57 schrieb Sean Nelson: > Move files into a directory structure, and edit Makefiles to facilitate > future compilation granularity. For Example, compile a focused version of > flashrom for a specific coreboot motherboard. > > subversion operations: > svn mkdir {chips,programmers,libraries} > > svn move 82802ab.c chips/ > svn move at45db.c chips/ > svn move chipdrivers.h chips/ > svn move en29lv640b.c chips/ > svn move flashchips.c chips/ > svn move flashchips.h chips/ > svn move jedec.c chips/ > svn move opaque.c chips/ > svn move sfdp.c chips/ > svn move spi25.c chips/ > svn move spi25_statusreg.c chips/ > svn move spi.c chips/ > svn move spi.h chips/ > svn move sst28sf040.c chips/ > svn move sst49lfxxxc.c chips/ > svn move sst_fwhub.c chips/ > svn move stm50.c chips/ > svn move w29ee011.c chips/ > svn move w39.c chips/ > > svn move flashrom.c libraries/ > svn move helpers.c libraries/ > svn move layout.c libraries/ > svn move programmer.c libraries/ > svn move programmer.h libraries/ > svn move udelay.c libraries/ > > svn move amd_imc.c programmers/ > svn move atahpt.c programmers/ > svn move atavia.c programmers/ > svn move bitbang_spi.c programmers/ > svn move board_enable.c programmers/ > svn move buspirate_spi.c programmers/ > svn move cbtable.c programmers/ > svn move chipset_enable.c programmers/ > svn move coreboot_tables.h programmers/ > svn move dediprog.c programmers/ > svn move dmi.c programmers/ > svn move drkaiser.c programmers/ > svn move dummyflasher.c programmers/ > svn move ft2232_spi.c programmers/ > svn move gfxnvidia.c programmers/ > svn move hwaccess.c programmers/ > svn move hwaccess.h programmers/ > svn move ich_descriptors.c programmers/ > svn move ich_descriptors.h programmers/ > svn move ichspi.c programmers/ > svn move internal.c programmers/ > svn move it8212.c programmers/ > svn move it85spi.c programmers/ > svn move it87spi.c programmers/ > svn move linux_spi.c programmers/ > svn move mcp6x_spi.c programmers/ > svn move nic3com.c programmers/ > svn move nicintel.c programmers/ > svn move nicintel_eeprom.c programmers/ > svn move nicintel_spi.c programmers/ > svn move nicnatsemi.c programmers/ > svn move nicrealtek.c programmers/ > svn move ogp_spi.c programmers/ > svn move pcidev.c programmers/ > svn move physmap.c programmers/ > svn move pony_spi.c programmers/ > svn move processor_enable.c programmers/ > svn move rayer_spi.c programmers/ > svn move satamv.c programmers/ > svn move satasii.c programmers/ > svn move sb600spi.c programmers/ > svn move serial.c programmers/ > svn move serprog.c programmers/ > svn move serprog.h programmers/ > svn move usbblaster_spi.c programmers/ > svn move wbsio_spi.c programmers/ Good idea, I think we had a similar suggestion already in the past, but it went nowhere because the patch queue was too big. I would like to get the probing stuff in first, though. Rebasing that would be too painful. Regards, Carl-Daniel

1 0

[RFC] split code into sub-directories
by Sean Nelson 28 Aug '14

28 Aug '14

Move files into a directory structure, and edit Makefiles to facilitate future compilation granularity. For Example, compile a focused version of flashrom for a specific coreboot motherboard. subversion operations: svn mkdir {chips,programmers,libraries} svn move 82802ab.c chips/ svn move at45db.c chips/ svn move chipdrivers.h chips/ svn move en29lv640b.c chips/ svn move flashchips.c chips/ svn move flashchips.h chips/ svn move jedec.c chips/ svn move opaque.c chips/ svn move sfdp.c chips/ svn move spi25.c chips/ svn move spi25_statusreg.c chips/ svn move spi.c chips/ svn move spi.h chips/ svn move sst28sf040.c chips/ svn move sst49lfxxxc.c chips/ svn move sst_fwhub.c chips/ svn move stm50.c chips/ svn move w29ee011.c chips/ svn move w39.c chips/ svn move flashrom.c libraries/ svn move helpers.c libraries/ svn move layout.c libraries/ svn move programmer.c libraries/ svn move programmer.h libraries/ svn move udelay.c libraries/ svn move amd_imc.c programmers/ svn move atahpt.c programmers/ svn move atavia.c programmers/ svn move bitbang_spi.c programmers/ svn move board_enable.c programmers/ svn move buspirate_spi.c programmers/ svn move cbtable.c programmers/ svn move chipset_enable.c programmers/ svn move coreboot_tables.h programmers/ svn move dediprog.c programmers/ svn move dmi.c programmers/ svn move drkaiser.c programmers/ svn move dummyflasher.c programmers/ svn move ft2232_spi.c programmers/ svn move gfxnvidia.c programmers/ svn move hwaccess.c programmers/ svn move hwaccess.h programmers/ svn move ich_descriptors.c programmers/ svn move ich_descriptors.h programmers/ svn move ichspi.c programmers/ svn move internal.c programmers/ svn move it8212.c programmers/ svn move it85spi.c programmers/ svn move it87spi.c programmers/ svn move linux_spi.c programmers/ svn move mcp6x_spi.c programmers/ svn move nic3com.c programmers/ svn move nicintel.c programmers/ svn move nicintel_eeprom.c programmers/ svn move nicintel_spi.c programmers/ svn move nicnatsemi.c programmers/ svn move nicrealtek.c programmers/ svn move ogp_spi.c programmers/ svn move pcidev.c programmers/ svn move physmap.c programmers/ svn move pony_spi.c programmers/ svn move processor_enable.c programmers/ svn move rayer_spi.c programmers/ svn move satamv.c programmers/ svn move satasii.c programmers/ svn move sb600spi.c programmers/ svn move serial.c programmers/ svn move serprog.c programmers/ svn move serprog.h programmers/ svn move usbblaster_spi.c programmers/ svn move wbsio_spi.c programmers/

1 0

Re: [flashrom] [PATCH 1/3] Refine Flash Component descriptor handling.
by Stefan Tauner 27 Aug '14

27 Aug '14

On Wed, 27 Aug 2014 16:44:23 -0400 "Wen Wang" <wen.wang(a)adiengineering.com> wrote: > Hi Stefan, > > Looks like my problem is in the flash descriptor that I received from intel. We generated our own descriptor and I am now able to read and write flash. I will see if I could figure out the difference in the descriptor. > Hi, please see http://www.flashrom.org/pipermail/flashrom/2014-August/012856.html I have explained the problem back then already. Apparently you are not the only one with the problem. Maybe we should add a workaround for it in one way or another... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH v2] Enable Dediprog SF100 programmers with FW 5.5.1
by Pablo Cases 26 Aug '14

26 Aug '14

v2 changes: * Major v1 bug fixed: Partial reads and writes are now supported. Read, Erase, Write tested up to 8MiB on Winbond W25Q64BV part. * Trivial v1 bug fixed: Block and Sector erase commands functional (previously only Chip Erase commands were functional). Signed-off-by: Pablo Cases <pablo.cases at flatfrog.com> Index: dediprog.c =================================================================== --- dediprog.c (revision 1846) +++ dediprog.c (working copy) @@ -101,8 +101,13 @@ target_leds = leds; } - ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, target_leds, + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, (target_leds << 8) | 0x09, 0x0, NULL, 0x0, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x07, 0x09, target_leds, + NULL, 0x0, DEFAULT_TIMEOUT); + if (ret != 0x0) { msg_perr("Command Set LED 0x%x failed (%s)!\n", leds, usb_strerror()); @@ -216,8 +221,28 @@ const char count_and_chunk[] = {count & 0xff, (count >> 8) & 0xff, chunksize & 0xff, - (chunksize >> 8) & 0xff}; + (chunksize >> 8) & 0xff, + 0xff, + 0x00, + (start % 0x10000) & 0xff, + ((start % 0x10000) >> 8) & 0xff, + (start / 0x10000) & 0xff, + ((start / 0x10000) >> 8) & 0xff}; + unsigned int count_and_chunk_size; + /* Reverse engineering note: + * ======================== + * Omitting the added 6 bytes to count_and_chunk[] on SF100 FW 5.5.1 + * results in SF100 to incorrectly issue 0x0B (Fast Read) command with + * start at SPI address 0xF30000 instead of the expected address 0x0. + * (On a 8MiB W25Q64.V chip this wraps around to physical address 0x730000). + * Possibly a result of SF100 FW 5.5.1 receive data buffer initialization. + */ + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + count_and_chunk_size = 10; + else + count_and_chunk_size = 4; + if ((start % chunksize) || (len % chunksize)) { msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " "at flashrom(a)flashrom.org\n", __func__, start, len); @@ -230,10 +255,15 @@ /* Command Read SPI Bulk. No idea which read command is used on the * SPI side. */ - ret = usb_control_msg(dediprog_handle, 0x42, 0x20, start % 0x10000, + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0x42, 0x20, 0x00, + 0x00, (char *)count_and_chunk, + count_and_chunk_size, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x20, start % 0x10000, start / 0x10000, (char *)count_and_chunk, - sizeof(count_and_chunk), DEFAULT_TIMEOUT); - if (ret != sizeof(count_and_chunk)) { + count_and_chunk_size, DEFAULT_TIMEOUT); + if (ret != count_and_chunk_size) { msg_perr("Command Read SPI Bulk failed, %i %s!\n", ret, usb_strerror()); return 1; @@ -316,9 +346,37 @@ * space in a USB bulk transfer must be filled with 0xff padding. */ const unsigned int count = len / chunksize; - const char count_and_cmd[] = {count & 0xff, (count >> 8) & 0xff, 0x00, dedi_spi_cmd}; + const char count_and_cmd[] = {count & 0xff, + (count >> 8) & 0xff, + 0x00, + dedi_spi_cmd, + 0xff, + 0x00, + (start % 0x10000) & 0xff, + ((start % 0x10000) >> 8) & 0xff, + (start / 0x10000) & 0xff, + ((start / 0x10000) >> 8) & 0xff}; + unsigned int count_and_cmd_size; char usbbuf[512]; - + + /* Reverse engineering note: + * ======================== + * Omitting the added 6 bytes to count_and_cmd[] on SF100 FW 5.5.1 + * results in SF100 to incorrectly issue 0x02 (Page Program) command with + * start at SPI address 0xF30000 instead of the expected address 0x0. + * (On a 8MiB W25Q64.V chip this wraps around to physical address 0x730000). + * Possibly a result of SF100 FW 5.5.1 receive data buffer initialization. + * + * Issuing a single spi_bulk_write() command with this appendage will + * correct the addressing so that all further spi_bulk_write() commands + * (with or without the appendage) will start at SPI address 0x0. + * Only a power cycle of the SF100 will reintroduce the error. + */ + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + count_and_cmd_size = 10; + else + count_and_cmd_size = 4; + /* * We should change this check to * chunksize > 512 @@ -342,9 +400,13 @@ /* Command Write SPI Bulk. No idea which write command is used on the * SPI side. */ - ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, start / 0x10000, - (char *)count_and_cmd, sizeof(count_and_cmd), DEFAULT_TIMEOUT); - if (ret != sizeof(count_and_cmd)) { + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, 0x00, 0x00, + (char *)count_and_cmd, count_and_cmd_size, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x30, start % 0x10000, start / 0x10000, + (char *)count_and_cmd, count_and_cmd_size, DEFAULT_TIMEOUT); + if (ret != count_and_cmd_size) { msg_perr("Command Write SPI Bulk failed, %i %s!\n", ret, usb_strerror()); return 1; @@ -447,10 +509,28 @@ msg_perr("Untested readcnt=%i, aborting.\n", readcnt); return 1; } - - ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0xff, - readcnt ? 0x1 : 0x0, (char *)writearr, writecnt, - DEFAULT_TIMEOUT); + + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + if (*writearr == 0x6 || // Write Enable + *writearr == 0x60 || *writearr == 0xc7 || // Chip Erase + *writearr == 0x52 || *writearr == 0xd8 || // Block Erase + *writearr == 0x20) // Sector Erase + /* These commands are treated differently otherwise + * Read Status Register-1 (05h) will return incorrect + * results for WEL and WIP bits + * (at least on Winbond W25Q64BV Flash) + */ + ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0x0, + 0x0, (char *)writearr, writecnt, + DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0x1, + 0x0, (char *)writearr, writecnt, + DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0x42, 0x1, 0xff, + readcnt ? 0x1 : 0x0, (char *)writearr, writecnt, + DEFAULT_TIMEOUT); if (ret != writecnt) { msg_perr("Send SPI failed, expected %i, got %i %s!\n", writecnt, ret, usb_strerror()); @@ -459,8 +539,13 @@ if (!readcnt) return 0; memset(readarr, 0, readcnt); - ret = usb_control_msg(dediprog_handle, 0xc2, 0x01, 0xbb8, 0x0000, - (char *)readarr, readcnt, DEFAULT_TIMEOUT); + + if (dediprog_firmwareversion >= FIRMWARE_VERSION(5,5,1)) + ret = usb_control_msg(dediprog_handle, 0xc2, 0x1, 0x1, 0x0, + (char *)readarr, readcnt, DEFAULT_TIMEOUT); + else + ret = usb_control_msg(dediprog_handle, 0xc2, 0x1, 0xbb8, 0x0000, + (char *)readarr, readcnt, DEFAULT_TIMEOUT); if (ret != readcnt) { msg_perr("Receive SPI failed, expected %i, got %i %s!\n", readcnt, ret, usb_strerror()); @@ -485,6 +570,12 @@ " String!\n"); return 1; } + /* Reverse engineering note: + * ======================== + * Dediprog Software SF6.0.4.33 application sends the devicestring + * command with wValue and wIndex values of 0x0 instead of 0xff. + * Both commands yield the same result, so nothing is changed for now. + */ /* Command Receive Device String. */ memset(buf, 0, sizeof(buf)); ret = usb_control_msg(dediprog_handle, 0xc2, 0x8, 0xff, 0xff, buf,

1 0

AT45DB011D read not working
by The Raven 25 Aug '14

25 Aug '14

Read is not working, other things (yet) not tested. See log for details. It ends with a "Speicherzugriffsfehler" which means "Segmentation fault". I can do more tests if needed. Tell me what you need. :-) THX

3 9

Re: [flashrom] [patch] exit when the same filename is used for reading/writing flash chip content and to store log output
by Daniele Forsi 25 Aug '14

25 Aug '14

2014-08-21 13:37 GMT+02:00 Idwer Vollering: > Tested on physical hardware, built on FreeBSD (less portability 'headaches'). > > Signed-off-By: Idwer Vollering <vidwer(a)gmail.com> > > Index: cli_output.c > =================================================================== > --- cli_output.c (revision 1846) > +++ cli_output.c (working copy) > @@ -52,8 +52,12 @@ > msg_gerr("No logfile name specified.\n"); > return 1; > } > - if ((logfile = fopen(filename, "w")) == NULL) { > + if ((logfile = fopen(filename, "xw")) == NULL) { > msg_gerr("Error: opening log file \"%s\" failed: > %s\n", filename, strerror(errno)); > + msg_gdbg("This means that flashrom can't write log output\n" \ > + "to the file you specified (\"%s\"),\n" \ > + "or you are using the same filename to read > from/write to (-r / -w)\n" \ > + "and write the log output to (-o).\n", filename); > return 1; > } > return 0; "xw" always fails if filename exists even if it's not the same used for read or write, yes strerror() will have printed "File exists" but having to delete the log file by hand is inconvenient (I always create a log file "just in case" but I rarely need it) -- Daniele Forsi

1 0

Asus x75vd laptop repaired, thanks !
by Alex 25 Aug '14

25 Aug '14

Hi, Thanks for this ! You save my x75vd laptop ! One arduino, one resistor on a breadboard. I use the improved 3.3v version by Simon Inns but without 4050n because I didn't have this. The 4050N is a non-inverting hex buffer IC: http://www.nxp.com/documents/data_sheet/HEF4050B.pdf See my post about it here : http://www.waitingforfriday.com/forum/viewtopic.php?f=10&t=3359 My Circuit : https://www.dropbox.com/s/95gb5gh0yp84hog/2014-08-23%2018.43.54.jpg?dl=0 I used : - Ubuntu to install and upload serprog-duino quickly - SystemRescueCd (live CD with flashrom) to run flashrom with command line I tried flashrom windows version withtout success (command line : mingw32-w64-flashrom-r1781.exe -p serprog:dev=COM3:115200 -r coreboot.rom) The hardest was to find a real rom extraction and not the bios given on the Asus website (wich is smaller than the EEPROM) Thanks a lot :)

1 0

Re: [flashrom] [PATCH] Add SUPPORT_EMAIL compiler flag.
by David Hendricks 21 Aug '14

21 Aug '14

Overall I like the concept of this patch, and I think it should get merged. I'm not entirely convinced that redirecting people using the chromiumos branch to a separate list will significantly reduce the traffic on this list though. AFAICT most people who report issues are trying to flash manually with upstream flashrom (or a version bundled with their distro) and encounter issues with the ME or some such. On Thu, Aug 21, 2014 at 1:16 AM, Stefan Tauner < stefan.tauner(a)alumni.tuwien.ac.at> wrote: > Use it throughout the source to allow for printing alternative support > email > addresses (e.g. for distributions, chromiumos or other 3rd parties). > Also, fix some indentions on the way. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> > --- > > This of course only makes sense if someone uses it (and in the case of > chromium port it to their tree... and set up some kind of community > mailing list or something?). Therefore I would like to hear your thoughts > about it. Would you use it? > > Makefile | 3 +++ > bitbang_spi.c | 2 +- > board_enable.c | 12 ++++++------ > chipset_enable.c | 16 ++++++---------- > cli_common.c | 2 +- > dediprog.c | 10 +++++----- > flashrom.c | 50 +++++++++++++++++++++----------------------------- > jedec.c | 2 +- > opaque.c | 2 +- > pcidev.c | 10 +++++----- > physmap.c | 6 ++---- > print.c | 2 +- > programmer.c | 2 +- > sb600spi.c | 8 ++++---- > sfdp.c | 5 ++--- > spi.c | 6 +++--- > spi25.c | 6 +++--- > 17 files changed, 66 insertions(+), 78 deletions(-) > > diff --git a/Makefile b/Makefile > index 98230a5..1e85f41 100644 > --- a/Makefile > +++ b/Makefile > @@ -19,6 +19,7 @@ > # > > PROGRAM = flashrom > +SUPPORT_EMAIL = flashrom(a)flashrom.org > > > ############################################################################### > # Defaults for the toolchain. > @@ -723,6 +724,8 @@ endif > > FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "UTSNAME := yes" .features && > printf "%s" "-D'HAVE_UTSNAME=1'") > > +FEATURE_CFLAGS += -D'SUPPORT_EMAIL="$(SUPPORT_EMAIL)"' > + > # We could use PULLED_IN_LIBS, but that would be ugly. > FEATURE_LIBS += $(shell LC_ALL=C grep -q "NEEDLIBZ := yes" .libdeps && > printf "%s" "-lz") > > diff --git a/bitbang_spi.c b/bitbang_spi.c > index 0b27a67..9a0441c 100644 > --- a/bitbang_spi.c > +++ b/bitbang_spi.c > @@ -94,7 +94,7 @@ int register_spi_bitbang_master(const struct > bitbang_spi_master *master) > (master->request_bus && !master->release_bus) || > (!master->request_bus && master->release_bus)) { > msg_perr("Incomplete SPI bitbang master setting!\n" > - "Please report a bug at flashrom(a)flashrom.org > \n"); > + "Please report a bug at " SUPPORT_EMAIL "\n"); > return ERROR_FLASHROM_BUG; > } > > diff --git a/board_enable.c b/board_enable.c > index 1235bb8..6606a59 100644 > --- a/board_enable.c > +++ b/board_enable.c > @@ -335,7 +335,7 @@ void probe_superio_winbond(void) > } > msg_pinfo("Active config mode, unknown reg 0x20 > ID: %02x.\n", model); > msg_pinfo("Please send the output of \"flashrom -V > -p internal\" to \n" > - "flashrom(a)flashrom.org with W836xx: > your board name: flashrom -V\n" > + SUPPORT_EMAIL " with W836xx: your board > name: flashrom -V\n" > "as the subject to help us finish > support for your Super I/O. Thanks.\n"); > continue; > } > @@ -620,7 +620,7 @@ int it8705f_write_enable(uint8_t port) > /* The data sheet contradicts itself about max > size. */ > max_rom_decode.parallel = 1024 * 1024; > msg_pinfo("IT8705F with very unusual settings.\n" > - "Please send the output of \"flashrom -V > -p internal\" to flashrom(a)flashrom.org\n" > + "Please send the output of \"flashrom -V > -p internal\" to " SUPPORT_EMAIL "\n" > "with \"IT8705: your board name: > flashrom -V\" as the subject to help us finish\n" > "support for your Super I/O. Thanks.\n"); > ret = 1; > @@ -2479,7 +2479,7 @@ int selfcheck_board_enables(void) > const struct board_match *b = &board_matches[i]; > if (b->vendor_name == NULL || b->board_name == NULL) { > msg_gerr("ERROR: Board enable #%d does not define > a vendor and board name.\n" > - "Please report a bug at > flashrom(a)flashrom.org\n", i); > + "Please report a bug at " SUPPORT_EMAIL > "\n", i); > ret = 1; > continue; > } > @@ -2488,7 +2488,7 @@ int selfcheck_board_enables(void) > ((b->lb_vendor == NULL) ^ (b->lb_part == NULL)) || > (b->max_rom_decode_parallel == 0 && b->enable == > NULL)) { > msg_gerr("ERROR: Board enable for %s %s is > misdefined.\n" > - "Please report a bug at > flashrom(a)flashrom.org\n", > + "Please report a bug at " SUPPORT_EMAIL > "\n", > b->vendor_name, b->board_name); > ret = 1; > } > @@ -2553,7 +2553,7 @@ static const struct board_match > *board_match_name(const char *vendor, const char > if (partmatch) { > /* More than one entry has a matching name. */ > msg_perr("Board name \"%s\":\"%s\" and PCI IDs > matched more than one board enable " > - "entry. Please report a bug at > flashrom(a)flashrom.org\n", vendor, model); > + "entry. Please report a bug at " > SUPPORT_EMAIL "\n", vendor, model); > return NULL; > } > partmatch = board; > @@ -2636,7 +2636,7 @@ static int board_enable_safetycheck(const struct > board_match *board) > return 1; > } > msg_pwarn("NOTE: Running an untested board enable procedure.\n" > - "Please report success/failure to flashrom(a)flashrom.org > .\n"); > + "Please report success/failure to " SUPPORT_EMAIL ".\n"); > return 0; > } > > diff --git a/chipset_enable.c b/chipset_enable.c > index dd4e0ea..8334866 100644 > --- a/chipset_enable.c > +++ b/chipset_enable.c > @@ -1393,7 +1393,7 @@ static int enable_flash_mcp6x_7x(struct pci_dev > *dev, const char *name) > internal_buses_supported = BUS_NONE; > msg_pwarn("Flash bus type is unknown (none)\n"); > msg_pinfo("Please send the log files created by \"flashrom > -p internal -o logfile\" to \n" > - "flashrom(a)flashrom.org with \"your board name: > flashrom -V\" as the subject to\n" > + SUPPORT_EMAIL " with \"your board name: flashrom > -V\" as the subject to\n" > "help us finish support for your chipset. > Thanks.\n"); > return ERROR_NONFATAL; > } > @@ -1791,14 +1791,10 @@ int chipset_flash_enable(void) > if (!dev) > continue; > if (ret != -2) { > - msg_pwarn("Warning: unexpected second chipset > match: " > - "\"%s %s\"\n" > - "ignoring, please report lspci and board > URL " > - "to flashrom(a)flashrom.org\n" > - "with \'CHIPSET: your board name\' in > the " > - "subject line.\n", > - chipset_enables[i].vendor_name, > - chipset_enables[i].device_name); > + msg_pwarn("Warning: unexpected second chipset > match: \"%s %s\"\n" > + "ignoring, please report lspci and board > URL to " SUPPORT_EMAIL "\n" > + "with \'CHIPSET: your board name\' in > the subject line.\n", > + chipset_enables[i].vendor_name, > chipset_enables[i].device_name); > continue; > } > msg_pinfo("Found chipset \"%s %s\"", > @@ -1815,7 +1811,7 @@ int chipset_flash_enable(void) > "flashrom *and* were (not) able to " > "successfully update your firmware with > it,\n" > "then please email a report to " > - "flashrom(a)flashrom.org including a > verbose " > + SUPPORT_EMAIL " including a verbose " > "(-V) log.\nThank you!\n"); > } > msg_pinfo("Enabling flash write... "); > diff --git a/cli_common.c b/cli_common.c > index 71cc2dd..1cae546 100644 > --- a/cli_common.c > +++ b/cli_common.c > @@ -107,7 +107,7 @@ void print_chip_support_status(const struct flashchip > *chip) > } > msg_cinfo("The test status of this chip may have been > updated in the latest development\n" > "version of flashrom. If you are running the > latest development version,\n" > - "please email a report to flashrom(a)flashrom.org > if any of the above operations\n" > + "please email a report to " SUPPORT_EMAIL " if > any of the above operations\n" > "work correctly for you with this flash chip. > Please include the flashrom log\n" > "file for all operations you tested (see the man > page for details), and mention\n" > "which mainboard or programmer you tested in the > subject line.\n" > diff --git a/dediprog.c b/dediprog.c > index 71a9f8b..676248b 100644 > --- a/dediprog.c > +++ b/dediprog.c > @@ -219,8 +219,8 @@ static int dediprog_spi_bulk_read(struct flashctx > *flash, uint8_t *buf, > (chunksize >> 8) & 0xff}; > > if ((start % chunksize) || (len % chunksize)) { > - msg_perr("%s: Unaligned start=%i, len=%i! Please report a > bug " > - "at flashrom(a)flashrom.org\n", __func__, start, > len); > + msg_perr("%s: Unaligned start=%i, len=%i! Please report a > bug at " SUPPORT_EMAIL "\n", > + __func__, start, len); > return 1; > } > > @@ -326,13 +326,13 @@ static int dediprog_spi_bulk_write(struct flashctx > *flash, const uint8_t *buf, u > */ > if (chunksize != 256) { > msg_perr("%s: Chunk sizes other than 256 bytes are > unsupported, chunksize=%u!\n" > - "Please report a bug at flashrom(a)flashrom.org\n", > __func__, chunksize); > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__, chunksize); > return 1; > } > > if ((start % chunksize) || (len % chunksize)) { > - msg_perr("%s: Unaligned start=%i, len=%i! Please report a > bug " > - "at flashrom(a)flashrom.org\n", __func__, start, > len); > + msg_perr("%s: Unaligned start=%i, len=%i!\nPlease report a > bug at " SUPPORT_EMAIL "\n", > + __func__, start, len); > return 1; > } > > diff --git a/flashrom.c b/flashrom.c > index 93b292b..1148fd4 100644 > --- a/flashrom.c > +++ b/flashrom.c > @@ -558,8 +558,7 @@ char *extract_param(const char *const *haystack, const > char *needle, const char > > needlelen = strlen(needle); > if (!needlelen) { > - msg_gerr("%s: empty needle! Please report a bug at " > - "flashrom(a)flashrom.org\n", __func__); > + msg_gerr("%s: empty needle! Please report a bug at " > SUPPORT_EMAIL "\n", __func__); > return NULL; > } > /* No programmer parameters given. */ > @@ -780,8 +779,7 @@ int need_erase(const uint8_t *have, const uint8_t > *want, unsigned int len, enum > result = 0; > break; > default: > - msg_cerr("%s: Unsupported granularity! Please report a bug > at " > - "flashrom(a)flashrom.org\n", __func__); > + msg_cerr("%s: Unsupported granularity! Please report a bug > at " SUPPORT_EMAIL "\n", __func__); > } > return result; > } > @@ -842,8 +840,7 @@ static unsigned int get_next_write(const uint8_t > *have, const uint8_t *want, uns > stride = 1056; > break; > default: > - msg_cerr("%s: Unsupported granularity! Please report a bug > at " > - "flashrom(a)flashrom.org\n", __func__); > + msg_cerr("%s: Unsupported granularity! Please report a bug > at " SUPPORT_EMAIL "\n", __func__); > /* Claim that no write was needed. A write with unknown > * granularity is too dangerous to try. > */ > @@ -1119,7 +1116,7 @@ int probe_flash(struct registered_master *mst, int > startchip, struct flashctx *f > > msg_cinfo(" we need to add them manually.\n" > "You can help us by mailing us the > output of the following command to " > - "flashrom@flashrom.org:\n" > + SUPPORT_EMAIL ":\n" > "'flashrom -VV [plus the -p/--programmer > parameter]'\n" > "Thanks for your help!\n" > "===\n"); > @@ -1278,19 +1275,17 @@ static int selfcheck_eraseblocks(const struct > flashchip *chip) > /* Blocks with zero size are bugs in flashchips.c. > */ > if (eraser.eraseblocks[i].count && > !eraser.eraseblocks[i].size) { > - msg_gerr("ERROR: Flash chip %s erase > function " > - "%i region %i has size 0. Please > report" > - " a bug at flashrom(a)flashrom.org > \n", > - chip->name, k, i); > + msg_gerr("ERROR: Flash chip %s erase > function %i region %i has size 0.\n" > + "Please report a bug at " > SUPPORT_EMAIL "\n", > + chip->name, k, i); > ret = 1; > } > /* Blocks with zero count are bugs in > flashchips.c. */ > if (!eraser.eraseblocks[i].count && > eraser.eraseblocks[i].size) { > - msg_gerr("ERROR: Flash chip %s erase > function " > - "%i region %i has count 0. Please > report" > - " a bug at flashrom(a)flashrom.org > \n", > - chip->name, k, i); > + msg_gerr("ERROR: Flash chip %s erase > function %i region %i has count 0.\n" > + "Please report a bug at " > SUPPORT_EMAIL "\n", > + chip->name, k, i); > ret = 1; > } > done += eraser.eraseblocks[i].count * > @@ -1303,11 +1298,9 @@ static int selfcheck_eraseblocks(const struct > flashchip *chip) > if (!done) > continue; > if (done != chip->total_size * 1024) { > - msg_gerr("ERROR: Flash chip %s erase function %i " > - "region walking resulted in 0x%06x bytes > total," > - " expected 0x%06x bytes. Please report a > bug at" > - " flashrom(a)flashrom.org\n", chip->name, k, > - done, chip->total_size * 1024); > + msg_gerr("ERROR: Flash chip %s erase function %i > region walking resulted in " > + "0x%06x bytes total, expected 0x%06x > bytes. Please report a bug at" > + SUPPORT_EMAIL "\n", chip->name, k, done, > chip->total_size * 1024); > ret = 1; > } > if (!eraser.block_erase) > @@ -1319,10 +1312,9 @@ static int selfcheck_eraseblocks(const struct > flashchip *chip) > for (j = k + 1; j < NUM_ERASEFUNCTIONS; j++) { > if (eraser.block_erase == > chip->block_erasers[j].block_erase) { > - msg_gerr("ERROR: Flash chip %s erase > function " > - "%i and %i are identical. Please > report" > - " a bug at flashrom(a)flashrom.org > \n", > - chip->name, k, j); > + msg_gerr("ERROR: Flash chip %s erase > function %i and %i are identical.\n" > + "Please report a bug at " > SUPPORT_EMAIL "\n", > + chip->name, k, j); > ret = 1; > } > } > @@ -1518,7 +1510,7 @@ static void nonfatal_help_message(void) > if (programmer == PROGRAMMER_INTERNAL) > msg_gerr("This means we have to add special support for > your board, programmer or flash\n" > "chip. Please report this on IRC at > chat.freenode.net (channel #flashrom) or\n" > - "mail flashrom(a)flashrom.org, thanks!\n" > + "mail " SUPPORT_EMAIL ", thanks!\n" > > "-------------------------------------------------------------------------------\n" > "You may now reboot or simply leave the machine > running.\n"); > else > @@ -1526,7 +1518,7 @@ static void nonfatal_help_message(void) > msg_gerr("Please check the connections (especially those > to write protection pins) between\n" > "the programmer and the flash chip. If you think > the error is caused by flashrom\n" > "please report this on IRC at chat.freenode.net > (channel #flashrom) or\n" > - "mail flashrom(a)flashrom.org, thanks!\n"); > + "mail " SUPPORT_EMAIL ", thanks!\n"); > } > > static void emergency_help_message(void) > @@ -1535,13 +1527,13 @@ static void emergency_help_message(void) > #if CONFIG_INTERNAL == 1 > if (programmer == PROGRAMMER_INTERNAL) > msg_gerr("Get help on IRC at chat.freenode.net (channel > #flashrom) or\n" > - "mail flashrom(a)flashrom.org with the subject > \"FAILED: <your board name>\"!\n" > + "mail " SUPPORT_EMAIL " with the subject \"FAILED: > <your board name>\"!\n" > > "-------------------------------------------------------------------------------\n" > "DO NOT REBOOT OR POWEROFF!\n"); > else > #endif > msg_gerr("Please report this on IRC at chat.freenode.net > (channel #flashrom) or\n" > - "mail flashrom(a)flashrom.org, thanks!\n"); > + "mail " SUPPORT_EMAIL ", thanks!\n"); > } > > /* The way to go if you want a delimited list of programmers */ > @@ -1755,7 +1747,7 @@ int selfcheck(void) > if (chip->vendor == NULL || chip->name == NULL || > chip->bustype == BUS_NONE) { > ret = 1; > msg_gerr("ERROR: Some field of flash chip > #%d (%s) is misconfigured.\n" > - "Please report a bug at > flashrom(a)flashrom.org\n", i, > + "Please report a bug at " > SUPPORT_EMAIL "\n", i, > chip->name == NULL ? "unnamed" : > chip->name); > } > if (selfcheck_eraseblocks(chip)) { > diff --git a/jedec.c b/jedec.c > index 358b850..fa02c7b 100644 > --- a/jedec.c > +++ b/jedec.c > @@ -669,7 +669,7 @@ static int changelock_regspace2_block(const struct > flashctx *flash, chipaddr off > > if (new_bits & ~REG2_MASK) { > msg_cerr("Invalid locking change 0x%02x requested at > 0x%0*" PRIxPTR "! " > - "Please report a bug at flashrom(a)flashrom.org\n", > + "Please report a bug at " SUPPORT_EMAIL "\n", > new_bits, PRIxPTR_WIDTH, offset); > return -1; > } > diff --git a/opaque.c b/opaque.c > index a5a829c..5bf6737 100644 > --- a/opaque.c > +++ b/opaque.c > @@ -56,7 +56,7 @@ int register_opaque_master(const struct opaque_master > *mst) > > if (!mst->probe || !mst->read || !mst->write || !mst->erase) { > msg_perr("%s called with incomplete master definition. " > - "Please report a bug at flashrom(a)flashrom.org\n", > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__); > return ERROR_FLASHROM_BUG; > } > diff --git a/pcidev.c b/pcidev.c > index 2c78063..6023438 100644 > --- a/pcidev.c > +++ b/pcidev.c > @@ -146,7 +146,7 @@ uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) > addr &= PCI_ROM_ADDRESS_MASK; > break; > case TYPE_UNKNOWN: > - msg_perr("BAR type unknown, please report a bug at > flashrom(a)flashrom.org\n"); > + msg_perr("BAR type unknown, please report a bug at " > SUPPORT_EMAIL "\n"); > } > > return (uintptr_t)addr; > @@ -156,7 +156,7 @@ static int pcidev_shutdown(void *data) > { > if (pacc == NULL) { > msg_perr("%s: Tried to cleanup an invalid PCI context!\n" > - "Please report a bug at flashrom(a)flashrom.org\n", > __func__); > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__); > return 1; > } > pci_cleanup(pacc); > @@ -167,7 +167,7 @@ int pci_init_common(void) > { > if (pacc != NULL) { > msg_perr("%s: Tried to allocate a new PCI context, but > there is still an old one!\n" > - "Please report a bug at flashrom(a)flashrom.org\n", > __func__); > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__); > return 1; > } > pacc = pci_alloc(); /* Get the pci_access structure */ > @@ -225,7 +225,7 @@ struct pci_dev *pcidev_init(const struct dev_entry > *devs, int bar) > if (devs[i].status == NT) > msg_pinfo("===\nThis PCI device is > UNTESTED. Please report the 'flashrom -p " > "xxxx' output \n" > - "to flashrom(a)flashrom.org if it > works for you. Please add the name " > + "to " SUPPORT_EMAIL " if it > works for you. Please add the name " > "of your\n" > "PCI device to the subject. > Thank you for your help!\n===\n"); > > @@ -274,7 +274,7 @@ int undo_pci_write(void *p) > struct undo_pci_write_data *data = p; > if (pacc == NULL) { > msg_perr("%s: Tried to undo PCI writes without a valid PCI > context!\n" > - "Please report a bug at flashrom(a)flashrom.org\n", > __func__); > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__); > return 1; > } > msg_pdbg("Restoring PCI config space for %02x:%02x:%01x reg > 0x%02x\n", > diff --git a/physmap.c b/physmap.c > index ca5afd0..6fb5e3b 100644 > --- a/physmap.c > +++ b/physmap.c > @@ -308,8 +308,7 @@ void physunmap_unaligned(void *virt_addr, size_t len) > { > /* No need to check for zero size, such mappings would have > yielded ERROR_PTR. */ > if (virt_addr == ERROR_PTR) { > - msg_perr("Trying to unmap a nonexisting mapping!\n" > - "Please report a bug at flashrom(a)flashrom.org > \n"); > + msg_perr("Trying to unmap a nonexisting mapping!\nPlease > report a bug at " SUPPORT_EMAIL "\n"); > return; > } > > @@ -322,8 +321,7 @@ void physunmap(void *virt_addr, size_t len) > > /* No need to check for zero size, such mappings would have > yielded ERROR_PTR. */ > if (virt_addr == ERROR_PTR) { > - msg_perr("Trying to unmap a nonexisting mapping!\n" > - "Please report a bug at flashrom(a)flashrom.org > \n"); > + msg_perr("Trying to unmap a nonexisting mapping!\nPlease > report a bug at " SUPPORT_EMAIL "\n"); > return; > } > tmp = (uintptr_t)virt_addr; > diff --git a/print.c b/print.c > index 243aa49..de9f85f 100644 > --- a/print.c > +++ b/print.c > @@ -522,7 +522,7 @@ int print_supported(void) > break; > default: > msg_gerr("\n%s: %s: Uninitialized programmer type! > Please report a bug at " > - "flashrom(a)flashrom.org\n", __func__, > prog.name); > + SUPPORT_EMAIL "\n", __func__, prog.name); > break; > } > } > diff --git a/programmer.c b/programmer.c > index fd634b2..c88e9b5 100644 > --- a/programmer.c > +++ b/programmer.c > @@ -103,7 +103,7 @@ int register_par_master(const struct par_master *mst, > !mst->chip_writen || !mst->chip_readb || !mst->chip_readw || > !mst->chip_readl || !mst->chip_readn) { > msg_perr("%s called with incomplete master definition. " > - "Please report a bug at flashrom(a)flashrom.org\n", > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__); > return ERROR_FLASHROM_BUG; > } > diff --git a/sb600spi.c b/sb600spi.c > index 69fad65..381254e 100644 > --- a/sb600spi.c > +++ b/sb600spi.c > @@ -106,8 +106,8 @@ static void determine_generation(struct pci_dev *dev) > msg_pdbg("SB8xx/SB9xx/Hudson-1 detected.\n"); > } else { > msg_pwarn("SB device found but SMBus revision > 0x%02x does not match known values.\n" > - "Assuming SB8xx/SB9xx/Hudson-1. Please > send a log to flashrom(a)flashrom.org\n", > - rev); > + "Assuming SB8xx/SB9xx/Hudson-1. Please > send a log to " SUPPORT_EMAIL "\n", > + rev); > amd_gen = CHIPSET_SB89XX; > } > } else if (dev->device_id == 0x780e) { > @@ -146,13 +146,13 @@ static void determine_generation(struct pci_dev *dev) > msg_pdbg("Yangtze detected.\n"); > } else { > msg_pwarn("FCH device found but SMBus revision > 0x%02x does not match known values.\n" > - "Please report this to > flashrom(a)flashrom.org and include this log and\n" > + "Please report this to " SUPPORT_EMAIL " > and include this log and\n" > "the output of lspci -nnvx, thanks!.\n", > rev); > } > #endif > } else > msg_pwarn("%s: Unknown LPC device %" PRIx16 ":%" PRIx16 > ".\n" > - "Please report this to flashrom(a)flashrom.org > and include this log and\n" > + "Please report this to " SUPPORT_EMAIL " and > include this log and\n" > "the output of lspci -nnvx, thanks!\n", > __func__, dev->vendor_id, dev->device_id); > } > diff --git a/sfdp.c b/sfdp.c > index bc69dd0..ed22392 100644 > --- a/sfdp.c > +++ b/sfdp.c > @@ -89,8 +89,7 @@ static int sfdp_add_uniform_eraser(struct flashchip > *chip, uint8_t opcode, uint3 > > if (erasefn == NULL || total_size == 0 || block_size == 0 || > total_size % block_size != 0) { > - msg_cdbg("%s: invalid input, please report to " > - "flashrom(a)flashrom.org\n", __func__); > + msg_cdbg("%s: invalid input, please report to " > SUPPORT_EMAIL "\n", __func__); > return 1; > } > > @@ -120,7 +119,7 @@ static int sfdp_add_uniform_eraser(struct flashchip > *chip, uint8_t opcode, uint3 > return 0; > } > msg_cinfo("%s: Not enough space to store another eraser (i=%d)." > - " Please report this at flashrom(a)flashrom.org\n", > + " Please report this at " SUPPORT_EMAIL "\n", > __func__, i); > return 1; > } > diff --git a/spi.c b/spi.c > index 894f73f..102e9b5 100644 > --- a/spi.c > +++ b/spi.c > @@ -82,7 +82,7 @@ int default_spi_read(struct flashctx *flash, uint8_t > *buf, unsigned int start, > if (max_data == MAX_DATA_UNSPECIFIED) { > msg_perr("%s called, but SPI read chunk size not defined " > "on this hardware. Please report a bug at " > - "flashrom(a)flashrom.org\n", __func__); > + SUPPORT_EMAIL "\n", __func__); > return 1; > } > return spi_read_chunked(flash, buf, start, len, max_data); > @@ -94,7 +94,7 @@ int default_spi_write_256(struct flashctx *flash, const > uint8_t *buf, unsigned i > if (max_data == MAX_DATA_UNSPECIFIED) { > msg_perr("%s called, but SPI write chunk size not defined " > "on this hardware. Please report a bug at " > - "flashrom(a)flashrom.org\n", __func__); > + "" SUPPORT_EMAIL "\n", __func__); > return 1; > } > return spi_write_chunked(flash, buf, start, len, max_data); > @@ -174,7 +174,7 @@ int register_spi_master(const struct spi_master *mst) > ((mst->command == default_spi_send_command) && > (mst->multicommand == default_spi_send_multicommand))) { > msg_perr("%s called with incomplete master definition. " > - "Please report a bug at flashrom(a)flashrom.org\n", > + "Please report a bug at " SUPPORT_EMAIL "\n", > __func__); > return ERROR_FLASHROM_BUG; > } > diff --git a/spi25.c b/spi25.c > index 673bdf5..5cb9632 100644 > --- a/spi25.c > +++ b/spi25.c > @@ -835,7 +835,7 @@ erasefunc_t *spi_get_erasefn_from_opcode(uint8_t > opcode) > return &spi_block_erase_db; > default: > msg_cinfo("%s: unknown erase opcode (0x%02x). Please > report " > - "this at flashrom(a)flashrom.org\n", __func__, > opcode); > + "this at " SUPPORT_EMAIL "\n", __func__, opcode); > return NULL; > } > } > @@ -1101,7 +1101,7 @@ int default_spi_write_aai(struct flashctx *flash, > const uint8_t *buf, unsigned i > /* The data sheet requires a start address with the low bit > cleared. */ > if (start % 2) { > msg_cerr("%s: start address not even! Please report a bug > at " > - "flashrom(a)flashrom.org\n", __func__); > + "" SUPPORT_EMAIL "\n", __func__); > if (spi_chip_write_1(flash, buf, start, start % 2)) > return SPI_GENERIC_ERROR; > pos += start % 2; > @@ -1119,7 +1119,7 @@ int default_spi_write_aai(struct flashctx *flash, > const uint8_t *buf, unsigned i > /* The data sheet requires total AAI write length to be even. */ > if (len % 2) { > msg_cerr("%s: total write length not even! Please report a > " > - "bug at flashrom(a)flashrom.org\n", __func__); > + "bug at " SUPPORT_EMAIL "\n", __func__); > /* Do not return an error for now. */ > //return SPI_GENERIC_ERROR; > } > -- > Kind regards, Stefan Tauner > > -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

FAILED: peppy
by Gerard Looije 21 Aug '14

21 Aug '14

*** Already downloaded! *** *** Backing up existing ROM to current directory *** flashrom v0.9.4 : 14ce0cf : Oct 09 2013 22:16:28 UTC on Linux 3.16.1-1-ARCH (x86_64), built with libpci 3.1.10, GCC 4.7.x-google 20130114 (prerelease), little endian w25q_disable_writeprotect(): error=1. FAILED *** Downloading latest available custom ROM for Peppy *** *** Already downloaded! *** --2014-08-19 17:42:40-- https://johnlewis.ie/Chromebook-ROMs/md5sums.txt Resolving johnlewis.ie (johnlewis.ie)... 37.187.3.40 Connecting to johnlewis.ie (johnlewis.ie)|37.187.3.40|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 4941 (4.8K) [text/plain] Saving to: ‘md5sums.txt’ 100%[==============================================================================================================================>] 4,941 --.-K/s in 0s 2014-08-19 17:42:41 (479 MB/s) - ‘md5sums.txt’ saved [4941/4941] About to flash new ROM, repeat 'If this bricks my Chromebook/box, on my head be it!' observing exact case and punctuation: If this bricks my Chromebook/box, on my head be it! dd: failed to open ‘backup-190814.rom’: No such file or directory flashrom v0.9.4 : 14ce0cf : Oct 09 2013 22:16:28 UTC on Linux 3.16.1-1-ARCH (x86_64), built with libpci 3.1.10, GCC 4.7.x-google 20130114 (prerelease), little endian Block protection could not be disabled! Erasing and writing flash chip... spi_block_erase_20 failed during command execution at address 0x0 ERASE FAILED at 0x00600000! Expected=0xff, Read=0x5f, failed byte count from 0x00600000-0x00600fff: 0x148 ERASE FAILED! Reading current flash chip contents... spi_block_erase_52 failed during command execution at address 0x0 ERASE FAILED! Reading current flash chip contents... spi_block_erase_d8 failed during command execution at address 0x0 ERASE FAILED at 0x00600000! Expected=0xff, Read=0x5f, failed byte count from 0x00600000-0x0060ffff: 0x148 ERASE FAILED! Reading current flash chip contents... spi_chip_erase_60 failed during command execution ERASE FAILED! Reading current flash chip contents... spi_chip_erase_c7 failed during command execution ERASE FAILED! FAILED! Uh oh. Erase/write failed. Checking if anything changed. Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! FAILED *** Assuming you didn't get any errors beyond the ubiquitous 'spi_block_erase_20 failed during command execution at address 0×0 Verifying flash… VERIFY FAILED at 0×00000062! Expected=0xff, Read=0x0b, failed byte count from 0×00000000-0x007fffff: 0×4' you may reboot. Otherwise, do not reboot under ANY circumstances, and seek help! ***

3 4

[patch] exit when the same filename is used for reading/writing flash chip content and to store log output
by Idwer Vollering 21 Aug '14

21 Aug '14

Tested on physical hardware, built on FreeBSD (less portability 'headaches'). Signed-off-By: Idwer Vollering <vidwer(a)gmail.com> Index: cli_output.c =================================================================== --- cli_output.c (revision 1846) +++ cli_output.c (working copy) @@ -52,8 +52,12 @@ msg_gerr("No logfile name specified.\n"); return 1; } - if ((logfile = fopen(filename, "w")) == NULL) { + if ((logfile = fopen(filename, "xw")) == NULL) { msg_gerr("Error: opening log file \"%s\" failed: %s\n", filename, strerror(errno)); + msg_gdbg("This means that flashrom can't write log output\n" \ + "to the file you specified (\"%s\"),\n" \ + "or you are using the same filename to read from/write to (-r / -w)\n" \ + "and write the log output to (-o).\n", filename); return 1; } return 0;

1 0

[PATCH] Add SUPPORT_EMAIL compiler flag.
by Stefan Tauner 21 Aug '14

21 Aug '14

Use it throughout the source to allow for printing alternative support email addresses (e.g. for distributions, chromiumos or other 3rd parties). Also, fix some indentions on the way. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- This of course only makes sense if someone uses it (and in the case of chromium port it to their tree... and set up some kind of community mailing list or something?). Therefore I would like to hear your thoughts about it. Would you use it? Makefile | 3 +++ bitbang_spi.c | 2 +- board_enable.c | 12 ++++++------ chipset_enable.c | 16 ++++++---------- cli_common.c | 2 +- dediprog.c | 10 +++++----- flashrom.c | 50 +++++++++++++++++++++----------------------------- jedec.c | 2 +- opaque.c | 2 +- pcidev.c | 10 +++++----- physmap.c | 6 ++---- print.c | 2 +- programmer.c | 2 +- sb600spi.c | 8 ++++---- sfdp.c | 5 ++--- spi.c | 6 +++--- spi25.c | 6 +++--- 17 files changed, 66 insertions(+), 78 deletions(-) diff --git a/Makefile b/Makefile index 98230a5..1e85f41 100644 --- a/Makefile +++ b/Makefile @@ -19,6 +19,7 @@ # PROGRAM = flashrom +SUPPORT_EMAIL = flashrom(a)flashrom.org ############################################################################### # Defaults for the toolchain. @@ -723,6 +724,8 @@ endif FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'") +FEATURE_CFLAGS += -D'SUPPORT_EMAIL="$(SUPPORT_EMAIL)"' + # We could use PULLED_IN_LIBS, but that would be ugly. FEATURE_LIBS += $(shell LC_ALL=C grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz") diff --git a/bitbang_spi.c b/bitbang_spi.c index 0b27a67..9a0441c 100644 --- a/bitbang_spi.c +++ b/bitbang_spi.c @@ -94,7 +94,7 @@ int register_spi_bitbang_master(const struct bitbang_spi_master *master) (master->request_bus && !master->release_bus) || (!master->request_bus && master->release_bus)) { msg_perr("Incomplete SPI bitbang master setting!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); + "Please report a bug at " SUPPORT_EMAIL "\n"); return ERROR_FLASHROM_BUG; } diff --git a/board_enable.c b/board_enable.c index 1235bb8..6606a59 100644 --- a/board_enable.c +++ b/board_enable.c @@ -335,7 +335,7 @@ void probe_superio_winbond(void) } msg_pinfo("Active config mode, unknown reg 0x20 ID: %02x.\n", model); msg_pinfo("Please send the output of \"flashrom -V -p internal\" to \n" - "flashrom(a)flashrom.org with W836xx: your board name: flashrom -V\n" + SUPPORT_EMAIL " with W836xx: your board name: flashrom -V\n" "as the subject to help us finish support for your Super I/O. Thanks.\n"); continue; } @@ -620,7 +620,7 @@ int it8705f_write_enable(uint8_t port) /* The data sheet contradicts itself about max size. */ max_rom_decode.parallel = 1024 * 1024; msg_pinfo("IT8705F with very unusual settings.\n" - "Please send the output of \"flashrom -V -p internal\" to flashrom(a)flashrom.org\n" + "Please send the output of \"flashrom -V -p internal\" to " SUPPORT_EMAIL "\n" "with \"IT8705: your board name: flashrom -V\" as the subject to help us finish\n" "support for your Super I/O. Thanks.\n"); ret = 1; @@ -2479,7 +2479,7 @@ int selfcheck_board_enables(void) const struct board_match *b = &board_matches[i]; if (b->vendor_name == NULL || b->board_name == NULL) { msg_gerr("ERROR: Board enable #%d does not define a vendor and board name.\n" - "Please report a bug at flashrom(a)flashrom.org\n", i); + "Please report a bug at " SUPPORT_EMAIL "\n", i); ret = 1; continue; } @@ -2488,7 +2488,7 @@ int selfcheck_board_enables(void) ((b->lb_vendor == NULL) ^ (b->lb_part == NULL)) || (b->max_rom_decode_parallel == 0 && b->enable == NULL)) { msg_gerr("ERROR: Board enable for %s %s is misdefined.\n" - "Please report a bug at flashrom(a)flashrom.org\n", + "Please report a bug at " SUPPORT_EMAIL "\n", b->vendor_name, b->board_name); ret = 1; } @@ -2553,7 +2553,7 @@ static const struct board_match *board_match_name(const char *vendor, const char if (partmatch) { /* More than one entry has a matching name. */ msg_perr("Board name \"%s\":\"%s\" and PCI IDs matched more than one board enable " - "entry. Please report a bug at flashrom(a)flashrom.org\n", vendor, model); + "entry. Please report a bug at " SUPPORT_EMAIL "\n", vendor, model); return NULL; } partmatch = board; @@ -2636,7 +2636,7 @@ static int board_enable_safetycheck(const struct board_match *board) return 1; } msg_pwarn("NOTE: Running an untested board enable procedure.\n" - "Please report success/failure to flashrom(a)flashrom.org.\n"); + "Please report success/failure to " SUPPORT_EMAIL ".\n"); return 0; } diff --git a/chipset_enable.c b/chipset_enable.c index dd4e0ea..8334866 100644 --- a/chipset_enable.c +++ b/chipset_enable.c @@ -1393,7 +1393,7 @@ static int enable_flash_mcp6x_7x(struct pci_dev *dev, const char *name) internal_buses_supported = BUS_NONE; msg_pwarn("Flash bus type is unknown (none)\n"); msg_pinfo("Please send the log files created by \"flashrom -p internal -o logfile\" to \n" - "flashrom(a)flashrom.org with \"your board name: flashrom -V\" as the subject to\n" + SUPPORT_EMAIL " with \"your board name: flashrom -V\" as the subject to\n" "help us finish support for your chipset. Thanks.\n"); return ERROR_NONFATAL; } @@ -1791,14 +1791,10 @@ int chipset_flash_enable(void) if (!dev) continue; if (ret != -2) { - msg_pwarn("Warning: unexpected second chipset match: " - "\"%s %s\"\n" - "ignoring, please report lspci and board URL " - "to flashrom(a)flashrom.org\n" - "with \'CHIPSET: your board name\' in the " - "subject line.\n", - chipset_enables[i].vendor_name, - chipset_enables[i].device_name); + msg_pwarn("Warning: unexpected second chipset match: \"%s %s\"\n" + "ignoring, please report lspci and board URL to " SUPPORT_EMAIL "\n" + "with \'CHIPSET: your board name\' in the subject line.\n", + chipset_enables[i].vendor_name, chipset_enables[i].device_name); continue; } msg_pinfo("Found chipset \"%s %s\"", @@ -1815,7 +1811,7 @@ int chipset_flash_enable(void) "flashrom *and* were (not) able to " "successfully update your firmware with it,\n" "then please email a report to " - "flashrom(a)flashrom.org including a verbose " + SUPPORT_EMAIL " including a verbose " "(-V) log.\nThank you!\n"); } msg_pinfo("Enabling flash write... "); diff --git a/cli_common.c b/cli_common.c index 71cc2dd..1cae546 100644 --- a/cli_common.c +++ b/cli_common.c @@ -107,7 +107,7 @@ void print_chip_support_status(const struct flashchip *chip) } msg_cinfo("The test status of this chip may have been updated in the latest development\n" "version of flashrom. If you are running the latest development version,\n" - "please email a report to flashrom(a)flashrom.org if any of the above operations\n" + "please email a report to " SUPPORT_EMAIL " if any of the above operations\n" "work correctly for you with this flash chip. Please include the flashrom log\n" "file for all operations you tested (see the man page for details), and mention\n" "which mainboard or programmer you tested in the subject line.\n" diff --git a/dediprog.c b/dediprog.c index 71a9f8b..676248b 100644 --- a/dediprog.c +++ b/dediprog.c @@ -219,8 +219,8 @@ static int dediprog_spi_bulk_read(struct flashctx *flash, uint8_t *buf, (chunksize >> 8) & 0xff}; if ((start % chunksize) || (len % chunksize)) { - msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " - "at flashrom(a)flashrom.org\n", __func__, start, len); + msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug at " SUPPORT_EMAIL "\n", + __func__, start, len); return 1; } @@ -326,13 +326,13 @@ static int dediprog_spi_bulk_write(struct flashctx *flash, const uint8_t *buf, u */ if (chunksize != 256) { msg_perr("%s: Chunk sizes other than 256 bytes are unsupported, chunksize=%u!\n" - "Please report a bug at flashrom(a)flashrom.org\n", __func__, chunksize); + "Please report a bug at " SUPPORT_EMAIL "\n", __func__, chunksize); return 1; } if ((start % chunksize) || (len % chunksize)) { - msg_perr("%s: Unaligned start=%i, len=%i! Please report a bug " - "at flashrom(a)flashrom.org\n", __func__, start, len); + msg_perr("%s: Unaligned start=%i, len=%i!\nPlease report a bug at " SUPPORT_EMAIL "\n", + __func__, start, len); return 1; } diff --git a/flashrom.c b/flashrom.c index 93b292b..1148fd4 100644 --- a/flashrom.c +++ b/flashrom.c @@ -558,8 +558,7 @@ char *extract_param(const char *const *haystack, const char *needle, const char needlelen = strlen(needle); if (!needlelen) { - msg_gerr("%s: empty needle! Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); + msg_gerr("%s: empty needle! Please report a bug at " SUPPORT_EMAIL "\n", __func__); return NULL; } /* No programmer parameters given. */ @@ -780,8 +779,7 @@ int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum result = 0; break; default: - msg_cerr("%s: Unsupported granularity! Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); + msg_cerr("%s: Unsupported granularity! Please report a bug at " SUPPORT_EMAIL "\n", __func__); } return result; } @@ -842,8 +840,7 @@ static unsigned int get_next_write(const uint8_t *have, const uint8_t *want, uns stride = 1056; break; default: - msg_cerr("%s: Unsupported granularity! Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); + msg_cerr("%s: Unsupported granularity! Please report a bug at " SUPPORT_EMAIL "\n", __func__); /* Claim that no write was needed. A write with unknown * granularity is too dangerous to try. */ @@ -1119,7 +1116,7 @@ int probe_flash(struct registered_master *mst, int startchip, struct flashctx *f msg_cinfo(" we need to add them manually.\n" "You can help us by mailing us the output of the following command to " - "flashrom@flashrom.org:\n" + SUPPORT_EMAIL ":\n" "'flashrom -VV [plus the -p/--programmer parameter]'\n" "Thanks for your help!\n" "===\n"); @@ -1278,19 +1275,17 @@ static int selfcheck_eraseblocks(const struct flashchip *chip) /* Blocks with zero size are bugs in flashchips.c. */ if (eraser.eraseblocks[i].count && !eraser.eraseblocks[i].size) { - msg_gerr("ERROR: Flash chip %s erase function " - "%i region %i has size 0. Please report" - " a bug at flashrom(a)flashrom.org\n", - chip->name, k, i); + msg_gerr("ERROR: Flash chip %s erase function %i region %i has size 0.\n" + "Please report a bug at " SUPPORT_EMAIL "\n", + chip->name, k, i); ret = 1; } /* Blocks with zero count are bugs in flashchips.c. */ if (!eraser.eraseblocks[i].count && eraser.eraseblocks[i].size) { - msg_gerr("ERROR: Flash chip %s erase function " - "%i region %i has count 0. Please report" - " a bug at flashrom(a)flashrom.org\n", - chip->name, k, i); + msg_gerr("ERROR: Flash chip %s erase function %i region %i has count 0.\n" + "Please report a bug at " SUPPORT_EMAIL "\n", + chip->name, k, i); ret = 1; } done += eraser.eraseblocks[i].count * @@ -1303,11 +1298,9 @@ static int selfcheck_eraseblocks(const struct flashchip *chip) if (!done) continue; if (done != chip->total_size * 1024) { - msg_gerr("ERROR: Flash chip %s erase function %i " - "region walking resulted in 0x%06x bytes total," - " expected 0x%06x bytes. Please report a bug at" - " flashrom(a)flashrom.org\n", chip->name, k, - done, chip->total_size * 1024); + msg_gerr("ERROR: Flash chip %s erase function %i region walking resulted in " + "0x%06x bytes total, expected 0x%06x bytes. Please report a bug at" + SUPPORT_EMAIL "\n", chip->name, k, done, chip->total_size * 1024); ret = 1; } if (!eraser.block_erase) @@ -1319,10 +1312,9 @@ static int selfcheck_eraseblocks(const struct flashchip *chip) for (j = k + 1; j < NUM_ERASEFUNCTIONS; j++) { if (eraser.block_erase == chip->block_erasers[j].block_erase) { - msg_gerr("ERROR: Flash chip %s erase function " - "%i and %i are identical. Please report" - " a bug at flashrom(a)flashrom.org\n", - chip->name, k, j); + msg_gerr("ERROR: Flash chip %s erase function %i and %i are identical.\n" + "Please report a bug at " SUPPORT_EMAIL "\n", + chip->name, k, j); ret = 1; } } @@ -1518,7 +1510,7 @@ static void nonfatal_help_message(void) if (programmer == PROGRAMMER_INTERNAL) msg_gerr("This means we have to add special support for your board, programmer or flash\n" "chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or\n" - "mail flashrom(a)flashrom.org, thanks!\n" + "mail " SUPPORT_EMAIL ", thanks!\n" "-------------------------------------------------------------------------------\n" "You may now reboot or simply leave the machine running.\n"); else @@ -1526,7 +1518,7 @@ static void nonfatal_help_message(void) msg_gerr("Please check the connections (especially those to write protection pins) between\n" "the programmer and the flash chip. If you think the error is caused by flashrom\n" "please report this on IRC at chat.freenode.net (channel #flashrom) or\n" - "mail flashrom(a)flashrom.org, thanks!\n"); + "mail " SUPPORT_EMAIL ", thanks!\n"); } static void emergency_help_message(void) @@ -1535,13 +1527,13 @@ static void emergency_help_message(void) #if CONFIG_INTERNAL == 1 if (programmer == PROGRAMMER_INTERNAL) msg_gerr("Get help on IRC at chat.freenode.net (channel #flashrom) or\n" - "mail flashrom(a)flashrom.org with the subject \"FAILED: <your board name>\"!\n" + "mail " SUPPORT_EMAIL " with the subject \"FAILED: <your board name>\"!\n" "-------------------------------------------------------------------------------\n" "DO NOT REBOOT OR POWEROFF!\n"); else #endif msg_gerr("Please report this on IRC at chat.freenode.net (channel #flashrom) or\n" - "mail flashrom(a)flashrom.org, thanks!\n"); + "mail " SUPPORT_EMAIL ", thanks!\n"); } /* The way to go if you want a delimited list of programmers */ @@ -1755,7 +1747,7 @@ int selfcheck(void) if (chip->vendor == NULL || chip->name == NULL || chip->bustype == BUS_NONE) { ret = 1; msg_gerr("ERROR: Some field of flash chip #%d (%s) is misconfigured.\n" - "Please report a bug at flashrom(a)flashrom.org\n", i, + "Please report a bug at " SUPPORT_EMAIL "\n", i, chip->name == NULL ? "unnamed" : chip->name); } if (selfcheck_eraseblocks(chip)) { diff --git a/jedec.c b/jedec.c index 358b850..fa02c7b 100644 --- a/jedec.c +++ b/jedec.c @@ -669,7 +669,7 @@ static int changelock_regspace2_block(const struct flashctx *flash, chipaddr off if (new_bits & ~REG2_MASK) { msg_cerr("Invalid locking change 0x%02x requested at 0x%0*" PRIxPTR "! " - "Please report a bug at flashrom(a)flashrom.org\n", + "Please report a bug at " SUPPORT_EMAIL "\n", new_bits, PRIxPTR_WIDTH, offset); return -1; } diff --git a/opaque.c b/opaque.c index a5a829c..5bf6737 100644 --- a/opaque.c +++ b/opaque.c @@ -56,7 +56,7 @@ int register_opaque_master(const struct opaque_master *mst) if (!mst->probe || !mst->read || !mst->write || !mst->erase) { msg_perr("%s called with incomplete master definition. " - "Please report a bug at flashrom(a)flashrom.org\n", + "Please report a bug at " SUPPORT_EMAIL "\n", __func__); return ERROR_FLASHROM_BUG; } diff --git a/pcidev.c b/pcidev.c index 2c78063..6023438 100644 --- a/pcidev.c +++ b/pcidev.c @@ -146,7 +146,7 @@ uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) addr &= PCI_ROM_ADDRESS_MASK; break; case TYPE_UNKNOWN: - msg_perr("BAR type unknown, please report a bug at flashrom(a)flashrom.org\n"); + msg_perr("BAR type unknown, please report a bug at " SUPPORT_EMAIL "\n"); } return (uintptr_t)addr; @@ -156,7 +156,7 @@ static int pcidev_shutdown(void *data) { if (pacc == NULL) { msg_perr("%s: Tried to cleanup an invalid PCI context!\n" - "Please report a bug at flashrom(a)flashrom.org\n", __func__); + "Please report a bug at " SUPPORT_EMAIL "\n", __func__); return 1; } pci_cleanup(pacc); @@ -167,7 +167,7 @@ int pci_init_common(void) { if (pacc != NULL) { msg_perr("%s: Tried to allocate a new PCI context, but there is still an old one!\n" - "Please report a bug at flashrom(a)flashrom.org\n", __func__); + "Please report a bug at " SUPPORT_EMAIL "\n", __func__); return 1; } pacc = pci_alloc(); /* Get the pci_access structure */ @@ -225,7 +225,7 @@ struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar) if (devs[i].status == NT) msg_pinfo("===\nThis PCI device is UNTESTED. Please report the 'flashrom -p " "xxxx' output \n" - "to flashrom(a)flashrom.org if it works for you. Please add the name " + "to " SUPPORT_EMAIL " if it works for you. Please add the name " "of your\n" "PCI device to the subject. Thank you for your help!\n===\n"); @@ -274,7 +274,7 @@ int undo_pci_write(void *p) struct undo_pci_write_data *data = p; if (pacc == NULL) { msg_perr("%s: Tried to undo PCI writes without a valid PCI context!\n" - "Please report a bug at flashrom(a)flashrom.org\n", __func__); + "Please report a bug at " SUPPORT_EMAIL "\n", __func__); return 1; } msg_pdbg("Restoring PCI config space for %02x:%02x:%01x reg 0x%02x\n", diff --git a/physmap.c b/physmap.c index ca5afd0..6fb5e3b 100644 --- a/physmap.c +++ b/physmap.c @@ -308,8 +308,7 @@ void physunmap_unaligned(void *virt_addr, size_t len) { /* No need to check for zero size, such mappings would have yielded ERROR_PTR. */ if (virt_addr == ERROR_PTR) { - msg_perr("Trying to unmap a nonexisting mapping!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); + msg_perr("Trying to unmap a nonexisting mapping!\nPlease report a bug at " SUPPORT_EMAIL "\n"); return; } @@ -322,8 +321,7 @@ void physunmap(void *virt_addr, size_t len) /* No need to check for zero size, such mappings would have yielded ERROR_PTR. */ if (virt_addr == ERROR_PTR) { - msg_perr("Trying to unmap a nonexisting mapping!\n" - "Please report a bug at flashrom(a)flashrom.org\n"); + msg_perr("Trying to unmap a nonexisting mapping!\nPlease report a bug at " SUPPORT_EMAIL "\n"); return; } tmp = (uintptr_t)virt_addr; diff --git a/print.c b/print.c index 243aa49..de9f85f 100644 --- a/print.c +++ b/print.c @@ -522,7 +522,7 @@ int print_supported(void) break; default: msg_gerr("\n%s: %s: Uninitialized programmer type! Please report a bug at " - "flashrom(a)flashrom.org\n", __func__, prog.name); + SUPPORT_EMAIL "\n", __func__, prog.name); break; } } diff --git a/programmer.c b/programmer.c index fd634b2..c88e9b5 100644 --- a/programmer.c +++ b/programmer.c @@ -103,7 +103,7 @@ int register_par_master(const struct par_master *mst, !mst->chip_writen || !mst->chip_readb || !mst->chip_readw || !mst->chip_readl || !mst->chip_readn) { msg_perr("%s called with incomplete master definition. " - "Please report a bug at flashrom(a)flashrom.org\n", + "Please report a bug at " SUPPORT_EMAIL "\n", __func__); return ERROR_FLASHROM_BUG; } diff --git a/sb600spi.c b/sb600spi.c index 69fad65..381254e 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -106,8 +106,8 @@ static void determine_generation(struct pci_dev *dev) msg_pdbg("SB8xx/SB9xx/Hudson-1 detected.\n"); } else { msg_pwarn("SB device found but SMBus revision 0x%02x does not match known values.\n" - "Assuming SB8xx/SB9xx/Hudson-1. Please send a log to flashrom(a)flashrom.org\n", - rev); + "Assuming SB8xx/SB9xx/Hudson-1. Please send a log to " SUPPORT_EMAIL "\n", + rev); amd_gen = CHIPSET_SB89XX; } } else if (dev->device_id == 0x780e) { @@ -146,13 +146,13 @@ static void determine_generation(struct pci_dev *dev) msg_pdbg("Yangtze detected.\n"); } else { msg_pwarn("FCH device found but SMBus revision 0x%02x does not match known values.\n" - "Please report this to flashrom(a)flashrom.org and include this log and\n" + "Please report this to " SUPPORT_EMAIL " and include this log and\n" "the output of lspci -nnvx, thanks!.\n", rev); } #endif } else msg_pwarn("%s: Unknown LPC device %" PRIx16 ":%" PRIx16 ".\n" - "Please report this to flashrom(a)flashrom.org and include this log and\n" + "Please report this to " SUPPORT_EMAIL " and include this log and\n" "the output of lspci -nnvx, thanks!\n", __func__, dev->vendor_id, dev->device_id); } diff --git a/sfdp.c b/sfdp.c index bc69dd0..ed22392 100644 --- a/sfdp.c +++ b/sfdp.c @@ -89,8 +89,7 @@ static int sfdp_add_uniform_eraser(struct flashchip *chip, uint8_t opcode, uint3 if (erasefn == NULL || total_size == 0 || block_size == 0 || total_size % block_size != 0) { - msg_cdbg("%s: invalid input, please report to " - "flashrom(a)flashrom.org\n", __func__); + msg_cdbg("%s: invalid input, please report to " SUPPORT_EMAIL "\n", __func__); return 1; } @@ -120,7 +119,7 @@ static int sfdp_add_uniform_eraser(struct flashchip *chip, uint8_t opcode, uint3 return 0; } msg_cinfo("%s: Not enough space to store another eraser (i=%d)." - " Please report this at flashrom(a)flashrom.org\n", + " Please report this at " SUPPORT_EMAIL "\n", __func__, i); return 1; } diff --git a/spi.c b/spi.c index 894f73f..102e9b5 100644 --- a/spi.c +++ b/spi.c @@ -82,7 +82,7 @@ int default_spi_read(struct flashctx *flash, uint8_t *buf, unsigned int start, if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI read chunk size not defined " "on this hardware. Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); + SUPPORT_EMAIL "\n", __func__); return 1; } return spi_read_chunked(flash, buf, start, len, max_data); @@ -94,7 +94,7 @@ int default_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned i if (max_data == MAX_DATA_UNSPECIFIED) { msg_perr("%s called, but SPI write chunk size not defined " "on this hardware. Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); + "" SUPPORT_EMAIL "\n", __func__); return 1; } return spi_write_chunked(flash, buf, start, len, max_data); @@ -174,7 +174,7 @@ int register_spi_master(const struct spi_master *mst) ((mst->command == default_spi_send_command) && (mst->multicommand == default_spi_send_multicommand))) { msg_perr("%s called with incomplete master definition. " - "Please report a bug at flashrom(a)flashrom.org\n", + "Please report a bug at " SUPPORT_EMAIL "\n", __func__); return ERROR_FLASHROM_BUG; } diff --git a/spi25.c b/spi25.c index 673bdf5..5cb9632 100644 --- a/spi25.c +++ b/spi25.c @@ -835,7 +835,7 @@ erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode) return &spi_block_erase_db; default: msg_cinfo("%s: unknown erase opcode (0x%02x). Please report " - "this at flashrom(a)flashrom.org\n", __func__, opcode); + "this at " SUPPORT_EMAIL "\n", __func__, opcode); return NULL; } } @@ -1101,7 +1101,7 @@ int default_spi_write_aai(struct flashctx *flash, const uint8_t *buf, unsigned i /* The data sheet requires a start address with the low bit cleared. */ if (start % 2) { msg_cerr("%s: start address not even! Please report a bug at " - "flashrom(a)flashrom.org\n", __func__); + "" SUPPORT_EMAIL "\n", __func__); if (spi_chip_write_1(flash, buf, start, start % 2)) return SPI_GENERIC_ERROR; pos += start % 2; @@ -1119,7 +1119,7 @@ int default_spi_write_aai(struct flashctx *flash, const uint8_t *buf, unsigned i /* The data sheet requires total AAI write length to be even. */ if (len % 2) { msg_cerr("%s: total write length not even! Please report a " - "bug at flashrom(a)flashrom.org\n", __func__); + "bug at " SUPPORT_EMAIL "\n", __func__); /* Do not return an error for now. */ //return SPI_GENERIC_ERROR; } -- Kind regards, Stefan Tauner

1 0

Added support for Macronix MX23L1654, MX23L6454, and MX23L12854
by Michael Coppola 20 Aug '14

20 Aug '14

Hi, I've added support for the Macronix MX23L1654, MX23L6454, and MX23L12854 SPI mask ROM chips. I do not physically have these chips and have not tested, but I used the template for the MX23L3254 which I have previously verified to work with a real chip. Datasheets: http://www.mxic.com.tw/Lists/DataSheet/Attachments/1216/MX23L1654,%203.0-3.… http://www.mxic.com.tw/Lists/DataSheet/Attachments/1234/MX23L6454,%203.0-3.… http://www.mxic.com.tw/Lists/DataSheet/Attachments/1232/MX23L12854,%203.0-3… Signed-off-by: Michael Coppola <michael.n.coppola(a)gmail.com>

2 1

[commit] r1846 - trunk
by repository service 20 Aug '14

20 Aug '14

Author: stefanct Date: Wed Aug 20 20:56:35 2014 New Revision: 1846 URL: http://flashrom.org/trac/flashrom/changeset/1846 Log: Add support for Macronix MX23L1654, MX23L6454 and MX23L12854 mask ROMs. Signed-off-by: Michael Coppola <michael.n.coppola(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Aug 20 17:39:38 2014 (r1845) +++ trunk/flashchips.c Wed Aug 20 20:56:35 2014 (r1846) @@ -6322,6 +6322,22 @@ { .vendor = "Macronix", + .name = "MX23L1654", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L1654, + .total_size = 2048, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", .name = "MX23L3254", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, @@ -6335,6 +6351,38 @@ .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {3000, 3600}, }, + + { + .vendor = "Macronix", + .name = "MX23L6454", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L6454, + .total_size = 8192, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX23L12854", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L12854, + .total_size = 16384, + .page_size = 256, + .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, { .vendor = "Macronix", Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Aug 20 17:39:38 2014 (r1845) +++ trunk/flashchips.h Wed Aug 20 20:56:35 2014 (r1846) @@ -448,7 +448,10 @@ #define MACRONIX_ID 0xC2 /* Macronix (MX) */ /* Mask ROMs */ +#define MACRONIX_MX23L1654 0x0515 #define MACRONIX_MX23L3254 0x0516 +#define MACRONIX_MX23L6454 0x0517 +#define MACRONIX_MX23L12854 0x0518 /* MX25 chips are SPI, first byte of device ID is memory type, * second byte of device ID is log(bitsize)-9. * Generalplus SPI chips seem to be compatible with Macronix

1 0

Re: [flashrom] [PATCH 3/3] Add support for Intel Wildcat Point PCH.
by Stefan Tauner 20 Aug '14

20 Aug '14

Committed in r1845. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 2/3] Add support for Intel Silvermont: Bay Trail, Rangeley and Avoton.
by Stefan Tauner 20 Aug '14

20 Aug '14

Committed in r1844 -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 1/3] Refine Flash Component descriptor handling.
by Stefan Tauner 20 Aug '14

20 Aug '14

On Thu, 14 Aug 2014 15:13:45 -0600 Marc Jones <marcj303(a)gmail.com> wrote: > Switched to read, erase, and write with -VV -o for logs. > > It looks like there is an erase block issue or ivy/pantherpoint. I > have attached two different logs for that, 7472 and cc2. The devices > are MX25L12805(D) and W25Q64.V as identified with flashrom dediprog. > > testflashrom_ivypanther_7472.log > testflashrom_ivypanther_cc2.log Thanks a lot for testing this so thoroughly. Hm yes, that's exactly the same problem as described before. Does Intel's FPT work on these boards? To me it looks as they are impossible to write in situ without an external programmer. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom