- flashrom - mail.coreboot.org

DEC Tulip programmer
by Heiko Jehmlich 21 Feb '21

21 Feb '21

Hi flashrom guys, based on the 3COM NIC programmer I created a new one for DEC Tulip Cards. The IC socket on these cards is 28pin so it supports only chips up to 64kB. I tested reading with several 27C256 chips (old 386er BIOSes). Therefore I also created two dumb EPROMS in flashchips. Also I added the ST M29F010B chip, tested on a 3COM NIC. Best regards Heiko Jehmlich diff --git a/Makefile b/Makefile index 6d37d55..af19d25 100644 --- a/Makefile +++ b/Makefile @@ -258,6 +258,11 @@ UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else override CONFIG_NIC3COM = no endif +ifeq ($(CONFIG_NICTULIP), yes) +UNSUPPORTED_FEATURES += CONFIG_NICTULIP=yes +else +override CONFIG_NICTULIP = no +endif ifeq ($(CONFIG_GFXNVIDIA), yes) UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes else @@ -514,6 +519,11 @@ UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else override CONFIG_NIC3COM = no endif +ifeq ($(CONFIG_NICTULIP), yes) +UNSUPPORTED_FEATURES += CONFIG_NICTULIP=yes +else +override CONFIG_NICTULIP = no +endif ifeq ($(CONFIG_NICREALTEK), yes) UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes else @@ -570,6 +580,11 @@ UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else override CONFIG_NIC3COM = no endif +ifeq ($(CONFIG_NICTULIP), yes) +UNSUPPORTED_FEATURES += CONFIG_NICTULIP=yes +else +override CONFIG_NICTULIP = no +endif ifeq ($(CONFIG_GFXNVIDIA), yes) UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes else @@ -699,6 +714,9 @@ CONFIG_PONY_SPI ?= yes # Always enable 3Com NICs for now. CONFIG_NIC3COM ?= yes +# Always enable DECchip NICs for now. +CONFIG_NICTULIP ?= yes + # Enable NVIDIA graphics cards. Note: write and erase do not work properly. CONFIG_GFXNVIDIA ?= yes @@ -826,6 +844,7 @@ endif ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no) override CONFIG_INTERNAL = no override CONFIG_NIC3COM = no +override CONFIG_NICTULIP = no override CONFIG_GFXNVIDIA = no override CONFIG_SATASII = no override CONFIG_ATAHPT = no @@ -954,6 +973,12 @@ PROGRAMMER_OBJS += nic3com.o NEED_LIBPCI += CONFIG_NIC3COM endif +ifeq ($(CONFIG_NICTULIP), yes) +FEATURE_CFLAGS += -D'CONFIG_NICTULIP=1' +PROGRAMMER_OBJS += nictulip.o +NEED_LIBPCI += CONFIG_NICTULIP +endif + ifeq ($(CONFIG_GFXNVIDIA), yes) FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1' PROGRAMMER_OBJS += gfxnvidia.o diff --git a/flashchips.c b/flashchips.c index 6d94a12..1491cdc 100644 --- a/flashchips.c +++ b/flashchips.c @@ -57,6 +57,38 @@ const struct flashchip flashchips[] = { */ { + .vendor = "EPROM", + .name = "27C256", + .bustype = BUS_PARALLEL, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = 0x00, + .total_size = 32, + .page_size = 0, /* unused */ + .feature_bits = 0, + .tested = {.probe = BAD, .read = OK, .erase = BAD, .write = BAD}, + .probe = NULL, + .write = NULL, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "EPROM", + .name = "27C512", + .bustype = BUS_PARALLEL, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = 0x00, + .total_size = 64, + .page_size = 0, /* unused */ + .feature_bits = 0, + .tested = {.probe = BAD, .read = OK, .erase = BAD, .write = BAD}, + .probe = NULL, + .write = NULL, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { .vendor = "AMD", .name = "Am29F002(N)BB", .bustype = BUS_PARALLEL, @@ -14764,6 +14796,33 @@ const struct flashchip flashchips[] = { { .vendor = "ST", + .name = "M29F010B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F010B, + .total_size = 128, + .page_size = 16 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ + .block_erasers = + { + { + .eraseblocks = { {16 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "ST", .name = "M29F040B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, diff --git a/flashchips.h b/flashchips.h index a85fa6a..a3935ce 100644 --- a/flashchips.h +++ b/flashchips.h @@ -838,6 +838,7 @@ #define ST_M50LPW116 0x30 #define ST_M29F002B 0x34 /* Same as M29F002BB */ #define ST_M29F002T 0xB0 /* Same as M29F002BT/M29F002NT/M29F002BNT */ +#define ST_M29F010B 0x20 /* Same as M29F010 */ #define ST_M29F040B 0xE2 /* Same as M29F040 */ #define ST_M29F080 0xF1 #define ST_M29F200BT 0xD3 diff --git a/flashrom.c b/flashrom.c index c89abad..267d0ef 100644 --- a/flashrom.c +++ b/flashrom.c @@ -108,6 +108,18 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_NICTULIP == 1 + { + .name = "nictulip", + .type = PCI, + .devs.dev = nics_tulip, + .init = nictulip_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_NICREALTEK == 1 { /* This programmer works for Realtek RTL8139 and SMC 1211. */ diff --git a/programmer.h b/programmer.h index 29a100b..a9608e0 100644 --- a/programmer.h +++ b/programmer.h @@ -37,6 +37,9 @@ enum programmer { #if CONFIG_NIC3COM == 1 PROGRAMMER_NIC3COM, #endif +#if CONFIG_NICTULIP == 1 + PROGRAMMER_NICTULIP, +#endif #if CONFIG_NICREALTEK == 1 PROGRAMMER_NICREALTEK, #endif @@ -410,6 +413,12 @@ int nic3com_init(void); extern const struct dev_entry nics_3com[]; #endif +/* nictulip.c */ +#if CONFIG_NICTULIP == 1 +int nictulip_init(void); +extern const struct dev_entry nics_tulip[]; +#endif + /* gfxnvidia.c */ #if CONFIG_GFXNVIDIA == 1 int gfxnvidia_init(void); diff --git a/Makefile b/Makefile index 6d37d55..af19d25 100644 --- a/Makefile +++ b/Makefile @@ -258,6 +258,11 @@ UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else override CONFIG_NIC3COM = no endif +ifeq ($(CONFIG_NICTULIP), yes) +UNSUPPORTED_FEATURES += CONFIG_NICTULIP=yes +else +override CONFIG_NICTULIP = no +endif ifeq ($(CONFIG_GFXNVIDIA), yes) UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes else @@ -514,6 +519,11 @@ UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else override CONFIG_NIC3COM = no endif +ifeq ($(CONFIG_NICTULIP), yes) +UNSUPPORTED_FEATURES += CONFIG_NICTULIP=yes +else +override CONFIG_NICTULIP = no +endif ifeq ($(CONFIG_NICREALTEK), yes) UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes else @@ -570,6 +580,11 @@ UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes else override CONFIG_NIC3COM = no endif +ifeq ($(CONFIG_NICTULIP), yes) +UNSUPPORTED_FEATURES += CONFIG_NICTULIP=yes +else +override CONFIG_NICTULIP = no +endif ifeq ($(CONFIG_GFXNVIDIA), yes) UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes else @@ -699,6 +714,9 @@ CONFIG_PONY_SPI ?= yes # Always enable 3Com NICs for now. CONFIG_NIC3COM ?= yes +# Always enable DECchip NICs for now. +CONFIG_NICTULIP ?= yes + # Enable NVIDIA graphics cards. Note: write and erase do not work properly. CONFIG_GFXNVIDIA ?= yes @@ -826,6 +844,7 @@ endif ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no) override CONFIG_INTERNAL = no override CONFIG_NIC3COM = no +override CONFIG_NICTULIP = no override CONFIG_GFXNVIDIA = no override CONFIG_SATASII = no override CONFIG_ATAHPT = no @@ -954,6 +973,12 @@ PROGRAMMER_OBJS += nic3com.o NEED_LIBPCI += CONFIG_NIC3COM endif +ifeq ($(CONFIG_NICTULIP), yes) +FEATURE_CFLAGS += -D'CONFIG_NICTULIP=1' +PROGRAMMER_OBJS += nictulip.o +NEED_LIBPCI += CONFIG_NICTULIP +endif + ifeq ($(CONFIG_GFXNVIDIA), yes) FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1' PROGRAMMER_OBJS += gfxnvidia.o diff --git a/flashchips.c b/flashchips.c index 6d94a12..1491cdc 100644 --- a/flashchips.c +++ b/flashchips.c @@ -57,6 +57,38 @@ const struct flashchip flashchips[] = { */ { + .vendor = "EPROM", + .name = "27C256", + .bustype = BUS_PARALLEL, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = 0x00, + .total_size = 32, + .page_size = 0, /* unused */ + .feature_bits = 0, + .tested = {.probe = BAD, .read = OK, .erase = BAD, .write = BAD}, + .probe = NULL, + .write = NULL, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "EPROM", + .name = "27C512", + .bustype = BUS_PARALLEL, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = 0x00, + .total_size = 64, + .page_size = 0, /* unused */ + .feature_bits = 0, + .tested = {.probe = BAD, .read = OK, .erase = BAD, .write = BAD}, + .probe = NULL, + .write = NULL, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { .vendor = "AMD", .name = "Am29F002(N)BB", .bustype = BUS_PARALLEL, @@ -14764,6 +14796,33 @@ const struct flashchip flashchips[] = { { .vendor = "ST", + .name = "M29F010B", + .bustype = BUS_PARALLEL, + .manufacture_id = ST_ID, + .model_id = ST_M29F010B, + .total_size = 128, + .page_size = 16 * 1024, + .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, + .tested = TEST_OK_PREW, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ + .block_erasers = + { + { + .eraseblocks = { {16 * 1024, 8} }, + .block_erase = erase_sector_jedec, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + .voltage = {4500, 5500}, + }, + + { + .vendor = "ST", .name = "M29F040B", .bustype = BUS_PARALLEL, .manufacture_id = ST_ID, diff --git a/flashchips.h b/flashchips.h index a85fa6a..a3935ce 100644 --- a/flashchips.h +++ b/flashchips.h @@ -838,6 +838,7 @@ #define ST_M50LPW116 0x30 #define ST_M29F002B 0x34 /* Same as M29F002BB */ #define ST_M29F002T 0xB0 /* Same as M29F002BT/M29F002NT/M29F002BNT */ +#define ST_M29F010B 0x20 /* Same as M29F010 */ #define ST_M29F040B 0xE2 /* Same as M29F040 */ #define ST_M29F080 0xF1 #define ST_M29F200BT 0xD3 diff --git a/flashrom.c b/flashrom.c index c89abad..267d0ef 100644 --- a/flashrom.c +++ b/flashrom.c @@ -108,6 +108,18 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_NICTULIP == 1 + { + .name = "nictulip", + .type = PCI, + .devs.dev = nics_tulip, + .init = nictulip_init, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_NICREALTEK == 1 { /* This programmer works for Realtek RTL8139 and SMC 1211. */ diff --git a/programmer.h b/programmer.h index 29a100b..a9608e0 100644 --- a/programmer.h +++ b/programmer.h @@ -37,6 +37,9 @@ enum programmer { #if CONFIG_NIC3COM == 1 PROGRAMMER_NIC3COM, #endif +#if CONFIG_NICTULIP == 1 + PROGRAMMER_NICTULIP, +#endif #if CONFIG_NICREALTEK == 1 PROGRAMMER_NICREALTEK, #endif @@ -410,6 +413,12 @@ int nic3com_init(void); extern const struct dev_entry nics_3com[]; #endif +/* nictulip.c */ +#if CONFIG_NICTULIP == 1 +int nictulip_init(void); +extern const struct dev_entry nics_tulip[]; +#endif + /* gfxnvidia.c */ #if CONFIG_GFXNVIDIA == 1 int gfxnvidia_init(void); diff --git a/nictulip.c b/nictulip.c new file mode 100644 index 0000000..bbea36a --- /dev/null +++ b/nictulip.c @@ -0,0 +1,118 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2021 Heiko Jehmlich <hje(a)jecons.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdlib.h> +#include <unistd.h> +#include "flash.h" +#include "programmer.h" +#include "hwaccess.h" + +#define CSR09 (io_base_addr + 0x48) // Boot ROM, serial ROM, and MII management +#define CSR10 (io_base_addr + 0x50) // Boot ROM programming address +#define CSR13 (io_base_addr + 0x68) // SIA connectivity register + +static uint32_t io_base_addr = 0; +static uint16_t id; + +const struct dev_entry nics_tulip[] = { + + {0x1011, 0x0014, OK, "DEC", "Digital Equipment Corporation DECchip 21041 [Tulip Pass 3]" }, + {0x1011, 0x0009, OK, "DEC", "Digital Equipment Corporation DECchip 21140 [FasterNet]" }, + {0x1011, 0x0019, OK, "DEC", "Digital Equipment Corporation DECchip 21143" }, + + {0}, +}; + +static void nictulip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) +{ + uint32_t dword; + + dword = 0; + dword |= 1 << 13; // WRITE command + dword |= 1 << 12; // select BOOT ROM + dword |= val; // write data + OUTL(dword, CSR09); + + // no idea why we need to add 1 here + dword = (addr & 0x3FFFF) + 1; + OUTL(dword, CSR10); +} + +static uint8_t nictulip_readb(const struct flashctx *flash, const chipaddr addr) +{ + uint32_t dword; + + dword = 0; + dword |= 1 << 14; // READ command + dword |= 1 << 12; // select BOOT ROM + OUTL(dword, CSR09); + + // no idea why we need to add 1 here + dword = (addr & 0x3FFFF) + 1; + OUTL(dword, CSR10); + + return (uint8_t) INL(CSR09) & 0xFF; +} + +static int nictulip_shutdown(void *data) +{ + return 0; +} + +static const struct par_master par_master_nictulip = { + .chip_readb = nictulip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = nictulip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +int nictulip_init(void) +{ + struct pci_dev *dev = NULL; + + if (rget_io_perms()) + return 1; + + dev = pcidev_init(nics_tulip, PCI_BASE_ADDRESS_0); + if (!dev) + return 1; + + io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0); + if (!io_base_addr) + return 1; + + id = dev->device_id; + + if (register_shutdown(nictulip_shutdown, NULL)) + return 1; + + // CSR13 must be 0 before doing any boot ROM access. + OUTL(0, CSR13); + + register_par_master(&par_master_nictulip, BUS_PARALLEL); + return 0; +} + + +#else +#error PCI port I/O access is not supported on this architecture yet. +#endif

1 0

Re: [Bug 1912371] Re: [MIR] flashrom
by Carl-Daniel Hailfinger 16 Feb '21

16 Feb '21

[Adding flashrom mailing list to CC. Context: The Ubuntu bug is about moving flashrom from universe to main. See https://bugs.launchpad.net/ubuntu/+source/flashrom/+bug/1912371/ for details.] If anyone is interested, I can dig up my test scripts which I used to test flashrom, but I do not have any autopkgtest experience. Someone(TM) would have to convert that to autopkgtest format, or we can simply ship selftest scripts to be called from autopkgtest. The amount of testing depends on how much test coverage you want. We can do self-tests with internally emulated hardware or externally emulated hardware or real hardware (the last variant is probably not desirable in a build system). Besides that, flashrom always performs a few self-tests (mostly internal data structure consistency) during startup. The tests have repeatedly caught bugs before a merge when people added new features, but forgot to update all relevant data structures.

2 1

P25Q40H Puya Semiconductor (Shanghai) Co., Ltd
by Jens-Uwe Taebel 15 Feb '21

15 Feb '21

pi@raspberrypi:~ $ flashrom -VV -p buspirate_spi:dev=/dev/ttyUSB0,spispeed=1M flashrom on Linux 5.4.83-v7l+ (armv7l) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.5.2, GCC 8.2.0, little endian Command line (3 args): flashrom -VV -p buspirate_spi:dev=/dev/ttyUSB0,spispeed=1M Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing buspirate_spi programmer Detected Bus Pirate hardware v3.5 Detected Bus Pirate firmware 6.3 ("v6.3-beta1") Using SPI command set v2. SPI speed is 1MHz Raw bitbang mode version 1 Raw SPI mode version 1 The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L05PU, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L10PT, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L10PU, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L20PT, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L20PU, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L40PT, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L40PU, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L80P, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L16PT, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L16PU, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25L032, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25LQ16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for AMIC A25LQ64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF021, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF041A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF321, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF321A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DF641(A), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DL081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DL161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25DQ161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT25FS040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT26DF041, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT26DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT26DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT26DF161A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT26F004, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45CS1282, 16896 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB011D, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB021D, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB041D, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB081D, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB161D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB321C, 4224 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB321D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB321E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel AT45DB642D, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for ESMT F25L008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for ESMT F25L32PA, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B05T, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B10T, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B20T, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B40T, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B80T, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B16T, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B32T, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25B64T, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25P64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25F64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25Q40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25Q80(A), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25Q16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25Q32(A/B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25Q64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25Q128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25QH16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25QH32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25QH64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25QH128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon EN25S64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for ESI ES25P40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for ESI ES25P80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for ESI ES25P16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25LQ40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25LQ80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25LQ16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25LQ32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25LQ64(B), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25LQ128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q20(B), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q40(B), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q80(B), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q16(B), 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q32(B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q64(B), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q128B, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25Q128C, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25T80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25VQ21B, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25VQ40C, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25VQ41B, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25VQ80C, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for GigaDevice GD25VQ16C, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Intel 25F160S33B8, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Intel 25F160S33T8, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Intel 25F320S33B8, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Intel 25F320S33T8, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Intel 25F640S33B8, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Intel 25F640S33T8, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX23L1654, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX23L3254, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX23L6454, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX23L12854, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L1605, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L1635D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L3205(A), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L3273E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L3235D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L6405, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L6405D, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L12805D, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25U1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25U3235E/F, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25U6435E/F, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25U12835F, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix MX25L6495F, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25P128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M45PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M45PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M45PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Nantronics N25S10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Nantronics N25S20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Nantronics N25S40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Nantronics N25S80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Nantronics N25S16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LD256C, 32 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LD512(C), 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LD010(C), 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LD020(C), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LD040(C), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LQ020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LQ040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LQ080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LQ016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LQ032C, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for PMC Pm25LV010A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LV020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LV040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LV080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC Pm25LV016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FU406C/LE25U40CMC, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Sanyo LE25FW203A, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Sanyo LE25FW403A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Spansion S25FL004A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL016A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL032A/P, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL064A/P, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL204K, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL208K, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL132K, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL164K, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL127S-64kB, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL127S-256kB, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL128P......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL128P......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL128S......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL128S......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL129P......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Spansion S25FL129P......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF020B, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25WF020A, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF040B, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25VF080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25VF016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25VF032B, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25VF064C, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST SST25WF080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q40.V, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q80.V, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q16.V, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q32.V, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q64.V, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q128.V, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q20.W, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q40.W, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q80.W, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q16.W, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q32.W, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q64.W, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25Q128.W, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond W25X64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Unknown SFDP-capable chip, 0 kB: SFDP revision = 1.0 SFDP number of parameter headers is 2 (NPH = 1). SFDP parameter table header 0/1: ID 0x00, version 1.0 Length 36 B, Parameter Table Pointer 0x000030 Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 512 kB. Block eraser 0: 128 x 4096 B with opcode 0x20 Tried to add a duplicate block eraser: 128 x 4096 B with opcode 0x20. Block eraser 1: 16 x 32768 B with opcode 0x52 Block eraser 2: 8 x 65536 B with opcode 0xd8 Block eraser 3: 2048 x 256 B with opcode 0x81 done. SFDP parameter table header 1/1: ID 0x85, version 1.0 Length 12 B, Parameter Table Pointer 0x000060 === SFDP has autodetected a flash chip which is not natively supported by flashrom yet. All standard operations (read, verify, erase and write) should work, but to support all possible features we need to add them manually. You can help us by mailing us the output of the following command to flashrom(a)flashrom.org: 'flashrom -VV [plus the -p/--programmer parameter]' Thanks for your help! === Found Unknown flash chip "SFDP-capable chip" (512 kB, SPI) on buspirate_spi. Probing for AMIC unknown AMIC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x81, id2 0x30 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x0, id2 0x0 Found Unknown flash chip "SFDP-capable chip" (512 kB, SPI). No operations were specified. Raw bitbang mode version 1 Bus Pirate shutdown completed. -- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus

2 1

SFDP autodetected flash chip p25q80h
by Michael Kerscher 15 Feb '21

15 Feb '21

Hello, I wanted to read/write a chip "p25q80h" with flashrom and a ch341a programmer and flashrom told me to help you by mailing the attached output to this address to add the chip. If you need more information, feel free to reach out to me. best regards, Michael Kerscher

2 1

Flashrom results report
by Dinko Georgiev 12 Feb '21

12 Feb '21

Hello, I would like to confirm, that flashrom worked successfully on a hot flash with the following details: Donor motherboard: ASUS P5LD2-X/1333 - https://www.asus.com/gr/Motherboards/P5LD2X1333 Chipset: Intel 945GC, Intel ICH7 BIOS chip: Macronix MX25L4005 (512 kB, SPI) Problematic motherboard: AsRock H81 Pro BTC R2.0 - https://www.asrock.com/mb/Intel/H81 Pro BTC R2.0 Chipset: Intel H81 BIOS chip: Winbond W25Q32 (4096 kB, SPI) Special thanks to hell__, who helped me to extract the capsuled UEFI BIOS body. Your software and support are awesome! Best regards, Worldspawn

1 0

how dump FL128SAIH30, manufactured by Alvarion Technologies
by beba beba 06 Feb '21

06 Feb '21

i probly like _030221_1_MHZ.bin -c S25FL128S......1 flashrom v1.0 on Linux 4.4.71+ (armv7l) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.5.2, GCC 6.3.0 20170516, little endian Command line (9 args): ./flashrom -p linux_spi:dev=/dev/spidev2.0,spispeed=1000 -V -o FILE_030221_1MHZ.log -r FLASH_CI_modul_030221_1_MHZ.bin -c S25FL128S......1 Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing linux_spi programmer Using device /dev/spidev2.0 Using 1000 kHz clock The following protocols are supported: SPI. Probing for Spansion S25FL128S......1, 16384 kB: probe_spi_rdid_generic: id1 0x01, id2 0x2018 Found Spansion flash chip "S25FL128S......1" (16384 kB, SPI) on linux_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Program Fail Flag (P_FAIL) is not set Chip status register: Erase Fail Flag (E_FAIL) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done. linaro@tinkerboard:~/flashrom_ci_modul$

2 1

writing? - VIA VL805 SPI Flash Bus
by John Paul Morrison 04 Feb '21

04 Feb '21

I'm trying to write a vendor image to flash using a layout file. It looks like -w expects a full sized flash image even if I'm writing less. Error: Image size (99224 B) doesn't match the flash chip's size (524288 B)! Is that normal? Is there a flag - would -f work and be safe? layout: 0:18397 FW0138a1 flashrom unknown on Linux 4.15.0-130-generic (x86_64) flashrom was built with libpci 3.5.2, GCC 7.5.0, little endian Command line (11 args): ./flashrom -VV --programmer vl805 --layout /home/jmorrison/VL805/firmware/layout --image FW0138a1 -w /home/jmorrison/VL805/firmware/vl805_fw_0138a1.bin -o test6.log romlayout 00000000 - 00018397 named FW0138a1 Using region: "FW0138a1". Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing vl805 programmer Found "VIA VL805" (1106:3483, BDF 01:00.0). === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help!

1 0

Humble request for advice
by sergiy rospysdiyenko 04 Feb '21

04 Feb '21

Greetings! Thanks for creating such wonderful tool. i would like to ask for a suggestion as developers of the tool will be the best one to ask. Basically i am trying to flash efi chip on imac, micronix MX25L6406E/MX25L6408E but just can't get any readings.... i got an working macbook with same chip and once i connect to it, everything works like charm. i was able to read file from working macbook 10 times(8/10 checksum matched!). So i can assume my setup is correct! But no luck reading same chip from imac motherboard. Could you please suggest anything? Could it be that: 1) because chip is on password locked chip is not readable? (doesn't make sense though, right?) 2) maybe chip is faulty? which is very unlikely 3) could it be because chip is on motherboard and unsoldering it would help? 4) i am currently reading chip with sudo flashrom -r oldefi1.bin -V -p linux_spi:dev=/dev/spidev0.0 maybe there is some additional arguments, i should try. Regards, Sergio

3 3

flash chip FM25Q04
by John Paul Morrison 04 Feb '21

04 Feb '21

I added this chip - I think it's working. The dumped image matches the generic spi output. I copied the FM25Q08 and adjusted for size - the Q08 is 8 Mbit and Q04 is 4 Mbit Flashrom didn't detect the chip until I changed probe_spi_rdid to probe_spi_rdid4 - not sure what's up with that. The Q08 uses probe_spi_rdid diff -urw flashrom-vl805/flashchips.c flashrom-vl805-test/flashchips.c --- flashrom-vl805/flashchips.c 2021-02-03 08:47:47.000000000 -0800 +++ flashrom-vl805-test/flashchips.c 2021-02-03 13:39:40.525289552 -0800 @@ -5882,6 +5882,46 @@ { .vendor = "Fudan", + .name = "FM25Q04", + .bustype = BUS_SPI, + .manufacture_id = FUDAN_ID_NOPREFIX, + .model_id = FUDAN_FM25Q04, + .total_size = 512, + .page_size = 256, + /* supports SFDP */ + /* OTP: 1024B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_OK_PR, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, /* 4 KB Sector erase */ + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 16} }, /* 32 KB Block erase */ + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, /* 64 KB Block erase */ + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, /* Chip erase */ + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, /* Chip erase */ + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_bp2_tb_bpl, /* bit6 selects size of protected blocks; TODO: SR2 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Fudan", .name = "FM25Q08", .bustype = BUS_SPI, .manufacture_id = FUDAN_ID_NOPREFIX, diff -urw flashrom-vl805/flashchips.h flashrom-vl805-test/flashchips.h --- flashrom-vl805/flashchips.h 2021-02-03 08:47:47.000000000 -0800 +++ flashrom-vl805-test/flashchips.h 2021-02-03 12:16:51.186815287 -0800 @@ -339,6 +339,7 @@ #define FUDAN_FM25F01 0x3111 #define FUDAN_FM25F02 0x3112 /* Same as FM25F02A */ #define FUDAN_FM25F04 0x3113 /* Same as FM25F04A */ +#define FUDAN_FM25Q04 0x4013 #define FUDAN_FM25Q08 0x4014 #define FUDAN_FM25Q16 0x4015 #define FUDAN_FM25Q32 0x4016 log: flashrom unknown on Linux 4.15.0-130-generic (x86_64) flashrom was built with libpci 3.5.2, GCC 7.5.0, little endian Command line (7 args): ./flashrom -VV --programmer vl805 -r test5.img -o test5.log Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing vl805 programmer Found "VIA VL805" (1106:3483, BDF 01:00.0). === This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output to flashrom(a)flashrom.org if it works for you. Please add the name of your PCI device to the subject. Thank you for your help! === Requested BAR is of type MEM, 64bit, not prefetchable VL805 firmware version 0x00013600 The following protocols are supported: SPI. Probing for AMIC A25L010, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L016, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L020, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L032, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L040, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L05PT, 64 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L05PU, 64 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L080, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L10PT, 128 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L10PU, 128 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L16PT, 2048 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L16PU, 2048 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L20PT, 256 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L20PU, 256 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L40PT, 512 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L40PU, 512 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25L512, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25L80P, 1024 kB: compare_id: id1 0xa1, id2 0x4013 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25LQ16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for AMIC A25LQ64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF021, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF021A, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF041A, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF081, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF081A, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF161, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF321, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF321A, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DF641(A), 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DL081, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DL161, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25DQ161, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25FS040, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25SF041, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25SF081, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25SF161, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25SF321, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT25SL128A, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT26DF041, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT26DF081A, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT26DF161, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT26DF161A, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT26F004, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45CS1282, 16896 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB011D, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB021D, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB041D, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB081D, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB161D, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB321C, 4224 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB321D, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB321E, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Atmel AT45DB642D, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Boya Microelectronics BY25Q128AS, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ESI ES25P16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ESI ES25P40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ESI ES25P80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ESMT F25L008A, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ESMT F25L32PA, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B05, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B05T, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B10T, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B16T, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B20T, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B32T, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B40T, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B64T, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25B80T, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F05, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25F80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P05, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25P80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25Q128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25Q16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25Q32(A/B), 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25Q40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25Q64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25Q80(A), 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25QH128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25QH16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25QH32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25QH64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon EN25S80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25F005, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25F01, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25F02(A), 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25F04(A), 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25Q04, 512 kB: compare_id: id1 0xa1, id2 0x4013 Found Fudan flash chip "FM25Q04" (512 kB, SPI) on vl805. Chip status register is 0x00. Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Bit 6 is not set Chip status register: Top/Bottom (TB) is top Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Fudan FM25Q08, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25Q16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Fudan FM25Q32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25B128B/GD25Q128B, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ128C/GD25LQ128D, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ64(B), 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q127C/GD25Q128C, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q16(B), 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q20(B), 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q256D, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q32(B), 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q40(B), 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q512, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q64(B), 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q80(B), 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25T80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25VQ16C, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25VQ21B, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25VQ40C, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25VQ41B, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25VQ80C, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for GigaDevice GD25WQ80E, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25LP064, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25LP128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25LP256, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25WP032, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25WP064, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25WP128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ISSI IS25WP256, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Intel 25F160S33B8, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Intel 25F160S33T8, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Intel 25F320S33B8, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Intel 25F320S33T8, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Intel 25F640S33B8, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Intel 25F640S33T8, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX23L12854, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX23L1654, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX23L3254, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX23L6454, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L12805D, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L1605, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L1635D, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L1635E, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L25635F/MX25L25645G, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L3205(A), 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L3235D, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L3273E, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L5121E, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L6405, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L6405D, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L6495F, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25R3235F, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25R6435F, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U12835F, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U1635E, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U25635F, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U3235E/F, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U51245G, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U6435E/F, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX25U8032E, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix MX66L51235F/MX25L51245G, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P05-A, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q00A..1G, 131072 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q00A..3G, 131072 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q256..1E, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q256..3E, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q512..1G, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q512..3G, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QL01G, 131072 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QU01G, 131072 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QL02G, 262144 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QU02G, 262144 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QU128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QL128, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QL256, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QU256, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QL512, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Micron MT25QU512, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Nantronics N25S10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Nantronics N25S16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Nantronics N25S20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Nantronics N25S40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Nantronics N25S80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LD010(C), 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LD020(C), 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LD040(C), 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LD256C, 32 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LD512(C), 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LQ016, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LQ020, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LQ032C, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LQ040, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LQ080, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for PMC Pm25LV010A, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LV016B, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LV020, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LV040, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LV080B, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for SST SST25LF020A, 256 kB: compare_id: id1 0xa1, id2 0x12 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for SST SST25VF010(A), 128 kB: compare_id: id1 0xa1, id2 0x12 Probing for SST SST25VF016B, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25VF020, 256 kB: compare_id: id1 0xa1, id2 0x12 Probing for SST SST25VF020B, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25VF032B, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25VF040, 512 kB: compare_id: id1 0xa1, id2 0x12 Probing for SST SST25VF040B, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25VF040B.REMS, 512 kB: compare_id: id1 0xa1, id2 0x12 Probing for SST SST25VF064C, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25VF080B, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25VF512(A), 64 kB: compare_id: id1 0xa1, id2 0x12 Probing for SST SST25WF010, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF020, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF020A, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF040, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF040B, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF080, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF080B, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST25WF512, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST26VF016B(A), 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST26VF032B(A), 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST SST26VF064B(A), 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ST M95M02, 256 kB: probe_spi_st95: id1 0xff, id2 0xffff Probing for Sanyo LE25FU106B, 128 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FU206, 256 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FU206A, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FU406C/LE25U40CMC, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FW203A, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Sanyo LE25FW403A, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x12, id2 0x12 Probing for Spansion S25FL004A, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL008A, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL016A, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL032A/P, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL064A/P, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL127S-256kB, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL127S-64kB, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL128P......0, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL128P......1, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL128S......0, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL128S......1, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL128S_UL Uniform 128 kB Sectors, 16384 kB: Read id bytes: 0xa1 0x40 0x13 0xa1 0x40 0x13. Probing for Spansion S25FL128S_US Uniform 64 kB Sectors, 16384 kB: Read id bytes: 0xa1 0x40 0x13 0xa1 0x40 0x13. Probing for Spansion S25FL129P......0, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL129P......1, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL132K, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL164K, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL204K, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL208K, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL256S Large Sectors, 16384 kB: Read id bytes: 0xa1 0x40 0x13 0xa1 0x40 0x13. Probing for Spansion S25FL256S Small Sectors, 16384 kB: Read id bytes: 0xa1 0x40 0x13 0xa1 0x40 0x13. Probing for Spansion S25FL256S......0, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FL512S, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Spansion S25FS128S Large Sectors, 16384 kB: Read id bytes: 0xa1 0x40 0x13 0xa1 0x40 0x13. Probing for Spansion S25FS128S Small Sectors, 16384 kB: Read id bytes: 0xa1 0x40 0x13 0xa1 0x40 0x13. Probing for Winbond W25P16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25P32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25P80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q128.V, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q128.V..M, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q128.W, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q128.JW.DTR, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q16.V, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q16.W, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q20.W, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q256.V, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q256JV_M, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q256.W, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q256JW_DTR, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q32.V, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q32.W, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q40.V, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q40BW, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q40EW, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q512JV, 65536 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q64.V, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q64.W, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q64JW, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q80.V, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q80BW, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25Q80EW, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X05, 64 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X10, 128 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X16, 2048 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X32, 4096 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X64, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond W25X80, 1024 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for XMC XM25QH64C, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for XMC XM25QU64C, 8192 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for XMC XM25QH128C, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for XMC XM25QU128C, 16384 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for XMC XM25QH256C, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for XMC XM25QU256C, 32768 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Zetta Device ZD25D20, 256 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Zetta Device ZD25D40, 512 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Unknown SFDP-capable chip, 0 kB: SFDP revision = 1.0 SFDP number of parameter headers is 1 (NPH = 0). SFDP parameter table header 0/0: ID 0x00, version 1.0 Length 36 B, Parameter Table Pointer 0x000080 Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is non-volatile and the standard does not allow vendors to tell us whether EWSR/WREN is needed for status register writes - assuming EWSR. Write chunk size is at least 64 B. Flash chip size is 512 kB. Block eraser 0: 128 x 4096 B with opcode 0x20 Tried to add a duplicate block eraser: 128 x 4096 B with opcode 0x20. Block eraser 1: 16 x 32768 B with opcode 0x52 Block eraser 2: 8 x 65536 B with opcode 0xd8 done. Probing for AMIC unknown AMIC SPI chip, 0 kB: compare_id: id1 0xa1, id2 0x4013 Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Generic Variable Size SPI chip, 64 kB: Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Generic unknown SPI chip (REMS), 0 kB: compare_id: id1 0xa1, id2 0x12 Found Fudan flash chip "FM25Q04" (512 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Block protection is disabled. Reading flash... done.

1 0

Re: VIA VL805 SPI Flash Bus support
by John Paul Morrison 04 Feb '21

04 Feb '21

I built flashrom from commit 7b8b945a004ba69529fe0283ad18a40ee34255bd I was able to read firmware from my pci card. I don't have an original firmware (version 013600) to compare it to but it looks legit: cmp -l vl805_fw_013600.bin vl805_fw_013701.bin | head 130 40 41 131 256 245 133 42 43 134 340 147 151 214 374 172 74 303 178 166 346 180 43 44 181 202 11 241 42 41 flashrom dumps the whole 512KB of FM25Q04 using generic SPI. Comparing other official firmware my guess is the layout(?) for this firmware should be: 0:17AD7 FW013600 i'M keeping track of firmware on https://github.com/jpmorrison/VL805/tree/main/firmware flashrom unknown on Linux 4.15.0-130-generic (x86_64) flashrom was built with libpci 3.5.2, GCC 7.5.0, little endian Command line (7 args): ./flashrom -VV --programmer vl805 -r test.img -o test.log Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing vl805 programmer Found "VIA VL805" (1106:3483, BDF 01:00.0). ... SFDP has autodetected a flash chip which is not natively supported by flashrom yet. All standard operations (read, verify, erase and write) should work, but to support all possible features we need to add them manually. You can help us by mailing us the output of the following command to flashrom(a)flashrom.org: 'flashrom -VV [plus the -p/--programmer parameter]' Thanks for your help! === Found Unknown flash chip "SFDP-capable chip" (512 kB, SPI) on vl805. Probing for AMIC unknown AMIC SPI chip, 0 kB: compare_id: id1 0xa1, id2 0x4013 Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Generic Variable Size SPI chip, 64 kB: Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. compare_id: id1 0x00, id2 0x00 Probing for Generic unknown SPI chip (REMS), 0 kB: compare_id: id1 0xa1, id2 0x12 Found Unknown flash chip "SFDP-capable chip" (512 kB, SPI). Block protection is disabled. Reading flash... done.

1 0

HDD in-circuit reprogramming
by Thomasheidler 03 Feb '21

03 Feb '21

Hi I need to reprogram the firmware on a WD HDD with SOIC8 Winbond chip supported by flashrom. I tried reading in-circuit but my programmer does not detect it (other chips work fine). Probably other components are drawing voltage so I disconnected Vcc and tried to power it through regular SATA connectors which didn't work. Do you have any recommendations how to workaround this issue? Will supplying power through 3.3V Vcc and SATA connector at same time fry the chip? Thanks for your help Tom

2 1

bios flash
by Justin Eazy Cheeze 03 Feb '21

03 Feb '21

Hi I tried bios flashing and it ran perfectly till it verified at the end of writing the flash C:\Users\Justin Hardy\Desktop\Flashrom_v1.2_St1cky>flashrom -w FLASH.ROM -p busp irate_spi:dev=COM5,spispeed=1M flashrom v1.2 on Windows 6.1 (x86_64) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. Found Winbond flash chip "W25Q32.V" (4096 kB, SPI) on buspirate_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000060! Expected=0x00, Found=0x01, failed byte count from 0x00000000-0x003fffff: 0xc0af Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! C:\Users\Justin Hardy\Desktop\Flashrom_v1.2_St1cky> At first I got a fail reading because I disconnected it somehow, then it worked and got this at the very end thanks!

2 1

Information function read
by Lukas Augustin 03 Feb '21

03 Feb '21

Hi, I would like to ask about read parametr. I have PC HP All-in-one and after change SSD disk PC blackout, not even logo shown up, so i found instructions how to write newer bios(because led double flash and that me bios corrupted) using Arduino UNO to ROM_RECOVER bus.Firstly I try backup old ROM used command: sudo flashrom -p serprog:dev=/dev/ttyACM0:115200 -r old.ROM and after that I saw serial line sending data but after 10 minutes LED TX turn off and at Terminal is still Reading flash.... after 30minute waiting nothing happend. Will you advise me? Thank you, in attachment is picture of terminal

2 1

adding support for PCIe SPI flash?
by John Paul Morrison 03 Feb '21

03 Feb '21

Hi I'm just starting to look at fashrom to see how to read/update SPI flash on a PCIe card lspci -d 1106:3483 01:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01) There isn't much from Via but the chipset is used in the Raspberry Pi 4 and the Pi firmware provides a flash tool vl805 (no source code of course!) I can run it on Intel with Qemu - unfortunately for me the tool is hard coded for a different SPI flash chip (and in later Pi hardware seems to have been moved/removed) Inspecting the board and related datasheets (VL800) the chipset has an SPI interface for firmware, and it can be used for PCI BIOS apparently. The actual SPI chip varies from board to board - mine is FM25Q04 from the data sheet ID=A112. Raspberry Pi seems to use W25X10BV based on the ID EF10 Are there any simple examples of accessing SPI on PCIe cards? sorry for the long post - I've included a bit more info on what I could find on the chip thanks John Paul Other info on the chip: I can read the firmware version easily: sudo lspci -d 1106:3483 -xxx | awk '/^50:/ { print "VL805 FW version: " $5 $4 $3 $2 }' I can use strace to see what vl805 doing - I can make out some SPI commands - here it reads the SPI flash chip ID: openat(AT_FDCWD, "/sys/bus/pci/devices/0000:01:00.0/config", O_RDWR) = 4 (bunch of reads/writes) pread64(4, "\22\241\22\241", 4, 124) = 4 write(1, "R Rx_REG0 a112a112\n", 19) = 19 sudo ~/vl805/vl805 -d VL805 FW version: 00013600 W CHIP_SEL 00000001 R PCI_WB_EN ffffffff W PCI_WB_EN ffffff01 R STOP_POLLING 00000001 W STOP_POLLING 00000001 W CTRL_REG 000005a0 W CLK_DIV 0000000a W CHIP_SEL 00000000 W Tx_REG0 90000000 W CTRL_REG 000005c0 R Rx_REG0 a112a112 W CHIP_SEL 00000001 * flash ID mismatch - found a112, expected 0000ef10 I was able to find a Windows based firmware updater which supports about 20 different SPI chips - people have reported adding new chipsets, looks like I have to add mine as well. The flash tool runs under wine but it can't read anything - will have to find a fix or run in a vm. Via SpiFlash.ini: [MX25L512] FlashID=C22010 ReadID=9F WriteEnable=06 WriteStatus=01 ChipErase=60 ReadData=03 ReadStatus=05 PageProgram=02 ClockRate=32 PageSize=100 Raspberry Pi 4 ? [W25X10BV] FlashID=EF10 ReadID=90000000 WriteEnable=06 WriteStatus=01 ChipErase=C7 ReadData=03 ReadStatus=05 PageProgram=02 ClockRate=32 PageSize=10

2 2

FAILED: GA-J1900N-D3V (rev. 1.x)
by christian＠diehl.nu 02 Feb '21

02 Feb '21

Hi there, I might have bricked my GA-J1900N-D3V (rev. 1.x) mainboad using flashrom. The BIOS/UEFI was in fallback mode using an old version of the BIOS (F1). This happened before using flashrom and is unrelated (but might be helpful to you). I am not sure what triggered the fallback - I blame it on a possible stuck power on switch triggering a manual failover. I did a successful read before the attempted write. The file is saved. Below is the full terminal output of the process. Hope you can help me. Thanks, Christian ------------------------------------------------------------- flashrom -p internal -w J190ND3V.F7 flashrom v1.2 on Linux 5.4.80-gentoo-r1-x86_64 (x86_64) flashrom is free software, get the source code at <https://flashrom.org> Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found chipset "Intel Bay Trail". Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0x0 from 0x22 to 0x01 failed. New value is 0x22. OK. Found Macronix flash chip "MX25U6435E/F" (8192 kB, SPI) mapped at physical address 0xff800000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_write_cmd failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Transaction error! spi_write_cmd failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Transaction error! spi_write_cmd failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Transaction error! spi_write_cmd failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Transaction error! spi_write_cmd failed during command execution at address 0x0 Reading current flash chip contents... done. Looking for another erase function. Looking for another erase function. Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail <flashrom(a)flashrom.org> with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF!

1 0

Question about flashrom GD25Q64(B)
by magiccat1 31 Jan '21

31 Jan '21

Hi, How are you? I am trying to coreboot an Asus A88XM-E. The chip on that motherboard is GD25Q64(B), which I execute sudo flashrom --programmer ch341a_spi -w coreboot.rom, I got this error: flashrom v1.2 on Linux 5.9.14-rockchip64 (aarch64) flashrom is free software, get the source code at https://flashrom.org Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Found GigaDevice flash chip "GD25Q64(B)" (8192 kB, SPI) on ch341a_spi. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5f, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0x168 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! I got new GD25Q64 chips from aliexpress. The verbose version is like this: Found GigaDevice flash chip "GD25Q64(B)" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00000fff: 0xd28 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: 0x7a0b ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xf342 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x7fffff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x9dfd4 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. I have also made a post on reddit asking for answers. https://www.reddit.com/r/coreboot/comments/krfjsn/question_about_how_to_cor… Can you please let me know what I did wrong? Thanks,

2 1

flashrom on my laptop
by ShadowAce1 28 Jan '21

28 Jan '21

Hello, I am rying to update the BIOS on my 10-yr-old laptop. Per the output of the flashrom command, I am including the output I received: [root@Dilbert ~]# flashrom -p internal -V flashrom v1.2 on Linux 5.8.18-350.vanilla.knurd.1.fc33.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.4, GCC 10.2.1 20201125 (Red Hat 10.2.1-9), little endian Command line (3 args): flashrom -p internal -V Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing internal programmer /sys/class/mtd/mtd0 does not exist No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Notebook" Laptop detected via DMI. DMI string system-manufacturer: "Micro-Star International" DMI string system-product-name: "GT680R/GX680R" DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "Micro-Star International" DMI string baseboard-product-name: "MS-16F2" DMI string baseboard-version: "To be filled by O.E.M." W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 00. Found chipset "Intel HM67" with PCI ID 8086:1c4b. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Root Complex Register Block address = 0xfed1c000 Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000 /dev/mem mmap failed: Operation not permitted FAILED! FATAL ERROR! Error: Programmer Can you help? Can I use this utility to flash my BIOS (I have the BIOS file from MSI)? Mike Sent with [ProtonMail](https://protonmail.com) Secure Email.

5 5

Shim issues
by Tonya Smith 28 Jan '21

28 Jan '21

I'm trying to Shim an HP 11 G8 EE. No matter what shim I use from HP, it fails to write the HWID. Please advise. Thanks! Tonya Smith Computer Tech I

1 0

XMC QH32BHIG new flash chip
by grz3chu＠gmail.com 28 Jan '21

28 Jan '21

Hi, I found a new chip, can it be added? I attach the log, photo and datasheet. Thanks.

1 0

Adding write protect/lock support to flashrom
by ln2＠mailo.com 25 Jan '21

25 Jan '21

Hi all, I would like to see the following feature added to flashrom: https://github.com/flashrom/flashrom/issues/185 If someone implemented it, would the idea (at least) be accepted? Is anyone interested in implementing it and claiming the $100 bounty? Text of the issue, for people too lazy to click: Some chips require certain bits (and similar features) be set before the hardware write-protect pins can be used. Flashrom doesn't currently support setting these bits, which makes it impossible to e.g hardware write-protect a BIOS chip after flashing Coreboot. I would like to see Flashrom add support for this. Attached is a patch which was written by someone else (they can identify themselves if they like) to toggle the relevant bits for a particular flash chip, each time flashrom is run, and tell the user what's going on. Your task, if you want to claim the bounty, is to: 1- Add some UI sugar so that the user can choose to set the appropriate bits (or not), and any other "features" needed to enable hardware write-protect, via the command line 2- Ensure the necessary bits and features can be set for a specified set of chips (see below), so Flashrom supports hardware write protect for at least all of the listed chips, and 3- Get your patch accepted and merged (it may be wise to first check with the maintainers that they are willing to add this feature) using Gerrit or the mailing list as per the official process If $100 isn't enough to make this attractive, I am open to increasing the bounty. I am also happy to escrow it if need be. Payment will be in Bitcoin.

1 0

report M45PE16
by **************************** 25 Jan '21

25 Jan '21

1 0

Ch341a
by Chuck Wilson 23 Jan '21

23 Jan '21

Received the following message: "Read is not working on this chip. Aborting." while trying to read a "PM25LQ010" Here is the exact programmer I have: SOIC8 SOP8 Flash Chip/IC Test Clip with Adapters and CH341A 24 25 Series EEPROM Flash BIOS USB Programmer Amazon Link: https://www.amazon.com/gp/product/B08CDCPPTZ/ref=ppx_yo_dt_b_asin_title_o07… The PM25LQ010 I would like to read/write is on a Nvidia GTS 450 Video Card. Flashrom Version 1.2 has detected my CH341A USB device but unable to detect the Bios Chip. Included a picture of the physical Bios. If there is more information I can provide please let me know. Chuck

2 2

Dell XPS 15 9550
by Andrew Warhol 23 Jan '21

23 Jan '21

Hello, I was wondering if anyone would mind helping me with an issue I'm running into with flashrom on a dell xps 15 9550. The dell has a 16 mbyte Winbond W25Q128.V bios chip on it. I'm using flash rom on a raspberry pi 4 but when I read this chip with a soic8 test clip, it seems to read successfully. However, when checking to see if the checksum of the reads I do are identical, they always come up as different values. The other two bios chips however read with the same checksums every time. I am attempting to use intel me cleaner to set the hap bit and disable intel me without repartitioning or cleaning anything on the chip as intel boot guard is enabled. ME Cleaner is able to read the file and say the hap bit has been successfully set. However, when writing the modified image, I get the error through flash rom verifying flash...failed, your flash chip is in an unknown state. The laptop will no longer boot and the power light comes on for a moment before turning on. I suspect either flash rom is not compatible with this chip or something about this chip prevents it from being read by flash rom. Using this guide: darajnish/dell5577medisable it seems as though a select few people have been able to set the hap bit by using the command soft-disable-only. Even when I try re-flashing the original read bios image however, the laptop still does not boot. I read somewhere that my chip has flash descriptors locked, but since other people have had success I'm not sure why I can't get it to work properly. Any advice would be much appreciated!

2 1

Write protect: would this be accepted?
by ln2max＠danwin1210.me 23 Jan '21

23 Jan '21

Hi all, I would like to see the following feature added to flashrom: https://github.com/flashrom/flashrom/issues/185 If someone implemented it, would the idea (at least) be accepted?

1 0

GD25Q64 more logs
by magiccat1 20 Jan '21

20 Jan '21

Found GigaDevice flash chip "GD25Q64(B)" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Reading old flash chip contents... libusb: error [udev_hotplug_event] ignoring udev action change libusb: error [udev_hotplug_event] ignoring udev action bind done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00000fff: 0xd32 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:EFAILED at 0x00000000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: 0x7a13 ERASE FAILED! Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:EW, 0x010000-0x01ffff:S, 0x020000-0x02ffff:EW, 0x030000-0x03ffff:EW, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:EW, 0x080000-0x08ffff:EW, 0x090000-0x09ffff:EW, 0x0a0000-0x0affff:EW, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:S, 0x190000-0x19ffff:S, 0x1a0000-0x1affff:S, 0x1b0000-0x1bffff:S, 0x1c0000-0x1cffff:S, 0x1d0000-0x1dffff:S, 0x1e0000-0x1effff:S, 0x1f0000-0x1fffff:S, 0x200000-0x20ffff:S, 0x210000-0x21ffff:S, 0x220000-0x22ffff:S, 0x230000-0x23ffff:S, 0x240000-0x24ffff:S, 0x250000-0x25ffff:S, 0x260000-0x26ffff:S, 0x270000-0x27ffff:S, 0x280000-0x28ffff:S, 0x290000-0x29ffff:S, 0x2a0000-0x2affff:S, 0x2b0000-0x2bffff:S, 0x2c0000-0x2cffff:S, 0x2d0000-0x2dffff:S, 0x2e0000-0x2effff:S, 0x2f0000-0x2fffff:S, 0x300000-0x30ffff:S, 0x310000-0x31ffff:S, 0x320000-0x32ffff:S, 0x330000-0x33ffff:S, 0x340000-0x34ffff:S, 0x350000-0x35ffff:S, 0x360000-0x36ffff:S, 0x370000-0x37ffff:S, 0x380000-0x38ffff:S, 0x390000-0x39ffff:S, 0x3a0000-0x3affff:S, 0x3b0000-0x3bffff:S, 0x3c0000-0x3cffff:S, 0x3d0000-0x3dffff:S, 0x3e0000-0x3effff:S, 0x3f0000-0x3fffff:S, 0x400000-0x40ffff:S, 0x410000-0x41ffff:S, 0x420000-0x42ffff:S, 0x430000-0x43ffff:S, 0x440000-0x44ffff:S, 0x450000-0x45ffff:S, 0x460000-0x46ffff:S, 0x470000-0x47ffff:S, 0x480000-0x48ffff:S, 0x490000-0x49ffff:S, 0x4a0000-0x4affff:S, 0x4b0000-0x4bffff:S, 0x4c0000-0x4cffff:S, 0x4d0000-0x4dffff:S, 0x4e0000-0x4effff:S, 0x4f0000-0x4fffff:S, 0x500000-0x50ffff:S, 0x510000-0x51ffff:S, 0x520000-0x52ffff:S, 0x530000-0x53ffff:S, 0x540000-0x54ffff:S, 0x550000-0x55ffff:S, 0x560000-0x56ffff:S, 0x570000-0x57ffff:S, 0x580000-0x58ffff:S, 0x590000-0x59ffff:S, 0x5a0000-0x5affff:S, 0x5b0000-0x5bffff:S, 0x5c0000-0x5cffff:S, 0x5d0000-0x5dffff:S, 0x5e0000-0x5effff:S, 0x5f0000-0x5fffff:S, 0x600000-0x60ffff:S, 0x610000-0x61ffff:S, 0x620000-0x62ffff:S, 0x630000-0x63ffff:S, 0x640000-0x64ffff:S, 0x650000-0x65ffff:S, 0x660000-0x66ffff:S, 0x670000-0x67ffff:S, 0x680000-0x68ffff:S, 0x690000-0x69ffff:S, 0x6a0000-0x6affff:S, 0x6b0000-0x6bffff:S, 0x6c0000-0x6cffff:S, 0x6d0000-0x6dffff:S, 0x6e0000-0x6effff:S, 0x6f0000-0x6fffff:S, 0x700000-0x70ffff:S, 0x710000-0x71ffff:S, 0x720000-0x72ffff:S, 0x730000-0x73ffff:S, 0x740000-0x74ffff:S, 0x750000-0x75ffff:S, 0x760000-0x76ffff:S, 0x770000-0x77ffff:S, 0x780000-0x78ffff:S, 0x790000-0x79ffff:S, 0x7a0000-0x7affff:S, 0x7b0000-0x7bffff:S, 0x7c0000-0x7cffff:S, 0x7d0000-0x7dffff:S, 0x7e0000-0x7effff:S, 0x7f0000-0x7fffff:EW Erase/write done. Verifying flash... FAILED at 0x00000000! Expected=0x5f, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0xb5 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! Sent with [ProtonMail](https://protonmail.com) Secure Email.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom