- flashrom - mail.coreboot.org

[commit] r1172 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: hailfinger Date: Wed Sep 15 12:20:16 2010 New Revision: 1172 URL: http://flashrom.org/trac/flashrom/changeset/1172 Log: Delay between probe and subsequent operations. Some flash chips need time to exit ID mode, and while we take care of correct timing for the matching probe, subsequent probes may have totally different timing, and that can lead to garbage responses from the flash chip during the first accesses after the probe sequence is done. Delay 100 ms between the last probe and any subsequent operation. To ensure maximum correctness, we would have to reset the chip first in case the last probe function left the chip in an undefined (non-read) state. That will be possible once struct flashchip has a .reset function. This fixes unstable erase/read/write for some flahs chips on nic3com and possible other use cases as well. Thanks to Maciej Pijanka for reporting the issue and testing patches. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Modified: trunk/cli_classic.c Modified: trunk/cli_classic.c ============================================================================== --- trunk/cli_classic.c Wed Sep 15 02:17:37 2010 (r1171) +++ trunk/cli_classic.c Wed Sep 15 12:20:16 2010 (r1172) @@ -456,5 +456,10 @@ if (write_it && !dont_verify_it) verify_it = 1; + /* FIXME: We should issue an unconditional chip reset here. This can be + * done once we have a .reset function in struct flashchip. + * Give the chip time to settle. + */ + programmer_delay(100000); return doit(flash, force, filename, read_it, write_it, erase_it, verify_it); }

1 0

Fwd: flashrom test on MSI PM8M3-V 4.1
by Shahar Or 15 Sep '10

15 Sep '10

---------- Forwarded message ---------- From: Shahar Or <mightyiampresence(a)gmail.com> Date: Wed, 15 Sep 2010 08:59:02 +0200 Subject: Re: flashrom test on MSI PM8M3-V 4.1 To: Uwe Hermann <uwe(a)hermann-uwe.de> Dear ones, It is the V H, actually. Thanks for noticing. Blessings, Shahar On 9/15/10, Uwe Hermann <uwe(a)hermann-uwe.de> wrote: > On Sat, Sep 04, 2010 at 11:39:58AM +0000, Shahar Or wrote: >> DMI string system-product-name: "MS-7211" > [...] >> SUCCESS. >> COMPLETE. >> Verifying flash... VERIFIED. > > Look good, thanks, we marked the "MSI MS-7211 (PM8M3-V)" as tested. > Just to make sure, you have the "PM8M3-V", not the "PM8M3-V H", right? > > > Thanks, Uwe. > -- > http://hermann-uwe.de | http://sigrok.org > http://randomprojects.org | http://unmaintained-free-software.org > -- Sent from my mobile device -- Sent from my mobile device

1 0

[PATCH] New chip IDs
by Carl-Daniel Hailfinger 15 Sep '10

15 Sep '10

Sorry for the totally meaningless subject. I wanted to get the current state of one of my ID-collection trees out there. Maybe someone finds it useful. The patch is WIP, but hey... if parts of it are mergeable, even better. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-newchips/flashchips.c =================================================================== --- flashrom-newchips/flashchips.c (Revision 1171) +++ flashrom-newchips/flashchips.c (Arbeitskopie) @@ -1335,6 +1335,8 @@ .read = spi_chip_read, }, +/* The AT25F512, AT25F1024 and AT25F2048 apparently support a 0x62 chip erase? */ + { .vendor = "Atmel", .name = "AT25F512B", Index: flashrom-newchips/flashchips.h =================================================================== --- flashrom-newchips/flashchips.h (Revision 1171) +++ flashrom-newchips/flashchips.h (Arbeitskopie) @@ -58,12 +58,15 @@ #define AM_29F400BT 0x23 #define AM_29F800BB 0x58 #define AM_29F800BT 0xD6 +#define AMD_AM29LV001B 0x6D +#define AMD_AM29LV001T 0xED #define AM_29LV002BB 0xC2 #define AM_29LV002BT 0x40 #define AM_29LV004BB 0xB6 #define AM_29LV004BT 0xB5 #define AM_29LV008BB 0x37 #define AM_29LV008BT 0x3E +#define AMD_AM29LV010 0x6E #define AM_29LV040B 0x4F #define AM_29LV080B 0x38 /* Same as Am29LV081B */ #define AM_29LV200BB 0xBF @@ -121,14 +124,21 @@ #define AT_25DF641 0x4800 #define AT_25DQ161 0x8600 #define AT25F512 /* No device ID found in datasheet. Vendor ID - * can be read with AT25F512A_RDID */ + * can be read with AT25F512A_RDID. + * ID is 0x65??? + */ #define AT_25F512A 0x65 /* Needs AT25F512A_RDID */ #define AT_25F512B 0x6500 #define AT25F1024 /* No device ID found in datasheet. Vendor ID - * can be read with AT25F512A_RDID */ + * can be read with AT25F512A_RDID. + * ID is 0x60 or 0x40??? + */ #define AT_25F1024A 0x60 /* Needs AT25F512A_RDID */ +#define ATMEL_AT25F2048 0x63 /* Special RDID */ #define AT_25FS010 0x6601 #define AT_25FS040 0x6604 +#define ATMEL_AT25DF021 0x4300 +#define ATMEL_AT25DF041 0x4401 #define AT_26DF041 0x4400 #define AT_26DF081 0x4500 /* guessed, no datasheet available */ #define AT_26DF081A 0x4501 @@ -136,6 +146,8 @@ #define AT_26DF161A 0x4601 #define AT_26DF321 0x4700 /* Same as 25DF321 */ #define AT_26F004 0x0400 +#define ATMEL_AT29LV512 0x3D +#define ATMEL_AT29LV010A 0x35 /* Same as AT29BV010A? */ #define AT_29C040A 0xA4 #define AT_29C010A 0xD5 #define AT_29C020 0xDA @@ -166,7 +178,11 @@ #define AT_45DB321D 0x2701 /* Buggy data sheet */ #define AT_45DB642 /* No ID available */ #define AT_45DB642D 0x2800 -#define AT_49BV512 0x03 +#define AT_49BV512 0x03 /* Same as AT49F512? */ +#define ATMEL_AT49F001 0x05 +#define ATMEL_AT49F001T 0x04 +#define ATMEL_AT49F010 0x87 +#define ATMEL_AT49LV010 0x17 /* Same as AT49BV010? */ #define AT_49F020 0x0B #define AT_49F002N 0x07 /* for AT49F002(N) */ #define AT_49F002NT 0x08 /* for AT49F002(N)T */ @@ -360,6 +376,7 @@ */ #define PMC_ID 0x7F9D /* PMC */ #define PMC_ID_NOPREFIX 0x9D /* PMC, missing 0x7F prefix */ +#define PMC_PM25LD512 0x20 /* Uses PMC_ID instead of the usual PMC_ID_NOPREFIX */ #define PMC_25LV512 0x7B #define PMC_25LV010 0x7C #define PMC_25LV020 0x7D @@ -412,9 +429,9 @@ #define SST_25WF010 0x2502 #define SST_25WF020 0x2503 #define SST_25WF040 0x2504 -#define SST_25VF512A_REMS 0x48 /* REMS or RES opcode */ +#define SST_25VF512A_REMS 0x48 /* REMS or RES opcode, also SST25VF512? */ #define SST_25VF010_REMS 0x49 /* REMS or RES opcode */ -#define SST_25VF020_REMS 0x43 /* REMS or RES opcode */ +#define SST_25VF020_REMS 0x43 /* REMS or RES opcode, also SST25LF020? */ #define SST_25VF040_REMS 0x44 /* REMS or RES opcode, same as SST25LF040A */ #define SST_25VF040B 0x258D #define SST_25VF040B_REMS 0x8D /* REMS or RES opcode */ @@ -434,6 +451,7 @@ #define SST_27VF020 0xAA #define SST_28SF040 0x04 #define SST_29EE512 0x5D +#define SST_29LE512 0x3D /* Same as SST29VE512 */ #define SST_29EE010 0x07 #define SST_29LE010 0x08 /* Same as SST29VE010 */ #define SST_29EE020A 0x10 /* Same as SST29EE020 */ @@ -451,6 +469,7 @@ #define SST_39VF020 0xD6 /* Same as 39LF020 */ #define SST_39VF040 0xD7 /* Same as 39LF040 */ #define SST_39VF080 0xD8 /* Same as 39LF080/39VF080/39VF088 */ +#define SST_45VF010 0x42 /* FIXME */ #define SST_49LF040B 0x50 #define SST_49LF040 0x51 #define SST_49LF020 0x61 @@ -469,10 +488,11 @@ /* * ST25P chips are SPI, first byte of device ID is memory type, second * byte of device ID is related to log(bitsize) at least for some chips. + * ST is now called Numonyx. */ #define ST_ID 0x20 /* ST / SGS/Thomson */ #define ST_M25P05A 0x2010 -#define ST_M25P05_RES 0x10 /* Same code as M25P10. */ +#define ST_M25P05_RES 0x10 /* Same code as M25P10. Datasheet error? Should be 0x05? */ #define ST_M25P10A 0x2011 #define ST_M25P10_RES 0x10 /* Same code as M25P05. */ #define ST_M25P20 0x2012 @@ -530,6 +550,9 @@ #define SM_MVC_29C51002B 0xA2 /* Identical chips: {F,S,V}29C51002B */ #define SM_MVC_29C51004B 0xA3 /* Identical chips: {F,S,V}29C51004B */ +#define TENX_ID_NOPREFIX 0x5E /* Tenx Technologies, 0x7F7F5E */ +#define TENX_ICE25P05 0x01 /* Maybe? */ + #define TI_ID 0x97 /* Texas Instruments */ #define TI_OLD_ID 0x01 /* TI chips from last century */ #define TI_TMS29F002RT 0xB0 @@ -540,10 +563,10 @@ * byte of device ID is related to log(bitsize). */ #define WINBOND_NEX_ID 0xEF /* Winbond (ex Nexcom) serial flashes */ -#define WINBOND_NEX_W25X10 0x3011 -#define WINBOND_NEX_W25X20 0x3012 -#define WINBOND_NEX_W25X40 0x3013 -#define WINBOND_NEX_W25X80 0x3014 +#define WINBOND_NEX_W25X10 0x3011 /* W25X10A? */ +#define WINBOND_NEX_W25X20 0x3012 /* W25X20A? */ +#define WINBOND_NEX_W25X40 0x3013 /* W25X40A? */ +#define WINBOND_NEX_W25X80 0x3014 /* W25X80A? */ #define WINBOND_NEX_W25X16 0x3015 #define WINBOND_NEX_W25X32 0x3016 #define WINBOND_NEX_W25X64 0x3017 @@ -565,7 +588,7 @@ #define WINBOND_W19B323MT 0x13 #define WINBOND_W19B324MB 0x97 #define WINBOND_W19B324MT 0x16 -#define WINBOND_W29C010 0xC1 /* Same as W29C010M, W29C011A, W29EE011, W29EE012, and ASD AE29F1008 */ +#define WINBOND_W29C010 0xC1 /* Same as W29C010M, W29C011A, W29EE011, W29EE012, and ASD AE29F1008 (is there a W29C011?) */ #define WINBOND_W29C020 0x45 /* Same as W29C020C, W29C022 and ASD AE29F2008 */ #define WINBOND_W29C040 0x46 /* Same as W29C040P */ #define WINBOND_W29C512A 0xC8 /* Same as W29EE512 */ -- http://www.hailfinger.org/

1 0

[PATCH] SPI bitbanging: request/release bus
by Carl-Daniel Hailfinger 15 Sep '10

15 Sep '10

SPI bitbanging on devices which speak SPI natively has a dual-use problem: We need to shut down normal SPI operations to do the bitbanging ourselves. Once we're done, it makes a lot of sense to reenable "normal" SPI operations again. Add request_bus/release_bus functions to struct bitbang_spi_master. Add a bitbang shutdown function (not used yet). Change MCP SPI and Intel NIC SPI to use the new request/release bus infrastructure. There are multiple possible strategies for bus request/release: - Request at the start of a SPI command, release immediately afterwards. - Request at the start of a SPI multicommand, release once all commands of the multicommand are done. - Request on programmer init, release on shutdown. Each strategy has its own advantages. For now, we will stay with the first strategy which worked fine so far. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-bitbang_spi_init_errorcheck_request_release_bus/bitbang_spi.c =================================================================== --- flashrom-bitbang_spi_init_errorcheck_request_release_bus/bitbang_spi.c (Revision 1164) +++ flashrom-bitbang_spi_init_errorcheck_request_release_bus/bitbang_spi.c (Arbeitskopie) @@ -53,6 +53,18 @@ return bitbang_spi_master->get_miso(); } +static void bitbang_spi_request_bus(void) +{ + if (bitbang_spi_master->request_bus) + bitbang_spi_master->request_bus(); +} + +static void bitbang_spi_release_bus(void) +{ + if (bitbang_spi_master->release_bus) + bitbang_spi_master->release_bus(); +} + int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod) { /* BITBANG_SPI_INVALID is 0, so if someone forgot to initialize ->type, @@ -61,19 +73,44 @@ */ if (!master || master->type == BITBANG_SPI_INVALID || !master->set_cs || !master->set_sck || !master->set_mosi || !master->get_miso) { - msg_perr("Incomplete bitbanging SPI master setting! Please " - "report a bug at flashrom(a)flashrom.org\n"); + msg_perr("Incomplete SPI bitbang master setting! " + "Please report a bug at flashrom(a)flashrom.org\n"); return 1; } + if (bitbang_spi_master) { + msg_perr("SPI bitbang master already initialized! " + "Please report a bug at flashrom(a)flashrom.org\n"); + return 1; + } + bitbang_spi_master = master; bitbang_spi_half_period = halfperiod; + /* FIXME: Run bitbang_spi_request_bus here or in programmer init? */ bitbang_spi_set_cs(1); bitbang_spi_set_sck(0); bitbang_spi_set_mosi(0); return 0; } +int bitbang_spi_shutdown(const struct bitbang_spi_master *master) +{ + if (!bitbang_spi_master) { + msg_perr("Shutting down an uninitialized SPI bitbang master! " + "Please report a bug at flashrom(a)flashrom.org\n"); + return 1; + } + if (master != bitbang_spi_master) { + msg_perr("Shutting down a mismatched SPI bitbang master! " + "Please report a bug at flashrom(a)flashrom.org\n"); + return 1; + } + + /* FIXME: Run bitbang_spi_release_bus here or per command? */ + bitbang_spi_master = NULL; + return 0; +} + static uint8_t bitbang_spi_readwrite_byte(uint8_t val) { uint8_t ret = 0; @@ -96,6 +133,11 @@ { int i; + /* FIXME: Run bitbang_spi_request_bus here or in programmer init? + * Requesting and releasing the SPI bus is handled in here to allow the + * programmer to use its own SPI engine for native accesses. + */ + bitbang_spi_request_bus(); bitbang_spi_set_cs(0); for (i = 0; i < writecnt; i++) bitbang_spi_readwrite_byte(writearr[i]); @@ -105,6 +147,8 @@ programmer_delay(bitbang_spi_half_period); bitbang_spi_set_cs(1); programmer_delay(bitbang_spi_half_period); + /* FIXME: Run bitbang_spi_release_bus here or in programmer init? */ + bitbang_spi_release_bus(); return 0; } Index: flashrom-bitbang_spi_init_errorcheck_request_release_bus/nicintel_spi.c =================================================================== --- flashrom-bitbang_spi_init_errorcheck_request_release_bus/nicintel_spi.c (Revision 1164) +++ flashrom-bitbang_spi_init_errorcheck_request_release_bus/nicintel_spi.c (Arbeitskopie) @@ -91,20 +91,10 @@ { uint32_t tmp; - /* - * Requesting and releasing the SPI bus is handled in here to allow - * the chipset to use its own SPI engine for native reads. - */ - if (val == 0) - nicintel_request_spibus(); - tmp = pci_mmio_readl(nicintel_spibar + FLA); tmp &= ~(1 << FL_CS); tmp |= (val << FL_CS); pci_mmio_writel(tmp, nicintel_spibar + FLA); - - if (val == 1) - nicintel_release_spibus(); } static void nicintel_bitbang_set_sck(int val) @@ -142,6 +132,8 @@ .set_sck = nicintel_bitbang_set_sck, .set_mosi = nicintel_bitbang_set_mosi, .get_miso = nicintel_bitbang_get_miso, + .request_bus = nicintel_request_spibus, + .release_bus = nicintel_release_spibus, }; int nicintel_spi_init(void) Index: flashrom-bitbang_spi_init_errorcheck_request_release_bus/mcp6x_spi.c =================================================================== --- flashrom-bitbang_spi_init_errorcheck_request_release_bus/mcp6x_spi.c (Revision 1164) +++ flashrom-bitbang_spi_init_errorcheck_request_release_bus/mcp6x_spi.c (Arbeitskopie) @@ -66,18 +66,9 @@ static void mcp6x_bitbang_set_cs(int val) { - /* Requesting and releasing the SPI bus is handled in here to allow the - * chipset to use its own SPI engine for native reads. - */ - if (val == 0) - mcp6x_request_spibus(); - mcp_gpiostate &= ~(1 << MCP6X_SPI_CS); mcp_gpiostate |= (val << MCP6X_SPI_CS); mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530); - - if (val == 1) - mcp6x_release_spibus(); } static void mcp6x_bitbang_set_sck(int val) @@ -106,6 +97,8 @@ .set_sck = mcp6x_bitbang_set_sck, .set_mosi = mcp6x_bitbang_set_mosi, .get_miso = mcp6x_bitbang_get_miso, + .request_bus = mcp6x_request_spibus, + .release_bus = mcp6x_release_spibus, }; int mcp6x_spi_init(int want_spi) Index: flashrom-bitbang_spi_init_errorcheck_request_release_bus/programmer.h =================================================================== --- flashrom-bitbang_spi_init_errorcheck_request_release_bus/programmer.h (Revision 1164) +++ flashrom-bitbang_spi_init_errorcheck_request_release_bus/programmer.h (Arbeitskopie) @@ -131,6 +131,8 @@ void (*set_sck) (int val); void (*set_mosi) (int val); int (*get_miso) (void); + void (*request_bus) (void); + void (*release_bus) (void); }; #if CONFIG_INTERNAL == 1 @@ -443,6 +445,7 @@ /* bitbang_spi.c */ int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod); +int bitbang_spi_shutdown(const struct bitbang_spi_master *master); int bitbang_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int bitbang_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); int bitbang_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); -- http://www.hailfinger.org/

2 3

[commit] r1171 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: hailfinger Date: Wed Sep 15 02:17:37 2010 New Revision: 1171 URL: http://flashrom.org/trac/flashrom/changeset/1171 Log: SPI bitbanging: request/release bus. SPI bitbanging on devices which speak SPI natively has a dual-use problem: We need to shut down normal SPI operations to do the bitbanging ourselves. Once we're done, it makes a lot of sense to reenable "normal" SPI operations again. Add request_bus/release_bus functions to struct bitbang_spi_master. Add a bitbang shutdown function (not used yet). Change MCP SPI and Intel NIC SPI to use the new request/release bus infrastructure. Cosmetic changes to a few error messages (80 column limit). There are multiple possible strategies for bus request/release: - Request at the start of a SPI command, release immediately afterwards. - Request at the start of a SPI multicommand, release once all commands of the multicommand are done. - Request on programmer init, release on shutdown. Each strategy has its own advantages. For now, we will stay with the first strategy which worked fine so far. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/bitbang_spi.c trunk/mcp6x_spi.c trunk/nicintel_spi.c trunk/programmer.h Modified: trunk/bitbang_spi.c ============================================================================== --- trunk/bitbang_spi.c Wed Sep 15 02:13:02 2010 (r1170) +++ trunk/bitbang_spi.c Wed Sep 15 02:17:37 2010 (r1171) @@ -53,6 +53,18 @@ return bitbang_spi_master->get_miso(); } +static void bitbang_spi_request_bus(void) +{ + if (bitbang_spi_master->request_bus) + bitbang_spi_master->request_bus(); +} + +static void bitbang_spi_release_bus(void) +{ + if (bitbang_spi_master->release_bus) + bitbang_spi_master->release_bus(); +} + int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod) { /* BITBANG_SPI_INVALID is 0, so if someone forgot to initialize ->type, @@ -61,19 +73,44 @@ */ if (!master || master->type == BITBANG_SPI_INVALID || !master->set_cs || !master->set_sck || !master->set_mosi || !master->get_miso) { - msg_perr("Incomplete bitbanging SPI master setting! Please " - "report a bug at flashrom(a)flashrom.org\n"); + msg_perr("Incomplete SPI bitbang master setting!\n" + "Please report a bug at flashrom(a)flashrom.org\n"); + return 1; + } + if (bitbang_spi_master) { + msg_perr("SPI bitbang master already initialized!\n" + "Please report a bug at flashrom(a)flashrom.org\n"); return 1; } + bitbang_spi_master = master; bitbang_spi_half_period = halfperiod; + /* FIXME: Run bitbang_spi_request_bus here or in programmer init? */ bitbang_spi_set_cs(1); bitbang_spi_set_sck(0); bitbang_spi_set_mosi(0); return 0; } +int bitbang_spi_shutdown(const struct bitbang_spi_master *master) +{ + if (!bitbang_spi_master) { + msg_perr("Shutting down an uninitialized SPI bitbang master!\n" + "Please report a bug at flashrom(a)flashrom.org\n"); + return 1; + } + if (master != bitbang_spi_master) { + msg_perr("Shutting down a mismatched SPI bitbang master!\n" + "Please report a bug at flashrom(a)flashrom.org\n"); + return 1; + } + + /* FIXME: Run bitbang_spi_release_bus here or per command? */ + bitbang_spi_master = NULL; + return 0; +} + static uint8_t bitbang_spi_readwrite_byte(uint8_t val) { uint8_t ret = 0; @@ -96,6 +133,11 @@ { int i; + /* FIXME: Run bitbang_spi_request_bus here or in programmer init? + * Requesting and releasing the SPI bus is handled in here to allow the + * programmer to use its own SPI engine for native accesses. + */ + bitbang_spi_request_bus(); bitbang_spi_set_cs(0); for (i = 0; i < writecnt; i++) bitbang_spi_readwrite_byte(writearr[i]); @@ -105,6 +147,8 @@ programmer_delay(bitbang_spi_half_period); bitbang_spi_set_cs(1); programmer_delay(bitbang_spi_half_period); + /* FIXME: Run bitbang_spi_release_bus here or in programmer init? */ + bitbang_spi_release_bus(); return 0; } Modified: trunk/mcp6x_spi.c ============================================================================== --- trunk/mcp6x_spi.c Wed Sep 15 02:13:02 2010 (r1170) +++ trunk/mcp6x_spi.c Wed Sep 15 02:17:37 2010 (r1171) @@ -66,18 +66,9 @@ static void mcp6x_bitbang_set_cs(int val) { - /* Requesting and releasing the SPI bus is handled in here to allow the - * chipset to use its own SPI engine for native reads. - */ - if (val == 0) - mcp6x_request_spibus(); - mcp_gpiostate &= ~(1 << MCP6X_SPI_CS); mcp_gpiostate |= (val << MCP6X_SPI_CS); mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530); - - if (val == 1) - mcp6x_release_spibus(); } static void mcp6x_bitbang_set_sck(int val) @@ -106,6 +97,8 @@ .set_sck = mcp6x_bitbang_set_sck, .set_mosi = mcp6x_bitbang_set_mosi, .get_miso = mcp6x_bitbang_get_miso, + .request_bus = mcp6x_request_spibus, + .release_bus = mcp6x_release_spibus, }; int mcp6x_spi_init(int want_spi) Modified: trunk/nicintel_spi.c ============================================================================== --- trunk/nicintel_spi.c Wed Sep 15 02:13:02 2010 (r1170) +++ trunk/nicintel_spi.c Wed Sep 15 02:17:37 2010 (r1171) @@ -91,20 +91,10 @@ { uint32_t tmp; - /* - * Requesting and releasing the SPI bus is handled in here to allow - * the chipset to use its own SPI engine for native reads. - */ - if (val == 0) - nicintel_request_spibus(); - tmp = pci_mmio_readl(nicintel_spibar + FLA); tmp &= ~(1 << FL_CS); tmp |= (val << FL_CS); pci_mmio_writel(tmp, nicintel_spibar + FLA); - - if (val == 1) - nicintel_release_spibus(); } static void nicintel_bitbang_set_sck(int val) @@ -142,6 +132,8 @@ .set_sck = nicintel_bitbang_set_sck, .set_mosi = nicintel_bitbang_set_mosi, .get_miso = nicintel_bitbang_get_miso, + .request_bus = nicintel_request_spibus, + .release_bus = nicintel_release_spibus, }; int nicintel_spi_init(void) Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Wed Sep 15 02:13:02 2010 (r1170) +++ trunk/programmer.h Wed Sep 15 02:17:37 2010 (r1171) @@ -131,6 +131,8 @@ void (*set_sck) (int val); void (*set_mosi) (int val); int (*get_miso) (void); + void (*request_bus) (void); + void (*release_bus) (void); }; #if CONFIG_INTERNAL == 1 @@ -443,6 +445,7 @@ /* bitbang_spi.c */ int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod); +int bitbang_spi_shutdown(const struct bitbang_spi_master *master); int bitbang_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int bitbang_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); int bitbang_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);

1 0

[PATCH] ICH SPI address window for reads
by Carl-Daniel Hailfinger 15 Sep '10

15 Sep '10

ICH SPI has the ability to restrict SPI read/write accesses to a given address range. The low end of the range is configurable by the BIOS (and by flashrom if the BIOS didn't lock down the flash interface), the high end of the range is 0xffffff (2^24-1). This patch checks for an address range restriction and uses the low end of the allowed range as base for SPI reads. A similar workaround for REMS/RES opcodes has been committed in r500. This fixes read on the Intel D945GCLF mainboard where the stock BIOS enforces a restricted address range. Please note that writes need the same fix, but for architectural reasons that fix will be merged once partial write is available. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-ichspi_read_use_min_addr/spi.c =================================================================== --- flashrom-ichspi_read_use_min_addr/spi.c (Revision 1165) +++ flashrom-ichspi_read_use_min_addr/spi.c (Arbeitskopie) @@ -22,6 +22,7 @@ * Contains the generic SPI framework */ +#include <string.h> #include "flash.h" #include "flashchips.h" #include "chipdrivers.h" @@ -207,6 +208,7 @@ int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) { + int addrbase = 0; if (!spi_programmer[spi_controller].read) { msg_perr("%s called, but SPI read is unsupported on this " "hardware. Please report a bug at " @@ -214,7 +216,26 @@ return 1; } - return spi_programmer[spi_controller].read(flash, buf, start, len); + /* Check if the chip fits between lowest valid and highest possible + * address. Highest possible address with the current SPI implementation + * means 0xffffff, the highest unsigned 24bit number. + */ + addrbase = spi_get_valid_read_addr(); + if (addrbase + flash->total_size * 1024 > (1 << 24)) { + msg_perr("Flash chip size exceeds the allowed access window. "); + msg_perr("Read will probably fail.\n"); + /* Try to get the best alignment subject to constraints. */ + addrbase = (1 << 24) - flash->total_size * 1024; + } + /* Check if alignment is native (at least the largest power of two which + * is a factor of the mapped size of the chip). + */ + if (ffs(flash->total_size * 1024) > (ffs(addrbase) ? : 33)) { + msg_perr("Flash chip is not aligned natively in the allowed " + "access window.\n"); + msg_perr("Read will probably return garbage.\n"); + } + return spi_programmer[spi_controller].read(flash, buf, addrbase + start, len); } /* -- http://www.hailfinger.org/

2 2

[commit] r1170 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: hailfinger Date: Wed Sep 15 02:13:02 2010 New Revision: 1170 URL: http://flashrom.org/trac/flashrom/changeset/1170 Log: Honor ICH SPI address window for reads. ICH SPI has the ability to restrict SPI read/write accesses to a given address range. The low end of the range is configurable by the BIOS (and by flashrom if the BIOS didn't lock down the flash interface), the high end of the range is 0xffffff (2^24-1). This patch checks for an address range restriction and uses the low end of the allowed range as base for SPI reads. A similar workaround for REMS/RES opcodes has been committed in r500. This fixes read on the Intel D945GCLF mainboard where the stock BIOS enforces a restricted address range. Please note that writes need the same fix, but for architectural reasons that fix will be merged once partial write is available. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Tested by David Hendricks on the Intel D945GCLF mainboard, results at http://paste.flashrom.org/view.php?id=79 Acked-by: David Hendricks <dhendrix(a)google.com> Modified: trunk/spi.c Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Wed Sep 15 02:03:53 2010 (r1169) +++ trunk/spi.c Wed Sep 15 02:13:02 2010 (r1170) @@ -22,6 +22,7 @@ * Contains the generic SPI framework */ +#include <string.h> #include "flash.h" #include "flashchips.h" #include "chipdrivers.h" @@ -207,6 +208,7 @@ int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) { + int addrbase = 0; if (!spi_programmer[spi_controller].read) { msg_perr("%s called, but SPI read is unsupported on this " "hardware. Please report a bug at " @@ -214,7 +216,26 @@ return 1; } - return spi_programmer[spi_controller].read(flash, buf, start, len); + /* Check if the chip fits between lowest valid and highest possible + * address. Highest possible address with the current SPI implementation + * means 0xffffff, the highest unsigned 24bit number. + */ + addrbase = spi_get_valid_read_addr(); + if (addrbase + flash->total_size * 1024 > (1 << 24)) { + msg_perr("Flash chip size exceeds the allowed access window. "); + msg_perr("Read will probably fail.\n"); + /* Try to get the best alignment subject to constraints. */ + addrbase = (1 << 24) - flash->total_size * 1024; + } + /* Check if alignment is native (at least the largest power of two which + * is a factor of the mapped size of the chip). + */ + if (ffs(flash->total_size * 1024) > (ffs(addrbase) ? : 33)) { + msg_perr("Flash chip is not aligned natively in the allowed " + "access window.\n"); + msg_perr("Read will probably return garbage.\n"); + } + return spi_programmer[spi_controller].read(flash, buf, addrbase + start, len); } /*

1 0

[commit] r1169 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: uwe Date: Wed Sep 15 02:03:53 2010 New Revision: 1169 URL: http://flashrom.org/trac/flashrom/changeset/1169 Log: Add missing GIGABYTE GA-7DXR entry, should have been in r1166. Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/print.c Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Sep 15 01:56:56 2010 (r1168) +++ trunk/print.c Wed Sep 15 02:03:53 2010 (r1169) @@ -412,6 +412,7 @@ B("GIGABYTE", "GA-6ZMA", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL), B("GIGABYTE", "GA-MA785GMT-UD2H", 1, "http://www.gigabyte.de/Products/Motherboard/Products_Overview.aspx?ProductI…", NULL), B("GIGABYTE", "GA-770TA-UD3", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=3272#ov", NULL), + B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.de/Products/Motherboard/Products_Spec.aspx?ProductID=13…", NULL), B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL), B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),

1 0

[PATCH] Winbond chip id fix-up (ver 4)
by Mattias Mattsson 15 Sep '10

15 Sep '10

Same as version 3, but do not rearrange order of chip definitions in flashchips.c for easier review. List all chip variants in the .name strings in flashchips.c Also have two identical entries for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012 with different probe functions in flashchips.c as sometimes (for newer revisions of these chips?) the standard jedec probe seems to work. Eg see test report here: http://patchwork.coreboot.org/patch/1476/ Rename constants W_nnnn -> WINBOND_Wnnnn W_25nnn -> WINBOND_NEX_W25nnn Kill incorrect ASD chip and vendor id. Group Winbond SPI and Parallell chips separately (they have different vendor ids). Change constant names to the "canonical" chip name for the following ids: W_29C020C (0x45) -> WINBOND_W29C020 (Same as W29C020C, W29C022 and ASD AE29F2008) W_29C040P (0x46) -> WINBOND_W29C040 ("P" is for package type [32-pin PLCC], irrelevant) W_29C011 + W_29EE011 (0xC1) -> WINBOND_W29C010M (Same as W29C011A, W29EE011, W29EE012, and ASD AE29F1008) Also add ids for the following Winbond chips: W25Q40 W25Q128 W19B160BB W19B160BT W19B320SB/W19L320SB W19B320ST/W19L320ST W19B322MB W19B322MT W19B323MB W19B323MT W19B324MB W19B324MT W29C512A/W29EE512 W39L010 W39L040A W39L512 W49F002/W49F002B Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 3

[commit] r1168 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: mhm Date: Wed Sep 15 01:56:56 2010 New Revision: 1168 URL: http://flashrom.org/trac/flashrom/changeset/1168 Log: Rename constants W_nnnn -> WINBOND_Wnnnn W_25nnn -> WINBOND_NEX_W25nnn Kill incorrect ASD chip and vendor id. Group Winbond SPI and parallel chips separately (they have different vendor IDs). Change constant names to the "canonical" chip name for the following ids: W_29C020C (0x45) -> WINBOND_W29C020 (Same as W29C020C, W29C022 and ASD AE29F2008) W_29C040P (0x46) -> WINBOND_W29C040 ("P" is for package type [32-pin PLCC], irrelevant) W_29C011 + W_29EE011 (0xC1) -> WINBOND_W29C010 (Same as W29C010M, W29C011A, W29EE011, W29EE012, and ASD AE29F1008) List all chip variants in the .name strings in flashchips.c Have two identical entries for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012 but with different probe functions in flashchips.c as sometimes (for newer revisions of these chips?) the standard jedec probe seems to work. E.g. see test report here: http://patchwork.coreboot.org/patch/1476/ Also add ids for the following Winbond chips: W25Q40 W25Q128 W19B160BB W19B160BT W19B320SB/W19L320SB W19B320ST/W19L320ST W19B322MB W19B322MT W19B323MB W19B323MT W19B324MB W19B324MT W29C512A/W29EE512 W39L010 W39L040A W39L512 W49F002/W49F002B Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Sep 15 01:20:35 2010 (r1167) +++ trunk/flashchips.c Wed Sep 15 01:56:56 2010 (r1168) @@ -1003,37 +1003,6 @@ }, { - .vendor = "ASD", - .name = "AE49F2008", - .bustype = CHIP_BUSTYPE_PARALLEL, - .manufacture_id = ASD_ID, - .model_id = ASD_AE49F2008, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - { .vendor = "Atmel", .name = "AT25DF021", .bustype = CHIP_BUSTYPE_SPI, @@ -6957,7 +6926,7 @@ .name = "W25Q80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25Q80, + .model_id = WINBOND_NEX_W25Q80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -6993,7 +6962,7 @@ .name = "W25Q16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25Q16, + .model_id = WINBOND_NEX_W25Q16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7029,7 +6998,7 @@ .name = "W25Q32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25Q32, + .model_id = WINBOND_NEX_W25Q32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7065,7 +7034,7 @@ .name = "W25Q64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25Q64, + .model_id = WINBOND_NEX_W25Q64, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7101,7 +7070,7 @@ .name = "W25x10", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X10, + .model_id = WINBOND_NEX_W25X10, .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7131,7 +7100,7 @@ .name = "W25x20", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X20, + .model_id = WINBOND_NEX_W25X20, .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7161,7 +7130,7 @@ .name = "W25x40", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X40, + .model_id = WINBOND_NEX_W25X40, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7191,7 +7160,7 @@ .name = "W25x80", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X80, + .model_id = WINBOND_NEX_W25X80, .total_size = 1024, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7221,7 +7190,7 @@ .name = "W25x16", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X16, + .model_id = WINBOND_NEX_W25X16, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7257,7 +7226,7 @@ .name = "W25x32", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X32, + .model_id = WINBOND_NEX_W25X32, .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7293,7 +7262,7 @@ .name = "W25x64", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = WINBOND_NEX_ID, - .model_id = W_25X64, + .model_id = WINBOND_NEX_W25X64, .total_size = 8192, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, @@ -7326,10 +7295,10 @@ { .vendor = "Winbond", - .name = "W29C011", + .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = W_29C011, + .model_id = WINBOND_W29C010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -7349,10 +7318,10 @@ { .vendor = "Winbond", - .name = "W29C020C", + .name = "W29C020(C)/W29C022", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = W_29C020C, + .model_id = WINBOND_W29C020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -7372,10 +7341,10 @@ { .vendor = "Winbond", - .name = "W29C040P", + .name = "W29C040/P", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = W_29C040P, + .model_id = WINBOND_W29C040, .total_size = 512, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, @@ -7395,10 +7364,10 @@ { .vendor = "Winbond", - .name = "W29EE011", + .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = W_29C011, + .model_id = WINBOND_W29C010, .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, @@ -7421,7 +7390,7 @@ .name = "W39V040A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, - .model_id = W_39V040A, + .model_id = WINBOND_W39V040A, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, @@ -7444,10 +7413,10 @@ { .vendor = "Winbond", - .name = "W39V040B", + .name = "W39V040(F)B", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, - .model_id = W_39V040B, + .model_id = WINBOND_W39V040B, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, @@ -7470,10 +7439,10 @@ { .vendor = "Winbond", - .name = "W39V040C", + .name = "W39V040(F)C", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, - .model_id = W_39V040C, + .model_id = WINBOND_W39V040C, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, @@ -7500,7 +7469,7 @@ .name = "W39V040FA", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, - .model_id = W_39V040FA, + .model_id = WINBOND_W39V040FA, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -7531,7 +7500,7 @@ .name = "W39V080A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, - .model_id = W_39V080A, + .model_id = WINBOND_W39V080A, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_EITHER_RESET, @@ -7554,10 +7523,10 @@ { .vendor = "Winbond", - .name = "W49F002U", + .name = "W49F002U/N", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = W_49F002U, + .model_id = WINBOND_W49F002U, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, @@ -7588,7 +7557,7 @@ .name = "W49F020", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = WINBOND_ID, - .model_id = W_49F020, + .model_id = WINBOND_W49F020, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, @@ -7611,7 +7580,7 @@ .name = "W49V002A", .bustype = CHIP_BUSTYPE_LPC, .manufacture_id = WINBOND_ID, - .model_id = W_49V002A, + .model_id = WINBOND_W49V002A, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, @@ -7642,7 +7611,7 @@ .name = "W49V002FA", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, - .model_id = W_49V002FA, + .model_id = WINBOND_W49V002FA, .total_size = 256, .page_size = 128, .feature_bits = FEATURE_EITHER_RESET, @@ -7673,7 +7642,7 @@ .name = "W39V080FA", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, - .model_id = W_39V080FA, + .model_id = WINBOND_W39V080FA, .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, @@ -7700,7 +7669,7 @@ .name = "W39V080FA (dual mode)", .bustype = CHIP_BUSTYPE_FWH, .manufacture_id = WINBOND_ID, - .model_id = W_39V080FA_DM, + .model_id = WINBOND_W39V080FA_DM, .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Sep 15 01:20:35 2010 (r1167) +++ trunk/flashchips.h Wed Sep 15 01:56:56 2010 (r1168) @@ -110,10 +110,6 @@ #define AMIC_A29L040 0x92 #define AMIC_A49LF040A 0x9d -/* This chip vendor/device ID is probably a misinterpreted LHA header. */ -#define ASD_ID 0x25 /* ASD, not listed in JEP106W */ -#define ASD_AE49F2008 0x52 - #define ATMEL_ID 0x1F /* Atmel */ #define AT_25DF021 0x4300 #define AT_25DF041A 0x4401 @@ -543,35 +539,52 @@ * W25X chips are SPI, first byte of device ID is memory type, second * byte of device ID is related to log(bitsize). */ -#define WINBOND_ID 0xDA /* Winbond */ #define WINBOND_NEX_ID 0xEF /* Winbond (ex Nexcom) serial flashes */ -#define W_25X10 0x3011 -#define W_25X20 0x3012 -#define W_25X40 0x3013 -#define W_25X80 0x3014 -#define W_25X16 0x3015 -#define W_25X32 0x3016 -#define W_25X64 0x3017 -#define W_25Q80 0x4014 -#define W_25Q16 0x4015 -#define W_25Q32 0x4016 -#define W_25Q64 0x4017 -#define W_29C011 0xC1 -#define W_29C020C 0x45 /* Same as W29C020 and ASD AE29F2008 */ -#define W_29C040P 0x46 /* Same as W29C040 */ -#define W_29EE011 0xC1 -#define W_39L020 0xB5 -#define W_39L040 0xB6 -#define W_39V040FA 0x34 -#define W_39V040A 0x3D -#define W_39V040B 0x54 -#define W_39V040C 0x50 -#define W_39V080A 0xD0 -#define W_39V080FA 0xD3 -#define W_39V080FA_DM 0x93 -#define W_49F002U 0x0B -#define W_49F020 0x8C -#define W_49V002A 0xB0 -#define W_49V002FA 0x32 +#define WINBOND_NEX_W25X10 0x3011 +#define WINBOND_NEX_W25X20 0x3012 +#define WINBOND_NEX_W25X40 0x3013 +#define WINBOND_NEX_W25X80 0x3014 +#define WINBOND_NEX_W25X16 0x3015 +#define WINBOND_NEX_W25X32 0x3016 +#define WINBOND_NEX_W25X64 0x3017 +#define WINBOND_NEX_W25Q40 0x4013 +#define WINBOND_NEX_W25Q80 0x4014 +#define WINBOND_NEX_W25Q16 0x4015 +#define WINBOND_NEX_W25Q32 0x4016 +#define WINBOND_NEX_W25Q64 0x4017 +#define WINBOND_NEX_W25Q128 0x4018 + +#define WINBOND_ID 0xDA /* Winbond */ +#define WINBOND_W19B160BB 0x49 +#define WINBOND_W19B160BT 0xC4 +#define WINBOND_W19B320SB 0x2A /* Same as W19L320SB */ +#define WINBOND_W19B320ST 0xBA /* Same as W19L320ST */ +#define WINBOND_W19B322MB 0x92 +#define WINBOND_W19B322MT 0x10 +#define WINBOND_W19B323MB 0x94 +#define WINBOND_W19B323MT 0x13 +#define WINBOND_W19B324MB 0x97 +#define WINBOND_W19B324MT 0x16 +#define WINBOND_W29C010 0xC1 /* Same as W29C010M, W29C011A, W29EE011, W29EE012, and ASD AE29F1008 */ +#define WINBOND_W29C020 0x45 /* Same as W29C020C, W29C022 and ASD AE29F2008 */ +#define WINBOND_W29C040 0x46 /* Same as W29C040P */ +#define WINBOND_W29C512A 0xC8 /* Same as W29EE512 */ +#define WINBOND_W39L010 0x31 +#define WINBOND_W39L020 0xB5 +#define WINBOND_W39L040 0xB6 +#define WINBOND_W39L040A 0xD6 +#define WINBOND_W39L512 0x38 +#define WINBOND_W39V040A 0x3D +#define WINBOND_W39V040FA 0x34 +#define WINBOND_W39V040B 0x54 /* Same as W39V040FB */ +#define WINBOND_W39V040C 0x50 /* Same as W39V040FC */ +#define WINBOND_W39V080A 0xD0 +#define WINBOND_W39V080FA 0xD3 +#define WINBOND_W39V080FA_DM 0x93 /* W39V080FA dual mode */ +#define WINBOND_W49F002 0x25 /* Same as W49F002B */ +#define WINBOND_W49F002U 0x0B /* Same as W49F002N and ASD AE49F2008 */ +#define WINBOND_W49F020 0x8C +#define WINBOND_W49V002A 0xB0 +#define WINBOND_W49V002FA 0x32 #endif /* !FLASHCHIPS_H */

1 0

[commit] r1167 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: uwe Date: Wed Sep 15 01:20:35 2010 New Revision: 1167 URL: http://flashrom.org/trac/flashrom/changeset/1167 Log: Board-enable for the ASUS A7V333. The board-enable is the same as for the ASUS A7V8X, i.e., it raises GP51 on the ITE IT8703F. I verified using a multimeter that this will raise both, WE# and TBL# on the flash chip. All operations successfully tested on hardware. Also renamed board_asus_a7v8x() to it8703f_gpio51_raise(). Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Joshua Roys <roysjosh(a)gmail.com> Modified: trunk/board_enable.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed Sep 15 00:59:39 2010 (r1166) +++ trunk/board_enable.c Wed Sep 15 01:20:35 2010 (r1167) @@ -1689,9 +1689,10 @@ /* * Suited for: + * - ASUS A7V333: VIA KT333 + VT8233A + IT8703F * - ASUS A7V8X: VIA KT400 + VT8235 + IT8703F */ -static int board_asus_a7v8x(void) +static int it8703f_gpio51_raise(void) { uint16_t id, base; uint8_t tmp; @@ -1855,7 +1856,8 @@ {0x8086, 0x2570, 0x1849, 0x2570, 0x8086, 0x24d3, 0x1849, 0x24d0, NULL, NULL, NULL, "ASRock", "775i65G", 0, OK, intel_ich_gpio23_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, "ASUS", "A7V600-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, - {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, + {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, it8703f_gpio51_raise}, + {0x1106, 0x3099, 0x1043, 0x807F, 0x1106, 0x3147, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V333", 0, OK, it8703f_gpio51_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, {0x8086, 0x27A0, 0x1043, 0x1287, 0x8086, 0x27DF, 0x1043, 0x1287, "^A8J", NULL, NULL, "ASUS", "A8Jm", 0, NT, intel_ich_gpio34_raise}, {0x10DE, 0x0260, 0x103c, 0x2a3e, 0x10DE, 0x0264, 0x103c, 0x2a3e, "NAGAMI2L", NULL, NULL, "ASUS", "A8N-LA (Nagami-GL8E)", 0, OK, nvidia_mcp_gpio0_raise}, Modified: trunk/print.c ============================================================================== --- trunk/print.c Wed Sep 15 00:59:39 2010 (r1166) +++ trunk/print.c Wed Sep 15 01:20:35 2010 (r1167) @@ -314,6 +314,7 @@ B("ASUS", "A7N8X Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=wAsRYm41KTp78MFC", NULL), B("ASUS", "A7N8X-E Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=TmQtPJv4jIxmL9C2", NULL), B("ASUS", "A7V133", 1, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL), + B("ASUS", "A7V333", 1, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL), B("ASUS", "A7V400-MX", 1, "http://www.asus.com/product.aspx?P_ID=hORgEHRBDLMfwAwx", NULL), B("ASUS", "A7V600-X", 1, "http://www.asus.com/product.aspx?P_ID=L2XYS0rmtCjeOr4k", NULL), B("ASUS", "A7V8X", 1, "http://www.asus.com/product.aspx?P_ID=qfpaGrAy2kLVo0f2", NULL),

1 0

[PATCH] ASUS A7V333 board-enable
by Uwe Hermann 15 Sep '10

15 Sep '10

See patch. Maybe we should rename board_asus_a7v8x() to it8703f_raise_gp51() or the like, though. lspci, superiotool, or flashrom -w logs attached. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 2

Re: [flashrom] ST M25PX32 and M25PX64 flash chip support
by Uwe Hermann 15 Sep '10

15 Sep '10

On Tue, Sep 14, 2010 at 03:45:03PM +0000, Jason Shriver wrote: > Yes, subsector erase is supported by these flash chips. Thank you for adding that capability to the block_erasers list. > > This change was tested on the Intel greencity and Intel foxhollow customer reference boards. These are Intel reference design boards not commercial motherboards. Thanks, both marked as tested now. I wasn't able to find a "canonical" page at intel.com with some info about the boards, please let us know if such a (public) page exists. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

flashrom result for the AMD 890
by Mark Terranova 15 Sep '10

15 Sep '10

/superiotool$ sudo flashrom -V flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "BIOSTAR Group" DMI string system-product-name: "TA890GXB HD" DMI string system-version: " " DMI string baseboard-manufacturer: "BIOSTAR Group" DMI string baseboard-product-name: "TA890GXB HD" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8721 Found chipset "AMD SB700/SB710/SB750", enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=7, SpiBridgeDisable=1, DropOneClkOnRd=0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK ROM strap override is not active OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... 827M loops per second, 100 myus = 201 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN29F010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x1f, id2 0xa0 Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 00 Chip status register: Status Register Write Disable (SRWD) is not set Chip status register: Bit 6 is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x49, id2 0xa3, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040.REMS, 512 KB: REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x49, id2 0xa3, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x7b, id2 0x85, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x1f, id2 0xa0 Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x4d, id2 0x49, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x49, id2 0xa3, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x49, id2 0xa3, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4d, id2 0x49, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x1f, id2 0xa0 Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x1f, id2 0xa0 Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x49, id2 0xa3 Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x1f, id2 0xa0 Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0x4d, id2 0x49 Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x4d, id2 0x49, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x49, id2 0xa3, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x49, id2 0xa3, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4d, id2 0x49, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1f, id2 0xa0, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Not unmapping zero size at (nil) Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned c2 13. probe_spi_rems: id1 0xc2, id2 0x13 Not unmapping zero size at (nil) === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! ===

3 2

[commit] r1166 - trunk
by repository service 15 Sep '10

15 Sep '10

Author: uwe Date: Wed Sep 15 00:59:39 2010 New Revision: 1166 URL: http://flashrom.org/trac/flashrom/changeset/1166 Log: Another round of board/chip status updates. Mark the following boards as tested: - Intel Foxhollow (reported by Jason Shriver <J.Shriver(a)F5.com>) http://www.flashrom.org/pipermail/flashrom/2010-September/004768.html - Intel Greencity (reported by Jason Shriver <J.Shriver(a)F5.com>) http://www.flashrom.org/pipermail/flashrom/2010-September/004768.html - Tyan S2915-E (Thunder n6650W) (reported by Axel Bergerhoff <axelbergerhoff(a)compuserve.com>) http://www.flashrom.org/pipermail/flashrom/2010-August/004560.html - ASUS Z8NA-D6C (reported by John Wells <jb(a)sourceillustrated.com>) http://www.flashrom.org/pipermail/flashrom/2010-September/004737.html - GIGABYTE GA-7DXR (reported by Uwe Hermann <uwe(a)hermann-uwe.de>) http://www.flashrom.org/pipermail/flashrom/2010-September/004712.html - MSI MS-7211 (PM8M3-V) (reported by Shahar Or <mightyiampresence(a)gmail.com>) http://www.flashrom.org/pipermail/flashrom/2010-September/004612.html - MSI MS-6787 (P4MAM-V/P4MAM-L) (reported by Swift Geek <swiftgeek(a)gmail.com>) Board-enable now marked as tested. http://www.flashrom.org/pipermail/flashrom/2010-September/004687.html Chips: - SST SST25VF016B (reported by Warren Turkal <wt(a)penguintechs.org>) http://www.flashrom.org/pipermail/flashrom/2010-September/004716.html Signed-off-by: Uwe Hermann <uwe(a)hermann-uwe.de> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/board_enable.c trunk/flashchips.c trunk/print.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Tue Sep 14 15:16:01 2010 (r1165) +++ trunk/board_enable.c Wed Sep 15 00:59:39 2010 (r1166) @@ -1908,7 +1908,7 @@ {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)", 0, OK, board_msi_kt4v}, {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio44_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, - {0x1106, 0x3148, 0 , 0 , 0x1106, 0x3177, 0 , 0 , NULL, "msi", "ms6787", "MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 0, NT, w836xx_memw_enable_2e}, + {0x1106, 0x3148, 0 , 0 , 0x1106, 0x3177, 0 , 0 , NULL, "msi", "ms6787", "MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 0, OK, w836xx_memw_enable_2e}, {0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, "MSI", "MS-7005 (651M-L)", 0, OK, board_msi_651ml}, {0x10DE, 0x00E0, 0x1462, 0x0250, 0x10DE, 0x00E1, 0x1462, 0x0250, NULL, NULL, NULL, "MSI", "MS-7025 (K8N Neo2 Platinum)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Sep 14 15:16:01 2010 (r1165) +++ trunk/flashchips.c Wed Sep 15 00:59:39 2010 (r1166) @@ -4778,7 +4778,7 @@ .model_id = SST_25VF016B, .total_size = 2048, .page_size = 256, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = Modified: trunk/print.c ============================================================================== --- trunk/print.c Tue Sep 14 15:16:01 2010 (r1165) +++ trunk/print.c Wed Sep 15 00:59:39 2010 (r1166) @@ -381,6 +381,7 @@ B("ASUS", "P6T SE", 1, "http://www.asus.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E", NULL), B("ASUS", "P6T Deluxe", 1, "http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ", NULL), B("ASUS", "P6T Deluxe V2", 1, "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx", NULL), + B("ASUS", "Z8NA-D6C", 1, "http://www.asus.com/product.aspx?P_ID=k81cpN8uEB01BpQ6", NULL), B("BCOM", "WinNET100", 1, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Biostar", "M6TBA", 0, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe(a)hermann-uwe.de>. May work now."), B("Biostar", "M7NCD Pro", 1, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL), @@ -440,6 +441,8 @@ B("IEI", "PICOe-9452", 1, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&…", NULL), B("Intel", "D201GLY", 1, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL), B("Intel", "EP80759", 1, NULL, NULL), + B("Intel", "Foxhollow", 1, NULL, "Intel reference board."), + B("Intel", "Greencity", 1, NULL, "Intel reference board."), B("Intel", "SE440BX-2", 0, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=De…", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"), B("IWILL", "DK8-HTX", 1, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.as…", NULL), B("Jetway", "J7F4K1G5D-PB", 1, "http://www.jetway.com.tw/jetway/system/productshow2.asp?id=389&proname=J7F4…", NULL), @@ -466,6 +469,7 @@ B("MSI", "MS-7135 (K8N Neo3)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=170", NULL), B("MSI", "MS-7168 (Orion)", 1, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), B("MSI", "MS-7207 (K8NGM2-L)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=224", NULL), + B("MSI", "MS-7211 (PM8M3-V)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=234", NULL), B("MSI", "MS-7236 (945PL Neo3)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1173", NULL), B("MSI", "MS-7253 (K9VGM-V)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=260", NULL), B("MSI", "MS-7255 (P4M890M)", 1, "http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1082", NULL), @@ -518,6 +522,7 @@ B("Tyan", "S2892 (Thunder K8SE)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL), B("Tyan", "S2895 (Thunder K8WE)", 1, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL), B("Tyan", "S2915 (Thunder n6650W)", 1, "http://tyan.com/product_board_detail.aspx?pid=163", NULL), + B("Tyan", "S2915-E (Thunder n6650W)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL), B("Tyan", "S2933 (Thunder n3600S)", 1, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL), B("Tyan", "S3095 (Tomcat i945GM)", 1, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL), B("Tyan", "S3992 (Thunder h2000M)", 1, "http://tyan.com/product_board_detail.aspx?pid=235", NULL),

1 0

Re: [flashrom] [PATCH] MSI MS-6787 board enable
by Michael Karcher 15 Sep '10

15 Sep '10

Am Montag, den 16.08.2010, 16:29 +0400 schrieb Jon Shadow: > Fixed again Thanks for your patch. After a test by "Swift Geek", this is Acked-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Please send your latest iteration of the patch, quoting my Ack and repeating your Sign-off to the flashrom mailing list, so we have everything (patch, Ack, Signoff) in one place. I added flashrom(a)flashrom.org back into Cc:, so if you use reply-to-all, this will hit the list. Regards, Michael Karcher

4 6

flashrom test on MSI PM8M3-V 4.1
by Shahar Or 15 Sep '10

15 Sep '10

Dear ones, The product's page is: http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=234 I've now flashed the latest BIOS update using flashrom. The output of the session is attached. Notice I've done some extra read/writes. I'm here for questioning. I've not rebooted yet, so expect another e-mail from me replying to this, stating whether I've managed to boot this machine (or not! I don't have a spare chip to backup the bios on...) Blessings, Shahar

3 4

GIGABYTE GA-7DXR logs, board works out of the box
by Uwe Hermann 15 Sep '10

15 Sep '10

See logs attached. There are two soldered PLCC32 chips (SST39SF020A) in a Dual-BIOS setup, but only the first chip is tested here of course as flashrom doesn't support Dual-BIOS setups (yet). Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

1 1

SST25VF016B confirmed
by Warren Turkal 15 Sep '10

15 Sep '10

I have included verbose output of a write, a flashrom verify, and a manual verify. Please move the SST25VF016B from untested status to tested. Verbose output of a write (including the erase step): $ ../flashrom/flashrom -p ft2232_spi:type=2232H,port=A -Vw blah.in flashrom v0.9.2-r1158 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100909 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1366M loops per second, 10 myus = 10 us, 100 myus = 98 us, 1000 myus = 976 us, 10000 myus = 9965 us, 4 myus = 6 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H interface A Disable divide-by-5 front stage Set clock divisor SPI clock is 10.000000MHz No loopback of TDI/DO TDO/DI Set data bits Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : none Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000. Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x41 === This flash part has status UNTESTED for operations: ERASE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, 0x001000-0x001fff, 0x002000-0x002fff, 0x003000-0x003fff, 0x004000-0x004fff, 0x005000-0x005fff, 0x006000-0x006fff, 0x007000-0x007fff, 0x008000-0x008fff, 0x009000-0x009fff, 0x00a000-0x00afff, 0x00b000-0x00bfff, 0x00c000-0x00cfff, 0x00d000-0x00dfff, 0x00e000-0x00efff, 0x00f000-0x00ffff, 0x010000-0x010fff, 0x011000-0x011fff, 0x012000-0x012fff, 0x013000-0x013fff, 0x014000-0x014fff, 0x015000-0x015fff, 0x016000-0x016fff, 0x017000-0x017fff, 0x018000-0x018fff, 0x019000-0x019fff, 0x01a000-0x01afff, 0x01b000-0x01bfff, 0x01c000-0x01cfff, 0x01d000-0x01dfff, 0x01e000-0x01efff, 0x01f000-0x01ffff, 0x020000-0x020fff, 0x021000-0x021fff, 0x022000-0x022fff, 0x023000-0x023fff, 0x024000-0x024fff, 0x025000-0x025fff, 0x026000-0x026fff, 0x027000-0x027fff, 0x028000-0x028fff, 0x029000-0x029fff, 0x02a000-0x02afff, 0x02b000-0x02bfff, 0x02c000-0x02cfff, 0x02d000-0x02dfff, 0x02e000-0x02efff, 0x02f000-0x02ffff, 0x030000-0x030fff, 0x031000-0x031fff, 0x032000-0x032fff, 0x033000-0x033fff, 0x034000-0x034fff, 0x035000-0x035fff, 0x036000-0x036fff, 0x037000-0x037fff, 0x038000-0x038fff, 0x039000-0x039fff, 0x03a000-0x03afff, 0x03b000-0x03bfff, 0x03c000-0x03cfff, 0x03d000-0x03dfff, 0x03e000-0x03efff, 0x03f000-0x03ffff, 0x040000-0x040fff, 0x041000-0x041fff, 0x042000-0x042fff, 0x043000-0x043fff, 0x044000-0x044fff, 0x045000-0x045fff, 0x046000-0x046fff, 0x047000-0x047fff, 0x048000-0x048fff, 0x049000-0x049fff, 0x04a000-0x04afff, 0x04b000-0x04bfff, 0x04c000-0x04cfff, 0x04d000-0x04dfff, 0x04e000-0x04efff, 0x04f000-0x04ffff, 0x050000-0x050fff, 0x051000-0x051fff, 0x052000-0x052fff, 0x053000-0x053fff, 0x054000-0x054fff, 0x055000-0x055fff, 0x056000-0x056fff, 0x057000-0x057fff, 0x058000-0x058fff, 0x059000-0x059fff, 0x05a000-0x05afff, 0x05b000-0x05bfff, 0x05c000-0x05cfff, 0x05d000-0x05dfff, 0x05e000-0x05efff, 0x05f000-0x05ffff, 0x060000-0x060fff, 0x061000-0x061fff, 0x062000-0x062fff, 0x063000-0x063fff, 0x064000-0x064fff, 0x065000-0x065fff, 0x066000-0x066fff, 0x067000-0x067fff, 0x068000-0x068fff, 0x069000-0x069fff, 0x06a000-0x06afff, 0x06b000-0x06bfff, 0x06c000-0x06cfff, 0x06d000-0x06dfff, 0x06e000-0x06efff, 0x06f000-0x06ffff, 0x070000-0x070fff, 0x071000-0x071fff, 0x072000-0x072fff, 0x073000-0x073fff, 0x074000-0x074fff, 0x075000-0x075fff, 0x076000-0x076fff, 0x077000-0x077fff, 0x078000-0x078fff, 0x079000-0x079fff, 0x07a000-0x07afff, 0x07b000-0x07bfff, 0x07c000-0x07cfff, 0x07d000-0x07dfff, 0x07e000-0x07efff, 0x07f000-0x07ffff, 0x080000-0x080fff, 0x081000-0x081fff, 0x082000-0x082fff, 0x083000-0x083fff, 0x084000-0x084fff, 0x085000-0x085fff, 0x086000-0x086fff, 0x087000-0x087fff, 0x088000-0x088fff, 0x089000-0x089fff, 0x08a000-0x08afff, 0x08b000-0x08bfff, 0x08c000-0x08cfff, 0x08d000-0x08dfff, 0x08e000-0x08efff, 0x08f000-0x08ffff, 0x090000-0x090fff, 0x091000-0x091fff, 0x092000-0x092fff, 0x093000-0x093fff, 0x094000-0x094fff, 0x095000-0x095fff, 0x096000-0x096fff, 0x097000-0x097fff, 0x098000-0x098fff, 0x099000-0x099fff, 0x09a000-0x09afff, 0x09b000-0x09bfff, 0x09c000-0x09cfff, 0x09d000-0x09dfff, 0x09e000-0x09efff, 0x09f000-0x09ffff, 0x0a0000-0x0a0fff, 0x0a1000-0x0a1fff, 0x0a2000-0x0a2fff, 0x0a3000-0x0a3fff, 0x0a4000-0x0a4fff, 0x0a5000-0x0a5fff, 0x0a6000-0x0a6fff, 0x0a7000-0x0a7fff, 0x0a8000-0x0a8fff, 0x0a9000-0x0a9fff, 0x0aa000-0x0aafff, 0x0ab000-0x0abfff, 0x0ac000-0x0acfff, 0x0ad000-0x0adfff, 0x0ae000-0x0aefff, 0x0af000-0x0affff, 0x0b0000-0x0b0fff, 0x0b1000-0x0b1fff, 0x0b2000-0x0b2fff, 0x0b3000-0x0b3fff, 0x0b4000-0x0b4fff, 0x0b5000-0x0b5fff, 0x0b6000-0x0b6fff, 0x0b7000-0x0b7fff, 0x0b8000-0x0b8fff, 0x0b9000-0x0b9fff, 0x0ba000-0x0bafff, 0x0bb000-0x0bbfff, 0x0bc000-0x0bcfff, 0x0bd000-0x0bdfff, 0x0be000-0x0befff, 0x0bf000-0x0bffff, 0x0c0000-0x0c0fff, 0x0c1000-0x0c1fff, 0x0c2000-0x0c2fff, 0x0c3000-0x0c3fff, 0x0c4000-0x0c4fff, 0x0c5000-0x0c5fff, 0x0c6000-0x0c6fff, 0x0c7000-0x0c7fff, 0x0c8000-0x0c8fff, 0x0c9000-0x0c9fff, 0x0ca000-0x0cafff, 0x0cb000-0x0cbfff, 0x0cc000-0x0ccfff, 0x0cd000-0x0cdfff, 0x0ce000-0x0cefff, 0x0cf000-0x0cffff, 0x0d0000-0x0d0fff, 0x0d1000-0x0d1fff, 0x0d2000-0x0d2fff, 0x0d3000-0x0d3fff, 0x0d4000-0x0d4fff, 0x0d5000-0x0d5fff, 0x0d6000-0x0d6fff, 0x0d7000-0x0d7fff, 0x0d8000-0x0d8fff, 0x0d9000-0x0d9fff, 0x0da000-0x0dafff, 0x0db000-0x0dbfff, 0x0dc000-0x0dcfff, 0x0dd000-0x0ddfff, 0x0de000-0x0defff, 0x0df000-0x0dffff, 0x0e0000-0x0e0fff, 0x0e1000-0x0e1fff, 0x0e2000-0x0e2fff, 0x0e3000-0x0e3fff, 0x0e4000-0x0e4fff, 0x0e5000-0x0e5fff, 0x0e6000-0x0e6fff, 0x0e7000-0x0e7fff, 0x0e8000-0x0e8fff, 0x0e9000-0x0e9fff, 0x0ea000-0x0eafff, 0x0eb000-0x0ebfff, 0x0ec000-0x0ecfff, 0x0ed000-0x0edfff, 0x0ee000-0x0eefff, 0x0ef000-0x0effff, 0x0f0000-0x0f0fff, 0x0f1000-0x0f1fff, 0x0f2000-0x0f2fff, 0x0f3000-0x0f3fff, 0x0f4000-0x0f4fff, 0x0f5000-0x0f5fff, 0x0f6000-0x0f6fff, 0x0f7000-0x0f7fff, 0x0f8000-0x0f8fff, 0x0f9000-0x0f9fff, 0x0fa000-0x0fafff, 0x0fb000-0x0fbfff, 0x0fc000-0x0fcfff, 0x0fd000-0x0fdfff, 0x0fe000-0x0fefff, 0x0ff000-0x0fffff, 0x100000-0x100fff, 0x101000-0x101fff, 0x102000-0x102fff, 0x103000-0x103fff, 0x104000-0x104fff, 0x105000-0x105fff, 0x106000-0x106fff, 0x107000-0x107fff, 0x108000-0x108fff, 0x109000-0x109fff, 0x10a000-0x10afff, 0x10b000-0x10bfff, 0x10c000-0x10cfff, 0x10d000-0x10dfff, 0x10e000-0x10efff, 0x10f000-0x10ffff, 0x110000-0x110fff, 0x111000-0x111fff, 0x112000-0x112fff, 0x113000-0x113fff, 0x114000-0x114fff, 0x115000-0x115fff, 0x116000-0x116fff, 0x117000-0x117fff, 0x118000-0x118fff, 0x119000-0x119fff, 0x11a000-0x11afff, 0x11b000-0x11bfff, 0x11c000-0x11cfff, 0x11d000-0x11dfff, 0x11e000-0x11efff, 0x11f000-0x11ffff, 0x120000-0x120fff, 0x121000-0x121fff, 0x122000-0x122fff, 0x123000-0x123fff, 0x124000-0x124fff, 0x125000-0x125fff, 0x126000-0x126fff, 0x127000-0x127fff, 0x128000-0x128fff, 0x129000-0x129fff, 0x12a000-0x12afff, 0x12b000-0x12bfff, 0x12c000-0x12cfff, 0x12d000-0x12dfff, 0x12e000-0x12efff, 0x12f000-0x12ffff, 0x130000-0x130fff, 0x131000-0x131fff, 0x132000-0x132fff, 0x133000-0x133fff, 0x134000-0x134fff, 0x135000-0x135fff, 0x136000-0x136fff, 0x137000-0x137fff, 0x138000-0x138fff, 0x139000-0x139fff, 0x13a000-0x13afff, 0x13b000-0x13bfff, 0x13c000-0x13cfff, 0x13d000-0x13dfff, 0x13e000-0x13efff, 0x13f000-0x13ffff, 0x140000-0x140fff, 0x141000-0x141fff, 0x142000-0x142fff, 0x143000-0x143fff, 0x144000-0x144fff, 0x145000-0x145fff, 0x146000-0x146fff, 0x147000-0x147fff, 0x148000-0x148fff, 0x149000-0x149fff, 0x14a000-0x14afff, 0x14b000-0x14bfff, 0x14c000-0x14cfff, 0x14d000-0x14dfff, 0x14e000-0x14efff, 0x14f000-0x14ffff, 0x150000-0x150fff, 0x151000-0x151fff, 0x152000-0x152fff, 0x153000-0x153fff, 0x154000-0x154fff, 0x155000-0x155fff, 0x156000-0x156fff, 0x157000-0x157fff, 0x158000-0x158fff, 0x159000-0x159fff, 0x15a000-0x15afff, 0x15b000-0x15bfff, 0x15c000-0x15cfff, 0x15d000-0x15dfff, 0x15e000-0x15efff, 0x15f000-0x15ffff, 0x160000-0x160fff, 0x161000-0x161fff, 0x162000-0x162fff, 0x163000-0x163fff, 0x164000-0x164fff, 0x165000-0x165fff, 0x166000-0x166fff, 0x167000-0x167fff, 0x168000-0x168fff, 0x169000-0x169fff, 0x16a000-0x16afff, 0x16b000-0x16bfff, 0x16c000-0x16cfff, 0x16d000-0x16dfff, 0x16e000-0x16efff, 0x16f000-0x16ffff, 0x170000-0x170fff, 0x171000-0x171fff, 0x172000-0x172fff, 0x173000-0x173fff, 0x174000-0x174fff, 0x175000-0x175fff, 0x176000-0x176fff, 0x177000-0x177fff, 0x178000-0x178fff, 0x179000-0x179fff, 0x17a000-0x17afff, 0x17b000-0x17bfff, 0x17c000-0x17cfff, 0x17d000-0x17dfff, 0x17e000-0x17efff, 0x17f000-0x17ffff, 0x180000-0x180fff, 0x181000-0x181fff, 0x182000-0x182fff, 0x183000-0x183fff, 0x184000-0x184fff, 0x185000-0x185fff, 0x186000-0x186fff, 0x187000-0x187fff, 0x188000-0x188fff, 0x189000-0x189fff, 0x18a000-0x18afff, 0x18b000-0x18bfff, 0x18c000-0x18cfff, 0x18d000-0x18dfff, 0x18e000-0x18efff, 0x18f000-0x18ffff, 0x190000-0x190fff, 0x191000-0x191fff, 0x192000-0x192fff, 0x193000-0x193fff, 0x194000-0x194fff, 0x195000-0x195fff, 0x196000-0x196fff, 0x197000-0x197fff, 0x198000-0x198fff, 0x199000-0x199fff, 0x19a000-0x19afff, 0x19b000-0x19bfff, 0x19c000-0x19cfff, 0x19d000-0x19dfff, 0x19e000-0x19efff, 0x19f000-0x19ffff, 0x1a0000-0x1a0fff, 0x1a1000-0x1a1fff, 0x1a2000-0x1a2fff, 0x1a3000-0x1a3fff, 0x1a4000-0x1a4fff, 0x1a5000-0x1a5fff, 0x1a6000-0x1a6fff, 0x1a7000-0x1a7fff, 0x1a8000-0x1a8fff, 0x1a9000-0x1a9fff, 0x1aa000-0x1aafff, 0x1ab000-0x1abfff, 0x1ac000-0x1acfff, 0x1ad000-0x1adfff, 0x1ae000-0x1aefff, 0x1af000-0x1affff, 0x1b0000-0x1b0fff, 0x1b1000-0x1b1fff, 0x1b2000-0x1b2fff, 0x1b3000-0x1b3fff, 0x1b4000-0x1b4fff, 0x1b5000-0x1b5fff, 0x1b6000-0x1b6fff, 0x1b7000-0x1b7fff, 0x1b8000-0x1b8fff, 0x1b9000-0x1b9fff, 0x1ba000-0x1bafff, 0x1bb000-0x1bbfff, 0x1bc000-0x1bcfff, 0x1bd000-0x1bdfff, 0x1be000-0x1befff, 0x1bf000-0x1bffff, 0x1c0000-0x1c0fff, 0x1c1000-0x1c1fff, 0x1c2000-0x1c2fff, 0x1c3000-0x1c3fff, 0x1c4000-0x1c4fff, 0x1c5000-0x1c5fff, 0x1c6000-0x1c6fff, 0x1c7000-0x1c7fff, 0x1c8000-0x1c8fff, 0x1c9000-0x1c9fff, 0x1ca000-0x1cafff, 0x1cb000-0x1cbfff, 0x1cc000-0x1ccfff, 0x1cd000-0x1cdfff, 0x1ce000-0x1cefff, 0x1cf000-0x1cffff, 0x1d0000-0x1d0fff, 0x1d1000-0x1d1fff, 0x1d2000-0x1d2fff, 0x1d3000-0x1d3fff, 0x1d4000-0x1d4fff, 0x1d5000-0x1d5fff, 0x1d6000-0x1d6fff, 0x1d7000-0x1d7fff, 0x1d8000-0x1d8fff, 0x1d9000-0x1d9fff, 0x1da000-0x1dafff, 0x1db000-0x1dbfff, 0x1dc000-0x1dcfff, 0x1dd000-0x1ddfff, 0x1de000-0x1defff, 0x1df000-0x1dffff, 0x1e0000-0x1e0fff, 0x1e1000-0x1e1fff, 0x1e2000-0x1e2fff, 0x1e3000-0x1e3fff, 0x1e4000-0x1e4fff, 0x1e5000-0x1e5fff, 0x1e6000-0x1e6fff, 0x1e7000-0x1e7fff, 0x1e8000-0x1e8fff, 0x1e9000-0x1e9fff, 0x1ea000-0x1eafff, 0x1eb000-0x1ebfff, 0x1ec000-0x1ecfff, 0x1ed000-0x1edfff, 0x1ee000-0x1eefff, 0x1ef000-0x1effff, 0x1f0000-0x1f0fff, 0x1f1000-0x1f1fff, 0x1f2000-0x1f2fff, 0x1f3000-0x1f3fff, 0x1f4000-0x1f4fff, 0x1f5000-0x1f5fff, 0x1f6000-0x1f6fff, 0x1f7000-0x1f7fff, 0x1f8000-0x1f8fff, 0x1f9000-0x1f9fff, 0x1fa000-0x1fafff, 0x1fb000-0x1fbfff, 0x1fc000-0x1fcfff, 0x1fd000-0x1fdfff, 0x1fe000-0x1fefff, 0x1ff000-0x1fffff, SUCCESS. done. COMPLETE. Verifying flash... VERIFIED. Flashrom verify: $ ../flashrom/flashrom -p ft2232_spi:type=2232H,port=A -Vv blah.in flashrom v0.9.2-r1158 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100909 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1394M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 997 us, 10000 myus = 9986 us, 4 myus = 4 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H interface A Disable divide-by-5 front stage Set clock divisor SPI clock is 10.000000MHz No loopback of TDI/DO TDO/DI Set data bits Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : none Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000. Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x41 === This flash part has status UNTESTED for operations: ERASE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED. Manual verify: Read the rom out with flashrom. Cmp says the infile and outfile are the same. Thanks, wt

2 1

Tyan 2915 and 2915-E --- test report
by Axel Bergerhoff 15 Sep '10

15 Sep '10

Hi, tried several Tyan 2915 (S2915A2NRF) and S2915-E (S2915A2NRF-E) all with the same result. #1 Using flashrom -r to get the PROM's content and comparing that with the appropriate version from Tyan's website gives differences in all cases. #2 Took a 2915 (S2915A2NRF) and flashed with the DOS tool offered by Tyan (phlash16.exe) to BIOS revision 3.00 (2915v300.rom). Then reread with flashrom -r and compared both files - a bunch of differencies again. I attached the outputs of flashrom, lspci, and superiotool for this board. Regards, Axel // ----- * flashrom -V flashrom v0.9.2-r1096 on Linux 2.6.23.13-SMP64 (x86_64), built with libpci 2.2.9, GCC 4.2.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 931M loops per second, 10 myus = 11 us, 100 myus = 110 us, 1000 myus = 1058 us, 10000 myus = 9993 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Tyan Computer Corporation " DMI string system-product-name: "MCP55 " DMI string system-version: "REFERENCE" DMI string baseboard-manufacturer: "Tyan Computer Corporation " DMI string baseboard-product-name: "S2915 " DMI string baseboard-version: "REFERENCE" DMI string chassis-type: "Main Server Chassis" Found chipset "NVIDIA MCP55", enabling flash write... chipset PCI ID is 10de:0364, OK. This chipset supports the following protocols: Non-SPI. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x70, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for AMIC A25L05PT, 64 KB: skipped. Probing for AMIC A25L05PU, 64 KB: skipped. Probing for AMIC A25L10PT, 128 KB: skipped. Probing for AMIC A25L10PU, 128 KB: skipped. Probing for AMIC A25L20PT, 256 KB: skipped. Probing for AMIC A25L20PU, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A25L16PT, 2048 KB: skipped. Probing for AMIC A25L16PU, 2048 KB: skipped. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x70, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0x4e, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0x4e, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x70, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x70, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x70, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF064C, 8192 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Found chip "SST SST49LF080A" (1024 KB, LPC) at physical address 0xfff00000. Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50 Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x70, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x0a, id2 0xc0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No operations were specified. * lspci -nnvvxxx 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 40: f1 10 15 29 08 dc e0 01 22 00 11 11 d0 00 00 00 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8 e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 1c00 [size=128] 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00 10: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: f1 10 15 29 00 00 d0 fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff 70: 10 00 ff ff c5 80 00 00 00 00 44 19 03 80 20 10 80: 09 b0 00 c6 da 12 00 40 ff 00 00 00 ff 00 00 00 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00 a0: 03 00 10 11 00 38 00 00 00 06 8f 06 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 1d 00 fc fd 03 00 30 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at 2000 [size=64] Region 4: I/O ports at 2440 [size=64] Region 5: I/O ports at 2400 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00 10: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 24 00 00 01 24 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00 70: 01 00 00 00 00 00 04 a0 00 00 00 00 01 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 64 15 05 00 a5 21 50 03 80 30 80 00 77 44 44 11 f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00 10: 00 40 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01 40: f1 10 15 29 01 00 02 fe 00 00 00 00 00 00 00 00 50: c0 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 11 Region 0: Memory at a0005000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00 10: 00 50 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01 40: f1 10 15 29 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 04 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 01 00 00 08 80 00 00 00 00 00 00 00 00 b0: 22 11 00 33 44 00 00 00 ff 03 00 00 00 00 00 00 c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 2480 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: AMD_IDE 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 24 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: f1 10 15 29 01 00 02 00 00 00 00 00 00 00 00 00 50: 02 f0 00 00 00 00 00 00 a8 a8 a8 20 2f 00 ff 20 60: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 24d0 [size=8] Region 1: I/O ports at 24c4 [size=4] Region 2: I/O ports at 24c8 [size=8] Region 3: I/O ports at 24c0 [size=4] Region 4: I/O ports at 2490 [size=16] Region 5: Memory at a0006000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00 10: d1 24 00 00 c5 24 00 00 c9 24 00 00 c1 24 00 00 20: 91 24 00 00 00 60 00 a0 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00 50: 0b 68 08 80 00 00 00 00 00 1d 00 00 00 60 09 00 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 80 80: 00 00 00 00 5f de ff fb 00 00 c8 10 ff 7b ff ff 90: 00 00 bf 3d 00 00 00 00 06 00 06 10 7f 03 01 01 a0: 12 0a 00 00 40 00 00 00 00 00 00 00 23 31 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 0a 00 02 03 42 00 00 00 00 00 00 00 00 10 80 00 e0: 0a 00 02 03 42 00 00 00 00 00 00 00 0f 00 70 00 f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 24e8 [size=8] Region 1: I/O ports at 24dc [size=4] Region 2: I/O ports at 24e0 [size=8] Region 3: I/O ports at 24d8 [size=4] Region 4: I/O ports at 24a0 [size=16] Region 5: Memory at a0007000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00 10: e9 24 00 00 dd 24 00 00 e1 24 00 00 d9 24 00 00 20: a1 24 00 00 00 70 00 a0 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00 50: 0b 68 08 80 00 00 00 00 00 1d 00 00 00 60 09 00 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 80 80: 00 00 00 00 ff 3f ff f7 00 00 eb 1c cf ff ff ff 90: 00 00 55 3f 00 00 00 00 06 00 06 10 7f 03 01 01 a0: 12 0a 00 00 40 00 00 00 00 00 00 00 33 31 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 0a 00 02 03 42 00 00 00 00 00 00 00 00 48 20 01 e0: 0a 00 02 03 42 00 00 00 00 00 00 00 0f 00 20 00 f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 17 Region 0: I/O ports at 2800 [size=8] Region 1: I/O ports at 24f4 [size=4] Region 2: I/O ports at 24f8 [size=8] Region 3: I/O ports at 24f0 [size=4] Region 4: I/O ports at 24b0 [size=16] Region 5: Memory at a0008000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00 10: 01 28 00 00 f5 24 00 00 f9 24 00 00 f1 24 00 00 20: b1 24 00 00 00 80 00 a0 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00 50: 0b 68 08 80 00 00 00 00 00 1d 00 00 00 60 09 00 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 80 80: 00 00 00 00 ed fe eb ff 00 00 9f 1a 6e ff 9f ff 90: 00 00 c6 2f 00 00 00 00 06 00 06 10 7f 03 01 01 a0: 12 0a 00 00 40 00 00 00 00 00 00 00 33 31 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 0a 00 02 03 42 00 00 00 00 00 00 00 00 00 00 00 e0: 0a 00 02 03 42 00 00 00 00 00 00 00 00 00 a0 00 f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: a0100000-a01fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+ Capabilities: [b8] Subsystem: nVidia Corporation Unknown device [10de:cb84] Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 02 20: 10 a0 10 a0 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 0a 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00 50: 00 00 fe 9b 00 00 00 00 ff 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 fe 63 02 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00 10: 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05 40: f1 10 15 29 01 50 02 c0 00 00 00 00 01 01 0f 00 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 1273 Region 0: Memory at a0009000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 2808 [size=8] Region 2: Memory at a0005800 (32-bit, non-prefetchable) [size=256] Region 3: Memory at a0005400 (32-bit, non-prefetchable) [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 Vector table: BAR=2 offset=00000000 PBA: BAR=3 offset=00000000 Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+ Address: 00000000fee0f00c Data: 41b9 Masking: 000000fe Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: forcedeth 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00 10: 00 90 00 a0 09 28 00 00 00 58 00 a0 00 54 00 a0 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b9 41 00 00 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00 00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at a000b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 2810 [size=8] Region 2: Memory at a000a000 (32-bit, non-prefetchable) [size=256] Region 3: Memory at a0005c00 (32-bit, non-prefetchable) [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] MSI-X: Enable- Mask- TabSize=8 Vector table: BAR=2 offset=00000000 PBA: BAR=3 offset=00000000 Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: forcedeth 00: de 10 73 03 07 00 b0 00 a3 00 80 06 00 00 00 00 10: 00 b0 00 a0 11 28 00 00 00 a0 00 a0 00 5c 00 a0 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14 40: f1 10 15 29 01 70 02 fe 00 00 00 00 0c 00 00 00 50: 05 6c 86 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4151 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [160] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver 00: de 10 76 03 47 05 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 1f 28 00 00 81 3c 11 05 90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: a0200000-a03fffff Prefetchable memory behind bridge: 00000000a4000000-00000000a40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4159 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [160] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver 00: de 10 78 03 47 05 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 05 00 31 31 00 00 20: 20 a0 30 a0 01 a4 01 a4 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 1f 28 00 00 41 3c 11 02 90: 00 00 41 30 00 00 00 00 c0 01 48 01 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: a1000000-a2ffffff Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4161 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [160] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver 00: de 10 77 03 47 05 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 06 06 00 41 41 00 00 20: 00 a1 f0 a2 01 b0 f1 bf 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0c 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 Capabilities: [a0] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 Capabilities: [c0] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 03 00 02 04 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 10 00 03 00 e4 02 00 00 20 c8 2e 0f 30 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00 90: 36 61 34 01 00 00 00 00 03 00 00 00 00 00 00 00 a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00 b0: 01 0f 11 06 00 00 00 00 03 00 00 00 00 00 00 00 c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00 d0: 69 01 61 01 00 00 7f 00 07 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 63 01 03 00 64 01 01 00 63 02 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00 90: 03 00 c0 00 01 ff cf 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00 b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00 c0: 33 10 00 00 20 40 00 00 03 50 00 00 01 50 00 00 d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00 e0: 03 02 00 7f 13 00 80 ff 44 00 ff e3 74 03 8f e0 f0: 01 64 00 9c 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 01 00 00 00 01 02 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 e0 3d f8 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 60 00 00 00 00 00 00 00 24 aa 67 ef 20 13 82 00 90: 10 28 00 00 6a 80 00 64 39 00 00 80 00 00 00 00 a0: eb 02 00 ef 00 00 00 00 00 00 00 00 00 00 00 00 b0: 27 6e 06 d6 a3 00 00 00 13 31 0e 3f e8 04 e0 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: f2 60 79 bf 32 b5 7f 1b 25 20 63 73 fa 26 6c d4 e0: fb 60 39 df 12 b9 fb 19 33 11 73 5b 7e 36 6c d4 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 f3 20 fe 60: 63 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00 90: 03 00 00 00 4e 00 00 00 00 02 60 02 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 70 6c 1e c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 06 a7 e2 04 10 27 60 20 26 26 25 00 e0: 00 00 00 00 24 1b 66 00 1b 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 13 0f 04 00 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 Capabilities: [a0] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 Capabilities: [c0] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 04 08 01 00 01 01 05 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 11 00 03 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00 90: 6a 01 61 01 00 80 ff 00 07 00 00 00 00 00 00 00 a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00 b0: 36 61 34 01 00 00 00 00 03 00 00 00 00 00 00 00 c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00 d0: 01 0f 11 06 00 00 00 00 03 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 63 01 03 00 64 01 01 00 63 02 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00 90: 03 00 c0 00 01 ff cf 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00 b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00 c0: 33 10 00 00 20 40 00 00 03 50 00 00 01 50 00 00 d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00 e0: 03 02 00 7f 13 00 80 ff 44 00 ff e3 74 03 8f e0 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 01 00 00 00 01 02 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 e0 3d f8 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 60 00 00 00 00 00 00 00 24 aa 67 ef 20 13 82 00 90: 10 28 00 00 6a 80 00 64 39 00 00 80 00 00 00 00 a0: eb 02 00 ef 00 00 00 00 00 00 00 00 00 00 00 00 b0: 98 36 0d d6 a3 00 00 00 18 06 93 a9 ad 4f c0 70 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 8f fe ed 6e 00 99 91 09 a4 a5 87 9b 19 2c 48 11 e0: 56 df 6c e6 00 dd 88 09 b6 a5 c7 cf 15 0d 0c 11 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 60: ff 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00 90: 03 00 00 00 4e 00 00 00 00 02 60 02 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 06 a7 e2 04 10 27 60 20 25 26 26 00 e0: 00 00 00 00 24 1b 66 00 1b 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 13 0f 04 00 01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at a0104000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at a0100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: ohci1394 00: 4c 10 23 80 56 01 10 02 00 10 00 0c 10 40 00 00 10: 00 40 10 a0 00 00 10 a0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00 f0: 10 00 00 00 82 10 00 00 f1 10 15 29 00 00 00 00 03:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=04, subordinate=04, sec-latency=68 I/O behind bridge: 00003000-00003fff Memory behind bridge: a0300000-a03fffff Prefetchable memory behind bridge: 00000000a4000000-00000000a40fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [54] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=03:00.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=32 CommitmentLimit=32 Downstream: Capacity=16 CommitmentLimit=16 Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [100] Advanced Error Reporting <?> 00: 33 10 25 01 47 01 10 00 06 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 03 04 04 44 31 31 20 04 20: 30 a0 30 a0 01 a4 01 a4 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 10 54 71 00 01 00 00 00 00 20 0a 00 81 6c 02 00 50: 00 00 41 00 07 64 c3 00 00 03 00 00 20 00 20 00 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 1f 3f 00 00 00 00 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at a0200000 (64-bit, non-prefetchable) [size=128] Bus: primary=03, secondary=05, subordinate=05, sec-latency=4 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [54] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv Status: Dev=03:00.1 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=32 CommitmentLimit=32 Downstream: Capacity=16 CommitmentLimit=16 Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [7c] Hot-plug capable Capabilities: [100] Advanced Error Reporting <?> 00: 33 10 25 01 47 01 10 00 06 00 04 06 10 00 81 00 10: 04 00 20 a0 00 00 00 00 03 05 05 04 f1 01 20 24 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00 40: 10 54 71 00 01 00 00 00 00 20 00 00 81 6c 02 00 50: 00 00 41 00 07 64 03 00 01 03 00 00 20 00 20 00 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04:09.0 SCSI storage controller [0100]: Adaptec ASC-29320A U320 [9005:8000] (rev 10) Subsystem: Adaptec Unknown device [9005:0060] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 3400 [disabled] [size=256] Region 1: Memory at a0300000 (64-bit, non-prefetchable) [size=8K] Region 3: I/O ports at 3000 [disabled] [size=256] [virtual] Expansion ROM at a4000000 [disabled] [size=512K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [94] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=8 Status: Dev=04:09.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz- Kernel driver in use: aic79xx 00: 05 90 00 80 56 01 30 04 10 00 00 01 10 40 00 00 10: 01 34 00 00 04 00 30 a0 00 00 00 00 01 30 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 05 90 60 00 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 28 19 40: c6 83 00 80 01 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 07 00 42 00 48 04 03 06 00 00 00 00 a0: 05 94 82 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 a0 02 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 06:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [Quadro FX 1500] [10de:029e] (rev a1) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Unknown device [10de:032c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at a2000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at a1000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at 4000 [size=128] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <4us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [128] Power Budgeting <?> Kernel driver in use: nvidia Kernel modules: nvidia 00: de 10 9e 02 47 00 10 00 a1 00 00 03 00 00 00 00 10: 00 00 00 a2 0c 00 00 b0 00 00 00 00 04 00 00 a1 20: 00 00 00 00 01 40 00 00 00 00 00 00 de 10 2c 03 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 10 00 01 00 00 05 00 00 80: 10 28 00 00 01 4d 01 00 08 00 01 11 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 40: f1 10 15 29 08 dc e0 01 22 00 11 11 d0 00 00 00 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00 90: 70 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8 e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge [10de:0361] (rev a3) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at fc00 [size=128] Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K] 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00 10: 01 fc 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: f1 10 15 29 00 00 00 00 fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff 70: 10 00 ff ff 43 00 00 00 00 00 42 20 00 00 00 00 80: 00 00 00 00 00 00 00 00 f0 00 00 01 80 00 00 00 90: 00 00 00 00 00 00 00 00 21 47 95 86 ef cd ab 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 44 00 00 fe fd 73 00 a0 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 80:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3) Subsystem: Tyan Computer Unknown device [10f1:2915] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at 5000 [size=64] Region 4: I/O ports at 5440 [size=64] Region 5: I/O ports at 5400 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00 10: 01 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 54 00 00 01 54 00 00 00 00 00 00 f1 10 15 29 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 f0 00 00 01 f4 00 00 01 f8 00 00 00 00 00 00 70: 01 00 00 00 00 00 04 c0 00 00 00 00 01 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: e6 16 05 00 a5 21 50 03 80 ff f7 00 61 44 44 11 f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00 80:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=80, secondary=81, subordinate=81, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4169 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [160] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver 00: de 10 76 03 47 05 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 80 81 81 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 69 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 1f 28 00 00 81 3c 11 05 90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=80, secondary=82, subordinate=82, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4171 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [160] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver 00: de 10 78 03 47 05 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 80 82 82 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 71 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 1f 28 00 00 41 3c 11 02 90: 00 00 41 10 00 00 00 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=80, secondary=83, subordinate=83, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ Address: 00000000fee0f00c Data: 4179 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel <?> Capabilities: [160] Advanced Error Reporting <?> Kernel driver in use: pcieport-driver 00: de 10 77 03 47 05 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 80 83 83 00 f1 01 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 79 41 00 00 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00 90: 00 00 01 11 00 00 00 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * superiotool -deV superiotool r Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0x0000, rev=0x00 Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x0400, id=0x0081 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x8100, rev=0x1 Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0x8100, rev=0x1 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x8100, rev=0x1 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x8100, rev=0x1 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x8100, rev=0x1 Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0xff, id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e No dump available for this Super I/O No extra registers known for this chip. Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found.

4 7

Asus P4P800-VM
by Mosse 15 Sep '10

15 Sep '10

root@bismuth:/home/thykka# flashrom -V flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M. by More String" DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P4P800-VM" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 766M loops per second, 100 myus = 180 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x6e, id2 0xff, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0xe5, id2 0xea, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xf9, id2 0x8f Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xf9, id2 0x8f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x60 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. No operations were specified. root@bismuth:/home/thykka# lspci -nnvvvxxx 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a5] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] Vendor Specific Information <?> Capabilities: [a0] AGP version 3.0 Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a5 80 30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 02 08 00 40 80 1c 00 00 00 00 00 00 00 00 00 60: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 10 11 11 11 01 33 33 00 00 00 00 00 00 0a 38 00 a0: 02 00 30 00 1b 4a 00 1f 02 0b 00 00 00 00 00 00 b0: 80 00 00 00 30 00 00 00 00 00 32 26 20 10 00 00 c0: 00 00 00 00 00 40 0e 28 00 00 00 00 00 00 00 00 d0: 02 28 04 0e 0b 0d 00 00 00 00 00 00 00 00 30 01 e0: 00 00 00 00 09 a0 06 01 00 02 00 00 00 00 00 00 f0: 00 00 00 00 02 00 00 00 68 0f 03 00 00 00 00 00 00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fc900000-fe9fffff Prefetchable memory behind bridge: d7f00000-f7efffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 71 25 07 01 a0 00 02 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22 20: 90 fc 90 fe f0 d7 e0 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 68 0f 03 00 00 00 00 00 00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K] 00: 86 80 76 25 02 00 80 00 02 00 80 08 00 00 00 00 10: 00 00 cf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 43 65 10 04 00 00 00 00 04 00 00 00 00 00 00 00 50: 01 00 80 00 02 01 80 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 55 05 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 08 00 b0: 00 00 00 00 f0 43 fc 7d 01 00 00 00 09 00 00 00 c0: 00 08 00 00 20 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff 3f e0: 01 00 00 00 00 00 01 02 ff 0e 00 00 00 00 04 00 f0: 00 0c 02 00 00 00 00 00 68 0f 03 00 74 fc 00 00 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at eec0 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: c1 ee 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ef00 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ef20 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 21 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ef40 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 ef 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00 10: 00 f8 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00 60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 80 70: 00 00 cf 3f 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 55 55 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 80 00 00 88 83 40 00 66 0f 05 00 06 14 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 40000000-400fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 40 d0 d0 80 22 20: a0 fe a0 fe 00 40 00 40 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 40: 02 28 30 76 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 64 73 00 00 00 00 00 50 01 34 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 53 31 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 01 00 50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00 60: 8a 8b 85 85 d0 00 00 00 85 80 80 8b 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 38 00 00 00 0d 00 00 00 00 03 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00 e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45 f0: 00 00 64 00 04 00 00 00 66 0f 05 3e 00 00 00 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at efe0 [size=8] Region 1: I/O ports at efac [size=4] Region 2: I/O ports at efa0 [size=8] Region 3: I/O ports at efa8 [size=4] Region 4: I/O ports at ef90 [size=16] Region 5: Memory at 40100000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00: 86 80 db 24 07 00 88 02 02 8f 01 01 00 00 00 00 10: e1 ef 00 00 ad ef 00 00 a1 ef 00 00 a9 ef 00 00 20: 91 ef 00 00 00 00 10 40 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00 40: 77 e3 00 c0 0b 00 00 00 03 00 11 00 00 00 00 00 50: 00 00 00 00 30 30 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80a6] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 04 00 00 00 00 00 00 00 00 00 00 43 10 a6 80 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 5200] [10de:0322] (rev a1) Subsystem: XFX Pine Group Inc. Device [1682:203c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M] [virtual] Expansion ROM at fe9e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Kernel driver in use: nvidia Kernel modules: nvidia-173, nvidiafb, nouveau 00: de 10 22 03 07 00 b0 02 a1 00 00 03 00 f8 00 00 10: 00 00 00 fd 08 00 00 e0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 82 16 3c 20 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01 40: 82 16 3c 20 02 00 30 00 1b 0e 00 1f 02 43 00 1f 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:80f8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at df00 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 Kernel modules: e100 00: 86 80 50 10 17 01 90 02 02 00 00 02 00 40 00 00 10: 00 f0 af fe 01 df 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 f8 80 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe e0: 00 40 00 3a 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 66 0f 05 00 00 00 00 00 02:09.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1076] Subsystem: Intel Corporation Device [8086:1176] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at feac0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at feaa0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at de80 [size=64] Expansion ROM at 40000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Kernel driver in use: e1000 Kernel modules: e1000 00: 86 80 76 10 17 01 30 02 00 00 00 02 04 40 00 00 10: 00 00 ac fe 00 00 aa fe 81 de 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 11 30: 00 00 a8 fe dc 00 00 00 00 00 00 00 0b 01 ff 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 22 c8 e0: 00 20 00 28 07 f0 02 00 00 00 40 00 00 00 00 00 f0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 root@bismuth:/home/thykka# superiotool -deV superiotool r3844 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x42fe, id=0x8482 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x8284, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627THF/THG (id=0x82, rev=0x84) at 0x2e Register dump: idx 20 21 22 23 24 25 26 28 29 2a 2b 2c 2d 2e 2f val 82 84 ff fe 42 00 00 20 00 00 00 00 00 00 ff def 82 NA ff 00 MM 00 MM 00 00 00 MM MM MM 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 03 3a def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 42 def 01 00 60 00 64 01 0c 80 LDN 0x07 (GPIO 1, GPIO 5, game port, MIDI port) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 val 00 02 01 03 30 00 ff ff ff ff ff ff def 00 02 01 03 30 09 ff 00 00 ff 00 00 LDN 0x08 (GPIO 2) idx 30 f0 f1 f2 f3 f4 f5 f6 f7 val 00 ff ff ff 00 ff 00 00 00 def 00 ff 00 00 00 RR 00 00 00 LDN 0x09 (GPIO 3, GPIO 4) idx 30 f0 f1 f2 f3 f4 f5 f6 val 00 ef 4f 00 00 fe 20 00 def 00 ff 00 00 00 ff 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff val 00 00 00 00 f3 02 40 00 00 00 00 8f 3b 00 00 00 00 00 00 def 00 00 00 00 MM MM 00 00 00 00 00 00 00 00 00 00 00 RR RR LDN 0x0b (Hardware monitor) idx 30 60 61 70 val 01 02 90 00 def 00 00 00 00 Hardware monitor (0x0295) Register dump: idx 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2b 2c 2d 2e 2f 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f val 01 ff 01 ff 00 00 00 00 01 01 01 01 3c 3c 0a 0a 01 ff 00 00 00 01 01 3c 42 00 ff ff 24 32 00 e3 57 cb d6 be ff e9 c0 2e 9a 86 f0 00 34 4a b8 2a cb 80 80 06 16 00 4c c0 16 00 0b 40 32 00 00 03 00 00 fe ff 00 00 af 2d 03 01 c4 18 95 06 a3 def RR ff RR ff 00 00 00 00 01 01 01 01 3c 3c 0a 0a RR ff 00 00 00 01 01 3c 43 RR ff ff RR RR NA NA NA NA NA NA NA RR RR NA NA NA NA NA NA NA NA NA NA NA NA NA RR RR RR RR NA NA NA NA NA RR RR 03 00 00 fe ff RR RR 5f NA 03 RR 44 18 15 80 5c LDN 0x00 (Bank 0) idx 50 51 52 53 54 55 56 57 58 59 5d 5e 5f val ff ff 80 ff ff ff 00 80 90 20 84 ff 05 def NA NA NA NA NA NA 00 80 90 70 00 RR RR LDN 0x01 (Bank 1) idx 50 51 52 53 54 55 56 val 37 00 00 4b 00 50 00 def NA NA 00 4b 00 50 00 LDN 0x02 (Bank 2) idx 50 51 52 53 54 55 56 val d0 00 00 4b 00 50 00 def NA NA 00 4b 00 50 00 LDN 0x04 (Bank 4) idx 50 51 52 53 54 55 56 59 5a 5b val 00 13 00 00 fe 0b 00 d6 09 03 def 00 ff RR 00 00 00 00 00 00 00 LDN 0x05 (Bank 5) idx 50 51 52 53 54 55 56 57 val c0 66 00 00 47 55 60 40 def NA NA RR RR NA NA NA NA LDN 0x06 (Bank 6) idx 50 val c8 def RR Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff root@bismuth:/home/thykka# latest official bios: http://dlcdnet.asus.com/pub/ASUS/mb/sock478/p4p800-vm/P4PVM1018.zip

2 3

Re: [flashrom] Tyan Thunder K8WE s2895 with SSTFL49080A flashing report
by Michael Karcher 15 Sep '10

15 Sep '10

(quoted all text for to have it on the list) Am Montag, den 06.09.2010, 00:05 +0200 schrieb STEMMELIN, FREDERIC (FREDERIC)** CTR **: > Hello, > > hope the email address used is the correct one for this kind of > purpose. It indeed is, but we are not allowed to distribute BIOS images, so I (as one of the list moderators) can not pass this mail on to the mailing list. > I am trying to copy my current BIOS flash content into a new flash > chip on Tyan s2895 motherboard. I can read the content of actual SST > flash chip, but cannot write in a new Winbond flash chip. > > So i have two questions for you: > - Is the content of the file > "BIOS_ver106_Tyan_Thunder_K8WE_on_SST-49FL080A_dump_with_flashrom_Vr.bin" a valid BIOS dump (BIOS version 106) ? On the first impression, the dump looks plausible. I would say it is a valid dump. > - Is the winbond chip i used supported ? > (W39V080FAPZ_4521872002_620LDFA) or may be is the flash chip already > dead ? (could be possible, i dont know) The chip is supported, but if I get it right, the SST chip has an LPC interface while the Winbond chip has an FWH interface. This means that you chip doesn't have to be dead, but it is incompatible with your board. > I attached all information that may be usefull for you. I re-attached all unproblematic files to this mail, uncompressed, so that they could be indexed by Google on our www mail archive. > I used latest flashrom version found on official web site. > > Thank you for your time and efforts. > > Have a nice week. > Frédéric Stemmelin Regards, Michael Karcher

2 1

sending flashrom -V as requested
by Ian Bowers 14 Sep '10

14 Sep '10

following is from a Zotac ionitx-a-u . I can provide any other info needed. I'm pretty handy on the ol console, and I like to support open source. flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "To be filled by O.E.M." DMI string baseboard-product-name: "To be filled by O.E.M." DMI string baseboard-version: "To be filled by O.E.M." DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP79", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:0aa2 at 00:03:2 SPI BAR is at 0xfae80000, after clearing low bits BAR is at 0xfae80000 SPI control is 0xc05a, enable=0, idle=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. Calibrating delay loop... 992M loops per second, 100 myus = 198 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically.

1 0

Re: [flashrom] ST M25PX32 and M25PX64 flash chip support
by Uwe Hermann 14 Sep '10

14 Sep '10

On Mon, Sep 13, 2010 at 11:26:25PM +0000, Jason Shriver wrote: > Attached are the test results for the M25PX32 and M25PX64 flash chips. Thanks, patch committed in r1165 with one small change. I added the 0x20 erase block definitions too, the datasheet mentions that Subsector Erase (SSE) via 0x20 command is also possible. Please let me know if that was not the correct thing to do here. Also, could you tell us which mainboard(s) this was tested on, so we can mark them as supported too? Thanks, Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org

2 1

[commit] r1165 - trunk
by repository service 14 Sep '10

14 Sep '10

Author: uwe Date: Tue Sep 14 15:16:01 2010 New Revision: 1165 URL: http://flashrom.org/trac/flashrom/changeset/1165 Log: Add support for ST M25PX32 and M25PX64 flash chips. Probe, read, erase and write have been tested and all are functional. Signed-off-by: Jason Shriver <j.shriver(a)f5.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Tue Sep 14 03:29:49 2010 (r1164) +++ trunk/flashchips.c Tue Sep 14 15:16:01 2010 (r1165) @@ -6114,6 +6114,64 @@ { .vendor = "ST", + .name = "M25PX32", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX32, + .total_size = 4096, + .page_size = 256, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "ST", + .name = "M25PX64", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M25PX64, + .total_size = 8192, + .page_size = 256, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "ST", .name = "M29F002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = ST_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Tue Sep 14 03:29:49 2010 (r1164) +++ trunk/flashchips.h Tue Sep 14 15:16:01 2010 (r1165) @@ -487,6 +487,8 @@ #define ST_M25P32 0x2016 #define ST_M25P64 0x2017 #define ST_M25P128 0x2018 +#define ST_M25PX32 0x7116 +#define ST_M25PX64 0x7117 #define ST_M25PE10 0x8011 #define ST_M25PE20 0x8012 #define ST_M25PE40 0x8013

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom