On Fri, 27 Apr 2012 23:21:59 +0200 Gurken Papst gurken.papst@gmail.com wrote:
OK, so where do I get these patches and on which version should I apply them? I never got a response from Carl-Daniel on my offer to test the patches (or I missed it), so I was still waiting for those patches. Sorry, if this caused confusion.
ahem. right. sorry :) i guess carldani wanted to complete the generic SIO handling for that SIO. the patch that existed was not enough/complete, but i missed that. i have hacked it into something that might work for your board; the generalization can happen later. i will reply to this mail with two patches. please apply them to SVN HEAD and try to probe and read, but not erase/write yet please.
From: David Borg borg.db@gmail.com
Adds a function to enable the flash interface on w83697xx superio's. Still needs to be hooked up to the superio detection framework though.
Signed-off-by: David Borg borg.db@gmail.com Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- board_enable.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
diff --git a/board_enable.c b/board_enable.c index 31b212a..8f01fc1 100644 --- a/board_enable.c +++ b/board_enable.c @@ -380,6 +380,39 @@ static void w836xx_memw_enable(uint16_t port) w836xx_ext_leave(port); }
+/** + * Enable MEMW# and set ROM size to max. + * Supported chips: + * W83697HF/F/HG, W83697SF/UF/UG + */ +static void w83697xx_memw_enable(uint16_t port) +{ + w836xx_ext_enter(port); + if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */ + if((sio_read(port, 0x2A) & 0xF0) == 0xF0) { + + /* CR24 Bits 7 & 2 must be set to 0 enable the flash ROM */ + /* address segments 000E0000h ~ 000FFFFFh on W83697SF/UF/UG */ + /* These bits are reserved on W83697HF/F/HG */ + /* Shouldn't be needed though. */ + + /* CR28 Bit3 must be set to 1 to enable flash access to */ + /* FFE80000h ~ FFEFFFFFh on W83697SF/UF/UG. */ + /* This bit is reserved on W83697HF/F/HG which default to 0 */ + sio_mask(port, 0x28, 0x08, 0x08); + + /* Enable MEMW# and set ROM size select to max. (4M)*/ + sio_mask(port, 0x24, 0x28, 0x38); + + } else { + msg_perr("WARNING: Flash interface in use by GPIO!\n"); + } + } else { + msg_pinfo("BIOS ROM is disabled\n"); + } + w836xx_ext_leave(port); +} + /* * Suited for: * - EPoX EP-8K5A2: VIA KT333 + VT8235
-
Stefan Tauner