Hello everyone,
I have just discovered flashrom, and was intrigued to find that it's
possible to write PLCC chips by using an old PCI ethernet card. I have thus
acquired for real cheap an SMC1211 card which is correctly identified by my
Debian install:
00:0b.0 0200: 1113:1211 (rev 10)
I have an old BIOS chip, a PMC Pm49FL004T-33JCE that I would like to work
on, but flashrom does not seem to recognise the chip, and a verbose dump
did not help either, here is the dump:
---
# flashrom -p nicrealtek:pci=0:b.0 -VV
flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-686-pae (i686)
flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian
Command line (5 args): flashrom -p nicrealtek:pci=0:b.0 -VV -o probe2.log
Calibrating delay loop... OS timer resolution is 1 usecs, 1865M loops per
second, 10 myus = 10 us, 100 myus = 101 us, 1000 myus = 1035 us, 10000 myus
= 10063 us, 4 myus = 4 us, OK.
Initializing nicrealtek programmer
Found "SMC2 1211TX" (1113:1211, BDF 00:0b.0).
Requested BAR is I/O
The following protocols are supported: Parallel.
Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x0000, id2
0x0000
Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0x00,
id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x00, id2 0x00, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old
Winbond W29* probe method disabled because the probing sequence puts the
AMIC A49LF040A in a funky state. Use 'flashrom -c
W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a
chip.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB:
probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal
flash content, id2 is normal flash content
Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1
0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
---
Now, the Pm49FL004 is a 512k chip, and I see that flashrom probes for many
different types of 512k chips, so this means that the nicrealtek program
should be able to address the 512k chips. So why does the PMC list of chips
probed does not include the Pm49FL004, but only shows these chips:
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2
0x00, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
I check the flashchips.c file and thus I presume the issue lies in the fact
that Pm49FL004 only supports LPC and FWH and not the BUS_PARALLEL access,
so I am out of luck with the nicrealtek.c strategy.
Can anything be done at the nicrealtek.c level to support LPC, or is it a
hardware limitation of the ethernet NIC?
What other hardware could I use in order to read and write the Pm49FL004
chip, other than a stand-alone programmer?
Thanks for any support given!
Best regards,
Luca Bertagnolio