flashrom October 2013

flashrom@flashrom.org

22 participants
121 discussions

W836xx: Aspire 8930: flashrom -V
by DpakoH 14 Oct '13

14 Oct '13

# flashrom -V flashrom v0.9.5.2-r1546 on Linux 3.10-3-686-pae (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (1 args): flashrom -V Calibrating delay loop... OS timer resolution is 1 usecs, 1863M loops per second, 10 myus = 11 us, 100 myus = 95 us, 1000 myus = 935 us, 10000 myus = 9859 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Acer" DMI string system-product-name: "Aspire 8930" DMI string system-version: "V1.10" DMI string baseboard-manufacturer: "Acer" DMI string baseboard-product-name: "Aspire 8930" DMI string baseboard-version: "PSMBOU-1234567" DMI string chassis-type: "Other" DMI chassis-type is not specific enough. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. # superiotool -d superiotool r6637 Found ITE IT8512E/F/G (id=0x8512, rev=0x0) at 0x2e Register dump: idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e val 85 12 60 01 00 00 00 00 00 00 00 00 01 00 00 def 85 12 22 01 NA 00 00 NA NA NA NA NA NA 00 NA LDN 0x04 (System Wake-Up) idx 30 60 61 62 63 70 71 val 01 00 00 00 00 00 01 def 00 00 00 00 00 00 03 LDN 0x05 (Mouse) idx 30 60 61 62 63 70 71 f0 val 01 00 00 00 00 0c 01 00 def 00 00 00 00 00 0c 03 NA LDN 0x06 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 01 00 def 00 00 60 00 64 01 03 NA LDN 0x0f (Shared Memory/Flash) idx 30 60 61 62 63 70 71 f4 f5 f6 val 01 02 00 00 00 00 00 09 00 00 def 00 00 00 00 00 00 00 00 00 00 LDN 0x10 (BRAM) idx 30 60 61 62 63 70 71 f3 f4 f5 val 01 00 70 06 00 08 01 00 3f 3f def 00 00 70 00 72 08 00 NA NA NA LDN 0x11 (Power Channel 1) idx 30 60 61 62 63 70 71 val 01 00 62 00 66 00 01 def 00 00 62 00 66 01 03 LDN 0x12 (Power Channel 2) idx 30 60 61 62 63 70 71 val 01 00 68 00 6c 00 01 def 00 00 68 00 6c 01 03 Found SMSC SCH5317 (id=0x85, rev=0x12) at 0x2e No dump available for this Super I/O # sensors acpitz-virtual-0 Adapter: Virtual device temp1: +39.0°C (crit = +106.0°C) temp2: +77.0°C (crit = +106.0°C) temp3: +79.0°C (crit = +106.0°C) temp4: +40.0°C (crit = +106.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +27.0°C (high = +90.0°C, crit = +90.0°C) Core 1: +27.0°C (high = +90.0°C, crit = +90.0°C) ¯\(º_o)/¯

1 0

Phonenix_efi bios flash map
by Ricardo Ribalda Delgado 14 Oct '13

14 Oct '13

Hello I have a board that uses a phoenix_efi secure core Tiano BIOS. I can read and write it properly using flashrom. Good work guys! Unfortunatelly every time I reboot the machine, I read back a different content of the flash. I guess there are some variables that the bios set on boot. Is there a way to get a "bios map" of what areas are code and what areas are data? I want to monitor if the flash is corrupted. BTW. Anything I could do to help merge the nic_intel_eeprom patches? Regards! -- Ricardo Ribalda

1 0

[PATCH] serprog: optimize serial buffer handling
by Urja Rannikko 14 Oct '13

14 Oct '13

Now we remember the size of each sent command, and allow us to continue when enough ACKs have been received, instead of all the ACKs. This is done with an internal FIFO storing the sizes. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ---- Note: I did calculate that the maximum FIFO size (memory allocation) that the device can make flashrom do is 256k - 4 bytes. I think this is acceptable, and makes the code overflow-proof. Also, since SPI API could TX a command over 2^24 bytes long (7+(2^24-1)), we use uint32_t's to store the size so it will always fit. --- serprog.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 75 insertions(+), 17 deletions(-) diff --git a/serprog.c b/serprog.c index 03963ec..89affab 100644 --- a/serprog.c +++ b/serprog.c @@ -75,6 +75,9 @@ static uint32_t sp_write_n_bytes = 0; /* sp_streamed_* used for flow control checking */ static int sp_streamed_transmit_ops = 0; static int sp_streamed_transmit_bytes = 0; +static uint32_t * sp_stream_txop_sizes = NULL; /* Size: ..._serbuf_size * sizeof uint32_t */ +static int sp_stream_txop_wroff = 0; /* Used when sending. */ +static int sp_stream_txop_rdoff = 0; /* Used when receiving ACKs */ /* sp_opbuf_usage used for counting the amount of on-device operation buffer used */ @@ -204,8 +207,28 @@ static int sp_automatic_cmdcheck(uint8_t cmd) return 0; } -static int sp_flush_stream(void) +static void sp_stream_add_txop(uint32_t size) +{ + sp_streamed_transmit_ops += 1; + sp_streamed_transmit_bytes += size; + sp_stream_txop_sizes[sp_stream_txop_wroff++] = size; + if (sp_stream_txop_wroff >= sp_device_serbuf_size) + sp_stream_txop_wroff = 0; +} + +static uint32_t sp_stream_rm_txop(void) { + uint32_t size = sp_stream_txop_sizes[sp_stream_txop_rdoff++]; + if (sp_stream_txop_rdoff >= sp_device_serbuf_size) + sp_stream_txop_rdoff = 0; + sp_streamed_transmit_bytes -= size; + sp_streamed_transmit_ops -= 1; + return size; +} + +static int sp_stream_free_bytes(uint32_t need_freed) +{ + uint32_t freed = 0; if (sp_streamed_transmit_ops) do { unsigned char c; @@ -221,7 +244,37 @@ static int sp_flush_stream(void) msg_perr("Error: Invalid reply 0x%02X from device\n", c); return 1; } - } while (--sp_streamed_transmit_ops); + freed += sp_stream_rm_txop(); + if (freed >= need_freed) break; + } while (sp_streamed_transmit_ops); + return 0; +} + +static int sp_verify_stream_free(uint32_t size) +{ + /* Allow for device accounting "error" of 1 byte. There might be many + serial implementations with an n byte buffer, but that fail if it + were to be full with n bytes (wroff==rdoff). */ + uint32_t bytes_free = (sp_device_serbuf_size - sp_streamed_transmit_bytes)-1; + if (bytes_free < size) { + uint32_t need_freed = size - bytes_free; + return sp_stream_free_bytes(need_freed); + } + return 0; +} + +static int sp_flush_stream(void) +{ + msg_pspew(MSGHEADER "flushing stream (%d ops, %d bytes)\n", + sp_streamed_transmit_ops, sp_streamed_transmit_bytes); + + if (sp_stream_free_bytes(sp_streamed_transmit_bytes)) + return 1; + + if (sp_streamed_transmit_bytes != 0) + msg_pdbg(MSGHEADER "stream size accounting error (%d bytes)\n", + sp_streamed_transmit_bytes); + sp_streamed_transmit_ops = 0; sp_streamed_transmit_bytes = 0; return 0; @@ -265,6 +318,7 @@ static int sp_docommand(uint8_t command, uint32_t parmlen, return 0; } + static int sp_stream_buffer_op(uint8_t cmd, uint32_t parmlen, uint8_t *parms) { uint8_t *sp; @@ -279,19 +333,15 @@ static int sp_stream_buffer_op(uint8_t cmd, uint32_t parmlen, uint8_t *parms) sp[0] = cmd; memcpy(&(sp[1]), parms, parmlen); - if (sp_streamed_transmit_bytes >= (1 + parmlen + sp_device_serbuf_size)) { - if (sp_flush_stream() != 0) { - free(sp); - return 1; - } - } + if (sp_verify_stream_free(1+parmlen)) + return 1; + if (serialport_write(sp, 1 + parmlen) != 0) { msg_perr("Error: cannot write command\n"); free(sp); return 1; } - sp_streamed_transmit_ops += 1; - sp_streamed_transmit_bytes += 1 + parmlen; + sp_stream_add_txop(1+parmlen); free(sp); return 0; @@ -634,6 +684,13 @@ int serprog_init(void) msg_pdbg(MSGHEADER "Serial buffer size is %d\n", sp_device_serbuf_size); + sp_stream_txop_sizes = malloc(sp_device_serbuf_size*sizeof(uint32_t)); + if (!sp_stream_txop_sizes) { + msg_perr("Error: cannot allocate memory for " + "serial tx size history buffer\n"); + return 1; + } + if (sp_check_commandavail(S_CMD_O_INIT)) { /* This would be inconsistent. */ if (sp_check_commandavail(S_CMD_O_EXEC) == 0) { @@ -694,11 +751,9 @@ static int sp_pass_writen(void) { unsigned char header[7]; msg_pspew(MSGHEADER "Passing write-n bytes=%d addr=0x%x\n", sp_write_n_bytes, sp_write_n_addr); - if (sp_streamed_transmit_bytes >= (7 + sp_write_n_bytes + sp_device_serbuf_size)) { - if (sp_flush_stream() != 0) { - return 1; - } - } + if (sp_verify_stream_free(7+sp_write_n_bytes)) + return 1; + /* In case it's just a single byte send it as a single write. */ if (sp_write_n_bytes == 1) { sp_write_n_bytes = 0; @@ -726,8 +781,7 @@ static int sp_pass_writen(void) msg_perr(MSGHEADER "Error: cannot write write-n data"); return 1; } - sp_streamed_transmit_bytes += 7 + sp_write_n_bytes; - sp_streamed_transmit_ops += 1; + sp_stream_add_txop(7+sp_write_n_bytes); sp_opbuf_usage += 7 + sp_write_n_bytes; sp_write_n_bytes = 0; sp_prev_was_write = 0; @@ -778,6 +832,10 @@ static int serprog_shutdown(void *data) serialport_shutdown(&sp_fd); if (sp_max_write_n) free(sp_write_n_buf); + + if (sp_stream_txop_sizes) + free(sp_stream_txop_sizes); + return 0; } -- 1.8.4

1 0

[PATCH] serprog: flush stream in sp_docommand
by Urja Rannikko 14 Oct '13

14 Oct '13

This is to prevent bugs in the future - currently sp_docommand is not called with operations in flight, but this makes it safe. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ----- The patch also moves sp_flush_stream above sp_docommand... --- serprog.c | 51 ++++++++++++++++++++++++++++----------------------- 1 file changed, 28 insertions(+), 23 deletions(-) diff --git a/serprog.c b/serprog.c index d7483cf..03963ec 100644 --- a/serprog.c +++ b/serprog.c @@ -204,12 +204,40 @@ static int sp_automatic_cmdcheck(uint8_t cmd) return 0; } +static int sp_flush_stream(void) +{ + if (sp_streamed_transmit_ops) + do { + unsigned char c; + if (serialport_read(&c, 1) != 0) { + msg_perr("Error: cannot read from device (flushing stream)"); + return 1; + } + if (c == S_NAK) { + msg_perr("Error: NAK to a stream buffer operation\n"); + return 1; + } + if (c != S_ACK) { + msg_perr("Error: Invalid reply 0x%02X from device\n", c); + return 1; + } + } while (--sp_streamed_transmit_ops); + sp_streamed_transmit_ops = 0; + sp_streamed_transmit_bytes = 0; + return 0; +} + static int sp_docommand(uint8_t command, uint32_t parmlen, uint8_t *params, uint32_t retlen, void *retparms) { unsigned char c; if (sp_automatic_cmdcheck(command)) return 1; + + if (sp_flush_stream() != 0) { + return 1; + } + if (serialport_write(&command, 1) != 0) { msg_perr("Error: cannot write op code: %s\n", strerror(errno)); return 1; @@ -237,29 +265,6 @@ static int sp_docommand(uint8_t command, uint32_t parmlen, return 0; } -static int sp_flush_stream(void) -{ - if (sp_streamed_transmit_ops) - do { - unsigned char c; - if (serialport_read(&c, 1) != 0) { - msg_perr("Error: cannot read from device (flushing stream)"); - return 1; - } - if (c == S_NAK) { - msg_perr("Error: NAK to a stream buffer operation\n"); - return 1; - } - if (c != S_ACK) { - msg_perr("Error: Invalid reply 0x%02X from device\n", c); - return 1; - } - } while (--sp_streamed_transmit_ops); - sp_streamed_transmit_ops = 0; - sp_streamed_transmit_bytes = 0; - return 0; -} - static int sp_stream_buffer_op(uint8_t cmd, uint32_t parmlen, uint8_t *parms) { uint8_t *sp; -- 1.8.4

1 0

[PATCH] serprog: stream SPI operations (speed improvement)
by Urja Rannikko 14 Oct '13

14 Oct '13

this means less RTT waiting when you dont need to wait for the ACK of a wren before write, etc. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> --- serprog.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/serprog.c b/serprog.c index 5b96e8a..d7483cf 100644 --- a/serprog.c +++ b/serprog.c @@ -907,8 +907,10 @@ static int serprog_spi_send_command(struct flashctx *flash, unsigned char *parmbuf; int ret; msg_pspew("%s, writecnt=%i, readcnt=%i\n", __func__, writecnt, readcnt); + + /* Stream the spi operation (as read-n above). */ if ((sp_opbuf_usage) || (sp_max_write_n && sp_write_n_bytes)) { - if (sp_execute_opbuf() != 0) { + if (sp_execute_opbuf_noflush() != 0) { msg_perr("Error: could not execute command buffer before sending SPI commands.\n"); return 1; } @@ -926,8 +928,20 @@ static int serprog_spi_send_command(struct flashctx *flash, parmbuf[4] = (readcnt >> 8) & 0xFF; parmbuf[5] = (readcnt >> 16) & 0xFF; memcpy(parmbuf + 6, writearr, writecnt); - ret = sp_docommand(S_CMD_O_SPIOP, writecnt + 6, parmbuf, readcnt, - readarr); + + ret = sp_stream_buffer_op(S_CMD_O_SPIOP, writecnt + 6, parmbuf); + + if ((!ret)&&(readcnt)) { + if (sp_flush_stream() != 0) { + free(parmbuf); + return 1; + } + if (serialport_read(readarr, readcnt) != 0) { + free(parmbuf); + msg_perr(MSGHEADER "Error: cannot read spiop data"); + return 1; + } + } free(parmbuf); return ret; } -- 1.8.4

1 0

[PATCH] serprog: add proper serprog_map
by Urja Rannikko 14 Oct '13

14 Oct '13

Add serprog_map so that chips are addressed properly. I did this for adding LPC support to my ATmega644 programmer. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> ----- This is a re-submit because the old patch from 2011 had gotten bit-rotten (didnt apply cleanly). --- flashrom.c | 2 +- programmer.h | 1 + serprog.c | 13 +++++++++++++ 3 files changed, 15 insertions(+), 1 deletion(-) diff --git a/flashrom.c b/flashrom.c index afab57c..8831e36 100644 --- a/flashrom.c +++ b/flashrom.c @@ -191,7 +191,7 @@ const struct programmer_entry programmer_table[] = { /* FIXME */ .devs.note = "All programmer devices speaking the serprog protocol\n", .init = serprog_init, - .map_flash_region = fallback_map, + .map_flash_region = serprog_map, .unmap_flash_region = fallback_unmap, .delay = serprog_delay, }, diff --git a/programmer.h b/programmer.h index ef96c9e..6bd49d9 100644 --- a/programmer.h +++ b/programmer.h @@ -654,6 +654,7 @@ int register_programmer(struct registered_programmer *pgm); /* serprog.c */ #if CONFIG_SERPROG == 1 int serprog_init(void); +void *serprog_map(const char *descr, uintptr_t phys_addr, size_t len); void serprog_delay(int usecs); #endif diff --git a/serprog.c b/serprog.c index 237db7d..5b96e8a 100644 --- a/serprog.c +++ b/serprog.c @@ -671,6 +671,19 @@ int serprog_init(void) return 0; } +void *serprog_map(const char *descr, uintptr_t phys_addr, size_t len) +{ + if ((phys_addr & 0xFF000000) == 0xFF000000) { + msg_pspew("Serprog map '%s' giving low 24 bits of phys_addr (0x%06X)\n", + descr,(unsigned int)(phys_addr & 0xFFFFFF)); + return (void*)(phys_addr & 0xFFFFFF); + } else { + msg_pdbg("Serprog-incompatible mapping '%s' phys_addr 0x%08X len %d, returning NULL\n", + descr,(unsigned int)phys_addr,len); + return NULL; + } +} + /* Move an in flashrom buffer existing write-n operation to the on-device operation buffer. */ static int sp_pass_writen(void) { -- 1.8.4

1 0

Re: [flashrom] acer c7 can't read or write
by Stefan Tauner 12 Oct '13

12 Oct '13

On Wed, 9 Oct 2013 14:33:34 -0700 Johnny Bazookatone <blanka.buranka(a)gmail.com> wrote: > So I managed to flash my chromebook with a Coreboot Seabios payload by > following this tutorial > https://docs.google.com/presentation/d/1eGPMu03vCxIO0a3oNX8Hmij_Qwwz6R6ViFC… > > I managed to install Ubuntu 12.04 using my flash drive.... and became very > dissapointed that my touchpad didn't work.. So I tried to recompile stock > firmware and tried to use flashrom within Ubuntu to go back...but I can't > seem to get it to write... So am I going to have to buy a bus pirate to > reflash?? I think you just need to use google's fork of flashrom. Unfortunately both branches of flashrom diverged quite a bit since then... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Flashrom with Serprog/Arduino on nano v3
by flashrom＠secure-proxy.org 12 Oct '13

12 Oct '13

Hello, i try to read SPI flash from a bricked wifi access point. For that purpose I have unsoldered the 4M SPI flash, soldered it onto an ssop-breakout board where I connected it to an Arduino-Nano. I use flashrom out of my ubuntu distribution, and compiled serprog-duino myself. Running flashrom to detect the device works as expected: ------------ $ flashrom -p serprog:dev=/dev/ttyUSB0:2000000 flashrom v0.9.5.2-r1517 on Linux 3.2.0-54-generic-pae (i686), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. serprog: Programmer name is "serprog-duino" Found Macronix flash chip "MX25L3205" (4096 kB, SPI) on serprog. No operations were specified. ------------ However when I add the "-r filename" Option, to read the content of the flash, the program get stuck. I tried the master and the ftdi-branch from serprog-duino [the only difference is, that in the ftdi-branch the 10us delay is missing], with no difference in behaviour. I tried both versions with both cabling-recommendations: firsthand with the resistors as voltage-dividers, than with direct 5cm cables. In all combinations flashrom is hanging during a read-statement. The strace looks in all cases like (+-5 lines): ------------ write(1, "Note: serprog_delay used, but th"..., 67Note: serprog_delay used, but the programmer doesn't support delay ) = 67 write(3, "\23", 1) = 1 write(3, "\1\0\0\2\0\0\5", 7) = 7 read(3, "\6", 1) = 1 read(3, "\0\0", 2) = 2 mmap2(NULL, 4198400, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7104000 write(1, "Reading flash... ", 17Reading flash... ) = 17 write(3, "\23", 1) = 1 write(3, "\4\0\0\0\0\1\3\0\0\0", 10) = 10 read(3, "\6", 1) = 1 read(3, "'\5\31V\267\205%\3Q\332+\3\0\1\257\10\200 \0\0\200 \0\0\207\312\302\340\5\5\1\0"..., 65536) = 339 read(3, "\0\20\0\0\0\0\255\1\0\20\0\0\0\0\253\1\0\20\0\0\0\0\251\1\0\20\0\0\0\0\247\1"..., 65197) = 429 read(3, "\0\20\0\0\0\0\27\1\0\20\0\0\0\0\25\1\0\20\0\0\0\0\24\1\0\20\200\3\32$\21\1"..., 64768) = 391 read(3, "\0\0\0\313\275\377\377\357!\375\377\340\25 p\313\1\0\200\v@\200]\v\0B_\v\0\1\0\17"..., 64377) = 385 read(3, "\0\0\0\0\0,\257\343\254!0\240\0\10\0\340\3!\20\300\0\2\0\34<\220\240\234'!\340\231"..., 63992) = 395 read(3, "\0'!\340\231\3\340\377\275'\30\0\277\257\20\0\274\257\20\0\204\217L\4\231\217\t\370 \3\364i"..., 63597) = 387 read(3, "\0\t\370 \3! `\2\20\0\274\217!0@\0! \0\2\240\3\231\217\t\370 \3!(`"..., 63210) = 408 read(3, "\0\200\0\6$\t\370 \3\230\0\276'\20\0\274\217! \300\3!(\0\0\234\1\231\217\200\0\6"..., 62802) = 424 read(3, "\0!\20 \0#\20A\0\6\0@\20\370\377\242&h\1\203\217\0\0b\214\1\0B$\0\0b"..., 62378) = 293 read(3, "\0\244'\20\0\274\217L\4\231\217\230\0\260'!(\0\2\t\370 \3`k\344&\20\0\274\217\354"..., 62085) = 465 read(3, "\0\0@\20\30\0\274\217\20\0\220\217L\4\231\217\t\370 \3\330l\4&\30\0\274\217\20\0\204\217"..., 61620) = 309 read(3, "\0\0\274\217\20\0\204\217L\4\231\217\t\370 \3\24m\204$\377\377\0\20\0\0\0\0$\0c\256"..., 61311) = 478 read(3, "\0\204$\t\370 \3 n\306$\30\0\274\217\20\0\5$\20\0\204\217L\4\231\217\t\370 \3$"..., 60833) = 386 read(3, "\0\2\20\246p\20\0\204\217L\4\231\217!8\0\1Do\204$\2\0\23$\2\20Hp\t\370 "..., 60447) = 408 read(3, "\0\4p\204$\10\0\0\20\30\0\274\217\20\2\231\217\1\0001&\t\370 \3\20'\4$d\0\""..., 60039) = 411 read(3, "\0\0\0\0B\214!\20\\\0\10\0@\0L\4\231\217\20\0\204\217\1\0\5$H\0\260'\t\370"..., 59628) = 390 read(3, "\0\30\0\274\217!8 \2! \200\2\244\2\231\217!(\0\0p\0\0\20\1\0\6$\20\0\204"..., 59238) = 352 read(3, "\0!(\0\0\30\0\274\217!8\0\2! \200\2\244\2\231\217!(\0\0\v\0\0\20\3\0\6"..., 58886) = 352 read(3, "\0$\20\0\302\24\334\0\231\217\10\0\4\216!(\0\0\t\370 \3\n\0\6$\20\0\274\217\f\0"..., 58534) = 351 read(3, "\234'!\340\231\3\320\377\275'(\0\277\257$\0\263\257 \0\262\257\34\0\261\257\30\0\260\257\20\0"..., 58183) = 401 read(3, "$!\30\220\0\1\0\204$\20\0\202(\374\377@\24\10\0`\240P\3\202\217\0\0#\216\0\0D"..., 57782) = 390 read(3, "\3\330s\204$!(@\0\20\0\274\217\32\0@\20!\210\0\0\20\0\202\217! \240\0`pB"..., 57392) = 400 read(3, "\0\0,\0\206\217T\4\220\217\0\0\303\214#\30C\0\271\3\2<\240\254B4+\20C\0\30\0"..., 56992) = 470 read(3, "\0\0\260\217\10\0\340\0030\0\275'\1\0\34<\204y\234'!\340\231\3\270\377\275'@\0\277\257"..., 56522) = 465 read(3, "\0\10\0\340\3\v\20\203\0\0\0\242\220\"\0\7$\3\0G\24\0\0\0\0\1\0\245$\377\377\306"..., 56057) = 462 read(3, "\232\1I\20\356\377\10%\16\0\244\226\20\0\245\226\377\0\2030\377\0\2420\0\32\3\0\2\"\4\0"..., 55595) = 207 read(3, "\0000\0\32\3\0\2\22\2\0%\30b\0\0\10\2$\7\0b\20\20\0\204\217L\4\231\217\214t"..., 55388) = 392 read(3, "\0\3\30\0\242\257 \0\274\217,\0\244'\16\0\205&\240\3\231\217\t\370 \3\4\0\6$ \0"..., 54996) = 405 read(3, "\0\t\370 \3\4\0\6$ \0\274\217\4\4\202\217\0\0B\214\5\0@\0200\0\243\217\3\0b"..., 54591) = 419 read(3, "\0\240\0\20\0\205\217\377\17\3460\10\0\343\24\320u\245$\0\0\1\221\1\0\10%\0\0A\240\374"..., 54172) = 408 read(3, "\0\4\231\217\t\370 \0030v\204$\20\0\274\217\304\0\231\217\t\370 \3! \240\2\5\0A\4"..., 53764) = 407 read(3, "\0\370 \3\6\0\6$ \0@\24\20\0\274\217\364\0\231\217\t\370 \3\0\0\0\0!(@\0"..., 53357) = 420 read(3, "\0\245'\20\0\204\217\f\2\231\217\t\370 \3|w\204$\20\0\274\217\320\3\231\217\t\370 \3\0"..., 52937) = 448 read(3, "\0b\20\330\3\202\217\30\3\231\217\310\2\204\217\0\0E\214\f\0\202\217p\260F\214\f\0\202\217t"..., 52489) = 446 read(3, "\0\217|\260C\216\200\260\202\214\v\0b\24<\4\231\217\20\0\204\217L\4\231\217(\0\277\217$\0"..., 52043) = 452 read(3, "\0\217\220\260\20&\240\2600\256\20\0\204\217L\4\231\217!(\0\2\t\370 \3\334x\204$\2\0"..., 51591) = 397 read(3, "\0\0\261\257 \0\260\257\20\0\274\257!\200\200\0!\230\240\0!\210\0\0!\220q\2\334\0\231\217"..., 51194) = 386 read(3, "\0\t\370 \3\250y\204$\20\0\274\217!\210@\0\20\0\203\217\260bb$\3\0D\210\5\0E"..., 50808) = 372 read(3, "\0(\0\260\217\10\0\340\3@\0\275'\1\0\34<\350W\234'!\340\231\3\260\377\275'L\0\277"..., 50436) = 497 read(3, "\0\20\0\274\217\377\377\2$ \0\277\217\34\0\261\217\30\0\260\217\10\0\340\3(\0\275'\1\0\34"..., 49939) = 352 read(3, "\0\0\0\0\0\1\0\34<@S\234'!\340\231\3\340\377\275'\34\0\277\257\30\0\260\257\20\0\274"..., 49587) = 352 read(3, "\0\t\370 \3\370z\204$\337\0 \26\30\0\274\217\240\3\231\217\4\4\204\217\20\0E&\t\370 "..., 49235) = 370 read(3, "\377\0b0\0\22\2\0\10\0\0\20\2\32\3\0\4\0\2$&\0\302\24+\20t\2\2\0#\216"..., 48865) = 393 read(3, "\0\0E\214\370\0\225\217`{\204$\1\0\245$\t\370 \3\0\0E\254\30\0\274\217\0\0\260\216"..., 48472) = 419 read(3, "\0\4\231\217\t\370 \3\254]\245$\30\0\274\217\10\0\204\217\310\0\231\217\t\370 \3\344U\204$"..., 48053) = 416 read(3, "\0\4\2\t\370 \3\34\0\245$\20\0\274\217\271\3\4<\240\254\2044\10\0\205\217<\4\231\217\t"..., 47637) = 426 read(3, "\0\205\254\5\0\0\20\0\0\205\254\20\0\204\217\t\370 \3\304{\204$\20\0\274\217!\20\0\2\34"..., 47211) = 455 read(3, "\0\204\217!\30r\0!0\302\0!(`\0\254ay&\4\0f\254\10\0`\254\t\370 \3\377"..., 46756) = 389 read(3, "\0\0\0\22\6\0%\20E\0\20\0\274\217%\240\202\2\f\f\2044\0\0\224\254!\250\0\0\f\0"..., 46367) = 389 read(3, "\0\0\0\365\254\0\0\n\256\0\0\2\255\1\0\2<\0\0003\255\364\1\4$\0\0\2\255\t\370 "..., 45978) = 384 read(3, "\0\20\0\5$(\2\231\217\t\370 \3\204\6\6$\20\0\274\217! \0\0\21\0\5$(\2\231"..., 45594) = 388 read(3, "\0\217\16\0@\20\f\0\223\217<\0\2$#\20P\0\10\0@\30!(\0\0!0\24\2! "..., 45206) = 385 read(3, "\274\217\f\0\206\217\377\17\3<\377\377c4\300\260\306$\4\0\302\214$(\203\2\10\0\231\217$\20"..., 44821) = 399 read(3, "\0\0\202\217\300\266C\214\1\0\2$\266\0b\24\240\266\2\216\360\377\0\20\260\266\343\216\20\2\231\217"..., 44422) = 403 read(3, "\0\3124\0\21\2\0!\20\202\0\f\0@\254\240\266\342\214\0\t\3064\0\21\2\0!\20\202\0\4"..., 44019) = 455 read(3, "\0\t\370 \3! \0\0\20\0\274\217 \0\242\257\21\260\2<\304\0C4\0\0b\214B\20\2"..., 43564) = 426 read(3, "\0\0\263\257(\0\262\257$\0\261\257 \0\260\257\20\0\274\257!\230\200\0!\200\240\0!\220\300\0"..., 43138) = 408 read(3, "\0B4$\30b\0\30\0\243\257\0\0\203\254\f\0\204\217t\3\231\217\\\200\204$\t\370 \3\0"..., 42730) = 456 read(3, "\0\246'\10\0@\24\20\0\274\217\f\0\204\217L\4\231\217\t\370 \3 \201\204$\20\0\274\217X"..., 42274) = 407 read(3, "\0\217$@\3\1!\210\240\0!\240\200\0!\250\300\0!\220\340\0\0\0H\254\24\0\240\30!\200"..., 41867) = 399 read(3, "\0\20<`\0\0046\0\0\202\214\375\377\3$4\0\0216$\20C\0\0\0\202\254\0\0\"\216\20"..., 41468) = 384 read(3, "\0\217!0@\0!\30\0\0\f\0\204\217\20\0\205\217L\4\231\217\260\203\204$\5\0@\20\360b"..., 41084) = 406 read(3, "\0\2\350\377\340\24\260\242\"%\f\0\204\217L\4\231\217\t\370 \3\f\204\204$ \0\274\217!\20"..., 40678) = 408 read(3, "\0$\"\0\244'\1\0\5$!0\0\0!8\0\0!\310\300\2\t\370 \3\"\0\242\243\20\0"..., 40270) = 402 read(3, "\0!\210\240\0!\230\300\0TcE$\214\204\204$!0 \2\t\370 \3!8`\2!\260\0"..., 39868) = 453 read(3, "\0\20!\2102\2\f\0\204\217L\4\231\217\t\370 \3L\200\204$\20\0\274\217\264\2\202\217\0\0"..., 39415) = 420 read(3, "\0\300\26*\20\261\2G\0@\20\30\0\246\217l\3\231\217\t\370 \3! \2!\220@\0\342"..., 38995) = 452 read(3, "\0$\0\261\217 \0\260\217\10\0\340\3H\0\275'\1\0\34<\314\27\234'!\340\231\3\330\377\275"..., 38543) = 412 read(3, "\0\5<!(%\2c\0\0\20\5\0\4<! \340\0\314\205B$\0\0\203\220\0\0A\220\1"..., 38131) = 402 read(3, "\0\370 \3\334\233\204$\0\0\"\216\20\0\274\217\377\377B$*\30\2\2\367\377`\24\0\0\"\256"..., 37729) = 353 read(3, "\0\0\0\20\24\0\203\217\f\0\204\217t\3\231\217\0\0 \242\t\370 \3,\206\204$\30\0\274\217"..., 37376) = 385 read(3, "\0\377 \24\1\0\204$t\3\231\217\t\370 \3x\4\204\217\30\0\274\217\204\0\231\217\t\370 \3"..., 36991) = 385 read(3, "\0\261\0\0\20\0\0@\254\204\0\231\217!\230\200\0\t\370 \3\30\1\261'!\240@\0\20\0\274"..., 36606) = 352 read(3, "\0\0C\220\r\0@\22\1\0B$\0\0#\242\0\0C\220\377\377R&\1\0001&\371\377`\24"..., 36254) = 384 read(3, "$\20\0\0\20\20\0\274\217\f\0\31\216\214\3\245\217!0 \2!8@\2\t\370 \3! \0"..., 35870) = 394 read(3, "\0\0\20X\37@\240\0\0\0\0\0\0\0\0\0\0\0\0\1\0\34<`\7\234'!\340\231\3\330"..., 35476) = 384 read(3, "\0\257(\0\242\2178\0\246\2174\0\247\217\30\0\242\257\t\370 \3\264\210\204$ \0\274\217\f\0"..., 35092) = 392 read(3, "\0\217\3\0\2$\n\0b\20\0\0\0\0\v\0\0\20\f\0\202\217\f\0\202\217\t\0\0\20\224\212"..., 34700) = 415 read(3, "\0\0!\210\300\0!\240\240\0!\220\340\0\n\0\20$\4\0b\24\3\0\304\220\340\0\2020\5\0"..., 34285) = 471 read(3, "\0\0\t\370 \3\20\0\6$ \0\274\217!\210@\0\f\0\204\217L\4\231\217!( \2\t\370"..., 33814) = 384 read(3, "\0\310\377\0\20D\214\204$\f\0\204\217t\3\231\217\t\370 \3d\214\204$ \0\274\217\35\0e"..., 33430) = 407 read(3, "\0t\3\231\217\"\0\0\20\24\215\204$\f\0\204\217L\4\231\217!(\0\2\t\370 \3\370\214\204"..., 33023) = 397 read(3, "\0|\0\277\217x\0\276\217t\0\267\217p\0\266\217l\0\265\217h\0\264\217d\0\263\217`\0\262"..., 32626) = 403 read(3, "\0\0c\220! \0\2\34\0\277\217\5\0\3\242\30\0\260\217\10\0 \3 \0\275'\1\0\34<"..., 32223) = 348 read(3, "\0\202\217#\0\36$\23\0c&\30\0\244\257\0\0\340\254\0\0\300\242\0\0^\240\3\0\243\24\3"..., 31875) = 397 read(3, "\0\0\2$\1\0\5\242\2\0\3\242\3\0\2\242a \204$\t\370 \3\0\0 \242\20\0\274\217"..., 31478) = 387 read(3, "\0\370 \3\0\0\0\0!\30@\0\1\0\2$\6\0b\20\20\0\274\217\3\0\2$\367\377b\24"..., 31091) = 410 read(3, "\0\0\0\0.\2\0\3.\5\0\r\0\2$\10\0\242\20\20\0\274\217@\3\231\217\t\370 \3\0"..., 30681) = 409 read(3, "\0\20\0\274\217!\230\0\0\20\0\204\217\334\3\231\217\t\370 \0030m\204$! @\0\10\0@"..., 30272) = 399 read(3, "\0 \3\30\0\245'\20\0\274\217\30\0\245'\20\0\204\217\f\2\231\217\t\370 \3pv\204$\20"..., 29873) = 293 read(3, "\0`\24!\20`\2h\1\203\217\0\0B\2164\0\240\257\0\0c\214\21\0`\0200\0\242\257\20"..., 29580) = 293 read(3, "\0\0\261\257\30\0\260\257\20\0\274\257\1\0\2$!\360\300\0!\270\0\0#\0\302\20!\230\0\0"..., 29287) = 390 read(3, "\0L\0\277\257H\0\276\257D\0\267\257@\0\266\257<\0\265\2578\0\264\2574\0\263\2570\0\262"..., 28897) = 350 read(3, "\0\0\3\0`\24\f\0\202\217\16\0\0\20\1\0\22$! \0\2\204\222B$\0\0\203\220\0\0"..., 28547) = 415 read(3, "\0\0\7\0\200\24\3\0\342*0\2\231\217\10\0\305\216\t\370 \3! \300\0\20\0\274\217\3\0"..., 28132) = 400 read(3, "\0&! \0\2 \0\245'\n\0\6$\0\212\21\0\4\0\0\22!\20\0\0\t\370 \3\0\0"..., 27732) = 384 read(3, "\0\0Y\216\t\370 \3! \0\2\20\0\274\217\371\377@\24\0\20\3*\20\0\231\217!( \2"..., 27348) = 465 read(3, "\0<\220\330\234'!\340\231\3\310\377\275',\0\276\257!\360\240\0030\0\277\257(\0\264\257$\0"..., 26883) = 384 read(3, "\0\2!\350\300\0030\0\277\217,\0\276\217(\0\264\217$\0\263\217 \0\262\217\34\0\261\217\30\0"..., 26499) = 448 read(3, "\0\214\10\0 \3\0\0\0\0\10\0\340\3\0\0\0\0\1\0\34<\314\323\234'!\340\231\3\300\376"..., 26051) = 354 read(3, "\0\20\0\274\217\v\0@\20\244\3\231\217\t\370 \3\0\0\0\0\3\0\3$\20\0\274\217\5\0C"..., 25697) = 468 read(3, "\0\277\217(\0\264\217$\0\263\217 \0\262\217\34\0\261\217\30\0\260\217\377\377\2$\10\0\340\0030"..., 25229) = 293 read(3, "\0\10\0\340\0030\0\275'\1\0\34<\220\315\234'!\340\231\3\340\377\275'\30\0\277\257\20\0\274"..., 24936) = 472 read(3, "\0\216\20\0\274\217# \21\0!\30p\0\270\1\231\217\"\0C\24!8\0\0\t\370 \3\0\0"..., 24464) = 384 read(3, "\22\0\0\0208\0D$\20\0@\24[\0d$U\0b,\4\0@\20U\1b,\2\23\10\0"..., 24080) = 396 read(3, "\25\0b,\202\21\f\0\25\0\0\0208\0K$\23\0@\24[\0k$U\0b,\4\0@\20"..., 23684) = 401 read(3, "\0e$U\0b,\4\0@\20U\1b,\2\23\10\0\n\0\0\20n\0E$\4\0@\20U"..., 23283) = 398 read(3, "\0\20\377\377)%\10\0\202\214\373\377D\20\3\0\"1\4\0\243\215@(\5\0+\20e\0\17\0"..., 22885) = 386 read(3, "\310 \303\216\f\0\205\217#\20\220\0!\20Q\0!\30q\0\204\244\244$\1\0B4\310 \303\256"..., 22499) = 400 read(3, "\0\204\244B$\10\0G\214!\30\354\0\4\0\344\254\10\0C\254\4\0e\254\10\0\353$D\0\277"..., 22099) = 422 read(3, "\0$\0\303,\20\0$&\20\0b\256\f\0\"\216\30\0g&\7\0`\24\24\0b\256\20\0\""..., 21677) = 427 read(3, "\0\0D&\7\0`\24\f\0B\256\20\0\"\216\30\0%&\30\0D&\20\0B\256\24\0\"\216"..., 21250) = 401 read(3, "\0\0@\24\10\0B&\1\0b4! S\2\4\0\202\254\4\0B\2164\0\231\217\10\0\204$"..., 20849) = 298 read(3, "\0\0\263\217 \0\262\217\34\0\261\217\30\0\260\217\10\0\340\0030\0\275'\1\0\34<h\270\234'"..., 20551) = 434 read(3, "\231\217\f\0\204\217\240\0\203\217<\3\202\217!0 \3h\225\204$\370\3\231\217\32\0\240\24\0\0"..., 20117) = 399 read(3, "\370 \3!\220\200\0\20\0\274\217\10\0\4$l\3\231\217\t\370 \3!\210@\0\20\0\274\217!"..., 19718) = 402 read(3, "$$\0\277\217 \0\262\217\34\0\261\217\30\0\260\217!\20`\0\10\0\340\3(\0\275'\1\0\34"..., 19316) = 199 read(3, "\0\277\257,\0\265\257(\0\264\257$\0\263\257 \0\262\257\34\0\261\257\30\0\260\257\20\0\274\257\0"..., 19117) = 407 read(3, "\234'!\340\231\3\377\377\2$\3\0\302\24\0\0\0\0\5\0\0\20\1\0\6$\3\0\300\24\0\0"..., 18710) = 401 read(3, "\217\210\2\202\217!(\0\0\30\0B\257\34\0@\257\34\0\277\217\30\0\260\217!\20\240\0\10\0\340"..., 18309) = 399 read(3, "\0\202\217 \4\231\217\0\20\6$\0\0D\214\f\0\202\217\10\0 \3\340\236E\214\0\0\0\0\0"..., 17910) = 398 read(3, "\0\20\4\0\326&\f\0\204\217\2\0\2$L\4\231\217\6\0B\26\244\227\204$\0\0%\226\0\0"..., 17512) = 262 read(3, <===STUCK HERE!! ------------ The Nano is a V3 with Atmega328 and a FT232RL chip. Any suggestions ? Pictor

2 1

Report: LENOVO Base Board Product Name 29CN38WW(V2.15) read
by dpcimanager＠users.sourceforge.net 12 Oct '13

12 Oct '13

flashrom v0.9.7-r1711 on Darwin 11.4.2 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Applications/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/ds/31rzyy2n37sbyr3b7cw9q0xr0000gn/T/DPCItnzAXW.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 94M loops per second, delay more than 10% too short (got 61% of expected delay), recalculating... 92M loops per second, delay more than 10% too short (got 70% of expected delay), recalculating... 106M loops per second, delay more than 10% too short (got 73% of expected delay), recalculating... 103M loops per second, delay more than 10% too short (got 67% of expected delay), recalculating... 86M loops per second, delay loop is unreliable, trying to continue 10 myus = 6 us, 100 myus = 56 us, 1000 myus = 28735 us, 10000 myus = 13790 us, 4 myus = 3 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "LENOVO" DMI string system-product-name: "20041 " DMI string system-version: "Lenovo G460 " DMI string baseboard-manufacturer: "LENOVO" DMI string baseboard-product-name: "Base Board Product Name" DMI string baseboard-version: "Base Board Version" DMI string chassis-type: "Notebook" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Report: PEGATRON 2A94h 5.11 write
by dpcimanager＠users.sourceforge.net 12 Oct '13

12 Oct '13

flashrom v0.9.7-r1711 on Darwin 13.0.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): ~/Desktop/DPCIManager_Lion/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/kc/f812xf592p5016v8xx_9jdk40000gn/T/DPCI3fqlGU.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 387M loops per second, 10 myus = 9 us, 100 myus = 93 us, 1000 myus = 1082 us, 10000 myus = 9862 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x0000000000000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x0000000000000400. No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Pro 3010 Microtower PC" DMI string system-version: " " DMI string baseboard-manufacturer: "PEGATRON CORPORATION" DMI string baseboard-product-name: "2A94h" DMI string baseboard-version: "1.02" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10" with PCI ID 8086:3a18. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0x460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=0, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0xd8, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x90, read w/ addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x9f, read w/o addr, none op[7]: 0xc7, write w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x50 0x08: 0x00000000 (FADDR) 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x00 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0x004200 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512, 64 kB: program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190 on-the-fly OPCODE (0x15) re-programmed, op-pos=2 probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512(A), 64 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res3: id1 0x1313, id2 0x13 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1313, id2 0x13 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Chip status register is 0x00. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 Signature = 0xffffffff (should be 0x50444653) No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xf9, id2 0xcc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25X80" (1024 kB, SPI). Block protection is disabled. Error: Image size (64512 B) doesn't match the flash chip's size (1048576 B)! Restoring MMIO space at 0x108e488a0 Restoring MMIO space at 0x108e4889c Restoring MMIO space at 0x108e48898 Restoring MMIO space at 0x108e48896 Restoring MMIO space at 0x108e48894 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

← Newer
1
...
5
6
7
8
9
10
11
12
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom October 2013