flashrom January 2016

flashrom@flashrom.org

37 participants
98 discussions

[commit] r1911 - trunk
by repository service 07 Jan '16

07 Jan '16

Author: stefanct Date: Thu Jan 7 18:45:59 2016 New Revision: 1911 URL: http://flashrom.org/trac/flashrom/changeset/1911 Log: Make make errors more less flashily. Previously we have hid almost all error messages from called tools like pkg-config or the compiler in the "configure" step. Only exceptions were the library checks because Carl-Daniel felt it improved usability in case of missing headers etc. However, this makes the output of the makefile less readable and in the case of pkg-config fallbacks the error messages are actually expected. Instead of throwing a part of the detailed stderr outputs of the tools into the face of the users and completely hiding others, write all of them into a separate log file instead. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ (props changed) trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Thu Jan 7 10:50:26 2016 (r1910) +++ trunk/Makefile Thu Jan 7 18:45:59 2016 (r1911) @@ -37,6 +37,8 @@ CFLAGS ?= -Os -Wall -Wshadow EXPORTDIR ?= . RANLIB ?= ranlib +PKG_CONFIG ?= pkg-config +BUILD_DETAILS_FILE ?= build_details.txt # The following parameter changes the default programmer that will be used if there is no -p/--programmer # argument given when running flashrom. The predefined setting does not enable any default so that every @@ -70,6 +72,8 @@ PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig endif +dummy_for_make_3_80:=$(shell printf "Build started on %s\n\n" "$$(date)" >$(BUILD_DETAILS_FILE)) +debug_shell = $(shell export LC_ALL=C ; { echo 'exec: export LC_ALL=C ; { $(1) ; }' >&2; { $(1) ; } | tee -a $(BUILD_DETAILS_FILE) ; echo >&2 ; } 2>>$(BUILD_DETAILS_FILE)) ############################################################################### # General OS-specific settings. # 1. Prepare for later by gathering information about host and target OS @@ -90,7 +94,7 @@ # IMPORTANT: The following line must be placed before TARGET_OS is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. -override TARGET_OS := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) +override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) ifeq ($(TARGET_OS), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include @@ -326,7 +330,7 @@ # IMPORTANT: The following line must be placed before ARCH is ever used # (of course), but should come after any lines setting CC because the line # below uses CC itself. -override ARCH := $(strip $(shell LC_ALL=C $(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) +override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"')) # PCI port I/O support is unimplemented on PPC/MIPS/SPARC and unavailable on ARM. # Right now this means the drivers below only work on x86. @@ -615,14 +619,14 @@ ifeq ($(CONFIG_FT2232_SPI), yes) # This is a totally ugly hack. -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'") +FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'") NEED_FTDI := yes PROGRAMMER_OBJS += ft2232_spi.o endif ifeq ($(CONFIG_USBBLASTER_SPI), yes) # This is a totally ugly hack. -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'") +FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'") NEED_FTDI := yes PROGRAMMER_OBJS += usbblaster_spi.o endif @@ -634,11 +638,11 @@ endif ifeq ($(NEED_FTDI), yes) -FTDILIBS := $(shell [ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; pkg-config --libs libftdi1 || pkg-config --libs libftdi || printf "%s" "-lftdi -lusb") -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'") -FTDI_INCLUDES := $(shell [ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; pkg-config --cflags-only-I libftdi1) +FTDILIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libftdi1 || $(PKG_CONFIG) --libs libftdi || printf "%s" "-lftdi -lusb") +FEATURE_CFLAGS += $(call debug_shell,grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'") +FTDI_INCLUDES := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --cflags-only-I libftdi1) FEATURE_CFLAGS += $(FTDI_INCLUDES) -FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") +FEATURE_LIBS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") # We can't set NEED_USB here because that would transform libftdi auto-enabling # into a hard requirement for libusb, defeating the purpose of auto-enabling. endif @@ -710,13 +714,13 @@ ifeq ($(CONFIG_LINUX_SPI), yes) # This is a totally ugly hack. -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "LINUX_SPI_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_SPI=1'") +FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_SPI_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_SPI=1'") PROGRAMMER_OBJS += linux_spi.o endif ifeq ($(CONFIG_MSTARDDC_SPI), yes) # This is a totally ugly hack. -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'") +FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'") NEED_LINUX_I2C := yes PROGRAMMER_OBJS += mstarddc_spi.o endif @@ -734,7 +738,7 @@ ifeq ($(NEED_PCI), yes) CHECK_LIBPCI = yes FEATURE_CFLAGS += -D'NEED_PCI=1' -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'") +FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'") PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o ifeq ($(TARGET_OS), NetBSD) @@ -761,7 +765,7 @@ ifeq ($(NEED_USB), yes) CHECK_LIBUSB0 = yes FEATURE_CFLAGS += -D'NEED_USB=1' -USBLIBS := $(shell [ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; pkg-config --libs libusb || printf "%s" "-lusb") +USBLIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libusb || printf "%s" "-lusb") endif ifeq ($(CONFIG_PRINT_WIKI), yes) @@ -769,10 +773,10 @@ CLI_OBJS += print_wiki.o endif -FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'") +FEATURE_CFLAGS += $(call debug_shell,grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'") # We could use PULLED_IN_LIBS, but that would be ugly. -FEATURE_LIBS += $(shell LC_ALL=C grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz") +FEATURE_LIBS += $(call debug_shell,grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz") LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS) OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS) @@ -801,7 +805,7 @@ # This includes all frontends and libflashrom. # We don't use EXEC_SUFFIX here because we want to clean everything. clean: - rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 + rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(BUILD_DETAILS_FILE) @+$(MAKE) -C util/ich_descriptors_tool/ clean distclean: clean @@ -824,11 +828,11 @@ export COMPILER_TEST compiler: featuresavailable - @printf "Checking for a C compiler... " + @printf "Checking for a C compiler... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$COMPILER_TEST" > .test.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >/dev/null && \ - echo "found." || ( echo "not found."; \ - rm -f .test.c .test$(EXEC_SUFFIX); exit 1) + @{ { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >&2 && \ + echo "found." || { echo "not found."; \ + rm -f .test.c .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test$(EXEC_SUFFIX) @printf "Target arch is " @# FreeBSD wc will output extraneous whitespace. @@ -906,43 +910,43 @@ hwlibs: compiler @printf "" > .libdeps ifeq ($(CHECK_LIBPCI), yes) - @printf "Checking for libpci headers... " + @printf "Checking for libpci headers... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$LIBPCI_TEST" > .test.c - @$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >/dev/null && \ - echo "found." || ( echo "not found."; echo; \ - echo "Please install libpci headers (package pciutils-devel)."; \ + @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ + echo "found." || { echo "not found."; echo; \ + echo "Please install libpci headers."; \ echo "See README for more information."; echo; \ - rm -f .test.c .test.o; exit 1) - @printf "Checking version of pci_get_dev... " + rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 + @printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$PCI_GET_DEV_TEST" > .test.c - @$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >/dev/null 2>&1 && \ + @ { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ ( echo "new version (including PCI domain parameter)."; echo "OLD_PCI_GET_DEV := no" >> .libdeps ) || \ - ( echo "old version (without PCI domain parameter)."; echo "OLD_PCI_GET_DEV := yes" >> .libdeps ) - @printf "Checking if libpci is present and sufficient... " - @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) >/dev/null && \ - echo "yes." || ( echo "no."; \ - printf "Checking if libz+libpci are present and sufficient..."; \ - $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >/dev/null && \ - ( echo "yes."; echo "NEEDLIBZ := yes" > .libdeps ) || ( echo "no."; echo; \ + ( echo "old version (without PCI domain parameter)."; echo "OLD_PCI_GET_DEV := yes" >> .libdeps ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE) + @printf "Checking if libpci is present and sufficient... " | tee -a $(BUILD_DETAILS_FILE) + @{ { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) 2>>$(BUILD_DETAILS_FILE) >&2 && \ + echo "yes." || { echo "no."; \ + printf "Checking if libz+libpci are present and sufficient..." ; \ + { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \ + echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo; \ echo "Please install libpci (package pciutils) and/or libz."; \ echo "See README for more information."; echo; \ - rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1) ) + rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) endif ifeq ($(CHECK_LIBUSB0), yes) - @printf "Checking for libusb-0.1/libusb-compat headers... " + @printf "Checking for libusb-0.1/libusb-compat headers... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$LIBUSB0_TEST" > .test.c - @$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >/dev/null && \ - echo "found." || ( echo "not found."; echo; \ + @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \ + echo "found." || { echo "not found."; echo; \ echo "Please install libusb-0.1 headers or libusb-compat headers."; \ echo "See README for more information."; echo; \ - rm -f .test.c .test.o; exit 1) - @printf "Checking if libusb-0.1 is usable... " - @$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >/dev/null && \ - echo "yes." || ( echo "no."; \ + rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 + @printf "Checking if libusb-0.1 is usable... " | tee -a $(BUILD_DETAILS_FILE) + @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >&2 && \ + echo "yes." || { echo "no."; \ echo "Please install libusb-0.1 or libusb-compat."; \ echo "See README for more information."; echo; \ - rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1) + rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1 @rm -f .test.c .test.o .test$(EXEC_SUFFIX) endif @@ -1023,36 +1027,40 @@ features: compiler @echo "FEATURES := yes" > .features.tmp ifeq ($(NEED_FTDI), yes) - @printf "Checking for FTDI support... " + @printf "Checking for FTDI support... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$FTDI_TEST" > .featuretest.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ - ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ) || \ - ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) - @printf "Checking for FT232H support in libftdi... " - @echo "$$FTDI_232H_TEST" >> .featuretest.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ - ( echo "found."; echo "FT232H := yes" >> .features.tmp ) || \ - ( echo "not found."; echo "FT232H := no" >> .features.tmp ) + @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \ + ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ; \ + printf "Checking for FT232H support in libftdi... " ; \ + echo "$$FTDI_232H_TEST" >> .featuretest.c ; \ + { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \ + ( echo "found."; echo "FT232H := yes" >> .features.tmp ) || \ + ( echo "not found."; echo "FT232H := no" >> .features.tmp ) } \ + ) || \ + ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) } \ + 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE) endif ifeq ($(CONFIG_LINUX_SPI), yes) - @printf "Checking if Linux SPI headers are present... " + @printf "Checking if Linux SPI headers are present... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$LINUX_SPI_TEST" > .featuretest.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >/dev/null 2>&1 && \ + @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \ ( echo "yes."; echo "LINUX_SPI_SUPPORT := yes" >> .features.tmp ) || \ - ( echo "no."; echo "LINUX_SPI_SUPPORT := no" >> .features.tmp ) + ( echo "no."; echo "LINUX_SPI_SUPPORT := no" >> .features.tmp ) } \ + 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE) endif ifeq ($(NEED_LINUX_I2C), yes) - @printf "Checking if Linux I2C headers are present... " + @printf "Checking if Linux I2C headers are present... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$LINUX_I2C_TEST" > .featuretest.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >/dev/null 2>&1 && \ + @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \ ( echo "yes."; echo "LINUX_I2C_SUPPORT := yes" >> .features.tmp ) || \ - ( echo "no."; echo "LINUX_I2C_SUPPORT := no" >> .features.tmp ) + ( echo "no."; echo "LINUX_I2C_SUPPORT := no" >> .features.tmp ) } \ + 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE) endif - @printf "Checking for utsname support... " + @printf "Checking for utsname support... " | tee -a $(BUILD_DETAILS_FILE) @echo "$$UTSNAME_TEST" > .featuretest.c - @$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >/dev/null 2>&1 && \ + @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \ ( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) || \ - ( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) + ( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE) @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX)

1 0

[commit] r1910 - trunk
by repository service 07 Jan '16

07 Jan '16

Author: stefanct Date: Thu Jan 7 10:50:26 2016 New Revision: 1910 URL: http://flashrom.org/trac/flashrom/changeset/1910 Log: makefile: fix exports of PKG_CONFIG_LIBDIR for pkg-config calls. The parenthesis pushed the exports into a subshell thus made them useless. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/Makefile Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Mon Jan 4 06:08:40 2016 (r1909) +++ trunk/Makefile Thu Jan 7 10:50:26 2016 (r1910) @@ -634,9 +634,9 @@ endif ifeq ($(NEED_FTDI), yes) -FTDILIBS := $(shell ([ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ); pkg-config --libs libftdi1 || pkg-config --libs libftdi || printf "%s" "-lftdi -lusb") +FTDILIBS := $(shell [ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; pkg-config --libs libftdi1 || pkg-config --libs libftdi || printf "%s" "-lftdi -lusb") FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'") -FTDI_INCLUDES := $(shell ([ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ); pkg-config --cflags-only-I libftdi1) +FTDI_INCLUDES := $(shell [ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; pkg-config --cflags-only-I libftdi1) FEATURE_CFLAGS += $(FTDI_INCLUDES) FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") # We can't set NEED_USB here because that would transform libftdi auto-enabling @@ -761,7 +761,7 @@ ifeq ($(NEED_USB), yes) CHECK_LIBUSB0 = yes FEATURE_CFLAGS += -D'NEED_USB=1' -USBLIBS := $(shell ([ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ); pkg-config --libs libusb || printf "%s" "-lusb") +USBLIBS := $(shell [ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; pkg-config --libs libusb || printf "%s" "-lusb") endif ifeq ($(CONFIG_PRINT_WIKI), yes)

1 0

Re: [flashrom] Proposed changes to flashrom hosting and workflow
by Stefan Tauner 07 Jan '16

07 Jan '16

(I am replying to various messages of the thread within this single email. Hence the quotes below are of different people.) > For those who missed it on IRC, Stefan (Reinauer) has proposed retiring SVN > and patch work in favor of Git and (likely) Gerrit + Jenkins. Maintaining > SVN and Patchwork represents a surprisingly large maintenance burden on top > of Git and Gerrit that coreboot uses. Additionally, many in the community > work around SVN's limitations by mirroring the project at places like > Github anyway. My counterproposal is to use gitub instead of Gerrit. - I really can't stand gerrit's interface. - We (relatively) often get patches from one-time contributors which is way easier on github because "everybody" has an account there and knows how to work with it (and if not it is straight forward compared to gerrit). - We don't really need jenkins. I am not a big fan of CI although I am a fan of build testing (hence flashrom is build tested for over 30 architecture/OS combinations manually). Depending on how it would be to interface my build bot with jenkins it would however be an improvement (not sure if it is worth it though). - The only reason to avoid github for me would be due to its proprietary nature and related problems (lock-in etc). Please give me other reasons if you prefer coreboot.org-hosted gerrit over github. > Though I know stefanct often makes small corrections/modifications to > patches before submitting them (because our code review process makes even > small amounts of back-and-forth comments so cumbersome). At least this way > such changes can be tracked trivially on-line by diffing the N and N-1 > patch revisions in gerrit. The reason is not because the back-and-forth is cumbersome but because I am a perfectionist who does not want to bother others with my annoying views of details and I don't expect anybody to care about these changes like me (this does not always hold). The same goes for commit messages. With Carl-Daniel I do exchange my views about these kind of things *if* there is any exchange that is ;) > If there really is a large demand for a non-svn hosting, I would be open > to using mercurial (as master) because it at least has some sort of > usability and can provide (conceptually limited) version numbers. I have > worked for a few years with mercurial and the version numbers are > extremely helpful even if they are per-branch and only semi-stable. Just to make things clear here: I won't even discuss this option - it is none. If you want to use another VCS management tool/interface then you are free to do so, but you are the only person known to prefer something else than git so you have to take on the burden and not force everybody else to as it has been up to now - this has to and will end. > The auto-tag of every commit sounds like an option I could agree with. > It would preserve the convenience of the global strong svn commit ID > even for git. > However, I don't know if this would be acceptable for Stefan (especially > from a merging perspective). We have the infrastructure for using this kind of version strings since about 2,5 years and there is a patch that would make flashrom use them in prints which is lingering uncommented in the mailing list since August 2013. It might not be exactly what we want eventually, but if there are no comments I'll have to decide on something... My current plan is to do a 0.9.9 release in January 2016 and switch to git afterwards. I'd like to keep patchwork at least for a while and figure out a way to keep the patches. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

5 6

Supported hardware
by Jan van Roessel 05 Jan '16

05 Jan '16

Tried to read the bios of 2 Intel NUC units with flashrom, getting these messages (see below). Verbose log files are attached to this mail. Hope this inputs helps to extend support of flashrom Base Board Information: Manufacturer: Intel Corporation Product Name: NUC5CPYB Found chipset "Intel Braswell" with PCI ID 8086:229c. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Base Board Information: Manufacturer: Intel Corporation Product Name: NUC5i3RYB Found chipset "Intel Broadwell U Premium" with PCI ID 8086:9cc3. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Met vriendelijke groet, JWM (Jan) van Roessel Consultant Techfox (member of the Foxi Group) =================================== Ringbaan Oost 102-037 5013 CD Tilburg Tel: (+31).13.5425551 The Netherlands =================================== http://www.foxi.nl =========================================== De in dit email-bericht verstrekte informatie is vertrouwelijk en uitsluitend bestemd voor de geadresseerde. Het kopiëren van of verstrekken aan en gebruik door derden van deze informatie is niet toegestaan. Door de elektronische verzending van dit bericht kunnen er geen rechten worden ontleend aan de informatie. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Copyright (c) 2016 Foxi Group All world wide rights reserved. ===========================================

1 0

Re: [flashrom] Support...can read BIOS but cannot flash
by David Hendricks 05 Jan '16

05 Jan '16

It looks like EWSR (opcode 0x50) is missing from OPMENU and OPMENU+4. Perhaps a BIOS bug (or bad design)? On Mon, Jan 4, 2016 at 5:30 PM, Mike Keryeski <mike(a)oerinet.net> wrote: > Intel D945GCLF2 motherboard with flash chip SST25LF040A. flashrom seems > to be able to read the BIOS fine, but refuses to flash or erase. > > Here is my output: http://paste.flashrom.org/view.php?id=2856 > > Any ideas would be appreciated > > Thank you, > Mike > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom > -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

ERROR IN GE PRO-M2
by Jose Herrera J.E Suministros y Mas, C.A. 05 Jan '16

05 Jan '16

No how to operate ----------------------------- flashrom v0.9.5.2-r1546 on Linux 3.11.10.10-canaima+ (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (1 args): flashrom -V Calibrating delay loop... OS timer resolution is 1 usecs, 1369M loops per second, delay more than 10% too short (got 80% of expected delay), recalculating... 1663M loops per second, 10 myus = 10 us, 100 myus = 129 us, 1000 myus = 961 us, 10000 myus = 14003 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: " " DMI string system-product-name: "GE PRO-M2." DMI string system-version: "3.0X" DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "GE PRO-M2." DMI string baseboard-version: "3.0X" DMI string chassis-type: "Desktop" W836xx hardware monitor busy, ignoring it. Probably not a Winbond Super I/O Found chipset "SiS 650" with PCI ID 1039:0650. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... Found southbridge 1039:0962 at 00:02:0 OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0xffff, id2 0x00ff Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x1e, id2 0xf4, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0x6a, id2 0x34, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring PCI config space for 00:02:0 reg 0x45 Restoring PCI config space for 00:02:0 reg 0x40 ----------------------------- -- *----* *José Herrera* Operaciones Comerciales J.E Suministros y Mas, C.A. www.jesuministrosymas.com.ve Telefonos de Contacto: +58 243 6721452 +58 414 1448515 +58 426 8326367 @JESYMCA <https://twitter.com/JESYMCA> -- -- -- -- -- -- -- -- ESTIMADO USUARIO, ESTE CORREO NO ES GENERADO POR UNA MAQUINA. CONSIDERE LO SIGUIENTE: SI USTED NO ES CLIENTE DE J.E SUMINISTROS Y MAS, C.A. TOME EN CUENTA QUE ESTE PUEDE RESPONDER A UNOS DE LOS SERVICIOS DE ENVÍO DE CORREO GRATUITO PARA CLIENTES PRESTADO POR J.E SUMINISTROS Y MAS, C.A. DE SER ESTE EL CASO ESTE CORREO DEBE INDICAR EL MOTIVO EN EL ASUNTO Y EN EL CONTENIDO DEBE IR CONTENIDO EL NOMBRE DE LA PERSONA QUE ESTA SOLICITANDO REMITIR EL MISMO. NO EN NECESARIO QUE RESPONDA ESTE CORREO A MENOS QUE USTED CONSIDERE QUE HA RECIBIDO EL MISMO POR EQUIVOCACIÓN FAVOR RESPONDA DE INMEDIATO NOTIFICANDONOS AL RESPECTO PARA QUE VERIFIQUEMOS A LA BREVEDAD. J.E SUMINISTROS Y MAS, C.A. GENTE EN LA QUE USTED PUEDE CONFIAR. -- -- -- -- -- -- -- -- *Antes de imprimir este mensaje, asegúrese de que sea realmente necesario. Proteger el medio ambiente está también en su manos.* -- -- -- -- -- -- -- --

1 0

Support...can read BIOS but cannot flash
by Mike Keryeski 05 Jan '16

05 Jan '16

Intel D945GCLF2 motherboard with flash chip SST25LF040A. flashrom seems to be able to read the BIOS fine, but refuses to flash or erase. Here is my output: http://paste.flashrom.org/view.php?id=2856 Any ideas would be appreciated Thank you, Mike

1 0

[PATCH] Modify strnlen() check for old OSes to check its presence directly
by Andrey Korolyov 04 Jan '16

04 Jan '16

Adding generic check against the function in addition to check for a problematic compiler. Fixes: r1878: Make strnlen() visible in old versions of glibc. Signed-off-by: Andrey Korolyov <andrey(a)xdel.ru> --- flash.h | 2 +- helpers.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/flash.h b/flash.h index 24861ba..3af4c43 100644 --- a/flash.h +++ b/flash.h @@ -260,7 +260,7 @@ void tolower_string(char *str); #ifdef __MINGW32__ char* strtok_r(char *str, const char *delim, char **nextp); #endif -#if defined(__DJGPP__) +#if defined(__DJGPP__) || ! defined(HAVE_STRNLEN) size_t strnlen(const char *str, size_t n); #endif diff --git a/helpers.c b/helpers.c index 7a146c3..cdc87e0 100644 --- a/helpers.c +++ b/helpers.c @@ -92,7 +92,7 @@ char* strtok_r(char *str, const char *delim, char **nextp) #endif /* There is no strnlen in DJGPP */ -#if defined(__DJGPP__) +#if defined(__DJGPP__) || ! defined(HAVE_STRNLEN) size_t strnlen(const char *str, size_t n) { size_t i; -- 1.8.4.5

2 2

[commit] r1909 - trunk
by repository service 04 Jan '16

04 Jan '16

Author: stefanct Date: Mon Jan 4 06:08:40 2016 New Revision: 1909 URL: http://flashrom.org/trac/flashrom/changeset/1909 Log: serial: support arbitrary baud rates on Windows. Available baud rates obviously depend on driver support, but the CBR_ defines used so far are basically only for backwards source compatibility with Win16, so dont bother with them. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/serial.c Modified: trunk/serial.c ============================================================================== --- trunk/serial.c Mon Jan 4 04:05:23 2016 (r1908) +++ trunk/serial.c Mon Jan 4 06:08:40 2016 (r1909) @@ -43,74 +43,77 @@ fdtype sp_fd = SER_INV_FD; -#if IS_WINDOWS -struct baudentry { - DWORD flag; - unsigned int baud; -}; -#define BAUDENTRY(baud) { CBR_##baud, baud }, -#else +/* There is no way defined by POSIX to use arbitrary baud rates. It only defines some macros that can be used to + * specify respective baud rates and many implementations extend this list with further macros, cf. TERMIOS(3) + * and http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=inclu… + * The code below creates a mapping in sp_baudtable between these macros and the numerical baud rates to deal + * with numerical user input. + * + * On Linux there is a non-standard way to use arbitrary baud rates that flashrom does not support (yet), cf. + * http://www.downtowndougbrown.com/2013/11/linux-custom-serial-baud-rates/ + * + * On Windows there exist similar macros (starting with CBR_ instead of B) but they are only defined for + * backwards compatibility and the API supports arbitrary baud rates in the same manner as the macros, see + * http://msdn.microsoft.com/en-us/library/windows/desktop/aa363214(v=vs.85).a… + */ +#if !IS_WINDOWS struct baudentry { int flag; unsigned int baud; }; #define BAUDENTRY(baud) { B##baud, baud }, -#endif -/* I'd like if the C preprocessor could have directives in macros. - * See TERMIOS(3) and http://msdn.microsoft.com/en-us/library/windows/desktop/aa363214(v=vs.85).a… and - * http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=blob;f=inclu… */ static const struct baudentry sp_baudtable[] = { BAUDENTRY(9600) /* unconditional default */ -#if defined(B19200) || defined(CBR_19200) +#ifdef B19200 BAUDENTRY(19200) #endif -#if defined(B38400) || defined(CBR_38400) +#ifdef B38400 BAUDENTRY(38400) #endif -#if defined(B57600) || defined(CBR_57600) +#ifdef B57600 BAUDENTRY(57600) #endif -#if defined(B115200) || defined(CBR_115200) +#ifdef B115200 BAUDENTRY(115200) #endif -#if defined(B230400) || defined(CBR_230400) +#ifdef B230400 BAUDENTRY(230400) #endif -#if defined(B460800) || defined(CBR_460800) +#ifdef B460800 BAUDENTRY(460800) #endif -#if defined(B500000) || defined(CBR_500000) +#ifdef B500000 BAUDENTRY(500000) #endif -#if defined(B576000) || defined(CBR_576000) +#ifdef B576000 BAUDENTRY(576000) #endif -#if defined(B921600) || defined(CBR_921600) +#ifdef B921600 BAUDENTRY(921600) #endif -#if defined(B1000000) || defined(CBR_1000000) +#ifdef B1000000 BAUDENTRY(1000000) #endif -#if defined(B1152000) || defined(CBR_1152000) +#ifdef B1152000 BAUDENTRY(1152000) #endif -#if defined(B1500000) || defined(CBR_1500000) +#ifdef B1500000 BAUDENTRY(1500000) #endif -#if defined(B2000000) || defined(CBR_2000000) +#ifdef B2000000 BAUDENTRY(2000000) #endif -#if defined(B2500000) || defined(CBR_2500000) +#ifdef B2500000 BAUDENTRY(2500000) #endif -#if defined(B3000000) || defined(CBR_3000000) +#ifdef B3000000 BAUDENTRY(3000000) #endif -#if defined(B3500000) || defined(CBR_3500000) +#ifdef B3500000 BAUDENTRY(3500000) #endif -#if defined(B4000000) || defined(CBR_4000000) +#ifdef B4000000 BAUDENTRY(4000000) #endif {0, 0} /* Terminator */ @@ -133,6 +136,7 @@ msg_pinfo("Using slowest possible baudrate: %d.\n", sp_baudtable[0].baud); return &sp_baudtable[0]; } +#endif /* Uses msg_perr to print the last system error. * Prints "Error: " followed first by \c msg and then by the description of the last error retrieved via @@ -169,8 +173,7 @@ return 1; } if (baud >= 0) { - const struct baudentry *entry = round_baud(baud); - dcb.BaudRate = entry->flag; + dcb.BaudRate = baud; } dcb.ByteSize = 8; dcb.Parity = NOPARITY; @@ -233,6 +236,7 @@ msg_pdbg("Actual baud flags are: ispeed: 0x%08lX, ospeed: 0x%08lX\n", (long)cfgetispeed(&observed), (long)cfgetospeed(&observed)); } + // FIXME: display actual baud rate - at least if none was specified by the user. #endif return 0; }

1 0

[commit] r1908 - trunk
by repository service 04 Jan '16

04 Jan '16

Author: stefanct Date: Mon Jan 4 04:05:23 2016 New Revision: 1908 URL: http://flashrom.org/trac/flashrom/changeset/1908 Log: serprog: fix missing device parameter error message on Windows. Previously, flashrom -p serprog didnt notice a completely missing dev= string on Windows. Also, the error message shown if no device name followed contained a misleading "/dev/...". Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/serprog.c Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Mon Jan 4 04:05:15 2016 (r1907) +++ trunk/serprog.c Mon Jan 4 04:05:23 2016 (r1908) @@ -371,6 +371,8 @@ have_device++; } } + +#if !IS_WINDOWS if (device && !strlen(device)) { msg_perr("Error: No device specified.\n" "Use flashrom -p serprog:dev=/dev/device[:baud]\n"); @@ -379,7 +381,6 @@ } free(device); -#if !IS_WINDOWS device = extract_programmer_param("ip"); if (have_device && device) { msg_perr("Error: Both host and device specified.\n" @@ -415,15 +416,20 @@ free(device); return 1; } +#endif free(device); if (!have_device) { +#if IS_WINDOWS + msg_perr("Error: No device specified.\n" + "Use flashrom -p serprog:dev=comN[:baud]\n"); +#else msg_perr("Error: Neither host nor device specified.\n" "Use flashrom -p serprog:dev=/dev/device:baud or " "flashrom -p serprog:ip=ipaddr:port\n"); +#endif return 1; } -#endif if (register_shutdown(serprog_shutdown, NULL)) return 1;

1 0

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom January 2016