flashrom April 2015

flashrom@flashrom.org

23 participants
53 discussions

SST49LF004B: On motherboard Intel Desktop board D915GLVG/D915PLDT 03 not recognise flash chip, not read
by Александр Трубицын 29 Apr '15

29 Apr '15

-- with best regards, Alexander V.Trubitsyn

1 0

Not able to update firmware with flashrom
by Caleb Bartholomew 28 Apr '15

28 Apr '15

Can’t update BIOS with flashrom. BIOS chip is W25Q64FV - Source: Visual confirmation Thanks, Caleb Bartholomew Manager, Software Engineering caleb.bartholomew(a)xi3.com <mailto:caleb.bartholomew@xi3.com> Xi3 Corporation 299 S. Main, Suite 1300 Salt Lake City, UT 84111 t: (801) 478-3848 f: (801) 478-3765 web: www.xi3.com <http://www.xi3.com/>

2 1

Flashing libreboot on x200 using a Shikra
by matcor＠riseup.net 27 Apr '15

27 Apr '15

Hi, I'm trying to flash libreboot to my x200 using a Shikra. When it gets to the "Erasing and writing flash chip" part, it seems to hang, but top shows that flashrom is still using a lot of the CPU. I left it for over 3 hours and it doesn't get any further than my logfile below. Would anyone be able to shed some light as to what might be going on here? Thanks. command: flashrom -p ft2232_spi:type=232H -c "MX25L6405D" -w x200_8mb_usqwerty_vesafb.rom -V 2>&1 | tee logfile output: flashrom v0.9.8-r1889 on Linux 3.17.4-301.fc21.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.3.0, GCC 4.9.2 20150212 (Red Hat 4.9.2-6), little endian Command line (7 args): flashrom -p ft2232_spi:type=232H -c MX25L6405D -w x200_8mb_usqwerty_vesafb.rom -V Calibrating delay loop... OS timer resolution is 1 usecs, 1491M loops per second, 10 myus = 10 us, 100 myus = 119 us, 1000 myus = 1019 us, 10000 myus = 10100 us, 4 myus = 4 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT232H channel A. Disable divide-by-5 front stage Set clock divisor MPSSE clock: 60.000000 MHz, divisor: 2, SPI clock: 30.000000 MHz No loopback of TDI/DO TDO/DI Set data bits The following protocols are supported: SPI. Probing for Macronix MX25L6405D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6405D" (8192 kB, SPI) on ft2232_spi. Chip status register is 0xff. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is set Chip status register: Bit 6 is set Chip status register: Block Protect 3 (BP3) is set Chip status register: Block Protect 2 (BP2) is set Chip status register: Block Protect 1 (BP1) is set Chip status register: Block Protect 0 (BP0) is set Chip status register: Write Enable Latch (WEL) is set Chip status register: Write In Progress (WIP/BUSY) is set This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Some block protection in effect, disabling... Need to disable the register lock first... Error: WIP bit after WRSR never cleared spi_write_status_register failed. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:E

2 5

Re: [flashrom] Help
by Stefan Tauner 27 Apr '15

27 Apr '15

On Sun, 26 Apr 2015 21:28:29 -0700 Khoirul Anam <uoen.ka(a)gmail.com> wrote: > I have die computer. My view is there problem at mobo (jetway > MI5-G41SGMD3-LF). How can I flashrom on it while the computer doesnt reach > bios mode ?. Please help me Hi, you need an external programmer (or another mainboard) to write the flash chip if the respective mainboard does no longer boot (nor provide any other means of recovery). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Help
by Khoirul Anam 26 Apr '15

26 Apr '15

I have die computer. My view is there problem at mobo (jetway MI5-G41SGMD3-LF). How can I flashrom on it while the computer doesnt reach bios mode ?. Please help me

1 0

W25X40: Asrock G31M-GS rev. G/A 2.04 successfully reflash from BIOS P1.80 05/20/2011 to BIOS P1.90 05/16/2012
by Александр Трубицын 21 Apr '15

21 Apr '15

Hi! I successfully reflash Asrock G31M-GS rev G/A2.04 motherboard from BIOS P1.80 05/20/2011 to BIOS P1.90 05/16/2012 with your tool. Thank you! -- With best regards, Alexander Trubitsyn

1 0

Gigabyte H55M-S2H with 2 Macronix MX25L6465EM2I flash chips
by Александр Трубицын 21 Apr '15

21 Apr '15

Hello! I have Gigabyte H55M-S2H motherboard with 2 MX25L6465EM2I SPI flash chips, but now flashrom asks me to choose from 3 different chips: Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E" Please specify which chip definition to use with the -c <chipname> option. I find chip datasheet where: http://www.datasheetarchive.com/dl/Datasheets-IS78/DSAH00369299.pdf In the table 6 (ID Definitions) of this datasheet we can see RDID=0x2017 1. Is it possible to use one of supposed chip or a new one? 2. Can you add comment about MX25L6465 in the flashchips.h after MX25L6405 or new definition in flashchips.c ? 3. Is it possible to determine flash chip by RDID and RES (Read Electronic Signature)? -- Best regards Alexander.V Trubitsyn

2 2

2. Re: Flashrom to flash video cards (Carl-Daniel Hailfinger)
by nicolae788 . 20 Apr '15

20 Apr '15

Hi Carl, I found two applications for flashing ati cards. One it's executed under win environment and the other it's flashrom.exe and it works under DOS. Anyway the problem had been solved and i just wanted to know if flashrom has a native support for flashing video cards. Thank you very much for your kindness! On Apr 20, 2015 1:00 PM, <flashrom-request(a)flashrom.org> wrote: > Send flashrom mailing list submissions to > flashrom(a)flashrom.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.flashrom.org/mailman/listinfo/flashrom > or, via email, send a message with subject or body 'help' to > flashrom-request(a)flashrom.org > > You can reach the person managing the list at > flashrom-owner(a)flashrom.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of flashrom digest..." > > > Today's Topics: > > 1. Re: Flashrom to flash video cards (nicolae788 .) > 2. Re: Flashrom to flash video cards (Carl-Daniel Hailfinger) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 20 Apr 2015 03:11:31 +0300 > From: "nicolae788 ." <nicolae788(a)gmail.com> > To: flashrom(a)flashrom.org > Subject: Re: [flashrom] Flashrom to flash video cards > Message-ID: > <CAE076VDZDJSs9x_siQ+83V4etr= > VfauDvpw_qvb1WZJnr5bOtQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi, excuse me for the delay. I found it on a russian website, but can't > remember the address, i just copied it and put it for later use if needed, > however i do not know if it's working. > > Hope this helps. > > Alex > On Apr 19, 2015 10:59 AM, "Stefan Tauner" < > stefan.tauner(a)alumni.tuwien.ac.at> > wrote: > > > On Sat, 18 Apr 2015 16:42:54 +0300 > > "nicolae788 ." <nicolae788(a)gmail.com> wrote: > > > > > Hi, thank you very much for your reply. I understand that flashrom > > > currently doesn't have the posibility to access the pcie slot, for > > example, > > > and detect the chip on the vga board in order to write it. However i > > found > > > a flashrom, apparently modified for ati vga cards...do you want me to > > send > > > it to you and check it? > > > > I am only aware of http://patchwork.coreboot.org/patch/1001/ > > Where did you find whatever you have found? > > > > -- > > Kind regards/Mit freundlichen Gr??en, Stefan Tauner > > >

1 0

W836xx: P170HMx: flashrom -V
by Alessandro Luigi Sellerio 20 Apr '15

20 Apr '15

:~$ sudo flashrom -V -p internal flashrom v0.9.7-r1782 on Linux 3.16.0-34-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian Command line (3 args): flashrom -V -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 3159M loops per second, 10 myus = 10 us, 100 myus = 124 us, 1000 myus = 1035 us, 10000 myus = 10087 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Notebook" Laptop detected via DMI. DMI string system-manufacturer: "CLEVO " DMI string system-product-name: "P170HMx" DMI string system-version: "Not Applicable " DMI string baseboard-manufacturer: "CLEVO " DMI string baseboard-product-name: "P170HMx" DMI string baseboard-version: "Not Applicable " W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE EC, ID 0x8519, Rev 0x02 on port 0x2e. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Re: [flashrom] Flashrom to flash video cards
by Carl-Daniel Hailfinger 19 Apr '15

19 Apr '15

Hi Alex, there is another tool called ati flashrom 2.40 which is unrelated to flashrom.org. Maybe the tool you're talking about is ati flashrom, not flashrom.org flashrom with video card patches. Regards, Carl-Daniel On 20.04.2015 02:11, nicolae788 . wrote: > Hi, excuse me for the delay. I found it on a russian website, but can't > remember the address, i just copied it and put it for later use if needed, > however i do not know if it's working. > > Hope this helps. > > Alex > On Apr 19, 2015 10:59 AM, "Stefan Tauner" <stefan.tauner(a)alumni.tuwien.ac.at> > wrote: > >> On Sat, 18 Apr 2015 16:42:54 +0300 >> "nicolae788 ." <nicolae788(a)gmail.com> wrote: >> >>> Hi, thank you very much for your reply. I understand that flashrom >>> currently doesn't have the posibility to access the pcie slot, for >>> example, and detect the chip on the vga board in order to write it. >>> However i found a flashrom, apparently modified for ati vga cards... >>> do you want me to send it to you and check it? >> I am only aware of http://patchwork.coreboot.org/patch/1001/ >> Where did you find whatever you have found? >> >> -- >> Kind regards/Mit freundlichen Grüßen, Stefan Tauner >>

1 0

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom April 2015