- flashrom - mail.coreboot.org

[PATCH] ichspi reprogram_opcode_on_the_fly return code fix
by Carl-Daniel Hailfinger 06 May '12

06 May '12

Fix ICH SPI reprogram_opcode_on_the_fly return code. Helpful for SFDP debugging. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-sfdp_read_dummy_reduce_param_chunksize/ichspi.c =================================================================== --- flashrom-ichspi_invalid_length_consistent/ichspi.c (Revision 1528) +++ flashrom-ichspi_invalid_length_consistent/ichspi.c (Arbeitskopie) @@ -416,7 +416,10 @@ msg_pdbg ("on-the-fly OPCODE (0x%02X) re-programmed, op-pos=%d\n", opcode, oppos); return oppos; } - return -1; + /* This case only happens if the writecnt/readcnt combination is + * impossible to achieve on ICH SPI. + */ + return SPI_INVALID_LENGTH; } static int find_opcode(OPCODES *op, uint8_t opcode) @@ -1001,7 +1004,11 @@ if (opcode_index == -1) { if (!ichspi_lock) opcode_index = reprogram_opcode_on_the_fly(cmd, writecnt, readcnt); - if (opcode_index == -1) { + if (opcode_index == SPI_INVALID_LENGTH) { + msg_pdbg("OPCODE 0x%02x has unsupported length, will " + "not execute.\n", cmd); + return SPI_INVALID_LENGTH; + } else if (opcode_index == -1) { msg_pdbg("Invalid OPCODE 0x%02x, will not execute.\n", cmd); return SPI_INVALID_OPCODE; -- http://www.hailfinger.org/

2 3

Winbond W39V040A seems working
by István Rétallér 06 May '12

06 May '12

Hi, it seems I found a working chip with UNTESTED status. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xda, id2 0x3d Found chip "Winbond W39V040A" (512 KB, LPC) at physical address 0xfff80000. It was checked in an old NF-7 Abit motherboard as follows: sudo flashrom -Vr /tmp/backup.bin The file is attached and seems valid. Some more info about the board: *-core description: Motherboard product: NF7-S/NF7,NF7-V (nVidia-nForce2) vendor: http://www.abit.com.tw/ physical id: 0 version: 2.X,1.0 *-firmware description: BIOS vendor: Phoenix Technologies, LTD physical id: 0 version: 6.00 PG date: 08/19/2004 size: 128KiB capacity: 448KiB I am ready to try writing as well, but cannot Google appropriate binarí bios :( István A non-text attachment has been stripped: "backup.bin" is at http://paste.flashrom.org/view.php?id=1168

3 6

Re: [flashrom] Test report Medion MD5000 V1.2 (MSI MS-6701) - Chip not detected
by Stefan Tauner 06 May '12

06 May '12

On Mon, 30 Apr 2012 19:16:41 +0200 Gurken Papst <gurken.papst(a)gmail.com> wrote: > Winbond W49F002UP12B is not detected on MSI MS-6701 (Branded as Medion > MD5000 V1.2) with SiS 648/Winbond W83697HF. > > […] Thanks! As written in the other thread this will hopefully be supported by a generic winbond patch, so i would rather just ignore the issue until then. if you *need* to update earlier i can create a separate patch that enables just this board. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[commit] r1531 - trunk
by repository service 06 May '12

06 May '12

Author: stefanct Date: Sun May 6 17:11:26 2012 New Revision: 1531 URL: http://flashrom.org/trac/flashrom/changeset/1531 Log: Refine reprogram_opcode_on_the_fly to indicate wrong readcnt/writecnt combinations. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ichspi.c Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Sat May 5 22:53:59 2012 (r1530) +++ trunk/ichspi.c Sun May 6 17:11:26 2012 (r1531) @@ -405,18 +405,16 @@ spi_type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; else if (writecnt == 4) // and readcnt is > 0 spi_type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - // else we have an invalid case, will be handled below + else // we have an invalid case + return SPI_INVALID_LENGTH; } - if (spi_type <= 3) { - int oppos=2; // use original JEDEC_BE_D8 offset - curopcodes->opcode[oppos].opcode = opcode; - curopcodes->opcode[oppos].spi_type = spi_type; - program_opcodes(curopcodes, 0); - oppos = find_opcode(curopcodes, opcode); - msg_pdbg ("on-the-fly OPCODE (0x%02X) re-programmed, op-pos=%d\n", opcode, oppos); - return oppos; - } - return -1; + int oppos = 2; // use original JEDEC_BE_D8 offset + curopcodes->opcode[oppos].opcode = opcode; + curopcodes->opcode[oppos].spi_type = spi_type; + program_opcodes(curopcodes, 0); + oppos = find_opcode(curopcodes, opcode); + msg_pdbg ("on-the-fly OPCODE (0x%02X) re-programmed, op-pos=%d\n", opcode, oppos); + return oppos; } static int find_opcode(OPCODES *op, uint8_t opcode) @@ -1001,7 +999,10 @@ if (opcode_index == -1) { if (!ichspi_lock) opcode_index = reprogram_opcode_on_the_fly(cmd, writecnt, readcnt); - if (opcode_index == -1) { + if (opcode_index == SPI_INVALID_LENGTH) { + msg_pdbg("OPCODE 0x%02x has unsupported length, will not execute.\n", cmd); + return SPI_INVALID_LENGTH; + } else if (opcode_index == -1) { msg_pdbg("Invalid OPCODE 0x%02x, will not execute.\n", cmd); return SPI_INVALID_OPCODE;

1 0

Dell Vostro 3700 - flashrom report
by Paweł Drewniak 06 May '12

06 May '12

Hi, similar error to Thinkpad X1 - fails on reading. Cheers, Paweł --- jadwiga-laptop flashrom-0.9.5.2 # ./flashrom -V -p internal:laptop=force_I_want_a_brick -r /tmp/bios.bin flashrom v0.9.5.2-r1515 on Linux 3.0.6-gentoo (x86_64), built with libpci 3.1.7, GCC 4.5.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1192M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 998 us, 10000 myus = 10098 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Dell Inc." DMI string system-product-name: "Vostro 3700" DMI string system-version: "Not Specified" DMI string baseboard-manufacturer: "Dell Inc." DMI string baseboard-product-name: "07VWR8" DMI string baseboard-version: "A00 " DMI string chassis-type: "Portable" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "Intel HM57" with PCI ID 8086:3b0b. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8 Root Complex Register Block address = 0xfed1c000 GCS = 0xc60: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00001000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x03ff0180 FREG1: BIOS region (0x00180000-0x003fffff) is read-write. 0x5C: 0x017f0001 FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf80000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00000000 (LVSCC) LVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000. Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25LF040A, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2016 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x15 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xb4, id2 0x57, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xb4, id2 0x57, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xb4, id2 0x57, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xc4, id2 0x10, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xe6, id2 0xb8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xb4, id2 0x57, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xe6, id2 0xb8, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xb4, id2 0x57, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Macronix flash chip "MX25L3205" (4096 kB, SPI). Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 Running OPCODE 0x03 failed at address 0x001000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x7f45ec7778a0 Restoring MMIO space at 0x7f45ec77789c Restoring MMIO space at 0x7f45ec777898 Restoring MMIO space at 0x7f45ec777896 Restoring MMIO space at 0x7f45ec777894 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Confirmed working motherboard
by Gary 06 May '12

06 May '12

FYI The Asus P8P67 Pro B3 Rev. flashes properly. It's not on your list so I thought I would let you know. I recently updated my BIOS to 3207 which really sucked and messed up a lot of uefi features. I mean bad. No way to downgrade via Asus. Downgrading 3207 back to 2303 worked without any problems. Your software is a life saver! Some info: flashrom v0.9.5.1-r1508 on Linux 3.4.0-rc5-ger (x86_64), built with libpci 3.1.7, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel P67". Enabling flash write... OK. Found Macronix flash chip "MX25L3205" (4096 kB, SPI) at physical address 0xffc00000.

2 1

Re: [flashrom] Flashrom report
by Stefan Tauner 06 May '12

06 May '12

On Tue, 24 Apr 2012 22:29:49 +0100 Paweł Drewniak <czajernia(a)gmail.com> wrote: > Hi, as requested by the program, a report for the read below: > […] Hello Paweł, thanks for your report! I have added the board to our list of (un)supported boards (with an appropriate note) and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 4

Re: [flashrom] Found chipset "NVIDIA MCP65" with PCI ID 10de:0441.
by Stefan Tauner 06 May '12

06 May '12

On Wed, 2 May 2012 14:32:23 +0300 Väinö Kareinen <tzihad(a)gmail.com> wrote: > Hi, > > I send This verbose output from flashing my bios as requested in flashrom's > output. Hello and thanks for the verbose logs. Unfortunately the board (K9N Neo V2) has already been tested by someone else as noted on http://flashrom.org/Supported_hardware -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

SiS 748 on a Foxconn 748K7AA-ERS works
by Timothy Ace 06 May '12

06 May '12

SiS 748 on a Foxconn 748K7AA-ERS flashes properly.

2 1

Log for palit n61s v2.0 on a MCP61 for read and write operations
by user 06 May '12

06 May '12

Log for palit n61s v2.0 on a MCP61 for read and write operations

2 1

unsupported main board?
by AW 06 May '12

06 May '12

Hi! I tried to write something fancy into those DMI lines (they currently say "to be filled by O.E.M.")... but flashrom doesnt seem to support my main board (verbose output is attached)... is there a trick to change those lines? thx. Bye Arne

2 1

flashrom -V
by William Roberts 06 May '12

06 May '12

MSI K9N2 SLI Platinum NVIDIA nForce 750a Chipset AMD Phenom flashrom v0.9.5.2-r1517 on Linux 3.2.0-24-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 751M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 979 us, 10000 myus = 9809 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7374" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "MS-7374" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP78S" with PCI ID 10de:075d. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0752 at 00:01:1 MCP SPI BAR is at 0xf8d80000 Mapping NVIDIA MCP6x SPI at 0xf8d80000, unaligned size 0x544. SPI control is 0xc012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Found Macronix flash chip "MX25L8005" (1024 kB, SPI). No operations were specified.

1 0

Re: [flashrom] [PATCH 1/1] Add manpage entry for pony_spi
by Carl-Daniel Hailfinger 05 May '12

05 May '12

Am 01.05.2012 01:28 schrieb Michael Karcher: > Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Thanks for the documentation patch. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1530 - trunk
by repository service 05 May '12

05 May '12

Author: mkarcher Date: Sat May 5 22:53:59 2012 New Revision: 1530 URL: http://flashrom.org/trac/flashrom/changeset/1530 Log: Add manpage entry for pony_spi Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashrom.8 Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Sat May 5 22:43:42 2012 (r1529) +++ trunk/flashrom.8 Sat May 5 22:53:59 2012 (r1530) @@ -201,6 +201,9 @@ .BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport " or Xilinx DLC5 compatible cable) .sp +.BR "* pony_spi" " (for SPI flash ROMs attached to a SI-Prog serial port " +bitbanging adapter) +.sp .BR "* nicintel_spi" " (for SPI flash ROMs on Intel Gigabit network cards)" .sp .BR "* ogp_spi" " (for SPI flash ROMs on Open Graphics Project graphics card)" @@ -614,6 +617,26 @@ The schematic of the Xilinx DLC 5 was published at .BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " . .SS +.BR "pony_spi " programmer +The serial port (like /dev/ttyS0, /dev/ttyUSB0 on Linux or COM3 on windows) is +specified using the mandatory +.B dev +parameter. The adapter type is selectable between SI-Prog (used for +SPI devices with PonyProg 2000) or a custom made serial bitbanging programmer +named "serbang". The optional +.B type +parameter accepts the values "si_prog" (default) or "serbang". +.sp +Information about the SI-Prog adapter can be found at +.BR "http://www.lancos.com/siprogsch.html " . +.sp +An example call to flashrom is +.sp +.B " flashrom \-p pony_spi:dev=/dev/ttyS0,type=serbang" +.sp +Please note that while USB-to-serial adapters work under certain circumstances, +this slows down operation considerably. +.SS .BR "ogp_spi " programmer The flash ROM chip to access must be specified with the .B rom

1 0

[PATCH] W83697xx superio flash enable
by David Borg 05 May '12

05 May '12

Adds a function to enable the flash interface on w83697xx superio's. Still needs to be hooked up to the superio detection framework though. Signed-off-by: David Borg <borg.db(a)gmail.com>

2 1

[commit] r1529 - trunk
by repository service 05 May '12

05 May '12

Author: hailfinger Date: Sat May 5 22:43:42 2012 New Revision: 1529 URL: http://flashrom.org/trac/flashrom/changeset/1529 Log: Function to enable the flash interface on w83697 family SuperIO chips. Not hooked up to the superio detection framework yet. Signed-off-by: David Borg <borg.db(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed May 2 22:08:01 2012 (r1528) +++ trunk/board_enable.c Sat May 5 22:43:42 2012 (r1529) @@ -380,6 +380,39 @@ w836xx_ext_leave(port); } +/** + * Enable MEMW# and set ROM size to max. + * Supported chips: + * W83697HF/F/HG, W83697SF/UF/UG + */ +void w83697xx_memw_enable(uint16_t port) +{ + w836xx_ext_enter(port); + if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */ + if((sio_read(port, 0x2A) & 0xF0) == 0xF0) { + + /* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM */ + /* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */ + /* These bits are reserved on W83697HF/F/HG */ + /* Shouldn't be needed though. */ + + /* CR28 Bit3 must be set to 1 to enable flash access to */ + /* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG. */ + /* This bit is reserved on W83697HF/F/HG which default to 0 */ + sio_mask(port, 0x28, 0x08, 0x08); + + /* Enable MEMW# and set ROM size select to max. (4M)*/ + sio_mask(port, 0x24, 0x28, 0x38); + + } else { + msg_perr("WARNING: Flash interface in use by GPIO!\n"); + } + } else { + msg_pinfo("BIOS ROM is disabled\n"); + } + w836xx_ext_leave(port); +} + /* * Suited for: * - EPoX EP-8K5A2: VIA KT333 + VT8235

1 0

ASRock N68C-S
by Kaj Ailomaa 04 May '12

04 May '12

http://www.asrock.com/mb/overview.asp?model=n68c-s%20ucc sudo flashrom -V flashrom v0.9.5.2-r1517 on Linux 3.2.15-lowlatency (x86_64), built with libpci 3.1.7, GCC 4.6.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 957M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 1222 us, 10000 myus = 9878 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "N68C-S" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61" with PCI ID 10de:03e1. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org with 'CHIPSET: your board name' in the subject line. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Found Macronix flash chip "MX25L8005" (1024 kB, SPI). No operations were specified. lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:0a.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g 02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) 02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 03:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) 04:00.0 FireWire (IEEE 1394): Texas Instruments XIO2200A IEEE-1394a-2000 Controller (PHY/Link) (rev 01)

1 0

[coreboot] Flashing capability in coreboot
by Carl-Daniel Hailfinger 04 May '12

04 May '12

Hi, coreboot has a requirement to store some data in flash to get some chipsets to work well. There are multiple ways to achieve this: 1. Write flashing code from scratch. Pointless. 2. Use parts of the flashrom codebase or libflashrom. Advantages: coreboot and flashrom developers often work on both projects, enabling better cooperation. flashrom has the best chipset/flash support out there. 3. Use parts of the U-Boot codebase (which has drivers derived from flashrom). Advantages: The codebase is designed with firmware constraints in mind. http://review.coreboot.org/997 seems to implement this. As a flashrom developer, I would like to see flashrom code used in coreboot, and I'm very interested in finding and fixing any obstacles to that goal. Patrick, I think you worked on the coreboot patch mentioned above. Could you tell us about your reasons for choosing option 3, and how we can make option 2 viable? Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

Re: [flashrom] EWSR fixes + spi25.c spi_write_status_register cleanup
by Stefan Tauner 03 May '12

03 May '12

On Sun, 29 Apr 2012 01:50:44 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > will commit both patches as is if no one vetos in the next days. > > [PATCH 1/2] Tag all EWSR chips correctly. > [PATCH 2/2] spi25.c: Refactor spi_write_status_register helpers. done in r1527 and r1528, thanks steven for the datasheet digging! -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[commit] r1528 - trunk
by repository service 02 May '12

02 May '12

Author: stefanct Date: Wed May 2 22:08:01 2012 New Revision: 1528 URL: http://flashrom.org/trac/flashrom/changeset/1528 Log: spi25.c: Refactor spi_write_status_register helpers. In r1115 "Write protection handling for Atmel AT25*" the old spi_write_status_register function was duplicated to send WREN and EWSR commands respectively controlled by a new common wrapper function spi_write_status_register without a reason. Both functions' resulting code is equal apart from the opcode used. The code itself does also differ in the macros used, but their value (apart from the opcode) is equal. This patch adds a new parameter for the opcode to the helper function which allows removal of the other one. This relies on the fact that EWSR and WREN have the same INSIZE and OUTSIZE though. If that is really seen as an issue, the sizes could be made parameters too. This patch also changes the wrapper so that it no longer sets the feature bits of the struct flash(ctx) argument. This may result in changed output, because it no longer implicitly disables the debug message in following executions. Since almost all chips had their feature bits fixed in the previous commit, this is a minor problem. Also, spi_write_status_enable has been dead code since r658 or so. Remove it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/spi25.c Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Wed May 2 22:07:57 2012 (r1527) +++ trunk/spi25.c Wed May 2 22:08:01 2012 (r1528) @@ -764,63 +764,19 @@ * This is according the SST25VF016 datasheet, who knows it is more * generic that this... */ -static int spi_write_status_register_ewsr(struct flashctx *flash, int status) +static int spi_write_status_register_flag(struct flashctx *flash, int status, const unsigned char enable_opcode) { int result; int i = 0; - struct spi_command cmds[] = { - { - /* WRSR requires either EWSR or WREN depending on chip type. */ - .writecnt = JEDEC_EWSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_EWSR }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_WRSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution\n", - __func__); - /* No point in waiting for the command to complete if execution - * failed. - */ - return result; - } - /* WRSR performs a self-timed erase before the changes take effect. - * This may take 50-85 ms in most cases, and some chips apparently - * allow running RDSR only once. Therefore pick an initial delay of - * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. + /* + * WRSR requires either EWSR or WREN depending on chip type. + * The code below relies on the fact hat EWSR and WREN have the same + * INSIZE and OUTSIZE. */ - programmer_delay(100 * 1000); - while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) { - if (++i > 490) { - msg_cerr("Error: WIP bit after WRSR never cleared\n"); - return TIMEOUT_ERROR; - } - programmer_delay(10 * 1000); - } - return 0; -} - -static int spi_write_status_register_wren(struct flashctx *flash, int status) -{ - int result; - int i = 0; struct spi_command cmds[] = { { - /* WRSR requires either EWSR or WREN depending on chip type. */ .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, + .writearr = (const unsigned char[]){ enable_opcode }, .readcnt = 0, .readarr = NULL, }, { @@ -837,8 +793,7 @@ result = spi_send_multicommand(flash, cmds); if (result) { - msg_cerr("%s failed during command execution\n", - __func__); + msg_cerr("%s failed during command execution\n", __func__); /* No point in waiting for the command to complete if execution * failed. */ @@ -862,17 +817,18 @@ int spi_write_status_register(struct flashctx *flash, int status) { + int feature_bits = flash->feature_bits; int ret = 1; - if (!(flash->feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) { + if (!(feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) { msg_cdbg("Missing status register write definition, assuming " "EWSR is needed\n"); - flash->feature_bits |= FEATURE_WRSR_EWSR; + feature_bits |= FEATURE_WRSR_EWSR; } - if (flash->feature_bits & FEATURE_WRSR_WREN) - ret = spi_write_status_register_wren(flash, status); - if (ret && (flash->feature_bits & FEATURE_WRSR_EWSR)) - ret = spi_write_status_register_ewsr(flash, status); + if (feature_bits & FEATURE_WRSR_WREN) + ret = spi_write_status_register_flag(flash, status, JEDEC_WREN); + if (ret && (feature_bits & FEATURE_WRSR_EWSR)) + ret = spi_write_status_register_flag(flash, status, JEDEC_EWSR); return ret; }

1 0

[commit] r1527 - trunk
by repository service 02 May '12

02 May '12

Author: stefanct Date: Wed May 2 22:07:57 2012 New Revision: 1527 URL: http://flashrom.org/trac/flashrom/changeset/1527 Log: Tag all EWSR chips correctly. All SPI chips without a WRSR feature bit set were evaluated except the Sanyo LF25FW203A for which no datasheet is available. The following list includes all SPI-capable chips that still have no WRSR feature bit set: - AT26DF041 - AT45CS1282 - AT45DB011D - AT45DB021D - AT45DB041D - AT45DB081D - AT45DB161D - AT45DB321C - AT45DB321D - AT45DB642D All of them have no write function set and can be therefore ignored for now. Apart from those the generic chips are also not tagged. The opaque flash interface should not be affected. The SFDP dummy chip is changed to explicitly set EWSR if it can't deduce it dynamically. The vendor detecting generic chips can't write anyway. Signed-off-by: Steven Zakulec <spzakulec(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/sfdp.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed May 2 21:48:21 2012 (r1526) +++ trunk/flashchips.c Wed May 2 22:07:57 2012 (r1527) @@ -545,6 +545,7 @@ .model_id = AMIC_A25L05PT, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -578,6 +579,7 @@ .model_id = AMIC_A25L05PU, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -611,6 +613,7 @@ .model_id = AMIC_A25L10PT, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -645,6 +648,7 @@ .model_id = AMIC_A25L10PU, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -679,6 +683,7 @@ .model_id = AMIC_A25L20PT, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -713,6 +718,7 @@ .model_id = AMIC_A25L20PU, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -752,6 +758,7 @@ .model_id = AMIC_A25L40PT, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -786,6 +793,7 @@ .model_id = AMIC_A25L40PU, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -820,6 +828,7 @@ .model_id = AMIC_A25L80P, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -854,6 +863,7 @@ .model_id = AMIC_A25L16PT, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -891,6 +901,7 @@ .model_id = AMIC_A25L16PU, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -1701,6 +1712,7 @@ .model_id = ATMEL_AT25FS010, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1741,6 +1753,7 @@ .model_id = ATMEL_AT25FS040, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1778,6 +1791,7 @@ .model_id = ATMEL_AT26DF041, .total_size = 512, .page_size = 256, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1839,6 +1853,7 @@ .model_id = ATMEL_AT26DF161, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1876,6 +1891,7 @@ .model_id = ATMEL_AT26DF161A, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1914,6 +1930,7 @@ .model_id = ATMEL_AT26DF321, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1932,6 +1949,7 @@ .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -2062,6 +2080,7 @@ .model_id = ATMEL_AT45CS1282, .total_size = 16896 /* No power of two sizes */, .page_size = 1056 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2078,6 +2097,7 @@ .model_id = ATMEL_AT45DB011D, .total_size = 128 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2094,6 +2114,7 @@ .model_id = ATMEL_AT45DB021D, .total_size = 256 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2110,6 +2131,7 @@ .model_id = ATMEL_AT45DB041D, .total_size = 512 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2126,6 +2148,7 @@ .model_id = ATMEL_AT45DB081D, .total_size = 1024 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2142,6 +2165,7 @@ .model_id = ATMEL_AT45DB161D, .total_size = 2048 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2158,6 +2182,7 @@ .model_id = ATMEL_AT45DB321C, .total_size = 4224 /* No power of two sizes */, .page_size = 528 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2175,6 +2200,7 @@ .total_size = 4096 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .feature_bits = FEATURE_OTP, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, @@ -2192,6 +2218,7 @@ .model_id = ATMEL_AT45DB642D, .total_size = 8192 /* Size can only be determined from status register */, .page_size = 1024 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2477,6 +2504,7 @@ .model_id = EMST_F25L008A, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2510,6 +2538,7 @@ .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2542,6 +2571,7 @@ .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2574,6 +2604,7 @@ .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2606,6 +2637,7 @@ .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2638,6 +2670,7 @@ .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2671,6 +2704,7 @@ .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2704,6 +2738,7 @@ .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2737,6 +2772,7 @@ .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2770,6 +2806,7 @@ .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2803,6 +2840,7 @@ .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2836,6 +2874,7 @@ .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2869,6 +2908,7 @@ .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2902,6 +2942,7 @@ .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2935,6 +2976,7 @@ .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3002,6 +3044,7 @@ .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5197,6 +5240,7 @@ .model_id = ST_M25PE10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5227,6 +5271,7 @@ .model_id = ST_M25PE20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5257,6 +5302,7 @@ .model_id = ST_M25PE40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5287,6 +5333,7 @@ .model_id = ST_M25PE80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5317,6 +5364,7 @@ .model_id = ST_M25PE16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5376,6 +5424,7 @@ .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5406,6 +5455,7 @@ .model_id = PMC_PM25LV016B, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5442,6 +5492,7 @@ .model_id = PMC_PM25LV020, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5472,6 +5523,7 @@ .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5502,6 +5554,7 @@ .model_id = PMC_PM25LV080B, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5538,6 +5591,7 @@ .model_id = PMC_PM25LV512, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5873,6 +5927,7 @@ .model_id = SPANSION_S25FL004A, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5900,6 +5955,7 @@ .model_id = SPANSION_S25FL008A, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5927,6 +5983,7 @@ .model_id = SPANSION_S25FL016A, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5954,6 +6011,7 @@ .model_id = SPANSION_S25FL032A, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5981,6 +6039,7 @@ .model_id = SPANSION_S25FL064A, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6008,6 +6067,7 @@ .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, @@ -6038,6 +6098,7 @@ .model_id = SST_SST25VF080_REMS, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, @@ -6068,6 +6129,7 @@ .model_id = SST_SST25VF010_REMS, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6098,6 +6160,7 @@ .model_id = SST_SST25VF016B, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6134,6 +6197,7 @@ .model_id = SST_SST25VF032B, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6170,6 +6234,7 @@ .model_id = SST_SST25VF064C, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6206,6 +6271,7 @@ .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6236,6 +6302,7 @@ .model_id = SST_SST25VF040B, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6272,6 +6339,7 @@ .model_id = SST_SST25VF040B_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6308,6 +6376,7 @@ .model_id = SST_SST25VF080B, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7128,6 +7197,7 @@ .model_id = ST_M25P05A, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7160,6 +7230,7 @@ .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7187,6 +7258,7 @@ .model_id = ST_M25P10A, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7215,6 +7287,7 @@ .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7242,6 +7315,7 @@ .model_id = ST_M25P20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7269,6 +7343,7 @@ .model_id = ST_M25P40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7296,6 +7371,7 @@ .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7322,6 +7398,7 @@ .model_id = ST_M25P80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7349,6 +7426,7 @@ .model_id = ST_M25P16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7376,6 +7454,7 @@ .model_id = ST_M25P32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7403,6 +7482,7 @@ .model_id = ST_M25P64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7430,6 +7510,7 @@ .model_id = ST_M25P128, .total_size = 16384, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7458,7 +7539,7 @@ .total_size = 2048, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7488,6 +7569,7 @@ .model_id = ST_M25PX32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7518,6 +7600,7 @@ .model_id = ST_M25PX64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, Modified: trunk/sfdp.c ============================================================================== --- trunk/sfdp.c Wed May 2 21:48:21 2012 (r1526) +++ trunk/sfdp.c Wed May 2 22:07:57 2012 (r1527) @@ -176,10 +176,12 @@ flash->feature_bits = FEATURE_WRSR_EWSR; msg_cdbg2("EWSR (0x50).\n"); } - } else + } else { msg_cdbg2("non-volatile and the standard does not allow " "vendors to tell us whether EWSR/WREN is needed for " "status register writes - assuming EWSR.\n"); + flash->feature_bits = FEATURE_WRSR_EWSR; + } msg_cdbg2(" Write chunk size is "); if (tmp32 & (1 << 2)) {

1 0

[PATCH] board enable for ASUS P5BV-R
by Geoffrey McRae 02 May '12

02 May '12

Please see attached patch to enable write on ASUS P5BV-R boards used in ASUS RS120-E5/PA2 servers. Kind Regards Geoffrey McRae spacevs.com.

2 1

[commit] r1526 - trunk
by repository service 02 May '12

02 May '12

Author: stefanct Date: Wed May 2 21:48:21 2012 New Revision: 1526 URL: http://flashrom.org/trac/flashrom/changeset/1526 Log: Add board enable for ASUS P5BV-R. These are used in ASUS RS120-E5/PA2 servers. GPIO pin discovered, patch prepared and Tested-by: Geoffrey McRae Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue May 1 01:11:06 2012 (r1525) +++ trunk/board_enable.c Wed May 2 21:48:21 2012 (r1526) @@ -1520,6 +1520,15 @@ /* * Suited for: + * - ASUS P5BV-R: LGA775 + 3200 + ICH7 + */ +static int intel_ich_gpio20_raise(void) +{ + return intel_ich_gpio_set(20, 1); +} + +/* + * Suited for: * - ASUS P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2 * - ASUS P4C800-E Deluxe: socket478 + 875P + ICH5 * - ASUS P4P800: Intel socket478 + 865PE + ICH5R @@ -2160,6 +2169,7 @@ {0x8086, 0x2570, 0x1043, 0x80A5, 0x105A, 0x24D3, 0x1043, 0x80A6, NULL, NULL, NULL, P3, "ASUS", "P4SD-LA", 0, NT, intel_ich_gpio32_raise}, {0x1039, 0x0661, 0x1043, 0x8113, 0x1039, 0x5513, 0x1043, 0x8087, NULL, NULL, NULL, P3, "ASUS", "P4S800-MX", 512, OK, w836xx_memw_enable_2e}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", P3, "ASUS", "P5A", 0, OK, board_asus_p5a}, + {0x8086, 0x27b8, 0x1043, 0x819e, 0x8086, 0x29f0, 0x1043, 0x82a5, "^P5BV-R$", NULL, NULL, P3, "ASUS", "P5BV-R", 0, OK, intel_ich_gpio20_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, "^P5GD1 PRO$", NULL, NULL, P3, "ASUS", "P5GD1 Pro", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, "^P5GD1-VM$", NULL, NULL, P3, "ASUS", "P5GD1-VM/S", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x814e, NULL, NULL, NULL, P3, "ASUS", "P5GD1(-VM)", 0, NT, intel_ich_gpio21_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue May 1 01:11:06 2012 (r1525) +++ trunk/print.c Wed May 2 21:48:21 2012 (r1526) @@ -676,6 +676,7 @@ B("ASUS", "P5B", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL), B("ASUS", "P5B-Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL), B("ASUS", "P5BV-M", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard(a)uml12d.zq1.de> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."), + B("ASUS", "P5BV-R", 1, "http://www.asus.com/Server_Workstation/Servers/RS120E5PA2/", "Used in RS120-E5/PA2 servers."), B("ASUS", "P5GC-MX/1333", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL), B("ASUS", "P5GD1 Pro", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL), B("ASUS", "P5GD1-VM/S", 1, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."),

1 0

M5A78L-M LX
by Stefan Tauner 02 May '12

02 May '12

hi we had a report on IRC today regarding the asus M5A78L-M LX. writing works, but the mac address is lost and the LOM defunct. flashrom -V http://paste.flashrom.org/view.php?id=1184 binary as read by flashrom: http://paste.flashrom.org/uploads/1188.bin the mac address in that image is C8:60:00:57:42:FF and is replaced with ed:0b:00:00:e0:00 on writing the vendor image. the mac address can be found at multiple offsets and formats in the backup image: binary: 0x13bd6a ascii: 0x13bd80 binary: 0x1dc07a ascii: 0x1dc015 user did just restore the backup image, so we have no idea if leaving those offsets alone would be successful. i have added the board to our list. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

GA-M720-US3: flashrom -V
by Antoine Chassagnard 02 May '12

02 May '12

flashrom v0.9.5.2-r1515 on Linux 3.2.12-1-ARCH (x86_64), built with libpci 3.1.9, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 767M loops per second, 10 myus = 11 us, 100 myus = 103 us, 1000 myus = 1000 us, 10000 myus = 10010 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "M720-US3" DMI string system-version: " " DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "M720-US3" DMI string baseboard-version: "x.x" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8720 on port 0x2e Found chipset "NVIDIA MCP78S" with PCI ID 10de:075c. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:0752 at 00:01:1 MCP SPI BAR is at 0x00000000 MCP SPI is not used. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Serial flash segment 0xfffe0000-0xffffffff enabled Serial flash segment 0x000e0000-0x000fffff enabled Serial flash segment 0xffee0000-0xffefffff disabled Serial flash segment 0xfff80000-0xfffeffff enabled LPC write to serial flash enabled Serial flash pin 87 Serial flash port 0x0820 The following protocols are supported: LPC, SPI. Probing for AMIC A25L05PT, 64 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L05PU, 64 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L10PT, 128 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L10PU, 128 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L20PT, 256 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L20PU, 256 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L40PT, 512 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L40PU, 512 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L80P, 1024 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L16PT, 2048 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L16PU, 2048 kB: 4 byte RDID not supported on this SPI controller Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: 4 byte RDID not supported on this SPI controller Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x24, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x24, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x24, id2 0xc3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Macronix flash chip "MX25L8005" (1024 kB, SPI). No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x90 Restoring PCI config space for 00:01:0 reg 0x8c Restoring PCI config space for 00:01:0 reg 0x88

1 0

Found chipset "NVIDIA MCP65" with PCI ID 10de:0441.
by Väinö Kareinen 02 May '12

02 May '12

Hi, I send This verbose output from flashing my bios as requested in flashrom's output. # flashrom -V -v biosv2.2 flashrom v0.9.4-r1394 on Linux 3.0.0-16-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 699M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 999 us, 10000 myus = 10017 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7369" DMI string system-version: "1.1" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "MS-7369" DMI string baseboard-version: "1.1" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP65" with PCI ID 10de:0441. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0446 at 00:01:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x0115, req=1, gnt=1 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Verifying flash... VERIFIED. flashrom -V -w A7369NMS.290 flashrom v0.9.4-r1394 on Linux 3.0.0-16-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 699M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1006 us, 10000 myus = 9998 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7369" DMI string system-version: "1.1" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "MS-7369" DMI string baseboard-version: "1.1" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP65" with PCI ID 10de:0441. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0446 at 00:01:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:E, 0x092000-0x092fff:EW, 0x093000-0x093fff:EW, 0x094000-0x094fff:EW, 0x095000-0x095fff:EW, 0x096000-0x096fff:EW, 0x097000-0x097fff:EW, 0x098000-0x098fff:EW, 0x099000-0x099fff:EW, 0x09a000-0x09afff:EW, 0x09b000-0x09bfff:EW, 0x09c000-0x09cfff:EW, 0x09d000-0x09dfff:EW, 0x09e000-0x09efff:EW, 0x09f000-0x09ffff:EW, 0x0a0000-0x0a0fff:EW, 0x0a1000-0x0a1fff:EW, 0x0a2000-0x0a2fff:EW, 0x0a3000-0x0a3fff:EW, 0x0a4000-0x0a4fff:EW, 0x0a5000-0x0a5fff:EW, 0x0a6000-0x0a6fff:EW, 0x0a7000-0x0a7fff:EW, 0x0a8000-0x0a8fff:EW, 0x0a9000-0x0a9fff:EW, 0x0aa000-0x0aafff:EW, 0x0ab000-0x0abfff:EW, 0x0ac000-0x0acfff:EW, 0x0ad000-0x0adfff:EW, 0x0ae000-0x0aefff:EW, 0x0af000-0x0affff:EW, 0x0b0000-0x0b0fff:EW, 0x0b1000-0x0b1fff:EW, 0x0b2000-0x0b2fff:EW, 0x0b3000-0x0b3fff:EW, 0x0b4000-0x0b4fff:EW, 0x0b5000-0x0b5fff:EW, 0x0b6000-0x0b6fff:EW, 0x0b7000-0x0b7fff:EW, 0x0b8000-0x0b8fff:EW, 0x0b9000-0x0b9fff:EW, 0x0ba000-0x0bafff:EW, 0x0bb000-0x0bbfff:EW, 0x0bc000-0x0bcfff:EW, 0x0bd000-0x0bdfff:EW, 0x0be000-0x0befff:EW, 0x0bf000-0x0bffff:EW, 0x0c0000-0x0c0fff:EW, 0x0c1000-0x0c1fff:EW, 0x0c2000-0x0c2fff:EW, 0x0c3000-0x0c3fff:EW, 0x0c4000-0x0c4fff:EW, 0x0c5000-0x0c5fff:EW, 0x0c6000-0x0c6fff:EW, 0x0c7000-0x0c7fff:EW, 0x0c8000-0x0c8fff:EW, 0x0c9000-0x0c9fff:EW, 0x0ca000-0x0cafff:EW, 0x0cb000-0x0cbfff:EW, 0x0cc000-0x0ccfff:EW, 0x0cd000-0x0cdfff:EW, 0x0ce000-0x0cefff:EW, 0x0cf000-0x0cffff:EW, 0x0d0000-0x0d0fff:EW, 0x0d1000-0x0d1fff:EW, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:EW, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:E, 0x0ed000-0x0edfff:E, 0x0ee000-0x0eefff:E, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:EW, 0x0f1000-0x0f1fff:EW, 0x0f2000-0x0f2fff:EW, 0x0f3000-0x0f3fff:EW, 0x0f4000-0x0f4fff:EW, 0x0f5000-0x0f5fff:EW, 0x0f6000-0x0f6fff:EW, 0x0f7000-0x0f7fff:EW, 0x0f8000-0x0f8fff:EW, 0x0f9000-0x0f9fff:EW, 0x0fa000-0x0fafff:EW, 0x0fb000-0x0fbfff:EW, 0x0fc000-0x0fcfff:EW, 0x0fd000-0x0fdfff:EW, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:EW Erase/write done. Verifying flash... VERIFIED. flashrom -V -v A7369NMS.290 flashrom v0.9.4-r1394 on Linux 3.0.0-16-generic (x86_64), built with libpci 3.1.7, GCC 4.6.1, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 699M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1000 us, 10000 myus = 10235 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7369" DMI string system-version: "1.1" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "MS-7369" DMI string baseboard-version: "1.1" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP65" with PCI ID 10de:0441. This chipset is marked as untested. If you are using an up-to-date version of flashrom please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:0446 at 00:01:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. This chipset supports the following protocols: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF010.REMS, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A.RES, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Verifying flash... VERIFIED. -- -Väinö-

1 0

[PATCH 1/1] Add manpage entry for pony_spi
by Virgil-Adrian Teaca 02 May '12

02 May '12

Hello, First of all, I want to note that the properly name of the native Ponyprog2000 hardware programmer is "SI-Prog" and not "SI_Prog". Also, talking about: "Please note that while USB-to-serial adapters work under certain circumstances, this slows down operation considerably." Well, I for one, I understand by "considerably" that the operation will do hours, instead of minutes. The sadly truth is that operation will be epic slow. If I remember right, that EEEPC's W25X40, which I flashed, is not a huge flash, just 4M. Still, it was flashed in cca 27 hours. Then, yes, PONY_SPI works fine over an PL2303 USB/serial adapter, under Linux, but its job is epically slow... So, I believe that is right to warn the user that he have to wait a very very long time. All the best, Virgil.

1 0

[PATCH 1/1] Add manpage entry for pony_spi
by Michael Karcher 01 May '12

01 May '12

Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- flashrom.8 | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/flashrom.8 b/flashrom.8 index ff8ed9d..b2b356d 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -201,6 +201,9 @@ atmegaXXu2-flasher by Stefan Tauner." .BR "* rayer_spi" " (for SPI flash ROMs attached to a RayeR parport " or Xilinx DLC5 compatible cable) .sp +.BR "* pony_spi" " (for SPI flash ROMs attached to a SI_Prog serial port +bitbanging adapter)" +.sp .BR "* nicintel_spi" " (for SPI flash ROMs on Intel Gigabit network cards)" .sp .BR "* ogp_spi" " (for SPI flash ROMs on Open Graphics Project graphics card)" @@ -614,6 +617,26 @@ More information about the RayeR hardware is available at The schematic of the Xilinx DLC 5 was published at .BR "http://www.xilinx.com/itp/xilinx4/data/docs/pac/appendixb.html " . .SS +.BR "pony_spi " programmer +The serial port (like /dev/ttyS0, /dev/ttyUSB0 on Linux or COM3 on windows) is +specified using the mandatory +.B dev +parameter. The adapter type is selectable between SI-Prog (used for +SPI devices with PonyProg 2000) or a custom made serial bitbanging programmer +named "serbang". The optional +.B type +parameter accepts the values "si_prog" (default) or "serbang". +.sp +Information about the SI_Prog adapter can be found at +.BR "http://www.lancos.com/siprogsch.html " . +.sp +An example call to flashrom is +.sp +.B " flashrom \-p pony_spi:dev=/dev/ttyS0,type=serbang" +.sp +Please note that while USB-to-serial adapters work under certain circumstances, +this slows down operation considerably. +.SS .BR "ogp_spi " programmer The flash ROM chip to access must be specified with the .B rom -- 1.7.10

1 0

Re: [flashrom] PONY_SPI, now with Windows support
by Michael Karcher 01 May '12

01 May '12

On Mon, 2012-04-30 at 00:55 +0200, Virgil-Adrian Teaca wrote: > Then, I attached another patch, which I hope it is what we need... I just replaced eight spaces by a tab at two points in serial.c, otherwise, it really is fine. > Signed-off-by: Virgil-Adrian Teaca <darkstarlinux(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Committed in r1525. Thanks for your patch.

1 0

[commit] r1525 - trunk
by repository service 01 May '12

01 May '12

Author: mkarcher Date: Tue May 1 01:11:06 2012 New Revision: 1525 URL: http://flashrom.org/trac/flashrom/changeset/1525 Log: Add serial port bitbanging code This adds the pony_spi driver which supports the SI_Prog adapter, which is commonly used for SPI chips with PonyProg 2000, and a custom adapter called "SERBANG" which differs in the logic of two pins. Signed-off-by: Virgil-Adrian Teaca <darkstarlinux(a)gmail.com> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Added: trunk/pony_spi.c Modified: trunk/Makefile trunk/flashrom.c trunk/print.c trunk/programmer.h trunk/serial.c Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Fri Apr 27 22:41:23 2012 (r1524) +++ trunk/Makefile Tue May 1 01:11:06 2012 (r1525) @@ -292,6 +292,9 @@ # RayeR SPIPGM hardware support CONFIG_RAYER_SPI ?= yes +# PonyProg2000 SPI hardware support +CONFIG_PONY_SPI ?= yes + # Always enable 3Com NICs for now. CONFIG_NIC3COM ?= yes @@ -348,6 +351,9 @@ ifeq ($(CONFIG_RAYER_SPI), yes) override CONFIG_BITBANG_SPI = yes else +ifeq ($(CONFIG_PONY_SPI), yes) +override CONFIG_BITBANG_SPI = yes +else ifeq ($(CONFIG_INTERNAL), yes) override CONFIG_BITBANG_SPI = yes else @@ -362,6 +368,7 @@ endif endif endif +endif ifeq ($(CONFIG_INTERNAL), yes) FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1' @@ -388,6 +395,12 @@ NEED_PCI := yes endif +ifeq ($(CONFIG_PONY_SPI), yes) +FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1' +PROGRAMMER_OBJS += pony_spi.o +NEED_SERIAL := yes +endif + ifeq ($(CONFIG_BITBANG_SPI), yes) FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1' PROGRAMMER_OBJS += bitbang_spi.o Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Fri Apr 27 22:41:23 2012 (r1524) +++ trunk/flashrom.c Tue May 1 01:11:06 2012 (r1525) @@ -201,6 +201,16 @@ }, #endif +#if CONFIG_PONY_SPI == 1 + { + .name = "pony_spi", + .init = pony_spi_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, +}, +#endif + #if CONFIG_NICINTEL == 1 { .name = "nicintel", Added: trunk/pony_spi.c ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ trunk/pony_spi.c Tue May 1 01:11:06 2012 (r1525) @@ -0,0 +1,160 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2012 Virgil-Adrian Teaca + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Driver for the SI-Prog like hardware by Lancos.com. + * See http://www.lancos.com/siprogsch.html for schematics and instructions. + */ + +#include <stdlib.h> +#include <string.h> + +#include "flash.h" +#include "programmer.h" + +/* We have: + + MOSI -----> DTR + MISO -----> CTS + SCK --+--> RTS + +--> DSR + CS# -----> TXD + +*/ + +enum pony_type { + TYPE_SI_PROG, + TYPE_SERBANG, +}; + +/* The hardware programmer used. */ +static enum pony_type pony_type = TYPE_SI_PROG; + +static void pony_bitbang_set_cs(int val) +{ + if (pony_type == TYPE_SI_PROG) + { + /* CS# is negated by the SI-Prog programmer. */ + val ^= 1; + } + sp_set_pin(PIN_TXD, val); +} + +static void pony_bitbang_set_sck(int val) +{ + sp_set_pin(PIN_RTS, val); +} + +static void pony_bitbang_set_mosi(int val) +{ + sp_set_pin(PIN_DTR, val); +} + +static int pony_bitbang_get_miso(void) +{ + int tmp; + + tmp = sp_get_pin(PIN_CTS); + + if (pony_type == TYPE_SERBANG) + { + /* MISO is negated by the SERBANG programmer. */ + tmp ^= 1; + } + return tmp; +} + +static const struct bitbang_spi_master bitbang_spi_master_pony = { + .type = BITBANG_SPI_MASTER_PONY, + .set_cs = pony_bitbang_set_cs, + .set_sck = pony_bitbang_set_sck, + .set_mosi = pony_bitbang_set_mosi, + .get_miso = pony_bitbang_get_miso, + .half_period = 0, +}; + +int pony_spi_init(void) +{ + char *arg = NULL; + int i, data_in, data_out, have_device = 0; + int have_prog = 1; + + /* The parameter is on format "dev=/dev/device,type=serbang" */ + arg = extract_programmer_param("dev"); + + if (arg && strlen(arg)) { + sp_fd = sp_openserport( arg, 9600 ); + have_device++; + } + free(arg); + + if (!have_device) { + msg_perr("Error: No valid device specified.\n" + "Use flashrom -p pony_spi:dev=/dev/device\n"); + + return 1; + } + /* Register the shutdown callback. */ + if (register_shutdown(serialport_shutdown, NULL)) { + return 1; + } + arg = extract_programmer_param("type"); + + if (arg) { + if (!strcasecmp( arg, "serbang")) { + pony_type = TYPE_SERBANG; + } else if (!strcasecmp( arg, "si_prog") ) { + pony_type = TYPE_SI_PROG; + } else { + msg_perr("Error: Invalid programmer type specified.\n"); + free(arg); + return 1; + } + } + free(arg); + + msg_pdbg("Using the %s programmer.\n", ((pony_type == TYPE_SI_PROG ) ? "SI-Prog" : "SERBANG")); + /* + * Detect if there is a SI-Prog compatible programmer connected. + */ + pony_bitbang_set_cs(1); + pony_bitbang_set_mosi(1); + + /* We toggle SCK while we keep MOSI and CS# on. */ + for (i = 1; i <= 10; ++i) { + data_out = i & 1; + sp_set_pin(PIN_RTS, data_out); + programmer_delay( 1000 ); + data_in = sp_get_pin(PIN_DSR); + + if (data_out != data_in) { + have_prog = 0; + break; + } + } + + if (!have_prog) { + msg_perr( "No SI-Prog compatible hardware detected.\n" ); + return 1; + } + + if (bitbang_spi_init(&bitbang_spi_master_pony)) { + return 1; + } + return 0; +} Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri Apr 27 22:41:23 2012 (r1524) +++ trunk/print.c Tue May 1 01:11:06 2012 (r1525) @@ -507,6 +507,12 @@ /* FIXME */ msg_ginfo("RayeR parallel port programmer\n"); #endif +#if CONFIG_PONY_SPI == 1 + msg_ginfo("\nSupported devices for the %s programmer:\n", + programmer_table[PROGRAMMER_PONY_SPI].name); + /* FIXME */ + msg_ginfo("SI-Prog and SERBANG serial port programmer\n"); +#endif #if CONFIG_NICINTEL == 1 msg_ginfo("\nSupported devices for the %s programmer:\n", programmer_table[PROGRAMMER_NICINTEL].name); Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Fri Apr 27 22:41:23 2012 (r1524) +++ trunk/programmer.h Tue May 1 01:11:06 2012 (r1525) @@ -69,6 +69,9 @@ #if CONFIG_RAYER_SPI == 1 PROGRAMMER_RAYER_SPI, #endif +#if CONFIG_PONY_SPI == 1 + PROGRAMMER_PONY_SPI, +#endif #if CONFIG_NICINTEL == 1 PROGRAMMER_NICINTEL, #endif @@ -110,6 +113,9 @@ #if CONFIG_RAYER_SPI == 1 BITBANG_SPI_MASTER_RAYER, #endif +#if CONFIG_PONY_SPI == 1 + BITBANG_SPI_MASTER_PONY, +#endif #if CONFIG_NICINTEL_SPI == 1 BITBANG_SPI_MASTER_NICINTEL, #endif @@ -430,6 +436,11 @@ int rayer_spi_init(void); #endif +/* pony_spi.c */ +#if CONFIG_PONY_SPI == 1 +int pony_spi_init(void); +#endif + /* bitbang_spi.c */ int bitbang_spi_init(const struct bitbang_spi_master *master); @@ -492,7 +503,7 @@ #if CONFIG_DEDIPROG == 1 SPI_CONTROLLER_DEDIPROG, #endif -#if CONFIG_OGP_SPI == 1 || CONFIG_NICINTEL_SPI == 1 || CONFIG_RAYER_SPI == 1 || (CONFIG_INTERNAL == 1 && (defined(__i386__) || defined(__x86_64__))) +#if CONFIG_OGP_SPI == 1 || CONFIG_NICINTEL_SPI == 1 || CONFIG_RAYER_SPI == 1 || CONFIG_PONY_SPI == 1 || (CONFIG_INTERNAL == 1 && (defined(__i386__) || defined(__x86_64__))) SPI_CONTROLLER_BITBANG, #endif #if CONFIG_LINUX_SPI == 1 @@ -636,4 +647,31 @@ int serialport_write(unsigned char *buf, unsigned int writecnt); int serialport_read(unsigned char *buf, unsigned int readcnt); +/* Serial port/pin mapping: + + 1 CD <- + 2 RXD <- + 3 TXD -> + 4 DTR -> + 5 GND -- + 6 DSR <- + 7 RTS -> + 8 CTS <- + 9 RI <- +*/ +enum SP_PIN { + PIN_CD = 1, + PIN_RXD, + PIN_TXD, + PIN_DTR, + PIN_GND, + PIN_DSR, + PIN_RTS, + PIN_CTS, + PIN_RI, +}; + +void sp_set_pin(enum SP_PIN pin, int val); +int sp_get_pin(enum SP_PIN pin); + #endif /* !__PROGRAMMER_H__ */ Modified: trunk/serial.c ============================================================================== --- trunk/serial.c Fri Apr 27 22:41:23 2012 (r1524) +++ trunk/serial.c Tue May 1 01:11:06 2012 (r1525) @@ -32,6 +32,9 @@ #include <conio.h> #else #include <termios.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/ioctl.h> #endif #include "flash.h" #include "programmer.h" @@ -172,6 +175,58 @@ #endif } +void sp_set_pin(enum SP_PIN pin, int val) { +#ifdef _WIN32 + DWORD ctl; + + if(pin == PIN_TXD) { + ctl = val ? SETBREAK: CLRBREAK; + } + else if(pin == PIN_DTR) { + ctl = val ? SETDTR: CLRDTR; + } + else { + ctl = val ? SETRTS: CLRRTS; + } + EscapeCommFunction(sp_fd, ctl); +#else + int ctl, s; + + if(pin == PIN_TXD) { + ioctl(sp_fd, val ? TIOCSBRK : TIOCCBRK, 0); + } + else { + s = (pin == PIN_DTR) ? TIOCM_DTR : TIOCM_RTS; + ioctl(sp_fd, TIOCMGET, &ctl); + + if (val) { + ctl |= s; + } + else { + ctl &= ~s; + } + ioctl(sp_fd, TIOCMSET, &ctl); + } +#endif +} + +int sp_get_pin(enum SP_PIN pin) { + int s; +#ifdef _WIN32 + DWORD ctl; + + s = (pin == PIN_CTS) ? MS_CTS_ON : MS_DSR_ON; + GetCommModemStatus(sp_fd, &ctl); +#else + int ctl; + s = (pin == PIN_CTS) ? TIOCM_CTS : TIOCM_DSR; + ioctl(sp_fd, TIOCMGET, &ctl); +#endif + + return ((ctl & s) ? 1 : 0); + +} + void sp_flush_incoming(void) { #ifdef _WIN32

1 0

Test report Medion MD5000 V1.2 (MSI MS-6701) - Chip not detected
by Gurken Papst 30 Apr '12

30 Apr '12

Winbond W49F002UP12B is not detected on MSI MS-6701 (Branded as Medion MD5000 V1.2) with SiS 648/Winbond W83697HF. Output of flashrom -V: flashrom v0.9.5.2-r1524 on Linux 2.6.39.3 (i686), built with libpci 3.0.0, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1735M loops per second, 10 myus = 28 us, 100 myus = 267 us, 1000 myus = 2670 us, 10000 myus = 26665 us, 4 myus = 12 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "MEDIONPC" DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "MICRO-STAR INTERNATIONAL CO., LTD" DMI string baseboard-product-name: "MS-6701" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "SiS 648" with PCI ID 1039:0648. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Found southbridge 1039:0963 at 00:02:0 OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0xffff, id2 0x00ff Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x76, id2 0x9d, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x25, id2 0x17, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring PCI config space for 00:02:0 reg 0x45 Restoring PCI config space for 00:02:0 reg 0x40 Output of lspci -nnvvxxx: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 645xx [1039:0648] (rev 03) Subsystem: Silicon Integrated Systems [SiS] 645xx [1039:0648] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-sis 00: 39 10 48 06 07 00 10 22 03 00 00 06 00 20 80 00 10: 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 39 10 48 06 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: d8000000-dfffffff Prefetchable memory behind bridge: e0000000-e7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 39 10 02 00 07 01 00 00 00 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 00 20 20: 00 d8 f0 df 00 e0 f0 e7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] [1039:0963] (rev 14) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 39 10 63 09 0f 00 00 02 14 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: sis96x_smbus 00: 39 10 16 00 01 00 80 02 00 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: c1 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00:02.3 FireWire (IEEE 1394) [0c00]: Silicon Integrated Systems [SiS] FireWire Controller [1039:7007] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. MS-6701 [1462:701d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 3000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at e8426000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 00: 39 10 07 70 06 00 10 02 00 10 00 0c 00 20 00 00 10: 00 60 42 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 1d 70 30: 00 00 00 00 64 00 00 00 00 00 00 00 09 02 04 0c 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (prog-if 80 [Master]) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:7010] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Interrupt: pin ? routed to IRQ 16 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at 4000 [size=16] Capabilities: <access denied> Kernel driver in use: pata_sis 00: 39 10 13 55 05 00 10 02 00 80 01 01 00 80 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 40 00 00 00 00 00 00 00 00 00 00 62 14 10 70 30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:7010] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at e400 [size=256] Region 1: I/O ports at e800 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH 00: 39 10 12 70 05 00 90 02 a0 00 01 04 00 20 00 00 10: 01 e4 00 00 01 e8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 10 70 30: 00 00 00 00 48 00 00 00 00 00 00 00 03 03 34 0b 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:7010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e8420000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 80 00 10: 00 00 42 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 10 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 50 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:7010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at e8421000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 00 00 10: 00 10 42 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 10 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 50 00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:7010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 22 Region 0: Memory at e8422000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 00 00 10: 00 20 42 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 10 70 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 50 00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:7010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 23 Region 0: Memory at e8423000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00: 39 10 02 70 06 00 90 02 00 20 03 0c 08 20 00 00 10: 00 30 42 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 10 70 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 50 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91) Subsystem: Micro-Star International Co., Ltd. MS-6701 motherboard [1462:0900] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at e8424000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 20020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sis900 00: 39 10 00 09 07 00 90 02 91 00 00 02 00 20 00 00 10: 01 ec 00 00 00 40 42 e8 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 00 09 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 34 0b 00:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01) Subsystem: Creatix Polymedia GmbH Medion 7134 [16be:0003] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 8000ns max) Interrupt: pin A routed to IRQ 19 Region 0: Memory at e8425000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: saa7134 00: 31 11 34 71 06 00 90 02 01 00 80 04 00 20 00 00 10: 00 50 42 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 be 16 03 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 08 20 00:0a.0 Communication controller [0780]: Intel Corporation 536EP Data Fax Modem [8086:1040] Subsystem: Creatix Polymedia GmbH V.9X DSP Data Fax Modem [16be:1040] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=4M] Capabilities: <access denied> 00: 86 80 40 10 07 00 90 02 00 00 80 07 08 20 00 00 10: 00 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 be 16 40 10 30: 00 00 00 00 e0 00 00 00 00 00 00 00 09 01 00 00 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV20 [GeForce3] [10de:0200] (rev a3) (prog-if 00 [VGA controller]) Subsystem: Elsa AG GLADIAC 920 [1048:0c70] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=64M] Region 2: Memory at e4000000 (32-bit, prefetchable) [size=512K] [virtual] Expansion ROM at e4080000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: nouveau 00: de 10 00 02 07 00 b0 02 a3 00 00 03 00 20 00 00 10: 00 00 00 d8 08 00 00 e0 08 00 00 e4 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 10 70 0c 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01 Output of superiotool -deV: superiotool r5050 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x10fe, id=0x1260 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x6012, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83697HF/F/HG (id=0x60, rev=0x12) at 0x2e Register dump: idx 20 21 22 23 24 25 26 28 29 2a val 60 12 ff fe 10 00 00 00 00 f0 def 60 NA ff 00 00 00 00 00 00 MM LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 03 3b def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 00 def 01 02 f8 03 00 00 LDN 0x06 (Consumer IR) idx 30 60 61 70 val 00 00 00 00 def 00 00 00 00 LDN 0x07 (Game port, GPIO 1) idx 30 60 61 62 63 f0 f1 f2 val 01 02 01 00 00 ff 00 00 def 00 02 01 00 00 ff 00 00 LDN 0x08 (MIDI port, GPIO 5) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 val 01 03 30 00 00 0a ff 00 00 00 00 00 def 00 03 30 00 00 09 ff 00 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4) idx 30 60 61 f0 f1 f2 f3 f4 f5 f6 f7 f8 f5 val 00 00 00 ff ff ff ff ff ff ff ff ff ff def 00 00 00 ff 00 00 ff 00 00 ff 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 val 00 00 00 00 ff 00 00 00 00 af 0e 00 00 00 00 def 00 00 00 00 NA 00 00 00 00 00 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 val 01 02 90 00 def 00 00 00 00 Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found.

1 0

Re: [flashrom] Test report Biostar M7VIQ - Chip now detected, reading works
by Gurken Papst 30 Apr '12

30 Apr '12

On Sat, Apr 28, 2012 at 01:24, Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > i have hacked it into something that might work for your board; the > generalization can happen later. i will reply to this mail with two > patches. please apply them to SVN HEAD and try to probe and read, but > not erase/write yet please. Nice job, detection and reading are working. Dumps from UniFlash and Flashrom are equal. Output of flashrom -V -r m7viq_flashrom.img: flashrom v0.9.5.2-r1524 on Linux 2.6.39.3 (i686), built with libpci 3.0.0, GCC 4.4.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 832M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 999 us, 10000 myus = 10186 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "KM266-8235" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "VIA VT8235" with PCI ID 1106:3177. Enabling flash write... OK. Disabling flash write protection for board "Biostar M7VIQ"... OK. The following protocols are supported: Non-SPI. [...] Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xda, id2 0x0b Found Winbond flash chip "W49F002U/N" (256 kB, Parallel) at physical address 0xfffc0000. [...] Found Winbond flash chip "W49F002U/N" (256 kB, Parallel). Reading flash... done. Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41 Do you need any additional information?

1 0

Re: [flashrom] PONY_SPI, now with Windows support
by Virgil-Adrian Teaca 30 Apr '12

30 Apr '12

And there is the latest PONY_SPI patch. Also, I think that the public api should work better with the function names as serialport_set_pin() and serialport_get_pin() ... All the best, Virgil.

1 0

Re: [flashrom] PONY_SPI, now with Windows support
by Michael Karcher 30 Apr '12

30 Apr '12

On Sun, 2012-04-29 at 23:58 +0200, Virgil-Adrian Teaca wrote: > Then, there is attached a new patch, where code is cleaned and some > main bitbanging functions are moved to serial.c, to simplify the > pony_spi.c and to make them available to all possible serial drivers > which want bitbanging... Great! The code is now styled and designed as I expect it for flashrom code, just some minor nitpicks and one detail I missed to mention in the last review, and is a problem we can't expect you to know. Let's start with that one: In programmer.h, we have: #if CONFIG_OGP_SPI == 1 || CONFIG_NICINTEL_SPI == 1 || CONFIG_RAYER_SPI == 1 || CONFIG_PONY_SPI == 1 || (CONFIG_INTERNAL == 1 && (defined(__i386__) || defined(__x86_64__))) SPI_CONTROLLER_BITBANG, #endif If the only bitbang programmer enabled is your programmer, SPI_CONTROLLER_BITBANG doesn't get defined. I hit that problem when I tried to cross-compile for Windows, as on Windows, we don't support the internal programmer or PCI-based programmers (which also means direct port I/O programmers like rayer for now), so your programmer would be the only one enabled, but is not in the list of programmers tested. In my oppion, the whole test should be replaced by #if CONFIG_BITBANG_SPI == 1 because the Makefile already handles defining CONFIG_BITBANG_SPI the right way. [Makefile] > LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS) > -OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS) > +OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS) This change is an white-space change (removing a space at end of line. It should not have been there in the first place, though) which is unrelated to your patch. If it doesn't take too much hassle for you, please remove this change from your patch. [pony_spi.c] > +static void pony_bitbang_set_cs(int val) > +{ > + if(pony_type == TYPE_SI_PROG) Please add a space after "if" > + if( pony_type == TYPE_SERBANG ) Please add a space after "if" and remove the inner spaces > + /* The parameter is on format "dev=/dev/device,type=serbang" */ > + arg = extract_programmer_param( "dev" ); No spaces inside the parens, please. > + } else { > + msg_perr("Error: Invalid programmer type specified.\n"); > + free( arg ); > + return 1; > + } > + } > + free( arg ); > + > + msg_pdbg("Using the %s programmer.\n", ((pony_type == TYPE_SI_PROG ) ? "SI-Prog" : "SERBANG")); In the "free" calls, remove space, too. Generally, remove the space after "!" for negation. [programmer.h] > +enum sp_pin { > + PIN_CD = 1, > + PIN_RXD, > + PIN_TXD, > + PIN_DTR, > + PIN_GND, > + PIN_DSR, > + PIN_RTS, > + PIN_CTS, > + PIN_RI, > +}; Can you rename them to SP_PIN_...? This enum is defined in programmer.h now, which is included nearly everywhere in flashrom, not only on serial port related stuff, so limiting to names starting with serialport or SP_ seems appropriate. [serial.c] > + ioctl( sp_fd, val ? TIOCSBRK : TIOCCBRK, 0 ); spacing inside parentheses. > + ioctl( sp_fd, TIOCMGET, &ctl ); dito. > + if ( val ) { dito. > + GetCommModemStatus( sp_fd, &ctl ); dito. > @@ -212,7 +266,7 @@ > } > if (!tmp) > msg_pdbg("Empty write\n"); > - writecnt -= tmp; > + writecnt -= tmp; > buf += tmp; > } unrelated whitespace change. Regards, Michael Karcher

3 2

Re: [flashrom] PONY_SPI, now with Windows support
by Michael Karcher 29 Apr '12

29 Apr '12

On Sun, 2012-04-29 at 18:35 +0200, Virgil-Adrian Teaca wrote: > This PONY_SPI patch have also the Windows support, but, to note that > this new code is untested. Thank you very much for sharing your work! It might make sense to put the serial port pin manipulation functions into serial.c instead of pony_spi.c (of course they can't be static then, should be named sp_xxx instead of pony_xxx and the PIN_xxx enumeration should be named "SERIAL_PIN_xxx") Comments from other developers? I will start with some coding style issues, but please see the code comments below, too. I can't provide you any indent command line for flashrom, but we generally don't use spaces on the inner sider of parentheses. So inside flashrom: WRONG: ioctl( sp_fd, TIOCMGET, &ctl ); RIGHT: ioctl(sp_fd, TICMGET, &ctl); On the other hand, we *do* write a space before the opening parenthesis, but only after keywords (if, while, for), not after function names, so for code in flashrom: WRONG: if( pin == PIN_TXD ) RIGHT: if (pin == PIN_TXD) Furthermore, I noticed you are using a lot of blank lines. I appreciate structuring your code by inserting blank lines between logical blocks to make it more readable, but having every second line blank (like you do in the programmer detection loop for example) does not really add any value over not having blank lines. In that specific example, the only blank line I might leave in is the one before the "if" block. > @@ -122,6 +122,11 @@ > else > override CONFIG_RAYER_SPI = no > endif > +ifeq ($(CONFIG_PONY_SPI), yes) > +UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes > +else > +override CONFIG_PONY_SPI = no > +endif > ifeq ($(CONFIG_NIC3COM), yes) > UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes > else > @@ -246,6 +251,11 @@ > else > override CONFIG_RAYER_SPI = no > endif > +ifeq ($(CONFIG_PONY_SPI), yes) > +UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes > +else > +override CONFIG_PONY_SPI = no > +endif > ifeq ($(CONFIG_ATAHPT), yes) > UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes > else Drop these two hunks. They are for programmers that directly access hardware through processor I/O cycles. You don't do that, as you use the OS driver for the serial port instead. > +ifeq ($(CONFIG_PONY_SPI), yes) > +FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1' > +PROGRAMMER_OBJS += pony_spi.o > +endif Add a "NEED_SERIAL := yes" in the if block, otherwise serial.c might not get included. > +#include <stdlib.h> > +#include <string.h> > +#include <termios.h> > +#include <unistd.h> > +#include <sys/types.h> > +#include <sys/stat.h> > +#include <fcntl.h> > +#include <sys/ioctl.h> The last six headers are not needed on Windows, and some of them don't even exist. Wrap these includes by "#ifndef _WIN32" > +#ifdef _WIN32 > +#include <conio.h> > +#endif That include is useless, drop it. > +enum pony_pin { > + PIN_CD = 0, > + PIN_RXD, > + PIN_TXD, > + PIN_DTR, > + PIN_GND, > + PIN_DSR, > + PIN_RTS, > + PIN_CTS, > + PIN_RI, > +}; I wonder whether it makes sense to define all 9 pins of the socket. For example: What are you intending to use "PIN_GND" for? In the case, you just define them to have all pins defined, I would suggest to start with PIN_CD at 1, so the enumerators match the conventional pin numbers. > +static void pony_set_pin( int pin, int val ) { Why don't you use "enum pony_pin" as type for the pin? > +static int pony_get_pin( int pin ) { dito. One might even think about using two different enums, one for input pins, one for output pins. > +static void pony_bitbang_set_cs( int val ) > +{ > + if( pony_type == TYPE_SI_PROG ) > + { > + /* CS# is negated by the SI-Prog programmer. */ > + val = val ? 0 : 1; please write this as "val = !val;" or "val ^= 1;" > + } > + > + pony_set_pin( PIN_TXD, val ); > +} > +static int pony_bitbang_get_miso(void) > +{ > + int tmp; > + > + tmp = pony_get_pin( PIN_CTS ); > + > + if( pony_type == TYPE_SERBANG ) > + { > + /* MISO is negated by the SERBANG programmer. */ > + tmp = tmp ? 0 : 1; dito, use "tmp = !tmp;" here, or do it like /* MISO is negated by the SERBANG programmer, */ if (pony_type == TYPE_SERBANG) return !tmp; else return tmp; > + /* Register the shutdown callback. */ > + > + if ( register_shutdown( serialport_shutdown, NULL ) ) { > + return 1; > + } If you would register the shutdown function directly after opening the port, you would not have to call serialport_shutdown(NULL) yourself in the error cases before this line. > + > + /* Get the initial value before writing to any line. */ > + Remove this comment. It doesn't apply. > + if ( bitbang_spi_init( &bitbang_spi_master_pony ) ) { > + return 1; > + } > + > + return 0; > +} > diff -urN flashrom.orig/print.c flashrom/print.c > --- flashrom.orig/print.c 2012-03-13 16:52:50.000000000 +0100 > +++ flashrom/print.c 2012-04-24 00:50:46.329483950 +0200 > @@ -507,6 +507,12 @@ > /* FIXME */ > msg_ginfo("RayeR parallel port programmer\n"); > #endif > +#if CONFIG_PONY_SPI == 1 > + msg_ginfo("\nSupported devices for the %s programmer:\n", > + programmer_table[PROGRAMMER_PONY_SPI].name); > + /* FIXME */ > + msg_ginfo("SI-Prog serial port programmer\n"); Add serbang here, too. Regards, Michael Karcher

2 1

PONY_SPI, now with Windows support
by Virgil-Adrian Teaca 29 Apr '12

29 Apr '12

Hello, This PONY_SPI patch have also the Windows support, but, to note that this new code is untested. All the best, Virgil.

1 0

Re: [flashrom] LGPL
by Carl-Daniel Hailfinger 29 Apr '12

29 Apr '12

Hi Jay, Am 27.04.2012 14:59 schrieb Rolette, James (Jay): >> It's easy to make requests like this, even though i find your >> explanation as to why you think VxWorks users (what vxworks users would >> even know of flashrom?) will not use flashrom rather hairy. > Not sure I understand the expression here... hairy == questionable/unlikely? I think Luc's point is that the system library exception in the GPL should provide the legal coverage you need. You mentioned that sharing the address space between proprietary code and GPL code could be a problem, but given that a process on e.g x86 shares its address space with the libraries it uses, it is a normal case that proprietary library code and GPL application code live in the same address space, and IMO the GPL system library exception was meant to cover exactly that case. Unless I have totally misunderstood how VxWorks works, this would mean you're totally fine with a GPL flashrom. >> It's not nearly so easy to actually make such a change, as such a license >> change entails getting permission from all individual contributors. > Ok. Wasn't sure how copyright assignment was being handled on flashrom. We didn't use copyright assignment at all, and that was originally intended to assure everybody that nobody would relicense the code at will. >> So, here is the deal, a deal that i think most people on this ml would >> wholeheartedly agree with: if _you_ want LGPL, _you_ get to sollicite >> all individual contributors. > Fair enough. A few questions on that: > > 1) I'm assuming there are is a small core of folks that form the heart of > the project. I'd like to start with them if possible because there is no > point in going broader than that if the core developers don't agree. > > Would someone be willing to provide a list of the "leaders"? A quick look > at the source shows a few names that show up a lot (Uwe, Carl-Daniel, > Stefan, etc.), but always hard to tell without the benefit of having > followed the project over time. The Signed-off-by statements in the logs would give you the best indication, and they should cover roughly 95% of the current codebase. The rest (very early commits) is by authors who might be more difficult to reach. > 2) What is required from each contributor? Just an email approving a move > to LGPL for their contribution? Something more specific? If you attempt relicensing because your legal department has doubts about GPL code, I think they won't be happy with confirmation e-mails (due to them being easy to fake) and would require at least some written and signed statement for every contributor. That would make relicensing a project needing a lot of effort, though. > 3) Is it ok to derive the list of approvers based on the copyright statement > in the source files? Use the Signed-off-by statements, they are better indicators. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[PATCH 2/2] spi25.c: Refactor spi_write_status_register helpers.
by Stefan Tauner 29 Apr '12

29 Apr '12

In r1115 "Write protection handling for Atmel AT25*" the old spi_write_status_register function was duplicated to send WREN and EWSR commands respectively controlled by a new common wrapper function spi_write_status_register without a reason. Both functions' resulting code is equal apart from the opcode used. The code itself does also differ in the macros used, but their value (apart from the opcode) is equal. This patch adds a new parameter for the opcode to the helper function which allows removal of the other one. This relies on the fact that EWSR and WREN have the same INSIZE and OUTSIZE though. If that is really seen as an issue, the sizes could be made parameters too. This patch also changes the wrapper so that it no longer sets the feature bits of the struct flash(ctx) argument. This may result in changed output, because it no longer implicitly disables the debug message in following executions. Since almost all chips had their feature bits fixed in the previous commit, this is a minor problem. Also, spi_write_status_enable has been dead code since r658 or so. Remove it. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> --- spi25.c | 72 +++++++++++++-------------------------------------------------- 1 file changed, 14 insertions(+), 58 deletions(-) diff --git a/spi25.c b/spi25.c index b7e8189..083d85f 100644 --- a/spi25.c +++ b/spi25.c @@ -764,63 +764,19 @@ int spi_write_status_enable(struct flashctx *flash) * This is according the SST25VF016 datasheet, who knows it is more * generic that this... */ -static int spi_write_status_register_ewsr(struct flashctx *flash, int status) +static int spi_write_status_register_flag(struct flashctx *flash, int status, const unsigned char enable_opcode) { int result; int i = 0; - struct spi_command cmds[] = { - { - /* WRSR requires either EWSR or WREN depending on chip type. */ - .writecnt = JEDEC_EWSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_EWSR }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_WRSR_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution\n", - __func__); - /* No point in waiting for the command to complete if execution - * failed. - */ - return result; - } - /* WRSR performs a self-timed erase before the changes take effect. - * This may take 50-85 ms in most cases, and some chips apparently - * allow running RDSR only once. Therefore pick an initial delay of - * 100 ms, then wait in 10 ms steps until a total of 5 s have elapsed. + /* + * WRSR requires either EWSR or WREN depending on chip type. + * The code below relies on the fact hat EWSR and WREN have the same + * INSIZE and OUTSIZE. */ - programmer_delay(100 * 1000); - while (spi_read_status_register(flash) & JEDEC_RDSR_BIT_WIP) { - if (++i > 490) { - msg_cerr("Error: WIP bit after WRSR never cleared\n"); - return TIMEOUT_ERROR; - } - programmer_delay(10 * 1000); - } - return 0; -} - -static int spi_write_status_register_wren(struct flashctx *flash, int status) -{ - int result; - int i = 0; struct spi_command cmds[] = { { - /* WRSR requires either EWSR or WREN depending on chip type. */ .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, + .writearr = (const unsigned char[]){ enable_opcode }, .readcnt = 0, .readarr = NULL, }, { @@ -837,8 +793,7 @@ static int spi_write_status_register_wren(struct flashctx *flash, int status) result = spi_send_multicommand(flash, cmds); if (result) { - msg_cerr("%s failed during command execution\n", - __func__); + msg_cerr("%s failed during command execution\n", __func__); /* No point in waiting for the command to complete if execution * failed. */ @@ -862,17 +817,18 @@ static int spi_write_status_register_wren(struct flashctx *flash, int status) int spi_write_status_register(struct flashctx *flash, int status) { + int feature_bits = flash->feature_bits; int ret = 1; - if (!(flash->feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) { + if (!(feature_bits & (FEATURE_WRSR_WREN | FEATURE_WRSR_EWSR))) { msg_cdbg("Missing status register write definition, assuming " "EWSR is needed\n"); - flash->feature_bits |= FEATURE_WRSR_EWSR; + feature_bits |= FEATURE_WRSR_EWSR; } - if (flash->feature_bits & FEATURE_WRSR_WREN) - ret = spi_write_status_register_wren(flash, status); - if (ret && (flash->feature_bits & FEATURE_WRSR_EWSR)) - ret = spi_write_status_register_ewsr(flash, status); + if (feature_bits & FEATURE_WRSR_WREN) + ret = spi_write_status_register_flag(flash, status, JEDEC_WREN); + if (ret && (feature_bits & FEATURE_WRSR_EWSR)) + ret = spi_write_status_register_flag(flash, status, JEDEC_EWSR); return ret; } -- Kind regards, Stefan Tauner

1 0

[PATCH 1/2] Tag all EWSR chips correctly.
by Stefan Tauner 29 Apr '12

29 Apr '12

All SPI chips without a WRSR feature bit set were evaluated except the Sanyo LF25FW203A for which no datasheet is available. The following list includes all SPI-capable chips that still have no WRSR feature bit set: - AT26DF041 - AT45CS1282 - AT45DB011D - AT45DB021D - AT45DB041D - AT45DB081D - AT45DB161D - AT45DB321C - AT45DB321D - AT45DB642D All of them have no write function set and can be therefore ignored for now. Apart from those the generic chips are also not tagged. The opaque flash interface should not be affected. The SFDP dummy chip is changed to explicitly set EWSR if it can't deduce it dynamically. The vendor detecting generic chips can't write anyway. Signed-off-by: Steven Zakulec <spzakulec(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flashchips.c | 85 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++- sfdp.c | 4 ++- 2 files changed, 87 insertions(+), 2 deletions(-) diff --git a/flashchips.c b/flashchips.c index 5904e2b..b48552c 100644 --- a/flashchips.c +++ b/flashchips.c @@ -545,6 +545,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L05PT, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -578,6 +579,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L05PU, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -611,6 +613,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L10PT, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -645,6 +648,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L10PU, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -679,6 +683,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L20PT, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -713,6 +718,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L20PU, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -752,6 +758,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L40PT, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -786,6 +793,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L40PU, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -820,6 +828,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L80P, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -854,6 +863,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L16PT, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -891,6 +901,7 @@ const struct flashchip flashchips[] = { .model_id = AMIC_A25L16PU, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -1701,6 +1712,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT25FS010, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1741,6 +1753,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT25FS040, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1778,6 +1791,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT26DF041, .total_size = 512, .page_size = 256, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1839,6 +1853,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT26DF161, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1876,6 +1891,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT26DF161A, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1914,6 +1930,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT26DF321, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -1932,6 +1949,7 @@ const struct flashchip flashchips[] = { .total_size = 512, .page_size = 256, .tested = TEST_UNTESTED, + .feature_bits = FEATURE_WRSR_WREN, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -2062,6 +2080,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45CS1282, .total_size = 16896 /* No power of two sizes */, .page_size = 1056 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2078,6 +2097,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB011D, .total_size = 128 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2094,6 +2114,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB021D, .total_size = 256 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2110,6 +2131,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB041D, .total_size = 512 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2126,6 +2148,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB081D, .total_size = 1024 /* Size can only be determined from status register */, .page_size = 256 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2142,6 +2165,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB161D, .total_size = 2048 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2158,6 +2182,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB321C, .total_size = 4224 /* No power of two sizes */, .page_size = 528 /* No power of two sizes */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2175,6 +2200,7 @@ const struct flashchip flashchips[] = { .total_size = 4096 /* Size can only be determined from status register */, .page_size = 512 /* Size can only be determined from status register */, /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .feature_bits = FEATURE_OTP, .tested = TEST_BAD_READ, .probe = probe_spi_rdid, @@ -2192,6 +2218,7 @@ const struct flashchip flashchips[] = { .model_id = ATMEL_AT45DB642D, .total_size = 8192 /* Size can only be determined from status register */, .page_size = 1024 /* Size can only be determined from status register */, + /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2477,6 +2504,7 @@ const struct flashchip flashchips[] = { .model_id = EMST_F25L008A, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2510,6 +2538,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2542,6 +2571,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B05, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2574,6 +2604,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2606,6 +2637,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2638,6 +2670,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2671,6 +2704,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2704,6 +2738,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2737,6 +2772,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2770,6 +2806,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2803,6 +2840,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2836,6 +2874,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2869,6 +2908,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2902,6 +2942,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -2935,6 +2976,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3002,6 +3044,7 @@ const struct flashchip flashchips[] = { .model_id = EON_EN25B64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5197,6 +5240,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PE10, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5227,6 +5271,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PE20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5257,6 +5302,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PE40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5287,6 +5333,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PE80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5317,6 +5364,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PE16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5376,6 +5424,7 @@ const struct flashchip flashchips[] = { .model_id = PMC_PM25LV010, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5406,6 +5455,7 @@ const struct flashchip flashchips[] = { .model_id = PMC_PM25LV016B, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5442,6 +5492,7 @@ const struct flashchip flashchips[] = { .model_id = PMC_PM25LV020, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5472,6 +5523,7 @@ const struct flashchip flashchips[] = { .model_id = PMC_PM25LV040, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5502,6 +5554,7 @@ const struct flashchip flashchips[] = { .model_id = PMC_PM25LV080B, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5538,6 +5591,7 @@ const struct flashchip flashchips[] = { .model_id = PMC_PM25LV512, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5873,6 +5927,7 @@ const struct flashchip flashchips[] = { .model_id = SPANSION_S25FL004A, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5900,6 +5955,7 @@ const struct flashchip flashchips[] = { .model_id = SPANSION_S25FL008A, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5927,6 +5983,7 @@ const struct flashchip flashchips[] = { .model_id = SPANSION_S25FL016A, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5954,6 +6011,7 @@ const struct flashchip flashchips[] = { .model_id = SPANSION_S25FL032A, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5981,6 +6039,7 @@ const struct flashchip flashchips[] = { .model_id = SPANSION_S25FL064A, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6008,6 +6067,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, @@ -6038,6 +6098,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF080_REMS, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, @@ -6068,6 +6129,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF010_REMS, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6098,6 +6160,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF016B, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6134,6 +6197,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF032B, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6170,6 +6234,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF064C, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6206,6 +6271,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6236,6 +6302,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF040B, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -6272,6 +6339,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF040B_REMS, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PR, .probe = probe_spi_rems, .probe_timing = TIMING_ZERO, @@ -6308,6 +6376,7 @@ const struct flashchip flashchips[] = { .model_id = SST_SST25VF080B, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7128,6 +7197,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P05A, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7160,6 +7230,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P05_RES, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7187,6 +7258,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P10A, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7215,6 +7287,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P10_RES, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7242,6 +7315,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P20, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7269,6 +7343,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P40, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7296,6 +7371,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P40_RES, .total_size = 512, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_res1, .probe_timing = TIMING_ZERO, @@ -7322,6 +7398,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P80, .total_size = 1024, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7349,6 +7426,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P16, .total_size = 2048, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7376,6 +7454,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7403,6 +7482,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7430,6 +7510,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25P128, .total_size = 16384, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7458,7 +7539,7 @@ const struct flashchip flashchips[] = { .total_size = 2048, .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_OTP, + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7488,6 +7569,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PX32, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -7518,6 +7600,7 @@ const struct flashchip flashchips[] = { .model_id = ST_M25PX64, .total_size = 8192, .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PRE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, diff --git a/sfdp.c b/sfdp.c index 39d59e0..708b66b 100644 --- a/sfdp.c +++ b/sfdp.c @@ -176,10 +176,12 @@ static int sfdp_fill_flash(struct flashctx *flash, uint8_t *buf, uint16_t len) flash->feature_bits = FEATURE_WRSR_EWSR; msg_cdbg2("EWSR (0x50).\n"); } - } else + } else { msg_cdbg2("non-volatile and the standard does not allow " "vendors to tell us whether EWSR/WREN is needed for " "status register writes - assuming EWSR.\n"); + flash->feature_bits = FEATURE_WRSR_EWSR; + } msg_cdbg2(" Write chunk size is "); if (tmp32 & (1 << 2)) { -- Kind regards, Stefan Tauner

1 0

EWSR fixes + spi25.c spi_write_status_register cleanup
by Stefan Tauner 29 Apr '12

29 Apr '12

will commit both patches as is if no one vetos in the next days. [PATCH 1/2] Tag all EWSR chips correctly. [PATCH 2/2] spi25.c: Refactor spi_write_status_register helpers.

1 0

Intel DN2800MT no flash device found
by Marek Zakrzewski 29 Apr '12

29 Apr '12

flashrom -Vr bios.bin flashrom v0.9.5.2-r1515 on Linux 3.2.13-xxxx-std-ipv6-64 (x86_64), built with libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-52), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 933M loops per second, 10 myus = 10 us, 100 myus = 155 us, 1000 myus = 1061 us, 10000 myus = 10057 us, 4 myus = 7 us, OK. Initializing internal programmer No coreboot table found. -s: No such file or directory dmidecode execution unsuccessful - continuing without DMI info Found chipset "Intel NM10" with PCI ID 8086:27bc. Enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x1 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x2 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x3 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xe WARNING: Setting 0xdc from 0xe to 0xf on NM10 failed. New value is 0xe. Root Complex Register Block address = 0xfed1c000 GCS = 0x61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (reserved) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4040 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x000041bf (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x5006 (PREOP) 0x56: 0x123b (OPTYPE) 0x58: 0x05200302 (OPMENU) 0x5c: 0x000100ab (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: invalid prefetching/caching settings, PROBLEMS, continuing anyway The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L05PU, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L10PT, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L10PU, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L20PT, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L20PU, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L40PT, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L40PU, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L80P, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L16PT, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L16PU, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L512, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L010, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L020, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L080, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L016, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L032, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25LQ032, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF021, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF041A, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF081, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF081A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF161, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF321, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF321A, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF641(A), 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DQ161, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25F512B, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25FS010, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25FS040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF041, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF081A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF161, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF161A, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26F004, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45CS1282, 16896 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB011D, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB021D, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB041D, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB081D, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB161D, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB321C, 4224 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB321D, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB642D, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for EMST F25L008A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B05, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B05T, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B10T, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B20T, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B40T, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B80T, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B16T, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B32T, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B64T, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F05, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q80(A), 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q32(A/B), 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q128, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25QH16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L512, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1005, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L2005, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L4005, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L8005, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1605, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1635D, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1635E, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L3205, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L3235D, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L6405, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L12805, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV016B, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV020, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV080B, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV512, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Sanyo LF25FW203A, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL004A, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL008A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL016A, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL032A, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL064A, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF032B, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF064C, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P05-A, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P05, 64 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0xbf Probing for ST M25P10-A, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P10, 128 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0xbf Probing for ST M25P20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P40-old, 512 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0xbf Probing for ST M25P80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P128, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25PX16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25PX32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25PX64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q128, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel unknown Atmel SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon unknown Eon SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix unknown Macronix SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC unknown PMC SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST unknown SST SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST unknown ST SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Generic unknown SPI chip (RDID), 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring MMIO space at 0x7f9346ce7070 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

[PATCH 2/2] Add board enable for Biostar M7VIQ.
by Stefan Tauner 28 Apr '12

28 Apr '12

The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but that would not be a good choice for ID. Accept the generic IDs (+ DMI string) for now because this will be generic soonish(tm) anyway. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- board_enable.c | 13 +++++++++++++ print.c | 2 +- 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/board_enable.c b/board_enable.c index 8f01fc1..6221575 100644 --- a/board_enable.c +++ b/board_enable.c @@ -415,6 +415,18 @@ static void w83697xx_memw_enable(uint16_t port) /* * Suited for: + * - Biostar M7VIQ: VIA KM266 + VT8235 + */ +static int w83697xx_memw_enable_2e(void) +{ + w83697xx_memw_enable(0x2E); + + return 0; +} + + +/* + * Suited for: * - EPoX EP-8K5A2: VIA KT333 + VT8235 * - Albatron PM266A Pro: VIA P4M266A + VT8235 * - Shuttle AK31 (all versions): VIA KT266 + VT8233 @@ -2208,6 +2220,7 @@ const struct board_match board_matches[] = { {0x10DE, 0x0260, 0x1043, 0x81BC, 0x10DE, 0x026C, 0x1043, 0x8249, "^P5N-E SLI$",NULL, NULL, P3, "ASUS", "P5N-E SLI", 0, NT, it8718f_gpio63_raise}, {0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, P3, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2443, 0x1043, 0x8027, 0x8086, 0x1130, 0x1043, 0x8027, NULL, NULL, NULL, P3, "ASUS", "TUSL2-C", 0, NT, intel_ich_gpio21_raise}, + {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3116, 0x1106, 0x3116, "^KM266-8235$", NULL, NULL, P3, "Biostar", "M7VIQ", 0, OK, w83697xx_memw_enable_2e}, {0x10b7, 0x9055, 0x1028, 0x0082, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, P3, "Dell", "OptiPlex GX1", 0, OK, intel_piix4_gpo30_lower}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, P3, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, {0x10de, 0x03ea, 0x1019, 0x2602, 0x10de, 0x03e0, 0x1019, 0x2602, NULL, NULL, NULL, P3, "Elitegroup", "GeForce6100SM-M", 0, OK, board_ecs_geforce6100sm_m}, diff --git a/print.c b/print.c index 84a1604..4706589 100644 --- a/print.c +++ b/print.c @@ -721,7 +721,7 @@ const struct board_info boards_known[] = { B("Biostar", "H61MU3", 0, NULL, "Probing works (Eon EN25Q32(A/B), 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), - B("Biostar", "M7VIQ", 0, NULL, "Missing board enable (W83697HF/F/HG/G), see http://www.flashrom.org/pipermail/flashrom/2012-February/008863.html"), + B("Biostar", "M7VIQ", 1, NULL, NULL), B("Biostar", "N61PB-M2S", 1, NULL, NULL), B("Biostar", "N68S3+", 1, NULL, NULL), B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Test report Biostar M7VIQ - Chip not detected
by Stefan Tauner 28 Apr '12

28 Apr '12

On Fri, 27 Apr 2012 23:21:59 +0200 Gurken Papst <gurken.papst(a)gmail.com> wrote: > OK, so where do I get these patches and on which version should I > apply them? I never got a response from Carl-Daniel on my offer to > test the patches (or I missed it), so I was still waiting for those > patches. Sorry, if this caused confusion. ahem. right. sorry :) i guess carldani wanted to complete the generic SIO handling for that SIO. the patch that existed was not enough/complete, but i missed that. i have hacked it into something that might work for your board; the generalization can happen later. i will reply to this mail with two patches. please apply them to SVN HEAD and try to probe and read, but not erase/write yet please. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 1

Re: [flashrom] Test report Biostar M7VIQ - Chip not detected
by Stefan Tauner 27 Apr '12

27 Apr '12

On Mon, 27 Feb 2012 23:46:31 +0100 Gurken Papst <gurken.papst(a)gmail.com> wrote: > On Mon, Feb 27, 2012 at 00:27, Carl-Daniel Hailfinger wrote: > > Would you be willing to test a few patches? > > Sure. I am not used to patch/build, but I think I will be able to get > it done. The instructions on <http://www.flashrom.org/Downloads> don't > seem too hard. It will take some time however, until I can test the > patched version on the mainboard. I expect to be able to test it on > one of the next weekends. ping. if you need some help you can always visit us on IRC or ask here. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[commit] r1524 - in trunk: . Documentation
by repository service 27 Apr '12

27 Apr '12

Author: stefanct Date: Fri Apr 27 22:41:23 2012 New Revision: 1524 URL: http://flashrom.org/trac/flashrom/changeset/1524 Log: Add a bunch of new/tested stuff and various small changes 12. Tested Mainboards: OK: - ASUS M4A785T-M http://www.flashrom.org/pipermail/flashrom/2012-April/009118.html - ASUS P5VD2-MX http://www.flashrom.org/pipermail/flashrom/2012-March/009014.html - ASUS P8Z68-V PRO/GEN3 http://www.flashrom.org/pipermail/flashrom/2012-April/009086.html - Bachmann electronic OT200 http://www.flashrom.org/pipermail/flashrom/2012-April/009094.html - Biostar N61PB-M2S http://www.flashrom.org/pipermail/flashrom/2012-March/008958.html - GIGABYTE GA-H61M-D2-B3 http://www.flashrom.org/pipermail/flashrom/2012-March/009002.html - MSI MS-7740 (H61MA-E35(B3)) http://www.flashrom.org/pipermail/flashrom/2012-March/008985.html - Tyan S2875 (Tiger K8W) http://www.flashrom.org/pipermail/flashrom/2012-March/008986.html - ZOTAC nForce 630i Supreme (N73U-Supreme) http://www.flashrom.org/pipermail/flashrom/2012-April/009073.html - ZOTAC ZBOX AD02 (PLUS) http://www.flashrom.org/pipermail/flashrom/2012-April/009047.html NOT OK: - ASRock H67M http://www.flashrom.org/pipermail/flashrom/2012-March/008909.html - ASUS P8P67 LE http://paste.flashrom.org/view.php?id=1097 - ASUS Maximus IV Extreme http://www.flashrom.org/pipermail/flashrom/2012-March/009033.html - Biostar H61MU3 http://www.flashrom.org/pipermail/flashrom/2012-February/008832.html - Biostar M7VIQ http://www.flashrom.org/pipermail/flashrom/2012-February/008863.html - Dell Inspiron 580 http://www.flashrom.org/pipermail/flashrom/2012-March/008888.html - Dell Vostro 460 http://www.flashrom.org/pipermail/flashrom/2012-April/009144.html - Fujitsu-Siemens CELSIUS W410 (D3062-A1) http://www.flashrom.org/pipermail/flashrom/2012-March/008987.html - EPoX EP-3PTA http://www.flashrom.org/pipermail/flashrom/2012-April/009043.html - HP XW6400 http://www.flashrom.org/pipermail/flashrom/2012-March/009006.html - HP XW9300 http://www.flashrom.org/pipermail/flashrom/2012-February/008862.html - Intel DG965OT http://paste.flashrom.org/view.php?id=1096 - Intel DN2800MT (Marshalltown) http://www.flashrom.org/pipermail/flashrom/2012-April/009095.html - Lenovo T420 http://paste.flashrom.org/view.php?id=1095 - Lenovo X1 http://www.flashrom.org/pipermail/flashrom/2012-April/009135.html - MSI GF615M-P33 http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html Tested flash chips: - mark EN25Q32(A/B) as TEST_OK_PROBE (+P) http://www.flashrom.org/pipermail/flashrom/2012-February/008832.html - mark S25FL032A as TEST_OK_PR (+PR) http://www.flashrom.org/pipermail/flashrom/2012-April/009105.html - mark AT25DF161 as TEST_OK_PROBE (+P) http://www.flashrom.org/pipermail/flashrom/2012-April/009095.html - mark SST as TEST_OK_PREW (+EW) http://www.flashrom.org/pipermail/flashrom/2012-April/009094.html Tested chipset enables: - H61 (various reports) - SiS 755 http://www.flashrom.org/pipermail/flashrom/2012-April/009072.html - Fix compilation of ich_descriptor_tool which was broken since r1492. - Add Documentation regarding unlocking the ME region on Intel chipsets. - Fix reading the flash descriptor via FDOC/FDOD and prettyprinting of the descriptor on boards with 5 active regions. - Reorder some boards in print.c. - Add Intel 7 Series (Panther Point) PCI IDs. - Add preliminary PCI IDs for future Intel chipsets (DH89xxCC and Lynx Point) see https://lkml.org/lkml/2012/2/20/467 - Change the message for untested chipsets to send only after an attempt to update the firmware with flashrom. - Fix warnings in ich_descriptor_tool's build. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/Documentation/mysteries_intel.txt trunk/chipset_enable.c trunk/flashchips.c trunk/flashrom.c trunk/ich_descriptors.c trunk/print.c trunk/programmer.h Modified: trunk/Documentation/mysteries_intel.txt ============================================================================== --- trunk/Documentation/mysteries_intel.txt Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/Documentation/mysteries_intel.txt Fri Apr 27 22:41:23 2012 (r1524) @@ -15,4 +15,83 @@ See also http://www.flashrom.org/pipermail/flashrom/2011-August/007606.html = Unlocking the ME region = -TODO + If the ME region is locked by the FRAP register in descriptor mode, the host + software is not allowed to read or write any address inside that region. There + are different ways to unlock access: + + - A pin strap: Flash Descriptor Security Override Strap (as indicated by the + Flash Descriptor Override Pin Strap Status (FDOPSS) in HSFS. That pin is + probably not accessible to end users on consumer boards (every Intel doc i + have seen stresses that this is for debugging in manufacturing only and + should not be available for end users). + The ME indicates this in bits [19:16] (Operation Mode) in the HFS register of + the HECI/MEI PCI device by setting them to 4 (SECOVR_JMPR) [MODE_CTRL]. + + - Intel Management Engine BIOS Extension (MEBx) Disable + This option may be available to end users on some boards usually accessible + by hitting ctrl+p after BIOS POST. Quote: "'Disabling' the Intel ME does not + really disable it: it causes the Intel ME code to be halted at an early stage + of the Intel ME's booting so that the system has no traffic originating from + the Intel ME on any of the buses." [MEBX] The ME indicates this in + bits [19:16] (Operation Mode) in the HFS register of the HECI/MEI PCI device + by setting them to 3 (Soft Temporary Disable) [MODE_CTRL]. + + - Previous to Ibex Peak/5 Series chipsets removing the DIMM from slot (or + channel?) #0 disables the ME completely, which may give the host access to + the ME region. + + - HMRFPO (Host ME Region Flash Protection Override) Enable MEI command + This is the most interesting one because it allows to temporarily disable + the ME region protection by software. The ME indicates this in bits [19:16] + (Operation Mode) in the HFS register of the HECI/MEI PCI device by setting + them to 5 (SECOVER_MEI_MSG) [MODE_CTRL]. + +== MEI/HECI == + Communication between the host software and the different services provided by + the ME is done via a packet-based protocol that uses MMIO transfers to one or + more virtual PCI devices. Upon this layer there exist various services that can + be used to read out hardware management values (e.g. temperatures, fan speeds + etc.). The lower levels of that protocol are well documented: + The locations/offsets of the PCI MMIO registers are noted in the chipset + datasheets. The actually communication is documented in a whitepaper [DCMI] and + an outdated as well as a current Linux kernel implementation (currently in + staging/ exist [KERNEL]. There exists a patch that re-implements this in user + space (as part of flashrom). + +== Problems == + The problem is that only very few higher level protocols are documented publicly, + especially the bunch of messages that contain the HMRFPO commands is probably + well protected and only documented in ME-specific docs and the BIOS writer's + guides. We are aware of a few leaked documents though that give us a few hints + about it, but nothing substantial regarding its implementation. + + The documents are somewhat contradicting each other in various points which + might be due to factual changes in process of time or due to the different + capabilities of the ME firmwares, example: + + Intel's Flash Programming Tool (FPT) "automatically stops ME writing to SPI + ME Region, to prevent both writing at the same time, causing data corruption." [ME8] + + "FPT is not HMRFPO-capable, so needs [the help of the FDOPS pin] HDA_SDO if + used to update the ME Region." [SPS] + + When looking at the various ME firmware editions (and different chipsets), things + get very unclear. Some docs say that HMRFPO needs to be sent before End-of-POST + (EOP), others say that the ME region can be updated in the field or that some + vendor tools use it for updates. This needs to be investigated further before + drawing any conclusion. + +[MODE_CTRL] Client Platform Enabling Tour: Platform Software + Document Number: 439167, Revision 1.2, page 52 +[MEBX] Intel Management Engine BIOS Extension (MEBX) User's Guide + Revision 1.2, Section 3.1 and 3.5 +[DCMI] DCMI Host Interface Specification + Revision 1.0 +[KERNEL] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=tree;f=d… +[SPI_PROG] Ibex Peak SPI Programming Guide + Document Number: 403598, Revision 1.3, page 79 +[ME8] Manufacturing with Intel Management Engine (ME) Firmware 8.X on Intel 7 Series + Revision 2.0, page 59 +[SPS] Manufacturing with Intel Management Engine (ME) on Intel C600 Series Chipset 1 + for Romley Server 2 Platforms using Server Platform Services (SPS) Firmware + Revision 2.2, page 51 Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/chipset_enable.c Fri Apr 27 22:41:23 2012 (r1524) @@ -636,6 +636,18 @@ return enable_flash_ich_dc_spi(dev, name, CHIPSET_6_SERIES_COUGAR_POINT); } +/* Panther Point aka. 7 series */ +static int enable_flash_pch7(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_dc_spi(dev, name, CHIPSET_7_SERIES_PANTHER_POINT); +} + +/* Lynx Point aka. 8 series */ +static int enable_flash_pch8(struct pci_dev *dev, const char *name) +{ + return enable_flash_ich_dc_spi(dev, name, CHIPSET_8_SERIES_LYNX_POINT); +} + static int via_no_byte_merge(struct pci_dev *dev, const char *name) { uint8_t val; @@ -1186,7 +1198,7 @@ {0x1039, 0x0745, OK, "SiS", "745", enable_flash_sis540}, {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, - {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis540}, + {0x1039, 0x0755, OK, "SiS", "755", enable_flash_sis540}, {0x1039, 0x5511, NT, "SiS", "5511", enable_flash_sis5511}, {0x1039, 0x5571, NT, "SiS", "5571", enable_flash_sis530}, {0x1039, 0x5591, NT, "SiS", "5591/5592", enable_flash_sis530}, @@ -1278,9 +1290,19 @@ {0x8086, 0x1c52, NT, "Intel", "C202", enable_flash_pch6}, {0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_pch6}, {0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_pch6}, - {0x8086, 0x1c5c, NT, "Intel", "H61", enable_flash_pch6}, + {0x8086, 0x1c5c, OK, "Intel", "H61", enable_flash_pch6}, {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_pch6}, {0x8086, 0x1d41, NT, "Intel", "X79", enable_flash_pch6}, + {0x8086, 0x1e44, NT, "Intel", "Z77", enable_flash_pch7}, + {0x8086, 0x1e46, NT, "Intel", "Z75", enable_flash_pch7}, + {0x8086, 0x1e49, NT, "Intel", "B75", enable_flash_pch7}, + {0x8086, 0x1e4a, NT, "Intel", "H77", enable_flash_pch7}, + {0x8086, 0x1e57, NT, "Intel", "HM77", enable_flash_pch7}, + {0x8086, 0x1e58, NT, "Intel", "UM77", enable_flash_pch7}, + {0x8086, 0x1e59, NT, "Intel", "HM76", enable_flash_pch7}, + {0x8086, 0x1e5d, NT, "Intel", "HM75", enable_flash_pch7}, + {0x8086, 0x1e5e, NT, "Intel", "HM70", enable_flash_pch7}, + {0x8086, 0x2310, NT, "Intel", "DH89xxCC", enable_flash_pch7}, {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e}, {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e}, {0x8086, 0x2440, OK, "Intel", "ICH2", enable_flash_ich_4e}, @@ -1342,6 +1364,38 @@ {0x8086, 0x7198, OK, "Intel", "440MX", enable_flash_piix4}, {0x8086, 0x8119, OK, "Intel", "SCH Poulsbo", enable_flash_poulsbo}, {0x8086, 0x8186, OK, "Intel", "Atom E6xx(T)/Tunnel Creek", enable_flash_tunnelcreek}, + {0x8086, 0x8c40, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c41, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c42, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c43, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c44, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c45, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c46, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c47, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c48, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c49, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c4a, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c4b, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c4c, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c4d, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c4e, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c4f, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c50, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c51, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c52, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c53, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c54, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c55, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c56, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c57, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c58, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c59, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c5a, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c5b, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c5c, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c5d, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c5e, NT, "Intel", "Lynx Point", enable_flash_pch8}, + {0x8086, 0x8c5f, NT, "Intel", "Lynx Point", enable_flash_pch8}, #endif {}, }; @@ -1380,9 +1434,11 @@ if (chipset_enables[i].status == NT) { msg_pinfo("\nThis chipset is marked as untested. If " "you are using an up-to-date version\nof " - "flashrom please email a report to " - "flashrom(a)flashrom.org including a\nverbose " - "(-V) log. Thank you!\n"); + "flashrom *and* were (not) able to " + "successfully update your firmware with it,\n" + "then please email a report to " + "flashrom(a)flashrom.org including a verbose " + "(-V) log.\nThank you!\n"); } msg_pinfo("Enabling flash write... "); ret = chipset_enables[i].doit(dev, Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/flashchips.c Fri Apr 27 22:41:23 2012 (r1524) @@ -1471,7 +1471,7 @@ .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -3395,7 +3395,7 @@ .page_size = 256, /* OTP: 512B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PROBE, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -5954,7 +5954,7 @@ .model_id = SPANSION_S25FL032A, .total_size = 4096, .page_size = 256, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -6912,7 +6912,7 @@ .total_size = 2048, .page_size = 4 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ .block_erasers = Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/flashrom.c Fri Apr 27 22:41:23 2012 (r1524) @@ -1412,9 +1412,9 @@ void emergency_help_message(void) { msg_gerr("Your flash chip is in an unknown state.\n" - "Get help on IRC at irc.freenode.net (channel #flashrom) or\n" - "mail flashrom(a)flashrom.org with FAILED: your board name in " - "the subject line!\n" + "Get help on IRC at chat.freenode.net (channel #flashrom) or\n" + "mail flashrom(a)flashrom.org with the subject " + "\"FAILED: <your board name>\"!\n" "-------------------------------------------------------------" "------------------\n" "DO NOT REBOOT OR POWEROFF!\n"); Modified: trunk/ich_descriptors.c ============================================================================== --- trunk/ich_descriptors.c Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/ich_descriptors.c Fri Apr 27 22:41:23 2012 (r1524) @@ -193,7 +193,7 @@ uint8_t i; uint8_t nr = desc->content.NR + 1; msg_pdbg2("=== Region Section ===\n"); - if (nr >= 5) { + if (nr > 5) { msg_pdbg2("%s: number of regions too high (%d).\n", __func__, nr); return; @@ -819,7 +819,7 @@ /* region section */ nr = desc->content.NR + 1; - if (nr >= 5) { + if (nr > 5) { msg_pdbg2("%s: number of regions too high (%d) - failed\n", __func__, nr); return ICH_RET_ERR; Modified: trunk/print.c ============================================================================== --- trunk/print.c Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/print.c Fri Apr 27 22:41:23 2012 (r1524) @@ -579,6 +579,7 @@ B("ASRock", "ALiveNF6G-DVI", 1, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL), B("ASRock", "AM2NF6G-VSTA", 1, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL), B("ASRock", "ConRoeXFire-eSATA2", 1, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL), + B("ASRock", "H67M", 0, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASRock", "K7S41", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL), B("ASRock", "K7S41GX", 1, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL), B("ASRock", "K7VT4A+", 0, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"), @@ -632,6 +633,7 @@ B("ASUS", "M3A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), B("ASUS", "M3N78-VM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), B("ASUS", "M4A78-EM", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), + B("ASUS", "M4A785T-M", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/", NULL), B("ASUS", "M4A785TD-M EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), B("ASUS", "M4A785TD-V EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), B("ASUS", "M4A78LT-M LE", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), @@ -640,6 +642,7 @@ B("ASUS", "M4A89GTD PRO", 1, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL), B("ASUS", "M4N78 PRO", 1, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL), B("ASUS", "M5A99X EVO", 1, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL), + B("ASUS", "Maximus IV Extreme", 0, "http://www.asus.com/Motherboards/Intel_Socket_1155/Maximus_IV_Extreme/", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "MEW-AM", 0, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "MEW-VM", 0, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("ASUS", "OPLX-M", 0, NULL, "Untested board enable."), @@ -694,6 +697,7 @@ B("ASUS", "P5PE-VM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL), B("ASUS", "P5QPL-AM", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL), B("ASUS", "P5VD1-X", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL), + B("ASUS", "P5VD2-MX", 1, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD2MX/", "The MAC address of the onboard LAN NIC is stored in flash, hence overwritten by flashrom; see http://www.flashrom.org/pipermail/flashrom/2012-March/009014.html"), B("ASUS", "P6T SE", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL), B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL), B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL), @@ -705,21 +709,29 @@ B("ASUS", "P8H61-M LE/USB3", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H67-M PRO", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8P67 (rev. 3.1)", 0, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8P67 LE", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8Z68-V PRO", 0, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8Z68-V PRO/GEN3", 1, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."), B("ASUS", "TUSL2-C", 0, "http://support.asus.com/download.aspx?SLanguage=en&p=1&s=4&m=TUSL2-C&os=&ha…", "Untested board enable."), B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), B("ASUS", "Z8PE-D12", 1, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), + B("Bachmann", "OT200", 1, "http://www.bachmann.info/produkte/bedien-und-beobachtungsgeraete/operator-t…", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Bifferos", "Bifferboard", 1, "http://bifferos.co.uk/", NULL), - B("Biostar", "N68S3+", 1, NULL, NULL), + B("Biostar", "H61MU3", 0, NULL, "Probing works (Eon EN25Q32(A/B), 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), + B("Biostar", "M7VIQ", 0, NULL, "Missing board enable (W83697HF/F/HG/G), see http://www.flashrom.org/pipermail/flashrom/2012-February/008863.html"), + B("Biostar", "N61PB-M2S", 1, NULL, NULL), + B("Biostar", "N68S3+", 1, NULL, NULL), B("Biostar", "P4M80-M4", 1, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL), B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL), B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark(a)zl2tod.net> to flashrom(a)coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."), B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL), + B("Dell", "Inspiron 580", 0, "http://support.dell.com/support/edocs/systems/insp580/en/index.htm", "Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL), B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL), + B("Dell", "Vostro 460", 0, "http://support.dell.com/support/edocs/systems/vos460/en/index.htm", "Mainboard model is 0Y2MRG. Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?…", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"), B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWin…", NULL), B("Elitegroup", "GeForce6100SM-M ", 1, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&M…", NULL), @@ -734,10 +746,11 @@ B("Elitegroup", "P6VAP-A+", 1, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…", NULL), B("Elitegroup", "RS485M-M", 1, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?Category…", NULL), B("Emerson", "ATCA-7360", 1, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Pr…", NULL), + B("EPoX", "EP-3PTA", 0, NULL, "Missing board enable (W83627HF/F/HG/G), see http://www.flashrom.org/pipermail/flashrom/2012-April/009043.html"), B("EPoX", "EP-8K5A2", 1, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL), B("EPoX", "EP-8NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL), - B("EPoX", "EP-9NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL), B("EPoX", "EP-8RDA3+", 1, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL), + B("EPoX", "EP-9NPA7I", 1, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL), B("EPoX", "EP-BX3", 1, "http://www.epox.com/product.asp?ID=EP-BX3", NULL), B("EVGA", "132-CK-NF78", 1, "http://www.evga.com/articles/385.asp", NULL), B("EVGA", "270-WS-W555-A2 (Classified SR-2)", 1, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL), @@ -747,6 +760,7 @@ B("Foxconn", "P4M800P7MA-RS2", 1, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=…", NULL), B("Freetech", "P6F91i", 1, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), B("Fujitsu-Siemens", "ESPRIMO P5915", 1, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), + B("Fujitsu-Siemens", "CELSIUS W410", 0, "ftp://ftp.ts.fujitsu.com/pub/mainboard-oem-sales/Products/Mainboards/Indust…", "Mainboard model is D3062-A1. Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), B("GIGABYTE", "GA-2761GXDK", 1, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), B("GIGABYTE", "GA-6BXC", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), B("GIGABYTE", "GA-6BXDU", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), @@ -769,6 +783,7 @@ B("GIGABYTE", "GA-965P-DS4", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL), B("GIGABYTE", "GA-EP35-DS3L", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), + B("GIGABYTE", "GA-H61M-D2-B3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3773", NULL), B("GIGABYTE", "GA-EX58-UD4P", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-K8N-SLI", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), B("GIGABYTE", "GA-K8N51GMF", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), @@ -803,6 +818,8 @@ B("HP", "Vectra VL400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), B("HP", "Vectra VL420 SFF", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c000…", NULL), B("HP", "xw4400 (0A68h)", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c007…", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"), + B("HP", "xw6400", 0, NULL, "No chip found, see http://www.flashrom.org/pipermail/flashrom/2012-March/009006.html"), + B("HP", "xw9300", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Missing board enable, see http://www.flashrom.org/pipermail/flashrom/2012-February/008862.html"), B("HP", "xw9400", 1, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", "Boot block is write protected unless the solder points next to F2 are shorted."), B("IBASE", "MB899", 1, "http://www.ibase-i.com.tw/2009/mb899.html", NULL), B("IBM", "x3455", 1, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL), @@ -811,7 +828,9 @@ B("Intel", "D425KT", 0, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/de…", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"), B("Intel", "D865GLC", 0, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"), B("Intel", "DG45ID", 0, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.h…", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), + B("Intel", "DG965OT", 0, NULL, "Probing enables Hardware Sequencing (behind that hides a SST SST25VF080B, 1024 kB, SPI). Parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked (and the platform data region seems to be bogus)."), B("Intel", "DH67CF", 0, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"), + B("Intel", "DN2800MT (Marshalltown)", 0, NULL, "BIOS locked via BIOS_CNTL."), B("Intel", "EP80759", 1, NULL, NULL), B("Intel", "Foxhollow", 1, NULL, "Intel reference board."), B("Intel", "Greencity", 1, NULL, "Intel reference board."), @@ -862,6 +881,7 @@ B("MSI", "MS-7529 (G31TM-P21)", 1, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), B("MSI", "MS-7548 (Aspen-GL8E)", 1, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL), B("MSI", "MS-7596 (785GM-E51)", 1, "http://www.msi.com/product/mb/785GM-E51.html", NULL), + B("MSI", "MS-7597 (GF615M-P33)", 0, NULL, "Missing board enable/SIO support (Fintek F71889), see http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html"), B("MSI", "MS-7599 (870-C45)", 1, "http://www.msi.com/product/mb/870-C45.html", NULL), B("MSI", "MS-7613 (Iona-GL8E)", 0, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&d…", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("MSI", "MS-7635 (H55M-ED55)", 0, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), @@ -870,6 +890,7 @@ B("MSI", "MS-7676 (H67MA-ED55(B3))", 1, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"), B("MSI", "MS-7696 (A75MA-G55)", 1, "http://www.msi.com/product/mb/A75MA-G55.html", NULL), B("MSI", "MS-7698 (E350IA-E45)", 1, "http://www.msi.com/product/mb/E350IA-E45.html", NULL), + B("MSI", "MS-7740 (H61MA-E35(B3))", 1, "http://www.msi.com/product/mb/H61MA-E35--B3-.html", NULL), B("NEC", "PowerMate 2000", 1, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL), B("Nokia", "IP530", 1, NULL, NULL), B("PCCHIPS ", "M598LMR (V9.0)", 1, NULL, NULL), @@ -923,29 +944,30 @@ B("Thomson", "IP1000", 1, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL), B("TriGem", "Anaheim-3", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL), B("TriGem", "Lomita", 1, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL), - B("Tyan", "S5375-1U (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL), B("Tyan", "S1846 (Tsunami ATX)", 1, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL), B("Tyan", "S2466 (Tiger MPX)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL), B("Tyan", "S2498 (Tomcat K7M)", 1, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL), B("Tyan", "S2723 (Tiger i7501)", 1, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL), + B("Tyan", "S2875 (Tiger K8W)", 1, "http://www.tyan.com/archive/products/html/tigerk8w.html", NULL), B("Tyan", "S2881 (Thunder K8SR)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL), - B("Tyan", "S2882 (Thunder K8S Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL), B("Tyan", "S2882-D (Thunder K8SD Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL), + B("Tyan", "S2882 (Thunder K8S Pro)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL), B("Tyan", "S2891 (Thunder K8SRE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL), B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), B("Tyan", "S2912 (Thunder n3600R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL), - B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), + B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), B("Tyan", "S3095 (Tomcat i945GM)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL), B("Tyan", "S3992 (Thunder h2000M)", 1, "http://tyan.com/product_board_detail.aspx?pid=235", NULL), B("Tyan", "S5180 (Toledo i965R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL), B("Tyan", "S5191 (Toledo i3000R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL), B("Tyan", "S5197 (Toledo i3010W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL), - B("Tyan", "S5211 (Toledo i3210W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL), B("Tyan", "S5211-1U (Toledo i3200R)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL), + B("Tyan", "S5211 (Toledo i3210W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL), B("Tyan", "S5220 (Toledo q35T)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL), + B("Tyan", "S5375-1U (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL), B("Tyan", "S5375 (Tempest i5100X)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL), B("Tyan", "S5376 (Tempest i5100W)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."), B("Tyan", "S5377 (Tempest i5100T)", 1, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000…", NULL), @@ -965,9 +987,11 @@ B("VIA", "PC3500G", 1, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL), B("VIA", "VB700X", 1, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_i…", NULL), B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL), - B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), + B("ZOTAC", "GeForce 8200", 1, NULL, NULL), B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), + B("ZOTAC", "nForce 630i Supreme (N73U-Supreme)", 1, NULL, NULL), + B("ZOTAC", "ZBOX AD02 (PLUS)", 1, NULL, NULL), + B("ZOTAC", "ZBOX HD-ID11", 1, NULL, NULL), #endif {}, @@ -986,7 +1010,9 @@ B("HP/Compaq", "nx9005", 0, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"), B("HP/Compaq", "nx9010", 0, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us…", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."), B("IBM/Lenovo", "Thinkpad T40p", 0, "http://www.thinkwiki.org/wiki/Category:T40p", NULL), - B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME and platform are locked."), + B("IBM/Lenovo", "Thinkpad T420", 0, "http://www.thinkwiki.org/wiki/Category:T420", "Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), + B("IBM/Lenovo", "Thinkpad T410s", 0, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), + B("IBM/Lenovo", "Thinkpad X1", 0, "http://www.thinkwiki.org/wiki/Category:X1", "Probing works (ST M25PX64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), B("IBM/Lenovo", "240", 0, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), B("Lenovo", "3000 V100 TF05Cxx", 1, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), #endif Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sun Apr 15 16:09:16 2012 (r1523) +++ trunk/programmer.h Fri Apr 27 22:41:23 2012 (r1524) @@ -527,8 +527,7 @@ int default_spi_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int register_spi_programmer(const struct spi_programmer *programmer); -/* ichspi.c */ -#if CONFIG_INTERNAL == 1 +/* The following enum is needed by ich_descriptor_tool and ich* code. */ enum ich_chipset { CHIPSET_ICH_UNKNOWN, CHIPSET_ICH7 = 7, @@ -537,9 +536,12 @@ CHIPSET_ICH10, CHIPSET_5_SERIES_IBEX_PEAK, CHIPSET_6_SERIES_COUGAR_POINT, - CHIPSET_7_SERIES_PANTHER_POINT + CHIPSET_7_SERIES_PANTHER_POINT, + CHIPSET_8_SERIES_LYNX_POINT }; +/* ichspi.c */ +#if CONFIG_INTERNAL == 1 extern uint32_t ichspi_bbar; int ich_init_spi(struct pci_dev *dev, uint32_t base, void *rcrb, enum ich_chipset ich_generation);

1 0

Support for Intel DH89xxCC PCH
by Sean Mahood 27 Apr '12

27 Apr '12

Hello, I have confirmed that the the following addition to chipset_enable.c will allow the programming of DH89xxCC PCH chips. {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_pch6}, {0x8086, 0x1d41, NT, "Intel", "X79", enable_flash_pch6}, + {0x8086, 0x2310, NT, "Intel", "DH89xxCC", enable_flash_pch6}, {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich_4e}, {0x8086, 0x2420, OK, "Intel", "ICH0", enable_flash_ich_4e}, Similar patches have been made to operating systems: Linux http://groups.google.com/group/linux.kernel/browse_thread/thread/ddfde330d4… FreeBSD http://lists.freebsd.org/pipermail/svn-src-head/2011-January/024584.html I am not sure of the process in which to get this added to the next release, so I thought it wise to post it here. Hope this helps! Sincerely, Sean Mahood

3 2

Winbond W49V002FAP & SST49LF002A probe,read but not erase & write on EPOX EP-3PTA board
by Александр Трубицын 27 Apr '12

27 Apr '12

Hello. I try flashrom on old motherboard EPOX EP-3PTA with PLCC32 socket. It probe & read flash well, but not erase nor write new bios. I try with native Winbond W49V002FAP bios chip & with 2 SST49LF002A. Here output of my script file #!/bin/bash # get information about flash chip & BIOS name="W49V002FAP_on_EPOX_EP-3PTA" sudo /usr/sbin/flashrom -V > $name.V.txt sudo /usr/sbin/flashrom -VVVr $name.flash > $name.Vr.txt sudo /usr/sbin/flashrom -VVVE > $name.VE.txt #try to write bios from another chip SST with serial number 006478394 sudo /usr/sbin/flashrom -VVVw /home/alex/src/flash/006478394.flash > $name.Vw.0064.txt #try to write back native bios sudo /usr/sbin/flashrom -VVVw /home/alex/src/flash/cel800_.flash > $name.Vw.cel8.txt lspci -nnvvxxx > $name.lspci_nnvvxxx.txt superiotool -deV > $name.superiotool.txt

2 1

P8Z68-V-PRO/GEN3 - Confirm Working
by Alpha Geek 27 Apr '12

27 Apr '12

Confirmed working P8Z68-V-PRO/GEN3 works with 0.9.5. WARNING: MAC Address of LOM [Lan on Mainboard] will be overwritten with 0x88,0x88,0x88,0x88,0x87,0x88 in place of real MAC Address. MAC Address is stored in offset 0x1000 - 0x1005 of flashrom image. [verified for BIOS vers 0301, 0402, 3101, 3202]. Editing these addrs, with a MAC address affects the MAC address of the LOM, and remains between power downs. Congrats on being more reliable so far than the ASUS provided tools, which bricked a board. hot-swapping a ROM on another MB and using flashrom v0.9.5 allowed me to fix. Passing on whatever I know as thanks. -Alpha

2 3

AT25DF161 found on the Intel Desktop Board DN2800MT (Marshalltown) not working
by Douglas Miller 27 Apr '12

27 Apr '12

FYI - THANKS! AT25DF161 found on the Intel Desktop Board DN2800MT (Marshalltown) not working. flashrom v0.9.5.2-r1523 on Linux 2.6.30.10-105.2.23.fc11.i686.PAE (i686), built with libpci 3.1.6, GCC 4.4.1 20090725 (Red Hat 4.4.1-2), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 2 usecs, 619M loops per second, 10 myus = 11 us, 100 myus = 107 us, 1000 myus = 1002 us, 10000 myus = 9989 us, 8 myus = 8 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: " " DMI string system-version: " " DMI string baseboard-manufacturer: "Intel Corporation" DMI string baseboard-product-name: "DN2800MT" DMI string baseboard-version: "AAG23738-600" DMI string chassis-type: "Desktop" Found chipset "Intel NM10" with PCI ID 8086:27bc. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0xe WARNING: Setting 0xdc from 0xe to 0xf on NM10 failed. New value is 0xe. Root Complex Register Block address = 0xfed1c000 GCS = 0x61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (reserved) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4240 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x0002461f (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0xeb4150bf (SPID2) 0x1c: 0x0000001d (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0xffff0414 (SPID4) 0x2c: 0xffffff40 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x4be9090f (SPID6) 0x3c: 0x000000f6 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0xffff0000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0606 (PREOP) 0x56: 0x103b (OPTYPE) 0x58: 0x05200302 (OPMENU) 0x5c: 0x0001009f (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: invalid prefetching/caching settings, PROBLEMS, continuing anyway The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Chip status register is 10 Found Atmel flash chip "AT25DF161" (2048 kB, SPI) at physical address 0xffe00000. Ignoring security lockdown (if present) Ignoring status register byte 2 Chip status register is 10 Chip status register: Sector Protection Register Lock (SRPL) is not set Chip status register: Bit 6 is not set Chip status register: Erase/Program Error (EPE) is not set Chip status register: WP# pin (WPP) is not asserted Chip status register: Software Protection Status (SWP): no sectors are protected Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1f, id2 0x4602 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Found Atmel flash chip "AT25DF161" (2048 kB, SPI). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. Restoring MMIO space at 0xb7800070 Restoring PCI config space for 00:1f:0 reg 0xdc Many thanks, - Douglas B. Miller Autani Corporation 7170 Riverwood Drive, Suite B Columbia, Maryland, 21046 Office: (443)-320-2233 (x7123) Fax: (240)-755-0092 doug.miller(a)autani.com <mailto:doug.miller@autani.com> <http://www.autani.com/> ------------------------------------------------------------------------ --------------------------- This electronic message (and any attached document) contains information from Autani Corporation, and is for the sole use of the individual or entity to whom it is addressed and may be privileged, confidential or exempt from disclosure under law. Any other dissemination, distribution or copying of this transmission is strictly prohibited. If you receive this message in error, please notify the sender and destroy all copies of message (and all attached documents) immediately.

2 1

Report: Spansion flash S25FL032A and S25FL016A with ASRock 880GM-LE
by Lur King 27 Apr '12

27 Apr '12

Both Flash parts reads OK. Didn't try write yet as i have to prepare the new binaries. Booting off a windows 98 SE CD, flashrom didn't want to work with FreeDOS (DMI Pipe open error). both reports follow: flashrom v0.9.5.2-r1517 on MS-DOS 7 (i786), built with libpci 3.1.5, GCC 4.3.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 50000 usecs, 1589M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 200000 myus = 210000 us, OK. Initializing internal programmer No coreboot table found. Found chipset "AMD SB7x0/SB8x0/SB9x0" with PCI ID 1002:439d. Enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 NormSpeed is 33 MHz GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SB700 IMC is not active. ROM strap override is not active OK. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Chip status register is 00 Found Spansion flash chip "S25FL032A" (4096 kB, SPI) at physical address 0xffc00000. Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x15, id2 0x15 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x1, id2 0x15 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x1, id2 0x15 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x1, id2 0x15 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x215 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x1, id2 0x15 Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x1e, id2 0x11, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0x1e, id2 0x11, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x1e, id2 0x11, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0x1e, id2 0x11, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x5a, id2 0x76, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Spansion flash chip "S25FL032A" (4096 kB, SPI). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Another report: flashrom v0.9.5.2-r1517 on MS-DOS 7 (i786), built with libpci 3.1.5, GCC 4.3.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 50000 usecs, 1589M loops per second, 10 myus = 0 us, 100 myus = 0 us, 1000 myus = 0 us, 10000 myus = 0 us, 200000 myus = 220000 us, OK. Initializing internal programmer No coreboot table found. Found chipset "AMD SB7x0/SB8x0/SB9x0" with PCI ID 1002:439d. Enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 NormSpeed is 33 MHz GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SB700 IMC is not active. ROM strap override is not active OK. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Chip status register is 00 Found Spansion flash chip "S25FL016A" (2048 kB, SPI) at physical address 0xffe00000. Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x01, id2 0x214 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xd4, id2 0xb2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x30, id2 0x80, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0x30, id2 0x80, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x30, id2 0x80, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0x30, id2 0x80, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x9c, id2 0xf3, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x5d, id2 0x84, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x47, id2 0xf2, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Spansion flash chip "S25FL016A" (2048 kB, SPI). === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done.

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom