- flashrom - mail.coreboot.org

Re: Using libflashrom from fwupd
by Richard Hughes 18 Jan '21

18 Jan '21

On Wed, 16 Aug 2017 at 22:02, David Hendricks <david.hendricks(a)gmail.com> wrote: > The short answer is yes. Nico also briefly mentioned an idea on IRC to use a mechanism similar to flashrom_set_log_callback() to avoid complicating function signatures for the read, write, and verify functions. Dragging up an email thread from a long time ago, apologies. We're finally using libflashrom via fwupd "in production" so to speak. One glaring problem is that the UI "freezes" when we're doing operations with libflashrom, which we've worked around with just making the progress bar spin up and down so at least it looks like the program has not crashed. Of course, the correct thing to do is return the progress information because, as David says, some flash chips take a looong time to write. I've attached a patch for some initial comments, if this looks acceptable I can add some more callbacks in other flash implementations (as at the moment I've only covered SPI stuff) but I didn't want to spend time on a mega patch before I had some kind of initial thumbs-up. Comments welcome. Thanks. Richard.

2 2

GigaDevice GD25LQ128D
by Scott Rutherford 16 Jan '21

16 Jan '21

As requested: Output from : ./util/ich_descriptors_tool/ich_descriptors_tool -f /media/scott/Backups/stock-firmware-CASTA-20210111.rom The flash image has a size of 16777216 [0x1000000] bytes. Peculiar firmware descriptor, assuming Apollo Lake compatibility. The firmware descriptor looks like a Skylake/Sunrise Point descriptor. However, the read frequency isn't set to 17MHz (the only valid value). Please report this message, the output of `ich_descriptors_tool` for your descriptor and the output of `lspci -nn` to flashrom(a)flashrom.org Assuming chipset '9 series Wildcat Point'. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x00040003 FLMAP1 0x17100208 FLMAP2 0x00000000 --- Details --- NR (Number of Regions): 1 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH/SoC Strap Length): 23 FISBA/FPSBA (Flash ICH/PCH/SoC Strap Base Addr): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x080 MSL/PSL (MCH/PROC Strap Length): 0 FMSBA (Flash MCH/PROC Strap Base Address): 0x000 === Component Section === FLCOMP 0x52583ef5 FLILL 0xad604221 --- Details --- Component 1 density: 16 MB Component 2 is not used. Read Clock Frequency: 50 MHz Read ID and Status Clock Freq.: reserved Write and Erase Clock Freq.: reserved Fast Read is supported. Fast Read Clock Frequency: reserved Dual Output Fast Read Support: disabled Invalid instruction 0: 0x21 Invalid instruction 1: 0x42 Invalid instruction 2: 0x60 Invalid instruction 3: 0xad === Region Section === FLREG0 0x00000000 --- Details --- Region 0 (Descr. ) 0x00000000 - 0x00000fff === Master Section === FLMSTR1 0x00200300 FLMSTR2 0x02002300 FLMSTR3 0x00000000 --- Details --- Descr. BIOS ME GbE Platf. BIOS ME w GbE === Upper Map Section === FLUMAP1 0x000002df --- Details --- VTL (length in DWORDS) = 2 VTBA (base address) = 0x000df0 VSCC Table: 1 entries JID0 = 0x001860ef VSCC0 = 0x20252025 Manufacturer ID 0xef, Device ID 0x6018 BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20 === Softstraps === --- North/MCH/PROC (0 entries) --- ISL (23) is greater than the current maximum of 18 entries. Only the first 18 entries will be printed. --- South/ICH/PCH (18 entries) --- STRP0 = 0x000000a1 STRP1 = 0x00ff0000 STRP2 = 0xd8000080 STRP3 = 0x00000665 STRP4 = 0x00000000 STRP5 = 0x00600304 STRP6 = 0x00500000 STRP7 = 0x18000092 STRP8 = 0x00005007 STRP9 = 0x00000000 STRP10 = 0x00000004 STRP11 = 0x00000000 STRP12 = 0x00040104 STRP13 = 0x00004000 STRP14 = 0x00000000 STRP15 = 0x00004000 STRP16 = 0x00000000 STRP17 = 0x00000004 The meaning of the descriptor straps are unknown yet. -------- lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Sky Lake-E DMI3 Registers [8086:2020] (rev 04) 00:04.0 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.1 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.2 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.3 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.4 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.5 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.6 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:04.7 System peripheral [0880]: Intel Corporation Sky Lake-E CBDMA Registers [8086:2021] (rev 04) 00:05.0 System peripheral [0880]: Intel Corporation Sky Lake-E MM/Vt-d Configuration Registers [8086:2024] (rev 04) 00:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS [8086:2025] (rev 04) 00:05.4 PIC [0800]: Intel Corporation Sky Lake-E IOAPIC [8086:2026] (rev 04) 00:08.0 System peripheral [0880]: Intel Corporation Sky Lake-E Ubox Registers [8086:2014] (rev 04) 00:08.1 Performance counters [1101]: Intel Corporation Sky Lake-E Ubox Registers [8086:2015] (rev 04) 00:08.2 System peripheral [0880]: Intel Corporation Sky Lake-E Ubox Registers [8086:2016] (rev 04) 00:14.0 USB controller [0c03]: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller [8086:a2af] 00:14.2 Signal processing controller [1180]: Intel Corporation 200 Series PCH Thermal Subsystem [8086:a2b1] 00:16.0 Communication controller [0780]: Intel Corporation 200 Series PCH CSME HECI #1 [8086:a2ba] 00:17.0 SATA controller [0106]: Intel Corporation 200 Series PCH SATA controller [AHCI mode] [8086:a282] 00:1c.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #1 [8086:a290] (rev f0) 00:1c.2 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #3 [8086:a292] (rev f0) 00:1c.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #5 [8086:a294] (rev f0) 00:1c.6 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #7 [8086:a296] (rev f0) 00:1d.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #9 [8086:a298] (rev f0) 00:1d.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root Port #13 [8086:a29c] (rev f0) 00:1f.0 ISA bridge [0601]: Intel Corporation X299 Chipset LPC/eSPI Controller [8086:a2d2] 00:1f.2 Memory controller [0580]: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller [8086:a2a1] 00:1f.3 Audio device [0403]: Intel Corporation 200 Series PCH HD Audio [8086:a2f0] 00:1f.4 SMBus [0c05]: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller [8086:a2a3] 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-V [8086:15b8] 02:00.0 Network controller [0280]: Intel Corporation Wireless-AC 9260 [8086:2526] (rev 29) 03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller [1b21:2142] 04:00.0 Ethernet controller [0200]: Aquantia Corp. AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion] [1d6a:07b1] (rev 02) 06:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller [1b21:2142] 16:05.0 System peripheral [0880]: Intel Corporation Sky Lake-E VT-d [8086:2034] (rev 04) 16:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS Configuration Registers [8086:2035] (rev 04) 16:05.4 PIC [0800]: Intel Corporation Sky Lake-E IOxAPIC Configuration Registers [8086:2036] (rev 04) 16:08.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.4 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.5 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.6 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:08.7 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.4 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.5 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.6 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:09.7 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:0a.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:0a.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208d] (rev 04) 16:0e.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.4 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.5 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.6 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0e.7 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.4 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.5 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.6 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:0f.7 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:10.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:10.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:208e] (rev 04) 16:1d.0 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2054] (rev 04) 16:1d.1 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2055] (rev 04) 16:1d.2 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2056] (rev 04) 16:1d.3 System peripheral [0880]: Intel Corporation Sky Lake-E CHA Registers [8086:2057] (rev 04) 16:1e.0 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2080] (rev 04) 16:1e.1 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2081] (rev 04) 16:1e.2 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2082] (rev 04) 16:1e.3 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2083] (rev 04) 16:1e.4 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2084] (rev 04) 16:1e.5 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2085] (rev 04) 16:1e.6 System peripheral [0880]: Intel Corporation Sky Lake-E PCU Registers [8086:2086] (rev 04) 64:00.0 PCI bridge [0604]: Intel Corporation Sky Lake-E PCI Express Root Port A [8086:2030] (rev 04) 64:05.0 System peripheral [0880]: Intel Corporation Sky Lake-E VT-d [8086:2034] (rev 04) 64:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS Configuration Registers [8086:2035] (rev 04) 64:05.4 PIC [0800]: Intel Corporation Sky Lake-E IOxAPIC Configuration Registers [8086:2036] (rev 04) 64:08.0 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2066] (rev 04) 64:09.0 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2066] (rev 04) 64:0a.0 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2040] (rev 04) 64:0a.1 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2041] (rev 04) 64:0a.2 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2042] (rev 04) 64:0a.3 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2043] (rev 04) 64:0a.4 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2044] (rev 04) 64:0a.5 System peripheral [0880]: Intel Corporation Sky Lake-E LM Channel 1 [8086:2045] (rev 04) 64:0a.6 System peripheral [0880]: Intel Corporation Sky Lake-E LMS Channel 1 [8086:2046] (rev 04) 64:0a.7 System peripheral [0880]: Intel Corporation Sky Lake-E LMDP Channel 1 [8086:2047] (rev 04) 64:0b.0 System peripheral [0880]: Intel Corporation Sky Lake-E DECS Channel 2 [8086:2048] (rev 04) 64:0b.1 System peripheral [0880]: Intel Corporation Sky Lake-E LM Channel 2 [8086:2049] (rev 04) 64:0b.2 System peripheral [0880]: Intel Corporation Sky Lake-E LMS Channel 2 [8086:204a] (rev 04) 64:0b.3 System peripheral [0880]: Intel Corporation Sky Lake-E LMDP Channel 2 [8086:204b] (rev 04) 64:0c.0 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2040] (rev 04) 64:0c.1 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2041] (rev 04) 64:0c.2 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2042] (rev 04) 64:0c.3 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2043] (rev 04) 64:0c.4 System peripheral [0880]: Intel Corporation Sky Lake-E Integrated Memory Controller [8086:2044] (rev 04) 64:0c.5 System peripheral [0880]: Intel Corporation Sky Lake-E LM Channel 1 [8086:2045] (rev 04) 64:0c.6 System peripheral [0880]: Intel Corporation Sky Lake-E LMS Channel 1 [8086:2046] (rev 04) 64:0c.7 System peripheral [0880]: Intel Corporation Sky Lake-E LMDP Channel 1 [8086:2047] (rev 04) 64:0d.0 System peripheral [0880]: Intel Corporation Sky Lake-E DECS Channel 2 [8086:2048] (rev 04) 64:0d.1 System peripheral [0880]: Intel Corporation Sky Lake-E LM Channel 2 [8086:2049] (rev 04) 64:0d.2 System peripheral [0880]: Intel Corporation Sky Lake-E LMS Channel 2 [8086:204a] (rev 04) 64:0d.3 System peripheral [0880]: Intel Corporation Sky Lake-E LMDP Channel 2 [8086:204b] (rev 04) 65:00.0 VGA compatible controller [0300]: NVIDIA Corporation TU116 [GeForce GTX 1660 Ti] [10de:2182] (rev a1) 65:00.1 Audio device [0403]: NVIDIA Corporation TU116 High Definition Audio Controller [10de:1aeb] (rev a1) 65:00.2 USB controller [0c03]: NVIDIA Corporation TU116 USB 3.1 Host Controller [10de:1aec] (rev a1) 65:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU116 USB Type-C UCSI Controller [10de:1aed] (rev a1) b2:01.0 PCI bridge [0604]: Intel Corporation Sky Lake-E PCI Express Root Port B [8086:2031] (rev 04) b2:05.0 System peripheral [0880]: Intel Corporation Sky Lake-E VT-d [8086:2034] (rev 04) b2:05.2 System peripheral [0880]: Intel Corporation Sky Lake-E RAS Configuration Registers [8086:2035] (rev 04) b2:05.4 PIC [0800]: Intel Corporation Sky Lake-E IOxAPIC Configuration Registers [8086:2036] (rev 04) b2:12.0 Performance counters [1101]: Intel Corporation Sky Lake-E M3KTI Registers [8086:204c] (rev 04) b2:12.1 Performance counters [1101]: Intel Corporation Sky Lake-E M3KTI Registers [8086:204d] (rev 04) b2:12.2 System peripheral [0880]: Intel Corporation Sky Lake-E M3KTI Registers [8086:204e] (rev 04) b2:15.0 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04) b2:16.0 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04) b2:16.4 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04) b2:17.0 System peripheral [0880]: Intel Corporation Sky Lake-E M2PCI Registers [8086:2018] (rev 04) b3:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983 [144d:a808] Dr Scott Rutherford Thats Useful, Inc. 112 Catamaran St, #5 Marina Del Rey CA, 90292 Email: scott(a)thatsuseful.com Mobile: +1 415 533 9017 AngelList: https://angel.co/drscottrutherford LinkedIn: http://uk.linkedin.com/in/scottrutherford

1 0

Flashrom Test Report (+ DOS build)
by Howard Ho 16 Jan '21

16 Jan '21

Hi, I successfully read/wrote a BIOS image file to a MSI Z390-A PRO (MS-7B98) motherboard via both Linux and DOS builds of flashrom based on the master branch on Jan. 1, 2021. Attached are reports/logs. Also, I would like to report that the "buildbot archive" link for finding DOS bulids of flashrom linked on https://flashrom.org/Downloads is not working for me as I am not able to connect to that site (seems like https://buildbot.flashrom.org/ is no longer online). So I built for myself a copy of flashrom for DOS. After making some changes to the code, I was able to cross-compile for DOS on Linux. I used pciutils 3.6.4, which did not require the patch to cross-compile the pciutils library for DOS. I put my build steps as well as my tested PC findings at https://github.com/HowardHo2021/flashrom-DOS-port. Regards, Howard

1 1

GD25Q10 - Flash Log
by Sean Rhodes 15 Jan '21

15 Jan '21

Please see the attached flash log as chip reported as untested.

1 0

Opinions on it87spi.c hack to support IT8686E?
by Pete Smith 09 Jan '21

09 Jan '21

Hi, I have a a GIGABYTE GA-H270N-WIFI motherboard with DualBIOS feature. Flashrom 1.2 is unable to select between the two flash chips with dualbiosindex parameter, as the Super I/O chip (ITE IT8686E) is unsupported: "Super I/O ID 0x8686 is not on the list of flash-capable controllers." In a naive attempt, I just tried to add the chip ID to the list: --- a/it87spi.c +++ b/it87spi.c @@ -256,6 +256,7 @@ int init_superio_ite(void) case 0x8718: case 0x8720: case 0x8728: + case 0x8686: ret |= it87spi_probe(superios[i].port); break; default: This modification made flashrom able to select between the flash chips: # flashrom -p internal:dualbiosindex= DualBIOS: Selected chip: 0 # flashrom -p internal:dualbiosindex=1 DualBIOS: Selected chip: 1 # flashrom -p internal:dualbiosindex= DualBIOS: Selected chip: 1 Reading the flash content also seems to work: # flashrom -p internal:dualbiosindex=0 -r M_BIOS.bin Enabling flash write... SPI Configuration is locked down. Enabling hardware sequencing because some important opcode is locked. OK. DualBIOS: Selected chip: 0 Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Reading flash... done. # flashrom -p internal:dualbiosindex=1 -r B_BIOS.bin Enabling flash write... SPI Configuration is locked down. Enabling hardware sequencing because some important opcode is locked. OK. DualBIOS: Selected chip: 1 Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. Reading flash... done. Comparing the two firmware dumps, I find the only difference is that M_BIOS.bin contains my current BIOS settings which B_BIOS.bin does not, so I'm quite sure that these dumps are actually from two different flash chips. However, if enabling verbose (-VV) output while reading flash, I also see this message, which I don't know if normal or not: "No IT87* serial flash segment enabled." I have not yet tried writing to any of the flash chips, as I would really appreciate if someone with more experience than me could comment on this modification first, and maybe highlight problems I'm not currently aware of? Thanks in advance. Best regards, Pete Smith

2 1

chipset Intel C226 is marked as untested
by Philippe Lefèvre 07 Jan '21

07 Jan '21

Hello, just curious about my ROM, I used flashrom to see what is in and would like, why not, replace it by a coreboot version, and let you know. It seems that it wouldn't work as enable flash write seems not working. My box is a DELL Precision T1700 Here is what I get : flashrom v0.9.9-r1954 on Linux 4.9.0-14-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found chipset "Intel C226". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000 /dev/mem mmap failed: Operation not permitted FAILED! FATAL ERROR! Error: Programmer initialization failed. Hope this can help Regards

1 0

Re: acer aspire 7750g
by Mohammed Salhi 06 Jan '21

06 Jan '21

Von meinem iPhone gesendet

1 0

Successfully tested flashrom linux_spi with FM25F02(A)
by André Plümer 05 Jan '21

05 Jan '21

Hello, if someone likes to update the wiki for FM25F02(A) :) Managed to read corrupted GT730 GPU-BIOS and write back original rom via raspberry pi 3 with rasbian buster. I had to git clone source + make + make install. apt-Version of flashrom (1.0) didn't know the FM25F02(A) flash-chip, but flashrom v1.2-174-g32f4cb4 worked. GPU now working again! I had to pad the original rom to fit the flash chip size. The Size in the error-message of flashrom was helpful for truncate-command (which in fact extends the file if a bigger size is given): [...] Error: Image size (168960 B) doesn't match the flash chip's size (262144 B)! pi@raspberrypi:~ $ cp -a pny_gt730_2g_orig.rom pny_gt730_2g_orig_extended.rom pi@raspberrypi:~ $ truncate -s 262144 pny_gt730_2g_orig_extended.rom pi@raspberrypi:~ $ sudo flashrom -p linux_spi:dev=/dev/spidev0.0 -w pny_gt730_2g_orig_extended.rom flashrom v1.2-174-g32f4cb4 on Linux 5.4.79-v7+ (armv7l) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Using default 2000kHz clock. Use 'spispeed' parameter to override. Found Fudan flash chip "FM25F02(A)" (256 kB, SPI) on linux_spi. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. -- ░░░░░░░░░░░░░░░░░░░ ░░█▀█░█▀█░█▀▀░█░█░░ ░░█▀█░█▀▀░█░█░█▄█░░ ░░▀░▀░▀░░░▀▀▀░▀░▀░░ ░░░░░░░░░░░░░░░░░░░ André Plümer genannt Woistpeter Fachinformatiker Systemintegration Studierender BA Gestaltung "Digital Media and Experiment" Fachhochschule Bielefeld https://apgw.de/fh

1 0

Please report this to flashrom@flashrom.org
by Matt Rixman 04 Jan '21

04 Jan '21

Hi, I'm the asker of this question: https://superuser.com/questions/1613342/why-do-windows-updates-make-linux-r… I was hoping to use `flashrom` to gather before/after dumps, which I can (hopefully) compare to get to the bottom of my problem. When I run: `sudo flashrom --programmer internal` I get this: --- begin output --- flashrom on Linux 4.19.0-13-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... FCH device found but SMBus revision 0x59 does not match known values. Please report this to flashrom(a)flashrom.org and include this log and the output of lspci -nnvx, thanks!. Could not determine chipset generation.PROBLEMS, continuing anyway No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. --- end output --- the output of lspci is attached. Thanks, Matt

2 1

w25q16jv
by Luis Martinez 03 Jan '21

03 Jan '21

need some help with erasing and writing to a w25q16jv . its not in the supported list but i was able to read from it by forcing it with a similar chip i force read using w25q16.v but i cant erase or write this is what it reads it at. Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: compare_id: id1 0xef, id2 0x7015 Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI) on linux_spi. Probing for Generic Variable Size SPI chip, 64 kB: Probing for Generic unknown SPI chip (RDID), 0 kB: compare_id: id1 0xef, id2 0x7015 Probing for Generic unknown SPI chip (REMS), 0 kB: compare_id: id1 0xef, id2 0x14 Found Winbond flash chip "unknown Winbond (ex Nexcom) SPI chip" (0 kB, SPI). btw i got three valid dumps

1 0

ps:
by msuzuqi＠posteo.net 03 Jan '21

03 Jan '21

By the way, PSU has just broken, right after I sent the previous email. Masaru Suzuqi

1 0

please check logs
by msuzuqi＠posteo.net 03 Jan '21

03 Jan '21

Hello, I have been failing to flash libreboot rom on a X200 with a Beaglebone external flashing. Please check logs and tell me what the cause do you think. I succeeded just once between the two logs. But this is not the first time succeeded. I mean I have been using the laptop for around a year with libreboot. thanks. Masaru Suzuqi -- To run a command as administrator (user "root"), use "sudo <command>". To become root use "sudo -i". See "man sudo_root" for details. trisquel@trisquel:~$ ssh debian(a)beaglebone.local The authenticity of host 'beaglebone.local (192.168.6.2)' can't be established. ECDSA key fingerprint is SHA256:7UPnDqxHhM/cTjLfwf3nuKfeZermAMP4AxOaUCARZpk. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'beaglebone.local,192.168.6.2' (ECDSA) to the list of known hosts. Debian GNU/Linux 9 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian(a)beaglebone.local's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Aug 4 02:41:43 2019 from 192.168.7.1 debian@beaglebone:~$ su Password: su: Authentication failure debian@beaglebone:~$ sudo config-pin P9.17 spi_cs [sudo] password for debian: debian@beaglebone:~$ sudo config-pin P9.18 spi_cs Invalid mode: spi_cs debian@beaglebone:~$ sudo config-pin P9.18 spi debian@beaglebone:~$ sudo config-pin P9.21 spi debian@beaglebone:~$ sudo config-pin P9.22 spi_sclk debian@beaglebone:~$ ls /dev/spides* ls: cannot access '/dev/spides*': No such file or directory debian@beaglebone:~$ sudo ls /dev/spides* ls: cannot access '/dev/spides*': No such file or directory debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. No operations were specified. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0xcf, failed byte count from 0x00000000-0x007fffff: 0x17d9 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0x31, failed byte count from 0x00000000-0x007fffff: 0x12fb Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x5f, failed byte count from 0x00003000-0x00003fff: 0xb7c ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x5da5 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf7613 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf7613 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003001! Expected=0x5f, Found=0x31, failed byte count from 0x00000000-0x007fffff: 0xc9c Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x2f45 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x3605 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x46, failed byte count from 0x00003000-0x00003fff: 0x6c0 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x47a3 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf59d8 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xf59d8 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x56d9 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... delay loop is unreliable, trying to continue OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x3daaf Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x43, failed byte count from 0x00000000-0x007fffff: 0x12066 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00003000! Expected=0xff, Found=0x43, failed byte count from 0x00003000-0x00003fff: 0x6a8 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x0000ffff: 0x4292 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xb9a82 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x5a, failed byte count from 0x00000000-0x007fffff: 0xb9a82 ERASE FAILED! Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on linux_spi. === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Read is not working on this chip. Aborting. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x1507 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x1564 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. No operations were specified. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x46, failed byte count from 0x00000000-0x007fffff: 0x40fe Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00003000! Expected=0x5f, Found=0x41, failed byte count from 0x00000000-0x007fffff: 0xd9f1 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ -- flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0x2978 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x28fb Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ logout Connection to beaglebone.local closed. trisquel@trisquel:~$ ssh debian(a)beaglebone.local Debian GNU/Linux 9 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian(a)beaglebone.local's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Aug 4 02:40:49 2019 from 192.168.6.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x28a5 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ logout Connection to beaglebone.local closed. trisquel@trisquel:~$ ssh debian(a)beaglebone.local Debian GNU/Linux 9 BeagleBoard.org Debian Image 2019-08-03 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] debian(a)beaglebone.local's password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun Aug 4 03:38:32 2019 from 192.168.6.1 debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo config-pin P9.17 spi_cs [sudo] password for debian: Sorry, try again. [sudo] password for debian: debian@beaglebone:~$ sudo config-pin p9.18 spi debian@beaglebone:~$ sudo config-pin p9.21 spi debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x1aa0 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x19bc Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo config-pin P9.17 spi_cs debian@beaglebone:~$ sudo config-pin p9.18 spi debian@beaglebone:~$ sudo config-pin p9.21 spi debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xec4 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xb48 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --force --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xa24 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000e00! Expected=0xff, Found=0x15, failed byte count from 0x00000000-0x007fffff: 0xe29 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo config-pin P9.17 spi_cs debian@beaglebone:~$ sudo config-pin p9.18 spi debian@beaglebone:~$ sudo config-pin p9.21 spi debian@beaglebone:~$ sudo config-pin p9.22 spi_sclk debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000001! Expected=0xa5, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x11f8 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ ls /dev/spidev* /dev/spidev1.0 /dev/spidev1.1 /dev/spidev2.0 /dev/spidev2.1 debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. No operations were specified. debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/txt.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... ^C debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5a, Found=0x08, failed byte count from 0x00000000-0x007fffff: 0x8be85 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! debian@beaglebone:~$ sudo ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 --write /home/debian/v.rom [sudo] password for debian: flashrom v0.9.9-unknown on Linux 4.14.108-ti-r113 (armv7l) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip...

1 0

Unhandled programmer parameters: dualbiosindex?
by Pete Smith 02 Jan '21

02 Jan '21

I'm trying to use flashrom 1.2 on a GIGABYTE GA-H270N-WIFI motherboard with DualBIOS feature. According to manpage, one can check which of the two flash chips is currently selected like this: flashrom -p internal:dualbiosindex This error message is shown instead: Unhandled programmer parameters: dualbiosindex Aborting. Error: Programmer initialization failed. If I don't specify the dualbiosindex parameter this message is shown: Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. No operations were specified. I'm also able to dump a valid copy of the firmware without problems, but I'm unable to control which of the two flash chips are being read (or written). flashrom -V -p internal:dualbiosindex ======================================================================= flashrom 1.2 on Linux 4.19.164_1 (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.7.0, GCC 9.3.0, little endian Command line (3 args): flashrom -V -p internal:dualbiosindex Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer /sys/class/mtd/mtd0 does not exist No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "H270N-WIFI" DMI string system-version: "Default string" DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "H270N-WIFI-CF" DMI string baseboard-version: "x.x" Found ITE Super I/O, ID 0x8686 on port 0x2e Found chipset "Intel H270" with PCI ID 8086:a2c4. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... BIOS_SPI_BC = 0xa88: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI) Top Swap: not enabled SPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x89: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0x00007fbbfbbcb000 (phys = 0xfe010000) 0x04: 0xe004 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=1, SCIP=0, PRR34_LOCKDN=0, WRSDIS=0, FDOPSS=1, FDV=1, FLOCKDN=1 SPI Configuration is locked down. Reading OPCODES... done 0x06: 0x3f00 (HSFC) HSFC: FGO=0, HSFC=0, WET=0, FDBC=63, SME=0 0x0c: 0x00000000 (DLOCK) DLOCK: BMWAG_LOCKDN=0, BMRAG_LOCKDN=0, SBMWAG_LOCKDN=0, SBMRAG_LOCKDN=0, PR0_LOCKDN=0, PR1_LOCKDN=0, PR2_LOCKDN=0, PR3_LOCKDN=0, PR4_LOCKDN=0, SSEQ_LOCKDN=0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x0fff0200 FREG1: BIOS region (0x00200000-0x00ffffff) is read-write. 0x5C: 0x01ff0003 FREG2: Management Engine region (0x00003000-0x001fffff) is read-write. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0xa0: 0x90 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=1 0xa1: 0xfe0000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=6 0xa4: 0x0000 (PREOP) 0xa6: 0x0000 (OPTYPE) 0xa8: 0x00000000 (OPMENU) 0xac: 0x00000000 (OPMENU+4) 0xc4: 0xf3d82005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xc8: 0x20452045 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20 Enabling hardware sequencing because some important opcode is locked. OK. Unhandled programmer parameters: dualbiosindex Aborting. Error: Programmer initialization failed. Restoring PCI config space for 00:1f:5 reg 0xdc ======================================================================= Any ideas why this happens? Thanks. Best regards, Pete Smith

1 0

problem flashing chromebook pixelbook
by Robert Gibbon 30 Dec '20

30 Dec '20

So I disabled write protection with a suzy-qable but when I tried to flash the system I got an error, please see below. Can you advise what I should do? thanks Rob flashrom 0.9.9 : a5cb316d : Nov 13 2020 18:00:28 UTC on Linux 4.4.237-19358-g17705661373a (x86_64) flashrom was built with unknown PCI library, LLVM Clang 11.0.0 (/var/tmp/portage/sys-devel/llvm-11.0_pre399094_p20200824-r4/work/llvm-11.0_pre399094_p20200824/clang 83080a294ad7d145d758821bcf4354ad0cb7d299), big endian Command line (5 args): /usr/sbin/flashrom -n -w -o /tmp/flashrom.log coreboot_tiano-eve-mrchromebox_20200604.rom Using default programmer "internal" with arguments "". Acquiring lock (timeout=180 sec)... Opened file lock "/run/lock/firmware_utility_lock" Lock acquired. disable_power_management: Disabling power management. Calibrating delay loop... OS timer resolution is 1 usecs, 1556M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1009 us, 10000 myus = 10282 us, 4 myus = 4 us, OK. Initializing internal programmer /sys/class/mtd/mtd0 does not exist Found candidate at: 00000500-00000528 Found coreboot table at 0x00000500. Found candidate at: 00000000-00000578 Found coreboot table at 0x00000000. coreboot table found at 0x7aabe000. coreboot header(24) checksum: d36d table(1376) checksum: 9557 entries: 45 Vendor ID: Google, part ID: Eve Using External DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Google" DMI string system-product-name: "Eve" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "Google" DMI string baseboard-product-name: "Eve" DMI string baseboard-version: "1.0" get_target_bus_from_chipset() returns 0x10. Found chipset "Intel Skylake" with PCI ID 8086:9d24. Enabling flash write... SPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x8b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled Warning: Setting BIOS Control at 0xdc from 0x8b to 0x89 failed. New value is 0x8b. SPI BAR is = 0xd123d000 BIOS_SPI_BC = 0x8b: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI) Top Swap: not enabled SPIBAR = 0x00007bde63bc0000 + 0x0000 0x04: 0x0010e000 (HSFSC) WARNING: SPI Configuration Lockdown activated. 0x08: 0x00000000 (FADDR) 0x50: 0x00004acb (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0xcb 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x0fff0200 FREG1: BIOS region (0x00200000-0x00ffffff) is read-write. 0x5C: 0x01ff0001 FREG2: Management Engine region (0x00001000-0x001fffff) is locked. 0x60: 0x00007fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00007fff FREG4: Platform Data region is unused. 0x68: 0x00007fff FREG5: Device Expansion region is unused. 0x6C: 0x00007fff FREG6: BIOS2 region is unused. 0x70: 0x00007fff FREG7: unknown region is unused. Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. 0x74: 0x0010e000 FREG8: EC/BMC region is unused. 0x84: 0x89ef09d0 PR0: Warning: 0x009d0000-0x009effff is read-only. 0x88: 0x00000000 (PR1 is unused) 0x8C: 0x00000000 (PR2 is unused) 0x90: 0x00000000 (PR3 is unused) 0x94: 0x00000000 (PR4 is unused) 0x98: 0x00000000 (GPR0 is unused) 0x9C: 0x00000000 (GPR1 is unused) 0xA0: 0xfe000080 GPR2: Warning: 0x00080000-0x07e00fff is read-only. 0xA4: 0xb32d5006 GPR3: Warning: 0x05006000-0x0332dfff is read-only. Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x00040003 FLMAP1 0x42100208 FLMAP2 0x00310330 --- Details --- NR (Number of Regions): 10 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH/SoC Strap Length): 66 FISBA/FPSBA (Flash ICH/PCH/SoC Strap Base Addr): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x080 MSL/PSL (MCH/PROC Strap Length): 3 FMSBA (Flash MCH/PROC Strap Base Address): 0x300 === Component Section === FLCOMP 0x125c00f5 FLILL 0xad604221 FLILL1 0xc7c4b9b7 --- Details --- Component 1 density: 16 MB Component 2 is not used. Read Clock Frequency: 17 MHz Read ID and Status Clock Freq.: 48 MHz Write and Erase Clock Freq.: 48 MHz Fast Read is supported. Fast Read Clock Frequency: 48 MHz Dual Output Fast Read Support: enabled Invalid instruction 0: 0x21 Invalid instruction 1: 0x42 Invalid instruction 2: 0x60 Invalid instruction 3: 0xad Invalid instruction 4: 0xb7 Invalid instruction 5: 0xb9 Invalid instruction 6: 0xc4 Invalid instruction 7: 0xc7 === Region Section === FLREG0 0x00000000 FLREG1 0x0fff0200 FLREG2 0x01ff0001 FLREG3 0x00007fff FLREG4 0x00007fff FLREG5 0x00007fff FLREG6 0x00007fff FLREG7 0x00007fff FLREG8 0x00007fff FLREG9 0x00007fff --- Details --- Region 0 (Descr. ) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00200000 - 0x00ffffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. Region 4 (Platf. ) is unused. Region 5 (DevExp ) is unused. Region 6 (BIOS2 ) is unused. Region 7 (unknown) is unused. Region 8 (EC/BMC ) is unused. Region 9 (unknown) is unused. === Master Section === FLMSTR1 0x00a00b00 FLMSTR2 0x00c00d00 FLMSTR3 0x00800800 --- Details --- FD BIOS ME GbE Pltf Reg5 Reg6 Reg7 EC Reg9 BIOS r rw rw ME r rw rw GbE rw OK. The following protocols are supported: Programmer-specific. Probing for Generic HWSEQ chip, 0 kB: Chip identified: GD25Q127C/GD25Q128C Found 1 attached SPI flash chip with a density of 16384 kB. There are 4096 erase blocks with 4096 B each. Found GigaDevice flash chip "GD25Q127C/GD25Q128C" (16384 kB, Programmer-specific) mapped at physical address 0x0000000000000000. This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). No -i argument is specified, set ignore_fmap. Reading Status register Some block protection in effect, disabling... Writing status register Reading Status register disabled. Reading old contents from flash chip... 000000-0xffffff:R ignoring error when reading 0x0-0xffffff done. fix_erasers_if_needed: kept eraser at 0 fill_sorted_erasers: found 1 valid erasers 000000..0a1fff 1000 x 162 eraser 0 0a9000..0a9fff 1000 x 1 eraser 0 0ab000..0abfff 1000 x 1 eraser 0 0ad000..0adfff 1000 x 1 eraser 0 0af000..0affff 1000 x 1 eraser 0 0b1000..0b7fff 1000 x 7 eraser 0 0b9000..0b9fff 1000 x 1 eraser 0 0bb000..0bbfff 1000 x 1 eraser 0 0bd000..0bdfff 1000 x 1 eraser 0 0bf000..0bffff 1000 x 1 eraser 0 0c1000..0c1fff 1000 x 1 eraser 0 0c3000..0c3fff 1000 x 1 eraser 0 0c5000..0c5fff 1000 x 1 eraser 0 0c7000..0c7fff 1000 x 1 eraser 0 0c9000..0c9fff 1000 x 1 eraser 0 0cb000..0cbfff 1000 x 1 eraser 0 0cd000..0cdfff 1000 x 1 eraser 0 0cf000..0cffff 1000 x 1 eraser 0 0d1000..0d1fff 1000 x 1 eraser 0 0d3000..0d3fff 1000 x 1 eraser 0 0d5000..0d5fff 1000 x 1 eraser 0 0d7000..0d7fff 1000 x 1 eraser 0 0d9000..0d9fff 1000 x 1 eraser 0 0db000..0dbfff 1000 x 1 eraser 0 0dd000..0ddfff 1000 x 1 eraser 0 0df000..0dffff 1000 x 1 eraser 0 0e1000..0e1fff 1000 x 1 eraser 0 0e3000..0e3fff 1000 x 1 eraser 0 0e5000..0e5fff 1000 x 1 eraser 0 0e7000..0e7fff 1000 x 1 eraser 0 0e9000..0e9fff 1000 x 1 eraser 0 0eb000..0ebfff 1000 x 1 eraser 0 0ed000..0edfff 1000 x 1 eraser 0 0ef000..0effff 1000 x 1 eraser 0 0f1000..0f1fff 1000 x 1 eraser 0 0f3000..0f3fff 1000 x 1 eraser 0 0f5000..0f5fff 1000 x 1 eraser 0 0f7000..0f7fff 1000 x 1 eraser 0 0f9000..0f9fff 1000 x 1 eraser 0 0fb000..0fbfff 1000 x 1 eraser 0 0fd000..0fdfff 1000 x 1 eraser 0 0ff000..0fffff 1000 x 1 eraser 0 101000..101fff 1000 x 1 eraser 0 103000..103fff 1000 x 1 eraser 0 105000..105fff 1000 x 1 eraser 0 107000..107fff 1000 x 1 eraser 0 109000..109fff 1000 x 1 eraser 0 10b000..10bfff 1000 x 1 eraser 0 111000..19bfff 1000 x 139 eraser 0 9d0000..9d3fff 1000 x 4 eraser 0 9e0000..9e1fff 1000 x 2 eraser 0 9f0000..9f0fff 1000 x 1 eraser 0 9f4000..9f5fff 1000 x 2 eraser 0 9f8000..9f8fff 1000 x 1 eraser 0 9fa000..9fbfff 1000 x 2 eraser 0 a00000..a14fff 1000 x 21 eraser 0 bff000..dcafff 1000 x 460 eraser 0 dd8000..ea0fff 1000 x 201 eraser 0 ff4000..ffbfff 1000 x 8 eraser 0 fff000..ffffff 1000 x 1 eraser 0 Erasing and writing flash chip... 0x000000-0x000fff: E DENIED, 0x001000-0x001fff: W DENIED, 0x002000-0x002fff: W DENIED, 0x003000-0x003fff: W DENIED, 0x004000-0x004fff: W DENIED, 0x005000-0x005fff: W DENIED, 0x006000-0x006fff: W DENIED, 0x007000-0x007fff: W DENIED, 0x008000-0x008fff: W DENIED, 0x009000-0x009fff: W DENIED, 0x00a000-0x00afff: W DENIED, 0x00b000-0x00bfff: W DENIED, 0x00c000-0x00cfff: W DENIED, 0x00d000-0x00dfff: W DENIED, 0x00e000-0x00efff: W DENIED, 0x00f000-0x00ffff: W DENIED, 0x010000-0x010fff: W DENIED, 0x011000-0x011fff: W DENIED, 0x012000-0x012fff: W DENIED, 0x013000-0x013fff: W DENIED, 0x014000-0x014fff: W DENIED, 0x015000-0x015fff: W DENIED, 0x016000-0x016fff: W DENIED, 0x017000-0x017fff: W DENIED, 0x018000-0x018fff: W DENIED, 0x019000-0x019fff: W DENIED, 0x01a000-0x01afff: W DENIED, 0x01b000-0x01bfff: W DENIED, 0x01c000-0x01cfff: W DENIED, 0x01d000-0x01dfff: W DENIED, 0x01e000-0x01efff: W DENIED, 0x01f000-0x01ffff: W DENIED, 0x020000-0x020fff: W DENIED, 0x021000-0x021fff: W DENIED, 0x022000-0x022fff: W DENIED, 0x023000-0x023fff: W DENIED, 0x024000-0x024fff: W DENIED, 0x025000-0x025fff: W DENIED, 0x026000-0x026fff: W DENIED, 0x027000-0x027fff: W DENIED, 0x028000-0x028fff: W DENIED, 0x029000-0x029fff: W DENIED, 0x02a000-0x02afff: W DENIED, 0x02b000-0x02bfff: W DENIED, 0x02c000-0x02cfff: W DENIED, 0x02d000-0x02dfff: W DENIED, 0x02e000-0x02efff: W DENIED, 0x02f000-0x02ffff: W DENIED, 0x030000-0x030fff: W DENIED, 0x031000-0x031fff: W DENIED, 0x032000-0x032fff: W DENIED, 0x033000-0x033fff: W DENIED, 0x034000-0x034fff: W DENIED, 0x035000-0x035fff: W DENIED, 0x036000-0x036fff: W DENIED, 0x037000-0x037fff: W DENIED, 0x038000-0x038fff: W DENIED, 0x039000-0x039fff: W DENIED, 0x03a000-0x03afff: W DENIED, 0x03b000-0x03bfff: W DENIED, 0x03c000-0x03cfff: W DENIED, 0x03d000-0x03dfff: W DENIED, 0x03e000-0x03efff: W DENIED, 0x03f000-0x03ffff: W DENIED, 0x040000-0x040fff: W DENIED, 0x041000-0x041fff: W DENIED, 0x042000-0x042fff: W DENIED, 0x043000-0x043fff: W DENIED, 0x044000-0x044fff: W DENIED, 0x045000-0x045fff: W DENIED, 0x046000-0x046fff: W DENIED, 0x047000-0x047fff: W DENIED, 0x048000-0x048fff: W DENIED, 0x049000-0x049fff: W DENIED, 0x04a000-0x04afff: W DENIED, 0x04b000-0x04bfff: W DENIED, 0x04c000-0x04cfff: W DENIED, 0x04d000-0x04dfff: W DENIED, 0x04e000-0x04efff: W DENIED, 0x04f000-0x04ffff: W DENIED, 0x050000-0x050fff: W DENIED, 0x051000-0x051fff: W DENIED, 0x052000-0x052fff: W DENIED, 0x053000-0x053fff: W DENIED, 0x054000-0x054fff: W DENIED, 0x055000-0x055fff: W DENIED, 0x056000-0x056fff: W DENIED, 0x057000-0x057fff: W DENIED, 0x058000-0x058fff: W DENIED, 0x059000-0x059fff: W DENIED, 0x05a000-0x05afff: W DENIED, 0x05b000-0x05bfff: W DENIED, 0x05c000-0x05cfff: W DENIED, 0x05d000-0x05dfff: W DENIED, 0x05e000-0x05efff: W DENIED, 0x05f000-0x05ffff: W DENIED, 0x060000-0x060fff: W DENIED, 0x061000-0x061fff: W DENIED, 0x0620 00-0x062fff: W DENIED, 0x063000-0x063fff: W DENIED, 0x064000-0x064fff: W DENIED, 0x065000-0x065fff: W DENIED, 0x066000-0x066fff: W DENIED, 0x067000-0x067fff: W DENIED, 0x068000-0x068fff: W DENIED, 0x069000-0x069fff: W DENIED, 0x06a000-0x06afff: W DENIED, 0x06b000-0x06bfff: W DENIED, 0x06c000-0x06cfff: W DENIED, 0x06d000-0x06dfff: W DENIED, 0x06e000-0x06efff: W DENIED, 0x06f000-0x06ffff: W DENIED, 0x070000-0x070fff: W DENIED, 0x071000-0x071fff: W DENIED, 0x072000-0x072fff: W DENIED, 0x073000-0x073fff: W DENIED, 0x074000-0x074fff: W DENIED, 0x075000-0x075fff: W DENIED, 0x076000-0x076fff: W DENIED, 0x077000-0x077fff: W DENIED, 0x078000-0x078fff: W DENIED, 0x079000-0x079fff: W DENIED, 0x07a000-0x07afff: W DENIED, 0x07b000-0x07bfff: W DENIED, 0x07c000-0x07cfff: W DENIED, 0x07d000-0x07dfff: W DENIED, 0x07e000-0x07efff: W DENIED, 0x07f000-0x07ffff: W DENIED, 0x080000-0x080fff: W DENIED, 0x081000-0x081fff: W DENIED, 0x082000-0x082fff: W DENIED, 0x083000-0x083fff: W DENIED, 0x084000-0x084fff: W DENIED, 0x085000-0x085fff: W DENIED, 0x086000-0x086fff: W DENIED, 0x087000-0x087fff: W DENIED, 0x088000-0x088fff: W DENIED, 0x089000-0x089fff: W DENIED, 0x08a000-0x08afff: W DENIED, 0x08b000-0x08bfff: W DENIED, 0x08c000-0x08cfff: W DENIED, 0x08d000-0x08dfff: W DENIED, 0x08e000-0x08efff: W DENIED, 0x08f000-0x08ffff: W DENIED, 0x090000-0x090fff: W DENIED, 0x091000-0x091fff: W DENIED, 0x092000-0x092fff: W DENIED, 0x093000-0x093fff: W DENIED, 0x094000-0x094fff: W DENIED, 0x095000-0x095fff: W DENIED, 0x096000-0x096fff: W DENIED, 0x097000-0x097fff: W DENIED, 0x098000-0x098fff: W DENIED, 0x099000-0x099fff: W DENIED, 0x09a000-0x09afff: W DENIED, 0x09b000-0x09bfff: W DENIED, 0x09c000-0x09cfff: W DENIED, 0x09d000-0x09dfff: W DENIED, 0x09e000-0x09efff: W DENIED, 0x09f000-0x09ffff: W DENIED, 0x0a0000-0x0a0fff: W DENIED, 0x0a1000-0x0a1fff: W DENIED, 0x0a9000-0x0a9fff: W DENIED, 0x0ab000-0x0abfff: W DENIED, 0x0ad000-0x0adfff: W DENIED, 0x0af000-0x0affff: W DENIED, 0x0b1000-0x0b1fff: W DENIED, 0x0b2000-0x0b2fff: W DENIED, 0x0b3000-0x0b3fff: W DENIED, 0x0b4000-0x0b4fff: W DENIED, 0x0b5000-0x0b5fff: W DENIED, 0x0b6000-0x0b6fff: W DENIED, 0x0b7000-0x0b7fff: W DENIED, 0x0b9000-0x0b9fff: W DENIED, 0x0bb000-0x0bbfff: W DENIED, 0x0bd000-0x0bdfff: W DENIED, 0x0bf000-0x0bffff: W DENIED, 0x0c1000-0x0c1fff: W DENIED, 0x0c3000-0x0c3fff: W DENIED, 0x0c5000-0x0c5fff: W DENIED, 0x0c7000-0x0c7fff: W DENIED, 0x0c9000-0x0c9fff: W DENIED, 0x0cb000-0x0cbfff: W DENIED, 0x0cd000-0x0cdfff: W DENIED, 0x0cf000-0x0cffff: W DENIED, 0x0d1000-0x0d1fff: W DENIED, 0x0d3000-0x0d3fff: W DENIED, 0x0d5000-0x0d5fff: W DENIED, 0x0d7000-0x0d7fff: W DENIED, 0x0d9000-0x0d9fff: W DENIED, 0x0db000-0x0dbfff: W DENIED, 0x0dd000-0x0ddfff: W DENIED, 0x0df000-0x0dffff: W DENIED, 0x0e1000-0x0e1fff: W DENIED, 0x0e3000-0x0e3fff: W DENIED, 0x0e5000-0x0e5fff: W DENIED, 0x0e7000-0x0e7fff: W DENIED, 0x0e9000-0x0e9fff: W DENIED, 0x0eb000-0x0ebfff: W DENIED, 0x0ed000-0x0edfff: W DENIED, 0x0ef000-0x0effff: W DENIED, 0x0f1000-0x0f1fff: W DENIED, 0x0f3000-0x0f3fff: W DENIED, 0x0f5000-0x0f5fff: W DENIED, 0x0f7000-0x0f7fff: W DENIED, 0x0f9000-0x0f9fff: W DENIED, 0x0fb000-0x0fbfff: W DENIED, 0x0fd000-0x0fdfff: W DENIED, 0x0ff000-0x0fffff: W DENIED, 0x101000-0x101fff: W DENIED, 0x103000-0x103fff: W DENIED, 0x105000-0x105fff: W DENIED, 0x107000-0x107fff: W DENIED, 0x109000-0x109fff: W DENIED, 0x10b000-0x10bfff: W DENIED, 0x111000-0x111fff: W DENIED, 0x112000-0x112fff: W DENIED, 0x113000-0x113fff: W DENIED, 0x114000-0x114fff: W DENIED, 0x115000-0x115fff: W DENIED, 0x116000-0x116fff: W DENIED, 0x117000-0x117fff: W DENIED, 0x118000-0x118fff: W DENIED, 0x119000-0x119fff: W DENIED, 0x11a000-0x11afff: W DENIED, 0x11b000-0x11bfff: W DENIED, 0x11c000-0x11cfff: W DENIED, 0x11d000-0x11dfff: W DENIED, 0x11e000-0x11efff: W DENIED, 0x11f000-0x11ffff: W DENIED, 0x120000-0x120fff: W DENIED, 0x121000-0x121fff: W DENIED, 0x122000-0x122fff: W DENIED, 0x123000-0x123fff: W DENIED, 0x124000-0x124fff: W DENIED, 0x125000-0x125fff: W DENIED, 0x126000-0x126fff: W DENIED, 0x127000-0x127fff: W DENIED, 0x128000-0x128fff: W DENIED, 0x129000-0x129fff: W DENIED, 0x12a000-0x12afff: W DENIED, 0x12b000-0x12bfff: W DENIED, 0x12c000-0x12cfff: W DENIED, 0x12d000-0x12dfff: W DENIED, 0x12e000-0x12efff: W DENIED, 0x12f000-0x12ffff: W DENIED, 0x130000-0x130fff: W DENIED, 0x131000-0x131fff: W DENIED, 0x132000-0x132fff: W DENIED, 0x133000-0x133fff: W DENIED, 0x134000-0x134fff: W DENIED, 0x135000-0x135fff: W DENIED, 0x136000-0x136fff: W DENIED, 0x137000-0x137fff: W DENIED, 0x138000-0x138fff: W DENIED, 0x139000-0x139fff: W DENIED, 0x13a000-0x13afff: W DENIED, 0x13b000-0x13bfff: W DENIED, 0x13c000-0x13cfff: W DENIED, 0x13d000-0x13dfff: W DENIED, 0x13e000-0x13efff: W DENIED, 0x13f000-0x13ffff: W DENIED, 0x140000-0x140fff: W DENIED, 0x141000-0x141fff: W DENIED, 0x142000-0x142fff: W DENIED, 0x143000-0x143fff: W DENIED, 0x144000-0x144fff: W DENIED, 0x145000-0x145fff: W DENIED, 0x146000-0x146fff: W DENIED, 0x147000-0x147fff: W DENIED, 0x148000-0x148fff: W DENIED, 0x149000-0x149fff: W DENIED, 0x14a000-0x14afff: W DENIED, 0x14b000-0x14bfff: W DENIED, 0x14c000-0x14cfff: W DENIED, 0x14d000-0x14dfff: W DENIED, 0x14e000-0x14efff: W DENIED, 0x14f000-0x14ffff: W DENIED, 0x150000-0x150fff: W DENIED, 0x151000-0x151fff: W DENIED, 0x152000-0x152fff: W DENIED, 0x153000-0x153fff: W DENIED, 0x154000-0x154fff: W DENIED, 0x155000-0x155fff: W DENIED, 0x156000-0x156fff: W DENIED, 0x157000-0x157fff: W DENIED, 0x158000-0x158fff: W DENIED, 0x159000-0x159fff: W DENIED, 0x15a000-0x15afff: W DENIED, 0x15b000-0x15bfff: W DENIED, 0x15c000-0x15cfff: W DENIED, 0x15d000-0x15dfff: W DENIED, 0x15e000-0x15efff: W DENIED, 0x15f000-0x15ffff: W DENIED, 0x160000-0x160fff: W DENIED, 0x161000-0x161fff: W DENIED, 0x162000-0x162fff: W DENIED, 0x163000-0x163fff: W DENIED, 0x164000-0x164fff: W DENIED, 0x165000-0x165fff: W DENIED, 0x166000-0x166fff: W DENIED, 0x167000-0x167fff: W DENIED, 0x168000-0x168fff: W DENIED, 0x169000-0x169fff: W DENIED, 0x16a000-0x16afff: W DENIED, 0x16b000-0x16bfff: W DENIED, 0x16c000-0x16cfff: W DENIED, 0x16d000-0x16dfff: W DENIED, 0x16e000-0x16efff: W DENIED, 0x16f000-0x16ffff: W DENIED, 0x170000-0x170fff: W DENIED, 0x171000-0x171fff: W DENIED, 0x172000-0x172fff: W DENIED, 0x173000-0x173fff: W DENIED, 0x174000-0x174fff: W DENIED, 0x175000-0x175fff: W DENIED, 0x176000-0x176fff: W DENIED, 0x177000-0x177fff: W DENIED, 0x178000-0x178fff: W DENIED, 0x179000-0x179fff: W DENIED, 0x17a000-0x17afff: W DENIED, 0x17b000-0x17bfff: W DENIED, 0x17c000-0x17cfff: W DENIED, 0x17d000-0x17dfff: W DENIED, 0x17e000-0x17efff: W DENIED, 0x17f000-0x17ffff: W DENIED, 0x180000-0x180fff: W DENIED, 0x181000-0x181fff: W DENIED, 0x182000-0x182fff: W DENIED, 0x183000-0x183fff: W DENIED, 0x184000-0x184fff: W DENIED, 0x185000-0x185fff: W DENIED, 0x186000-0x186fff: W DENIED, 0x187000-0x187fff: W DENIED, 0x188000-0x188fff: W DENIED, 0x189000-0x189fff: W DENIED, 0x18a000-0x18afff: W DENIED, 0x18b000-0x18bfff: W DENIED, 0x18c000-0x18cfff: W DENIED, 0x18d000-0x18dfff: W DENIED, 0x18e000-0x18efff: W DENIED, 0x18f000-0x18ffff: W DENIED, 0x190000-0x190fff: W DENIED, 0x191000-0x191fff: W DENIED, 0x192000-0x192fff: W DENIED, 0x193000-0x193fff: W DENIED, 0x194000-0x194fff: W DENIED, 0x195000-0x195fff: W DENIED, 0x196000-0x196fff: W DENIED, 0x197000-0x197fff: W DENIED, 0x198000-0x198fff: W DENIED, 0x199000-0x199fff: W DENIED, 0x19a000-0x19afff: W DENIED, 0x19b000-0x19bfff: W DENIED, 0x9d0000-0x9d0fff: ETransaction error between offset 0x009d0000 and 0x009d0fff (= 0x009d0000 + 4095) ERASE_FAILED FAILED! Uh oh. Erase/write failed. Checking if anything changed. Reading current flash chip contents... 000000-0xffffff:R ignoring error when reading 0x0-0xffffff done. Good, writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. restoring chip status (0x60) Writing status register FAILED Restoring PCI config space for 00:1f:5 reg 0xdc Restoring PCI config space for 00:1f:5 reg 0xdc restore_power_management: Re-enabling power management. An error occurred flashing the Full ROM firmware. DO NOT REBOOT!

1 0

Reporting log
by Lac Onis 24 Dec '20

24 Dec '20

From a Lenovo Ideapad 3 15are05, on Ubuntu 20.04 As suggested, I report the following log. I'd be happy to have a suggestion on how to flash the Bios. Thank you! *$ sudo flashrom -r DZCN19WW.original.ROM* flashrom v1.2 on Linux 5.4.0-58-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Please select a programmer with the --programmer parameter. To choose the mainboard of this computer use 'internal'. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, atavia, it8212, ft2232_spi, serprog, buspirate_spi, dediprog, developerbox, rayer_spi, pony_spi, nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, satamv, linux_mtd, linux_spi, usbblaster_spi, pickit2_spi, ch341a_spi, digilent_spi, stlinkv3_spi. *$ sudo flashrom --programmer internal* flashrom v1.2 on Linux 5.4.0-58-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... FCH device found but SMBus revision 0x51 does not match known values. Please report this to flashrom(a)flashrom.org and include this log and the output of lspci -nnvx, thanks!. Could not determine chipset generation.PROBLEMS, continuing anyway ======================================================================== You seem to be running flashrom on an unknown laptop. Some internal buses have been disabled for safety reasons. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and https://flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.

3 6

homebrew board with Micron flash chip "MT25QL256"
by Stöferle, Bernd 22 Dec '20

22 Dec '20

Hi, on my board, the Micron flash chip "MT25QL256" works perfectly. Thanks. Mit freundlichen Grüßen / Kind regards [cid:Elbit_e39f88ed-f975-4016-9b2c-04c8064fcd0f11111111.png]<https://elbitsystems-de.com/> Bernd Stöferle | Software Entwicklung Elbit Systems Deutschland T +49 731 1553 270 Fax +49 731 1553 112 Email Bernd.Stoeferle(a)elbitsystems-de.com<mailto:Bernd.Stoeferle@elbitsystems-de.com><https://tfk-racoms.com/> Elbit Systems Deutschland GmbH & Co. KG Eberhard-Finckh-Strasse 55, 89075 Ulm, Germany Legal Domicile: Ulm Registration court: Ulm, HRA 3015 Personally liable partner: Elbit Systems Deutschland Verwaltungs GmbH Legal Domicile: Ulm Registration court: Ulm, HRB 4215 Managing Director: Thomas Nützel --------------------------------------------------------------------------------------------- Diese E-Mail könnte vertrauliche und/oder rechtlich geschützte Informationen enthalten. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser E-Mail sind nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. ---------------------------------------------------------------------------------------------

1 0

Unrecognized SMBus revision
by Jean-Paul Crespy 17 Dec '20

17 Dec '20

Hello, As indicated in error message (attached file "flashrom.log"), I transmit you the requested information. Best regards Jean-Paul Crespy

3 4

Fwd: Unrecognized SMBus revision
by Clay Daniels 17 Dec '20

17 Dec '20

--------- Forwarded message --------- From: Clay Daniels <clay.daniels.jr(a)gmail.com> Date: Thu, Dec 17, 2020 at 10:06 AM Subject: Re: [flashrom] Unrecognized SMBus revision To: Edward O'Callaghan (Code Review) <gerrit(a)coreboot.org> Please let me retract part of what I said, which is incorrect: "I do have one who has an 0x51 board with a 0x51 board which is the other email from/to Jean-Paul Crespy. The 0x51 was also listed in Rene Rebe's patch from the flashrom list of Oct 12." First , Jean-Paul Crespy, nor any other of those I know of, have an "0x51" board. This only appears in Rene Rebe's email of Oct 12, supposedly in reference to a friend's AMD Ryzen 4000 Mobile. I could not find a definite revision # for his friend's Ryzen 4000, but it is a relatively new machine and likely 0x61. See: https://mail.google.com/mail/u/0/?ogbl#label/coreboot%2Fflashrom/WhctKJWHzS… I sat down and put what data I had into a small file, and this is what I have: Clay Daniels <clay.daniels.jr(a)gmail.com> 0x61 X570 MSI Rene Rebe <rene(a)exactcode.com> 0x61 X570 Asus Julian Labus <julian(a)labus-online.de> 0x61 X570 Gigabyte AORUS madsys <madsys(a)gmail.com> 0x61 X570 ASUS Jean-Paul Crespy <jean-paul.crespy(a)laposte.net> 0x61 绅士无双 <hentaiwushuang(a)gmail.com> 0x61 X570 MSI romain <roms2000(a)free.fr> 0x61 B450 ASRockRack B450D4U-V1L Boggy <mrboggy(a)gmail.com> 0x59 X470 Asus Branko <brankob(a)s5tehnika.net> 0x59 X470 MSI Gergely Tomka <tomkatudor(a)gmail.com> 0x59 X370 ASRock I think Rene Rebe is mistaken, and I just blindly copied his work. Anyway, the upshot is that what you have done is entirely correct, and needs no further addition of any "0x51" board. Thanks again for all your good work, Clay Daniels

1 0

asrock x370
by Gergely Tomka 16 Dec '20

16 Dec '20

Hi, My computer said to me to send this output to you: ---8<-------- $ sudo flashrom --programmer internal flashrom v1.2 on Linux 5.8.0-31-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... FCH device found but SMBus revision 0x59 does not match known values. Please report this to flashrom(a)flashrom.org and include this log and the output of lspci -nnvx, thanks!. Could not determine chipset generation.PROBLEMS, continuing anyway No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. --8<--------- See the lspci output attached. Thanks, tg -- we do what we must because we can

3 2

reading is ok but writing fails
by Cédric Vuillet 11 Dec '20

11 Dec '20

Hi, thanks for working on flashrom which seems to be great! I tried to use it in order to flash an NVidia GTX780M to put it in a iMac 2010 which has graphic issue today. I tried to flash it using a CH341A module. I was able to save rom in a file using flashrom on MacOS X. But I have a problem trying to write a new rom on that card. This is the result I got... Do you know if I must change jumpers or something on my CH341A controller. Or do you think this can be a plug issue on the chip ? Tell me if you want a more verbose log maybe... Thanks à lot! Ced flashrom -p ch341a_spi -w ~/Downloads/780M_BR2.rom flashrom v1.2 on Darwin 19.6.0 (x86_64) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found PMC flash chip "Pm25LD020(C)" (256 kB, SPI) on ch341a_spi. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, Found=0x4e, failed byte count from 0x00000000-0x00000fff: 0xf85 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x4e, failed byte count from 0x00000000-0x00000fff: 0xf85 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x4e, failed byte count from 0x00000000-0x0000ffff: 0xf6c3 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. libusb: warning [darwin_transfer_status] transfer error: timed out cb_in: error: LIBUSB_TRANSFER_TIMED_OUT ch341a_spi_spi_send_command: Failed to read 4100 bytes libusb: warning [darwin_abort_transfers] aborting all transactions on interface 0 pipe 1 Verification impossible because read failed at 0x0 (len 0x40000) ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000000! Expected=0xff, Found=0x4e, failed byte count from 0x00000000-0x0003ffff: 0x27c8d ERASE FAILED! Reading current flash chip contents... libusb: warning [darwin_transfer_status] transfer error: timed out cb_in: error: LIBUSB_TRANSFER_TIMED_OUT ch341a_spi_spi_send_command: Failed to read 4100 bytes libusb: warning [darwin_abort_transfers] aborting all transactions on interface 0 pipe 1 Can't read anymore! Aborting. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Good, writing to the flash chip apparently didn't do anything. Please check the connections (especially those to write protection pins) between the programmer and the flash chip. If you think the error is caused by flashrom please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks!

2 1

flashrom support for AMD AM4 X470 chipset ?
by Branko 10 Dec '20

10 Dec '20

Hi, it has been quite some years since AM4 motherboards with X470 chipset were new, but still flashrom refuses to work with mine. With same response - that chipset is unrecognised. I've sent the data ( output of lspci, board data etc), but so far got no response. So I wonder, is there some fundamental problem with X470 chipset ? ( Ryzen R7 2700x on MSI X470 Gaming Plus).

1 0

Intel I211 NIC 8086:1539: reading/writing flash works for me
by seems.deviant＠gmail.com 08 Dec '20

08 Dec '20

I was able to change MAC address of my NIC. Required specifying `iomem=relaxed` to kernel cmdline. $ lspci -vnn ... 08:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03) Subsystem: Gigabyte Technology Co., Ltd Device [1458:e000] Flags: bus master, fast devsel, latency 0, IRQ 39 Memory at fcb00000 (32-bit, non-prefetchable) [size=128K] I/O ports at f000 [size=32] Memory at fcb20000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb $ sudo flashrom -pnicintel_eeprom -r 123 flashrom v1.2 on Linux 5.8.18-200.fc32.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Found Programmer flash chip "Opaque flash chip" (4 kB, Programmer- specific) on nicintel_eeprom. Reading flash... done. Reading is no problem. Writing operation reports 'Flash update failed' at the end, however changes apply to the flash. $ sudo flashrom -pnicintel_eeprom -w 123 flashrom v1.2 on Linux 5.8.18-200.fc32.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Found Programmer flash chip "Opaque flash chip" (4 kB, Programmer- specific) on nicintel_eeprom. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. Flash update failed

1 0

Found Atmel flash chip "AT25SF321" (4096 kB, SPI) on ch341a_spi.
by Mike Brown 07 Dec '20

07 Dec '20

I have tested both erase and write functionality on this chip and it is working properly. verified md5sum of the image I flashed as well as a read back afterwards. 0✓ xenoxaos racktop [ ~ ] $ sudo flashrom --programmer ch341a_spi -E flashrom v1.2-148-g976d0fc0 on Linux 5.9.1-arch1-1 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Atmel flash chip "AT25SF321" (4096 kB, SPI) on ch341a_spi. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Erasing and writing flash chip... Erase/write done. 0 ✓ xenoxaos racktop [ ~ ] $ sudo flashrom --programmer ch341a_spi -r shouldbeblank.bin flashrom v1.2-148-g976d0fc0 on Linux 5.9.1-arch1-1 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Atmel flash chip "AT25SF321" (4096 kB, SPI) on ch341a_spi. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done. 0 ✓ xenoxaos racktop [ ~ ] $ less shouldbeblank.bin 1 ✓ xenoxaos racktop [ ~ ] $ sudo flashrom --programmer ch341a_spi -w ./orbit_esp32.firmware.bin flashrom v1.2-148-g976d0fc0 on Linux 5.9.1-arch1-1 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Atmel flash chip "AT25SF321" (4096 kB, SPI) on ch341a_spi. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. 0 ✓ xenoxaos racktop [ ~ ] $ sudo flashrom --programmer ch341a_spi -r checkingafterwrite.bin flashrom v1.2-148-g976d0fc0 on Linux 5.9.1-arch1-1 (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Atmel flash chip "AT25SF321" (4096 kB, SPI) on ch341a_spi. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done. 0 ✓ xenoxaos racktop [ ~ ] $ md5sum checkingafterwrite.bin ./orbit_esp32.firmware.bin 7291decdb2d25c2bea7dea5eb87df460 checkingafterwrite.bin 7291decdb2d25c2bea7dea5eb87df460 ./orbit_esp32.firmware.bin 0 ✓ xenoxaos racktop [ ~ ]

2 1

chip information
by Thierry Smeekes 05 Dec '20

05 Dec '20

hello, here is the output your program requested me to send. greetings. flashrom v1.2 on Linux 5.9.0-kali2-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.4, GCC 9.2.1 20200224, little endian Command line (3 args): flashrom -VV -p ch341a_spi Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing ch341a_spi programmer Device revision is 3.0.4 The following protocols are supported: SPI. Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF021A, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25SF041, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25SF081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25SF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25SF321, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT25SL128A, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ESI ES25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ESI ES25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ESI ES25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25B128B/GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25LQ128C/GD25LQ128D, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25LQ40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25LQ64(B), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25LQ80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q127C/GD25Q128C, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q256D, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25VQ16C, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25VQ21B, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25VQ40C, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25VQ41B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for GigaDevice GD25VQ80C, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25LP064, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25LP128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25LP256, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25WP032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25WP064, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25WP128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ISSI IS25WP256, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX23L12854, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX23L1654, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX23L6454, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L12805D, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L25635F/MX25L25645G, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L6405D, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L6495F, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25R6435F, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U12835F, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U25635F, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U51245G, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX25U8032E, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix MX66L51235F/MX25L51245G, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q00A..1G, 131072 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q00A..3G, 131072 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q256..1E, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q256..3E, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q512..1G, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron/Numonyx/ST N25Q512..3G, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QL01G, 131072 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QU01G, 131072 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QL02G, 262144 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QU02G, 262144 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QU128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QL128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QL256, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QU256, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QL512, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Micron MT25QU512, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LQ016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LQ020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LQ032C, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LQ040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LQ080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0x20, id2 0x16 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0x20, id2 0x16 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x20, id2 0x16 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x20, id2 0x16 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x20, id2 0x16 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0x20, id2 0x16 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF020A, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF040B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST26VF016B(A), 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST26VF032B(A), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST SST26VF064B(A), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ST M95M02, 256 kB: probe_spi_st95: id1 0xff, id2 0xffff Probing for Sanyo LE25FU106B, 128 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FU206, 256 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FU206A, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FU406C/LE25U40CMC, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL127S-256kB, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL127S-64kB, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL128P......0, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL128P......1, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL129P......0, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL129P......1, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL256S......0, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Spansion S25FL512S, 65536 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q128.V..M, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q128.W, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q128.JW.DTR, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q256.V, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q256JV_M, 32768 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q40.V, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q40BW, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q40EW, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q80BW, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25Q80EW, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Zetta Device ZD25D20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Zetta Device ZD25D40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Unknown SFDP-capable chip, 0 kB: SFDP revision = 1.0 SFDP number of parameter headers is 2 (NPH = 1). SFDP parameter table header 0/1: ID 0x00, version 1.0 Length 36 B, Parameter Table Pointer 0x000030 Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 8192 kB. Block eraser 0: 2048 x 4096 B with opcode 0x20 Tried to add a duplicate block eraser: 2048 x 4096 B with opcode 0x20. Block eraser 1: 256 x 32768 B with opcode 0x52 Block eraser 2: 128 x 65536 B with opcode 0xd8 done. SFDP parameter table header 1/1: ID 0x20, version 1.0 Length 16 B, Parameter Table Pointer 0x000060 === SFDP has autodetected a flash chip which is not natively supported by flashrom yet. All standard operations (read, verify, erase and write) should work, but to support all possible features we need to add them manually. You can help us by mailing us the output of the following command to flashrom(a)flashrom.org: 'flashrom -VV [plus the -p/--programmer parameter]' Thanks for your help! === Found Unknown flash chip "SFDP-capable chip" (8192 kB, SPI) on ch341a_spi. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x7017 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x20, id2 0x16 Found Unknown flash chip "SFDP-capable chip" (8192 kB, SPI). No operations were specified.

1 0

bug report for AMD X570
by madsys 04 Dec '20

04 Dec '20

hey, I just tried to flash BIOS on my ASUS x570 mainboard, but an error was reported. Attachment are error logs. Kind regards, madsys

1 0

Clevo BIOS
by Juno Computers UK 04 Dec '20

04 Dec '20

Hi, My name is Giovanni and I'm the founder of Juno Computers. For the last few days I've been trying to get flashrom working on two of our Clevo laptops but I am having a hard time detecting the chipset. I have attached a log and was wondering if someone could guide me. Maybe I am missing a module which is why it can't read my BIOS chipset. Looking forward to hearing from your team. Best regards, Giovanni Caligaris Juno Computers UK P: +44 (0) 2072 079590 (tel:+44%20(0)%202072%20079590) W: https://junocomputers.com/uk

1 0

flashrom FAILED
by Bálint Boldizsár Varga 01 Dec '20

01 Dec '20

Dear Team! I got an error while librebooting my thinkpad x200. The error message was: Verifying flash... FAILED at 0x0003a709! Expected=0xb8, Found=0x80, failed byte count from 0x00000000-0x007fffff: 0x124fYour flash chip is in an unknown state. I used this command: ./flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=128 -w /home/pi/x200/x200_8mb_deqwertz_vesafb.rom -V -c MX25L6405D I followed the instructions of this reddit post: https://www.reddit.com/r/libreboot/comments/7dajn6/x200_libreboot_tutorial_… Should I retry the flashrom? Thank you in advance! Balint

2 1

Upcoming virtual OSFC 2020
by Philipp Deppenwiese 30 Nov '20

30 Nov '20

Hello people, This is a last reminder on the upcoming OSFC 2020 (www.osfc.io) which will start tomorrow noon CET. If you are interested in attending the conference, please get your tickets via https://hopin.com/events/osfc-2020 Best regards, Philipp

1 0

(no subject)
by It Bd44 28 Nov '20

28 Nov '20

VERY interest software EasyJTAG SPI Flasher but news more update need more model support need no have new bis ic model support no have loved you EasyJTAG SPI Flasher tool, always update need new bios ic and universal ic support better and try to chk apple iCloud unlock setting-example, MacBook, mac bios ic s/n need change-so your software instant bios read and instant sn exchange put new sn and writh, and work has done it is best tips and you make like this your barnd more raking going 100% all this best - i have more idea after I tell you by brother

1 0

bios report
by It Bd44 28 Nov '20

28 Nov '20

hi sir, EasyJTAG SPI Flasher plb PLB 1-auto is not read bios ic Munnelly need selected and sam bios ic no have a model and not working auto identify the device,

1 1

Unsupported nor flash Adesto Technologies AT25SF128A-SHB-T
by Sebastian 28 Nov '20

28 Nov '20

Hi, you did really an excellent work! I send you the output of flashrom -VV for the above mentioned chip. Datasheet is here. <https://www.mouser.de/datasheet/2/590/adesto_technologies_adet-s-a000794721…> I did some edits in the flashchips.h / .c not sure whether those are correct. I looked up the values in the datasheet. I did only some basic reads and writes, no detailed testing. I have not uploaded anything to git. Here the edits. #define ATMEL_AT25SF128A 0x8901 { .vendor = "Atmel", .name = "AT25SF161", .bustype = BUS_SPI, .manufacture_id = ATMEL_ID, .model_id = ATMEL_AT25SF161, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2048 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_plain, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2500, 3600}, }, Regards sudo flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1 -VV flashrom on Linux 5.4.51+ (armv6l) flashrom is free software, get the source code at https://flashrom.org <https://flashrom.org/> flashrom was built with libpci 3.5.2, GCC 8.2.0, little endian Command line (3 args): flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=1 -VV Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing linux_spi programmer Using device /dev/spidev0.0 Using 1 kHz clock The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DL081, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DL161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for ESMT F25L32PA, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for ESI ES25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for ESI ES25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for ESI ES25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25LQ40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25LQ80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25LQ64(B), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25LQ128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25Q128C, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25VQ21B, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25VQ40C, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25VQ41B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25VQ80C, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for GigaDevice GD25VQ16C, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX23L1654, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX23L3254, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX23L6454, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX23L12854, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L3273E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L6405D, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L12805D, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25U12835F, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix MX25L6495F, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LQ020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LQ040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LQ080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LQ016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LQ032C, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FU406C/LE25U40CMC, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL132K, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL164K, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL127S-64kB, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL127S-256kB, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL128P......0, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL128P......1, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL129P......0, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Spansion S25FL129P......1, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0x1f, id2 0x17 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x17, id2 0x17 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0x1f, id2 0x17 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0x1f, id2 0x17 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x1f, id2 0x17 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x1f, id2 0x17 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x1f, id2 0x17 Probing for SST SST25WF020A, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF040B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST SST25WF080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q40.V, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25Q128.W, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Unknown SFDP-capable chip, 0 kB: SFDP revision = 1.0 SFDP number of parameter headers is 2 (NPH = 1). SFDP parameter table header 0/1: ID 0x00, version 1.0 Length 36 B, Parameter Table Pointer 0x000030 Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 16384 kB. Block eraser 0: 4096 x 4096 B with opcode 0x20 Tried to add a duplicate block eraser: 4096 x 4096 B with opcode 0x20. Block eraser 1: 512 x 32768 B with opcode 0x52 Block eraser 2: 256 x 65536 B with opcode 0xd8 done. SFDP parameter table header 1/1: ID 0x1f, version 1.0 Length 12 B, Parameter Table Pointer 0x000060 === SFDP has autodetected a flash chip which is not natively supported by flashrom yet. All standard operations (read, verify, erase and write) should work, but to support all possible features we need to add them manually. You can help us by mailing us the output of the following command to flashrom(a)flashrom.org: 'flashrom -VV [plus the -p/--programmer parameter]' Thanks for your help! === Found Unknown flash chip "SFDP-capable chip" (16384 kB, SPI) on linux_spi. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x8901 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x1f, id2 0x17 Found Unknown flash chip "SFDP-capable chip" (16384 kB, SPI). No operations were specified.

1 0

Success report: Supermicro X11SSH-TF / Intel C236
by Martin Lucina 27 Nov '20

27 Nov '20

Hi, I'd like to report success with using flashrom 1.2 to flash a Supermicro X11SSH-TF (Intel C236 chipset). The hardware had already been flashed with Coreboot using an external programmer, and I'm trying to ascertain if flashrom can be used to flash updates to it. I'm attaching full logs, apologies for the slightly crufty format, these are from a serial console. There are a couple of things I'd like to check with you before I decide that this is safe to use in the wild: 1. Flashrom complains that: Warning: Setting Bios Control at 0xdc from 0x8b to 0x89 failed. New value is 0x8b. SPI Configuration is locked down. 2. After a cold boot, the hash I read back from the flash does not match what I wrote to it. If I do a -r immediately after a -w, it does match. See the 2nd log attached for the mismatch. Does (1) matter in any way? For (2) I'm assuming ME/Coreboot/something is locking down regions of the flash, and that lock only gets removed when writing? Thanks & keep up the good work, Martin

1 0

flashrom 1.2
by Boggy 21 Nov '20

21 Nov '20

Hi is any of this useful? using x470 Hero vii Asus motherboard flashrom -p internal -r BACKUP.ROM Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... FCH device found but SMBus revision 0x59 does not match known values. Please report this to flashrom(a)flashrom.org and include this log and the output of lspci -nnvx, thanks!. Could not determine chipset generation.PROBLEMS, continuing anyway No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. =========== lspci -nnvx SMBus ===== 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 59) Subsystem: ASUSTeK Computer Inc. FCH SMBus Controller [1043:8747] Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus Kernel modules: i2c_piix4, sp5100_tco 00: 22 10 0b 79 03 04 20 02 59 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 47 87 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1 0

Fail on CHIP "W25Q256.V"
by Igor Omelchenko 21 Nov '20

21 Nov '20

Hello! Tried to flash BIOS on "W25Q256.V" chip, got below errors: (Tried with 24-45k spispeed. tried with -n and without -n) Thanks for your amazing work! squid@squid:~$ sudo flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=24000 -n -w /squid/Squid/Files/SES5_000000_2020WW45.1.01.bin flashrom on Linux 4.14.108-ti-r137 (armv7l) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found Winbond flash chip "W25Q256.V" (32768 kB, SPI) on linux_spi. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from 0x00000000-0x00000fff: 0xffc ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from 0x00000000-0x00007fff: 0x7fee ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from 0x00000000-0x0000ffff: 0xffde ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from 0x00000000-0x01ffffff: 0x1ffbf90 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000002! Expected=0xff, Found=0x7f, failed byte count from 0x00000000-0x01ffffff: 0x1ffbe3a ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! -- *Omelchenko Igor* *0543-066-855*

2 2

FAILED: <Asrock Z390 Phantom Gaming-ITX/ac>
by Iago Barreto 20 Nov '20

20 Nov '20

Hi, need some help: tried to flash modded bios through flashrom on Linux Mint and got a fail... Thanks in advance, Iago Barreto

1 0

using flashrom on supermicro board X11SSZ-TLN4F
by Kurt Jaeger 18 Nov '20

18 Nov '20

Hi! We've tried to install a new BIOS for a X11SSZ-TLN4F mainboard from supermicro. It can not be flashed using flashrom -- and says I should send you a -V output. Here's the -V: # flashrom -V -w X11SSZ0.602 -p internal flashrom v1.2 on FreeBSD 12.2-RELEASE (amd64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.7.0, LLVM Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2), little endian Command line (5 args): flashrom -V -w X11SSZ0.602 -p internal Using clock_gettime for delay loops (clk_id: 4, resolution: 1ns). Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Main Server Chassis" DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "Super Server" DMI string system-version: "0123456789" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "X11SSZ-TLN4F" DMI string baseboard-version: "1.10" Found chipset "Intel C236" with PCI ID 8086:a149. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... pcilib: This access method is not supported. -- MfG/Best regards, Kurt Jaeger Now what ? Dr.-Ing. Nepustil & Co. GmbH fon +49 7123 93006-0 pi(a)nepustil.net Rathausstr. 3 mob +49 171 3101372 72658 Bempflingen

1 0

Info for W25Q16BVSSIG
by Berké Durak 16 Nov '20

16 Nov '20

Hi, This is the flashrom -VV output for the W25Q16BVSSIG chip as found on the Olimex iCE40HX8K-EVB evaluation board. From the Debian flashrom 1.0-1 armhf on the SPI pins of a Beaglebone Black, with the command : flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=10000 -VV >flashrom.info -- Berké Durak, Ph.D ExH R&D

2 2

Question about chipset "Intel C60x/X79"
by dac9＠emailportal.ch 15 Nov '20

15 Nov '20

Hello guys Thanks for the great work on flashrom. I run flashrom with the "internal" programmer on HP-z420 and I've get the following message: ********************************************************************** Found chipset "Intel C60x/X79" with PCI ID 8086:1d41. ... Found Winbond flash chip "W25Q128.V" (16384 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). ********************************************************************** For more information please check the log-file in annex. Could you please say me if I really have no chance to replace this BIOS with flashrom and coreboot? Or maybe I can use an external programmer with a SOIC-CLIP? Thanks in advance Best regards Dario

1 0

Untested chipset "Intel Q67"
by dac9＠emailportal.ch 15 Nov '20

15 Nov '20

Hello guys Thanks for the great work on flashrom. I use it recently and I've get the following message: ********************************************************* Found chipset "Intel Q67" with PCI ID 8086:1c4e. This chipset is marked as untested. ... please email a report to flashrom(a)flashrom.org including a verbose (-V) log. ********************************************************* And so I did. Please check the log-file in annex. Best regards Dario

1 0

Supported mainboard report
by theonlykw259 14 Nov '20

14 Nov '20

Hello, I wanted to report that the ASRock B450M-HDV R4.0 is supported, I was successfully able to dump the firmware, as well as write modified firmware back to it.

1 0

failed flashing ROM on a Dell E7270
by Richard Horsch 10 Nov '20

10 Nov '20

Dear all, I miss-flashed my BIOS on a Dell Latitude E7270 somehow. So I tried to reflash the chip with flashrom, but it faild. I was asked to report this to you. The terminal tells me following: " flashrom v1.2 on Linux 5.4.0-52-generic (x86_64) Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found GigaDevice flash chip "GD25Q127C/GD25Q128C" (16384 kB, SPI) on ch341a_spi. Reading old flash chip contents... done. Erasing and writing flash chip... FAILED at 0x00f5d000! Expected=0xff, Found=0x40, failed byte count from 0x00f5d000-0x00f5dfff: 0x1000 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. FAILED at 0x00000010! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: 0x4732 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Erase/write done. Verifying flash... FAILED at 0x0008b500! Expected=0xda, Found=0xff, failed byte count from 0x00000000-0x00ffffff: 0xf0137 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! " Is there anything, what could be done further? Thanks and kind regards, Richard -- Richard Horsch Christian-Steiner-Str. 9 63762 Großostheim Tel.: +49 6026 949 3820 Mob.: +49 179 144 8160 Fax.: +49 6026 949 3821

2 1

Successful Flashrom Install - Thanks to all!
by Clay Daniels 09 Nov '20

09 Nov '20

All the pieces finally came together. I made a fresh install of Ubuntu, installed all the needed tools. cloned flashrom, modified sb600spi.c per Rene's patch to include my AMD X570 "0x61" spi, did a make install, and it works! root@clay-MS-7C37:~# flashrom -p internal flashrom v1.2-135-g07edbb9-dirty on Linux 5.8.0-26-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "AMD FP4". Enabling flash write... Warning: spireadmode not set, leaving spireadmode unchanged.Warning: spispeed not set, leaving spispeed unchanged.OK. Found Winbond flash chip "W25Q256.W" (32768 kB, SPI) mapped at physical address 0x00000000fe000000. No operations were specified. root@clay-MS-7C37:~# Thanks to everyone, Clay (Boot_Dawg)

2 2

BIOS update for Dell Optiplex 7010
by D H 07 Nov '20

07 Nov '20

Hello, Below is the output I got when trying to update my BIOS. I use MX Linux, I don't have Windows. I wonder whether an update is possible at all...? Thanks for your help, much appreciated. Best. Rob flashrom was built with libpci 3.5.2, GCC 8.2.0, little endian Command line (3 args): flashrom --programmer internal -V Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Dell Inc." DMI string system-product-name: "OptiPlex 7010" DMI string system-version: "01" DMI string baseboard-manufacturer: "Dell Inc." DMI string baseboard-product-name: "0773VG" DMI string baseboard-version: "A00" Found chipset "Intel Q77" with PCI ID 8086:1e47. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000 /dev/mem mmap failed: Operation not permitted FAILED! FATAL ERROR! Error: Programmer initialization failed.

1 0

Bios Update on Legacy Dell Server
by Robert M Peacock 06 Nov '20

06 Nov '20

Hi, Trying to update BIOS. I have Linux Mint running on a Dell PE SE430 server (c 2006). Tried a number of options provided by Dell. None of them have worked. FreeDOS didn't work. System garbled when grub tried to load it (via usb and dvd, legacy and usb versions). Chipset is Intel e7530 and current processor is Pentium D 2.8 ghz, which I hope to update shortly. Any help would be appreciated. Cheers, Robert

1 0

Use probot repo-lockdown on GitHub Mirror
by septs 04 Nov '20

04 Nov '20

see https://probot.github.io/apps/repo-lockdown/ guide users to use your desired method

1 0

Re: Attempt to install flashrom from git
by Clay Daniels 31 Oct '20

31 Oct '20

By the way, once I discovered the basic path to install flashrom from git, it works for me on Fedora too, in addition to Ubuntu. One more question: Which flavor of Linux works the best for flashrom/coreboot? Clay

1 0

Wiki Edit Access
by henry_wolfe＠openmail.cc 31 Oct '20

31 Oct '20

Hello. I would like an account on the wiki. I was going to edit the flashrom setup page on the bbb, and reference libreboot's documentation somewhere, as they have more up to date guides. Though flashrom's bbb guide is a good place to have links, and an older reference. Thanks, ------------------------------------------------- This free account was provided by VFEmail.net - report spam to abuse(a)vfemail.net ONLY AT VFEmail! - Use our Metadata Mitigator to keep your email out of the NSA's hands! $24.95 ONETIME Lifetime accounts with Privacy Features! 15GB disk! No bandwidth quotas! Commercial and Bulk Mail Options!

2 1

One build system to rule them all
by Patrick Georgi 31 Oct '20

31 Oct '20

Hi everybody, I just pushed https://review.coreboot.org/c/flashrom/+/46875 for review which replaces the make based build process with a call to use meson instead. The rationale is that the project is too small to warrant having two build systems. There are likely reasons left to use make (e.g. build configurations not yet supported by meson), so please consider this mainly an opportunity to discuss where flashrom's build process is headed, a warning that make _may_ be on the way out and a call to action to improve the meson build system to the point where it covers all build configurations. Comments, thoughts, counter proposals, patches welcome! Patrick -- Google Germany GmbH, ABC-Str. 19, 20354 Hamburg Registergericht und -nummer: Hamburg, HRB 86891, Sitz der Gesellschaft: Hamburg Geschäftsführer: Paul Manicle, Halimah DeLaine Prado

7 13

Attempt to install flashrom from git
by Clay Daniels 31 Oct '20

31 Oct '20

*I used this procedure in Ubuntu:* *sudo apt-get install -y bison build-essential curl flex git gnat libncurses5-dev m4 zlib1g-devgit clone https://github.com/flashrom/flashrom.git <https://github.com/flashrom/flashrom.git>Cloning into 'flashrom'...remote: Enumerating objects: 80, done.remote: Counting objects: 100% (80/80), done.remote: Compressing objects: 100% (58/58), done.remote: Total 11610 (delta 39), reused 52 (delta 22), pack-reused 11530Receiving objects: 100% (11610/11610), 4.07 MiB | 19.58 MiB/s, done.Resolving deltas: 100% (8812/8812), done.clay@clay-MS-7C37:~$ ls -alcd flashromclay@clay-MS-7C37:~/flashrom$ sudo make install...cc -MMD -Os -Wall -Wextra -Wno-unused-parameter -Wshadow -Wmissing-prototypes -Wwrite-strings -Werror -I/usr/include/libusb-1.0 -D'CONFIG_DEFAULT_PROGRAMMER=PROGRAMMER_INVALID' -D'CONFIG_DEFAULT_PROGRAMMER_ARGS="''"' -D'CONFIG_INTERNAL=1' -D'CONFIG_INTERNAL_DMI=1' -D'CONFIG_ENE_LPC=1' -D'CONFIG_MEC1308=1' -D'CONFIG_SERPROG=1' -D'CONFIG_RAYER_SPI=1' -D'CONFIG_RAIDEN=1' -D'CONFIG_PONY_SPI=1' -D'CONFIG_BITBANG_SPI=1' -D'CONFIG_NIC3COM=1' -D'CONFIG_GFXNVIDIA=1' -D'CONFIG_SATASII=1' -D'CONFIG_ATAVIA=1' -D'CONFIG_IT8212=1' -D'CONFIG_PICKIT2_SPI=1' -D'CONFIG_STLINKV3_SPI=1' -D'CONFIG_DUMMY=1' -D'CONFIG_DRKAISER=1' -D'CONFIG_NICREALTEK=1' -D'CONFIG_NICINTEL=1' -D'CONFIG_NICINTEL_SPI=1' -D'CONFIG_NICINTEL_EEPROM=1' -D'CONFIG_OGP_SPI=1' -D'CONFIG_BUSPIRATE_SPI=1' -D'CONFIG_DEDIPROG=1' -D'CONFIG_DEVELOPERBOX_SPI=1' -D'CONFIG_SATAMV=1' -D'CONFIG_LINUX_MTD=1' -D'CONFIG_LINUX_SPI=1' -D'CONFIG_CH341A_SPI=1' -D'CONFIG_DIGILENT_SPI=1' -D'CONFIG_I2C_SUPPORT=1' -D'NEED_PCI=1' -D'NEED_RAW_ACCESS=1' -D'NEED_LIBUSB1=1' -D'HAVE_UTSNAME=1' -D'HAVE_CLOCK_GETTIME=1' -D'FLASHROM_VERSION="v1.2-131-g74fd030"' -o chipset_enable.o -c chipset_enable.cIn file included from chipset_enable.c:36:hwaccess.h:34:10: fatal error: pci/pci.h: No such file or directory 34 | #include <pci/pci.h> | ^~~~~~~~~~~compilation terminated.make: *** [Makefile:1271: chipset_enable.o] Error 1clay@clay-MS-7C37:~/flashrom$* *Looking at https://review.coreboot.org/cgit/flashrom.git/tree/ <https://review.coreboot.org/cgit/flashrom.git/tree/> * *I don't find a pci.h file either. Any suggestions?* Clay

2 3

Erase failed on W25Q128.V
by Steffen Müller 30 Oct '20

30 Oct '20

After successfully reading from W25Q128FV, I wanted to write data back. But I get the error "ERASE FAILED!". Is there something I can do to make writing successful? The chip is located on the mainboard of an HP Elitebook notebook. The pins CS, DO, GND, VCC, CLK and DI are connected to a Raspberry Pi. pi@raspberrypi:~ $ flashrom -c "W25Q128.V" -w /home/pi/Desktop/bios.bin -VVV -p linux_spi:dev=/dev/spidev0.0,spispeed=16000 flashrom on Linux 5.4.51+ (armv6l) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.5.2, GCC 8.2.0, little endian Command line (7 args): flashrom -c W25Q128.V -w /home/pi/Desktop/bios.bin -VVV -p linux_spi:dev=/dev/spidev0.0,spispeed=16000 Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing linux_spi programmer Using device /dev/spidev0.0 Using 16000 kHz clock The following protocols are supported: SPI. Probing for Winbond W25Q128.V, 16384 kB: programmer_map_flash_region: mapping W25Q128.V from 0xff000000 to 0x00000000 RDID returned 0xef 0x40 0x18. probe_spi_rdid_generic: id1 0xef, id2 0x4018 Found Winbond flash chip "W25Q128.V" (16384 kB, SPI) on linux_spi. Chip status register is 0xfc. programmer_unmap_flash_region: unmapped 0x00000000 This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). programmer_map_flash_region: mapping W25Q128.V from 0xff000000 to 0x00000000 Some block protection in effect, disabling... Block protection could not be disabled! Chip status register is 0xfc. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00000fff: 0xffc ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: 0x8000 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0x10000 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0xffffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00ffffff: 0xffffd5 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0xffffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00ffffff: 0xfffd3e ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 5... not defined. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! programmer_unmap_flash_region: unmapped 0x00000000

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom