flashrom April 2016

flashrom@flashrom.org

28 participants
35 discussions

Re: [flashrom] unknown chip
by Idwer Vollering 21 Apr '16

21 Apr '16

Hi, I think you meant MX25U12835F. This fork of flashrom code seems to have done the work for us: https://github.com/rjarzmik/flashrom2/blob/master/src/chips/mx25u12835f.c HTH, Idwer 2016-04-19 15:34 GMT+02:00 John Bork <johnbork023(a)gmail.com>: > Hi, > > got this probe result from a MX25U12845F chip, if you want to add it to your > support list. > > BR > John Bork > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > https://www.flashrom.org/mailman/listinfo/flashrom

1 0

Giving to -i option some real use
by Salvador Eduardo Tropea 21 Apr '16

21 Apr '16

Hi All! Now I'm using an FPGA board with 4 MiB of flash, was using one with 128 kiB. So now the time to read/write/verify the whole memory is enough to annoy me ;-) So I tried creating a layout like this: <-- 00000000:00007e2b fpga 00007e2c:003fffff free <-- Note: yes only 32300 bytes used, the rest can be used for other purposes (0,77%). And then I used "-i fpga". But it didn't help ... flashrom read the 4 MiB twice (one at the beggining and another for the verification). Looking at the code I found a variable named read_all_first with a comment about the lack of implementation. So I implemented the needed code to: 1) Add a command line option to make it 0 (avoiding the big reads). This option can be used only when at least one image is indicated with -i 2) Skip the big read when read_all_first is 0. Only the regions indicated by the user are actually fetched from the memory. 3) Same for the verification stage. Additionally I added a command line option to show the progress, very usefull for big memories (and impatient users ;-). Are these additions desired in the project? If yes: I want to discuss the implementation details. If no: I'll just keep them for my use. Regards, SET -- Ing. Salvador Eduardo Tropea http://utic.inti.gob.ar/ INTI - Micro y Nanoelectrónica (CMNB) http://www.inti.gob.ar/ Unidad Técnica Sistemas Inteligentes Av. General Paz 5445 Tel: (+54 11) 4724 6300 ext. 6919 San Martín - B1650KNA FAX: (+54 11) 4754 5194 Buenos Aires * Argentina

3 3

[PATCH v3 1/2] Add support for selecting the erased bit value with a flag
by Paul Kocialkowski 19 Apr '16

19 Apr '16

Most flash chips are erased to ones and programmed to zeros. However, some other flash chips, such as the ENE KB9012 internal flash, work the opposite way. Signed-off-by: Paul Kocialkowski <contact(a)paulk.fr> --- flash.h | 5 ++++- flashrom.c | 39 +++++++++++++++++++++------------------ 2 files changed, 25 insertions(+), 19 deletions(-) diff --git a/flash.h b/flash.h index da049d1..dc5c140 100644 --- a/flash.h +++ b/flash.h @@ -123,6 +123,9 @@ enum write_granularity { #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) #define FEATURE_OTP (1 << 8) #define FEATURE_QPI (1 << 9) +#define FEATURE_ERASED_ZERO (1 << 10) + +#define ERASED_VALUE(flash) (((flash)->chip->feature_bits & FEATURE_ERASED_ZERO) ? 0x00 : 0xff) enum test_state { OK = 0, @@ -275,7 +278,7 @@ int probe_flash(struct registered_master *mst, int startchip, struct flashctx *f int read_flash_to_file(struct flashctx *flash, const char *filename); char *extract_param(const char *const *haystack, const char *needle, const char *delim); int verify_range(struct flashctx *flash, const uint8_t *cmpbuf, unsigned int start, unsigned int len); -int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum write_granularity gran); +int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum write_granularity gran, const uint8_t erased_value); void print_version(void); void print_buildinfo(void); void print_banner(void); diff --git a/flashrom.c b/flashrom.c index 25e53f2..d5c3238 100644 --- a/flashrom.c +++ b/flashrom.c @@ -696,12 +696,13 @@ int check_erased_range(struct flashctx *flash, unsigned int start, { int ret; uint8_t *cmpbuf = malloc(len); + const uint8_t erased_value = ERASED_VALUE(flash); if (!cmpbuf) { msg_gerr("Could not allocate memory!\n"); exit(1); } - memset(cmpbuf, 0xff, len); + memset(cmpbuf, erased_value, len); ret = verify_range(flash, cmpbuf, start, len); free(cmpbuf); return ret; @@ -754,7 +755,7 @@ out_free: } /* Helper function for need_erase() that focuses on granularities of gran bytes. */ -static int need_erase_gran_bytes(const uint8_t *have, const uint8_t *want, unsigned int len, unsigned int gran) +static int need_erase_gran_bytes(const uint8_t *have, const uint8_t *want, unsigned int len, unsigned int gran, const uint8_t erased_value) { unsigned int i, j, limit; for (j = 0; j < len / gran; j++) { @@ -764,7 +765,7 @@ static int need_erase_gran_bytes(const uint8_t *have, const uint8_t *want, unsig continue; /* have needs to be in erased state. */ for (i = 0; i < limit; i++) - if (have[j * gran + i] != 0xff) + if (have[j * gran + i] != erased_value) return 1; } return 0; @@ -784,7 +785,7 @@ static int need_erase_gran_bytes(const uint8_t *have, const uint8_t *want, unsig * @gran write granularity (enum, not count) * @return 0 if no erase is needed, 1 otherwise */ -int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum write_granularity gran) +int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum write_granularity gran, const uint8_t erased_value) { int result = 0; unsigned int i; @@ -799,31 +800,31 @@ int need_erase(const uint8_t *have, const uint8_t *want, unsigned int len, enum break; case write_gran_1byte: for (i = 0; i < len; i++) - if ((have[i] != want[i]) && (have[i] != 0xff)) { + if ((have[i] != want[i]) && (have[i] != erased_value)) { result = 1; break; } break; case write_gran_128bytes: - result = need_erase_gran_bytes(have, want, len, 128); + result = need_erase_gran_bytes(have, want, len, 128, erased_value); break; case write_gran_256bytes: - result = need_erase_gran_bytes(have, want, len, 256); + result = need_erase_gran_bytes(have, want, len, 256, erased_value); break; case write_gran_264bytes: - result = need_erase_gran_bytes(have, want, len, 264); + result = need_erase_gran_bytes(have, want, len, 264, erased_value); break; case write_gran_512bytes: - result = need_erase_gran_bytes(have, want, len, 512); + result = need_erase_gran_bytes(have, want, len, 512, erased_value); break; case write_gran_528bytes: - result = need_erase_gran_bytes(have, want, len, 528); + result = need_erase_gran_bytes(have, want, len, 528, erased_value); break; case write_gran_1024bytes: - result = need_erase_gran_bytes(have, want, len, 1024); + result = need_erase_gran_bytes(have, want, len, 1024, erased_value); break; case write_gran_1056bytes: - result = need_erase_gran_bytes(have, want, len, 1056); + result = need_erase_gran_bytes(have, want, len, 1056, erased_value); break; case write_gran_1byte_implicit_erase: /* Do not erase, handle content changes from anything->0xff by writing 0xff. */ @@ -1470,6 +1471,7 @@ static int erase_and_write_block_helper(struct flashctx *flash, unsigned int starthere = 0, lenhere = 0; int ret = 0, skip = 1, writecount = 0; enum write_granularity gran = flash->chip->gran; + const uint8_t erased_value = ERASED_VALUE(flash); /* curcontents and newcontents are opaque to walk_eraseregions, and * need to be adjusted here to keep the impression of proper abstraction @@ -1477,7 +1479,7 @@ static int erase_and_write_block_helper(struct flashctx *flash, curcontents += start; newcontents += start; msg_cdbg(":"); - if (need_erase(curcontents, newcontents, len, gran)) { + if (need_erase(curcontents, newcontents, len, gran, erased_value)) { msg_cdbg("E"); ret = erasefn(flash, start, len); if (ret) @@ -1487,7 +1489,7 @@ static int erase_and_write_block_helper(struct flashctx *flash, return -1; } /* Erase was successful. Adjust curcontents. */ - memset(curcontents, 0xff, len); + memset(curcontents, erased_value, len); skip = 0; } /* get_next_write() sets starthere to a new value after the call. */ @@ -1984,6 +1986,7 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, int ret = 0; unsigned long size = flash->chip->total_size * 1024; int read_all_first = 1; /* FIXME: Make this configurable. */ + const uint8_t erased_value = ERASED_VALUE(flash); if (chip_safety_check(flash, force, read_it, write_it, erase_it, verify_it)) { msg_cerr("Aborting.\n"); @@ -2010,15 +2013,15 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it, msg_gerr("Out of memory!\n"); exit(1); } - /* Assume worst case: All bits are 0. */ - memset(oldcontents, 0x00, size); + /* Assume worst case: All bits are not erased. */ + memset(oldcontents, ~erased_value, size); newcontents = malloc(size); if (!newcontents) { msg_gerr("Out of memory!\n"); exit(1); } - /* Assume best case: All bits should be 1. */ - memset(newcontents, 0xff, size); + /* Assume best case: All bits should be erased. */ + memset(newcontents, erased_value, size); /* Side effect of the assumptions above: Default write action is erase * because newcontents looks like a completely erased chip, and * oldcontents being completely 0x00 means we have to erase everything -- 2.6.4

1 2

unknown chip
by John Bork 19 Apr '16

19 Apr '16

Hi, got this probe result from a MX25U12845F chip, if you want to add it to your support list. BR John Bork

1 0

Re: [flashrom] using DLP-USB1232H/MinnowboardMAX, verification error. is it due to DP_IO3L in SPI header not connected ?
by Sathish Kumar Balasubramaniam -ERS, HCL Tech 19 Apr '16

19 Apr '16

I got the problem. It's since I provided 1.8v to SPI chip VCC while the CS,SCLK,SI,SO logic levels (from DLP-USB1232H) are higher than 1.8v which also needs to be down to 1.8v to work. Regards, B.Sathish Kumar -----Original Message----- From: Sathish Kumar Balasubramaniam -ERS, HCL Tech Sent: 19 April 2016 00:59 To: flashrom(a)flashrom.org Subject: RE: using DLP-USB1232H/MinnowboardMAX, verification error. is it due to DP_IO3L in SPI header not connected ? forgot to add env info OS: Ubuntu 14.04.4 64bit flashrom version - 0.9.9 ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------

1 0

Re: [flashrom] using DLP-USB1232H/MinnowboardMAX, verification error. is it due to DP_IO3L in SPI header not connected ?
by Sathish Kumar Balasubramaniam -ERS, HCL Tech 18 Apr '16

18 Apr '16

forgot to add env info OS: Ubuntu 14.04.4 64bit flashrom version - 0.9.9 ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------

1 0

using DLP-USB1232H/MinnowboardMAX, verification error. is it due to DP_IO3L in SPI header not connected ?
by Sathish Kumar Balasubramaniam -ERS, HCL Tech 18 Apr '16

18 Apr '16

I am trying to use DLP-USB1232H with flashrom for programming SPI flash in Minnowboard MAX. I connected CS,SCLK,SO,SI (referred https://www.flashrom.org/FT2232SPI_Programmer). I didn't connect WP# and HOLD# to VCC and not sure whether it is needed in minnowboard max. I am not able to find where to connect DDP_IO3L in SPI header of Minnowboard MAX. i.e., to which pin in DLP-USB1232H when I tried to execute "flashrom -p ft2232_spi:type=2232H,port=A" sometimes it does not detect the chip. when I try again removing and reconnecting the USB wire, chip will get detected. I am able to read the chip contents any time. But when I try to write contents, it says done, but verification says error , content at ... not expected. I tried reading again and checked. the content is not written properly. Is this due to that I have not connected DDP_IO3L pin from minnowboard max ? Regards, B.Sathish Kumar ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------

1 0

Re: [flashrom] FAILED: W25Q64.W
by David Hendricks 17 Apr '16

17 Apr '16

Hi Davinder, The transaction error is likely caused by the Management Engine: https://www.flashrom.org/ME On Fri, Apr 15, 2016 at 10:19 PM, Davinder Pal Singh Sawhney < davinder.sawhney(a)gmail.com> wrote: > Dear Sir, > > Please help me. Here is complete log > > flashrom -p internal -w backup.bin > flashrom v0.9.9-r1954 on Linux 3.16.0-4-686-pae (i686) > flashrom is free software, get the source code at https://flashrom.org > > Calibrating delay loop... OK. > No DMI table found. > Found chipset "Intel Braswell". > This chipset is marked as untested. If you are using an up-to-date version > of flashrom *and* were (not) able to successfully update your firmware > with it, > then please email a report to flashrom(a)flashrom.org including a verbose > (-V) log. > Thank you! > Enabling flash write... Warning: BIOS region SMM protection is enabled! > Warning: Setting Bios Control at 0x0 from 0x22 to 0x01 failed. > New value is 0x22. > Warning: SPI Configuration Lockdown activated. > OK. > Found Winbond flash chip "W25Q64.W" (8192 kB, SPI) mapped at physical > address 0xff800000. > Reading old flash chip contents... done. > Erasing and writing flash chip... Transaction error! > spi_block_erase_20 failed during command execution at address 0x416000 > Reading current flash chip contents... done. Looking for another erase > function. > spi_block_erase_52 failed during command execution at address 0x410000 > Reading current flash chip contents... done. Looking for another erase > function. > spi_block_erase_d8 failed during command execution at address 0x410000 > Reading current flash chip contents... done. Looking for another erase > function. > spi_chip_erase_60 failed during command execution > Reading current flash chip contents... done. Looking for another erase > function. > spi_chip_erase_c7 failed during command execution > Looking for another erase function. > No usable erase functions left. > FAILED! > Uh oh. Erase/write failed. Checking if anything has changed. > Reading current flash chip contents... done. > Apparently at least some data has changed. > Your flash chip is in an unknown state. > Get help on IRC at chat.freenode.net (channel #flashrom) or > mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! > > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > > > flashrom -V > flashrom v0.9.9-r1954 on Linux 3.16.0-4-686-pae (i686) > flashrom is free software, get the source code at https://flashrom.org > > flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian > Command line (1 args): flashrom -V > Please select a programmer with the --programmer parameter. > Previously this was not necessary because there was a default set. > To choose the mainboard of this computer use 'internal'. Valid choices are: > internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, atavia, > it8212, ft2232_spi, serprog, buspirate_spi, dediprog, rayer_spi, pony_spi, > nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, satamv, linux_spi, > usbblaster_spi, pickit2_spi, ch341a_spi. > > -- > Best Regards, > Davinder > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > https://www.flashrom.org/mailman/listinfo/flashrom > -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Issue flashing MX25L3206E
by Thomas Leclercq 17 Apr '16

17 Apr '16

Hello, I'm trying to flash back a bricked BIOS, i followed the instructions here : https://rog.asus.com/forum/archive/index.php/t-24576.html Here's what i get when trying to read the chip : flashrom v0.9.7-r1860 on Windows 6.1 (x86) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with GCC 4.9.1, little endian Command line (5 args): flashrom -r bios_img.bin -p buspirate_spi:dev=COM4,spispeed=1M -V Calibrating delay loop... OS timer resolution is 1000 usecs, 1565M loops per second, 10 myus = 0 us, 100 myus = 1000 us, 1000 myus = 1000 us, 10000 myus = 10000 us, 4000 myus = 4001 us, OK. Initializing buspirate_spi programmer Baud rate is 115200. Detected Bus Pirate hardware v3a Detected Bus Pirate firmware 5.10 Using SPI command set v2. SPI speed is 1MHz Raw bitbang mode version 1 Raw SPI mode version 1 The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L05PU, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L10PT, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L10PU, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L20PT, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L20PU, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L40PT, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L40PU, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L80P, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L16PT, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L16PU, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L032, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25LQ16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25LQ64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF021, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF041A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF321, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF321A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF641(A), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DL081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DL161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DQ161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25FS040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF041, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF161A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26F004, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45CS1282, 16896 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB011D, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB021D, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB041D, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB081D, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB161D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB321C, 4224 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB321D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB321E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB642D, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for ESMT F25L008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for ESMT F25L32PA, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B05T, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B10T, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B20T, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B40T, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B80T, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B16T, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B32T, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B64T, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q80(A), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q32(A/B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q20(B), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q40(B), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q80(B), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q16(B), 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q32(B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q64(B), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q128B, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25T80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F160S33B8, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F160S33T8, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F320S33B8, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F320S33T8, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F640S33B8, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F640S33T8, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L1654, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L3254, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L6454, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L12854, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L2005(C), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L4005(A/C), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1605, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1635D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3205(A), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3206E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3273E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3235D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L6405(D), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L6445E/MX25L6473E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L12805(D), 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U3235E/F, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U6435E/F, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U12835F, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P05, 64 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P10-A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P10, 128 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD256C, 32 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD512(C), 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD010(C), 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD020(C), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD040(C), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for PMC Pm25LV010A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW203A, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo LE25FW403A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Spansion S25FL004A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL016A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL032A/P, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL064A/P, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL204K, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL208K, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL132K, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL164K, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL127S-64kB, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL127S-256kB, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128P......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128P......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128S......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128S......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL129P......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL129P......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF020B, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF032B, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF064C, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q40.V, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q80.V, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q16.V, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q32.V, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q64.V, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q128.V, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q20.W, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q40.W, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q80.W, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q16.W, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q32.W, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q64.W, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) on buspirate_spi. Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x0, id2 0x0 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI). === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Raw bitbang mode version 1 Bus Pirate shutdown completed. ____________________________________________________ ____________________________________________________ I've seen that there's probably a connection problem, so i've tried moving the pins of the bus pirate and it gives me the same error messages. Is there something i can do ? Thank you for your precious help Cordialement, Thomas LECLERCQ thomas.leclercq94(a)gmail.com

1 0

FAILED: W25Q64.W
by Davinder Pal Singh Sawhney 16 Apr '16

16 Apr '16

Dear Sir, Please help me. Here is complete log flashrom -p internal -w backup.bin flashrom v0.9.9-r1954 on Linux 3.16.0-4-686-pae (i686) flashrom is free software, get the source code at https://flashrom.org Calibrating delay loop... OK. No DMI table found. Found chipset "Intel Braswell". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Warning: BIOS region SMM protection is enabled! Warning: Setting Bios Control at 0x0 from 0x22 to 0x01 failed. New value is 0x22. Warning: SPI Configuration Lockdown activated. OK. Found Winbond flash chip "W25Q64.W" (8192 kB, SPI) mapped at physical address 0xff800000. Reading old flash chip contents... done. Erasing and writing flash chip... Transaction error! spi_block_erase_20 failed during command execution at address 0x416000 Reading current flash chip contents... done. Looking for another erase function. spi_block_erase_52 failed during command execution at address 0x410000 Reading current flash chip contents... done. Looking for another erase function. spi_block_erase_d8 failed during command execution at address 0x410000 Reading current flash chip contents... done. Looking for another erase function. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! flashrom -V flashrom v0.9.9-r1954 on Linux 3.16.0-4-686-pae (i686) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian Command line (1 args): flashrom -V Please select a programmer with the --programmer parameter. Previously this was not necessary because there was a default set. To choose the mainboard of this computer use 'internal'. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, atavia, it8212, ft2232_spi, serprog, buspirate_spi, dediprog, rayer_spi, pony_spi, nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, satamv, linux_spi, usbblaster_spi, pickit2_spi, ch341a_spi. -- Best Regards, Davinder

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom April 2016