flashrom June 2012

flashrom@flashrom.org

35 participants
108 discussions

Re: [flashrom] [PATCH 2/2] Add board enable for Biostar M7VIQ.
by Luc Verhaegen 10 Aug '12

10 Aug '12

On Sat, Apr 28, 2012 at 01:30:53AM +0200, Stefan Tauner wrote: > The PCI IDs are generic VIA IDs. Only Biostar IDs are those of the LOM, but > that would not be a good choice for ID. Accept the generic IDs (+ DMI string) > for now because this will be generic soonish(tm) anyway. > + {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3116, 0x1106, 0x3116, "^KM266-8235$", NULL, NULL, P3, "Biostar", "M7VIQ", 0, OK, w83697xx_memw_enable_2e}, "KM266-8235" is "VIA Northbridge marketing name"-"VIA Southbridge marketing name with VT removed". This DMI string is not unique at all. Luc Verhaegen.

2 5

[PATCH] Makefile OS-dependent fixes
by Carl-Daniel Hailfinger 10 Aug '12

10 Aug '12

Move Mac OS X IOKit/DirectHW availability checks from compiler check to pciutils check. Add DOS libpci includes only if a PCI-based programmer was requested. Cosmetic fixes (additional newlines) for consistency. This should fix "Checking for a C compiler...not found" if DirectHW was not installed on Mac OS X. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-makefile_pci_osx_dos_fixes/Makefile =================================================================== --- flashrom-makefile_pci_osx_dos_fixes/Makefile (Revision 1547) +++ flashrom-makefile_pci_osx_dos_fixes/Makefile (Arbeitskopie) @@ -55,20 +55,22 @@ ifeq ($(TARGET_OS), Darwin) CPPFLAGS += -I/opt/local/include -I/usr/local/include -# DirectHW framework can be found in the DirectHW library. -LDFLAGS += -framework IOKit -framework DirectHW -L/opt/local/lib -L/usr/local/lib +LDFLAGS += -L/opt/local/lib -L/usr/local/lib endif + ifeq ($(TARGET_OS), FreeBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif + ifeq ($(TARGET_OS), OpenBSD) CPPFLAGS += -I/usr/local/include LDFLAGS += -L/usr/local/lib endif + ifeq ($(TARGET_OS), DOS) EXEC_SUFFIX := .exe -CPPFLAGS += -I../libgetopt -I../libpci/include +CPPFLAGS += -I../libgetopt # DJGPP has odd uint*_t definitions which cause lots of format string warnings. CPPFLAGS += -Wno-format # FIXME Check if we can achieve the same effect with -L../libgetopt -lgetopt @@ -531,10 +533,19 @@ ifeq ($(TARGET_OS), OpenBSD) # For (i386|amd64)_iopl(2). LIBS += -l$(shell uname -m) +else +ifeq ($(TARGET_OS), Darwin) +# DirectHW framework can be found in the DirectHW library. +LIBS += -framework IOKit -framework DirectHW +else +ifeq ($(TARGET_OS), DOS) +CPPFLAGS += -I../libpci/include endif endif endif endif +endif +endif ifeq ($(CONFIG_PRINT_WIKI), yes) FEATURE_CFLAGS += -D'CONFIG_PRINT_WIKI=1' -- http://www.hailfinger.org/

2 7

[PATCH 1/1] Simplify processor_enable.c
by Peter Lemenkov 09 Aug '12

09 Aug '12

Hello All. This patch simplifies processor_flash_enable function a bit by simplifying the structure of the processor_enable.c. At least this patch removes more lines than introdces w/o sacrificing the simplicity. Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> --- processor_enable.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) diff --git a/processor_enable.c b/processor_enable.c index d680f97..d7f421d 100644 --- a/processor_enable.c +++ b/processor_enable.c @@ -24,19 +24,6 @@ #include "flash.h" #include "programmer.h" -#if defined(__i386__) || defined(__x86_64__) - -int processor_flash_enable(void) -{ - /* On x86, flash access is not processor specific except on - * AMD Elan SC520, AMD Geode and maybe other SoC-style CPUs. - * FIXME: Move enable_flash_cs5536 and get_flashbase_sc520 here. - */ - return 0; -} - -#else - #if defined (__MIPSEL__) && defined (__linux) #include <stdio.h> #include <string.h> @@ -83,15 +70,20 @@ static int is_loongson(void) int processor_flash_enable(void) { + int ret = 1; /* FIXME: detect loongson on FreeBSD and OpenBSD as well. */ #if defined (__MIPSEL__) && defined (__linux) if (is_loongson()) { flashbase = 0x1fc00000; - return 0; + ret = 0; } +#elif defined(__i386__) || defined(__x86_64__) + /* On x86, flash access is not processor specific except on + * AMD Elan SC520, AMD Geode and maybe other SoC-style CPUs. + * FIXME: Move enable_flash_cs5536 and get_flashbase_sc520 here. + */ + ret = 0; #endif /* Not implemented yet. Oh well. */ - return 1; + return ret; } - -#endif -- 1.7.9.3

2 1

[PATCH] remove exit calls from sp_docommand
by Niklas Söderlund 30 Jul '12

30 Jul '12

Adapted two callers to handle return codes instead of relying on the exit call. Rest of upstream callers are prepared to handle return values. Signed-off-by: Niklas Söderlund <niso(a)kth.se> --- serprog.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/serprog.c b/serprog.c index f03d332..aac10af 100644 --- a/serprog.c +++ b/serprog.c @@ -246,17 +246,23 @@ static int sp_docommand(uint8_t command, uint32_t parmlen, unsigned char c; if (sp_automatic_cmdcheck(command)) return 1; - if (write(sp_fd, &command, 1) != 1) - sp_die("Error: cannot write op code"); - if (write(sp_fd, params, parmlen) != (parmlen)) - sp_die("Error: cannot write parameters"); - if (read(sp_fd, &c, 1) != 1) - sp_die("Error: cannot read from device"); + if (write(sp_fd, &command, 1) != 1) { + msg_perr("Error: cannot write op code: %s\n", strerror(errno)); + return 1; + } + if (write(sp_fd, params, parmlen) != (parmlen)) { + msg_perr("Error: cannot write parameters: %s\n", strerror(errno)); + return 1; + } + if (read(sp_fd, &c, 1) != 1) { + msg_perr("Error: cannot read from device: %s\n", strerror(errno)); + return 1; + } if (c == S_NAK) return 1; if (c != S_ACK) { - msg_perr("Error: invalid response 0x%02X from device\n",c); - exit(1); + msg_perr("Error: invalid response 0x%02X from device\n", c); + return 1; } if (retlen) { int rd_bytes = 0; @@ -264,8 +270,10 @@ static int sp_docommand(uint8_t command, uint32_t parmlen, int r; r = read(sp_fd, retparms + rd_bytes, retlen - rd_bytes); - if (r <= 0) - sp_die("Error: cannot read return parameters"); + if (r <= 0) { + msg_perr("Error: cannot read return parameters: %s\n", strerror(errno)); + return 1; + } rd_bytes += r; } while (rd_bytes != retlen); } @@ -491,7 +499,8 @@ int serprog_init(void) the programmer to tell us its limits, but if it doesn't, we will assume stuff, so it's in the programmers best interest to tell us. */ - sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL); + if (sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL)) + return 1; if (!sp_docommand(S_CMD_Q_WRNMAXLEN, 0, NULL, 3, rbuf)) { uint32_t v; v = ((unsigned int)(rbuf[0]) << 0); @@ -513,7 +522,8 @@ int serprog_init(void) msg_pdbg(MSGHEADER "Maximum read-n length is %d\n", v); } bt = serprog_buses_supported; - sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL); + if (sp_docommand(S_CMD_S_BUSTYPE, 1, &bt, 0, NULL)) + return 1; } if (serprog_buses_supported & BUS_NONSPI) { -- 1.7.10.3

2 1

[PATCH] remove exit calls from sp_openserport
by Niklas Söderlund 30 Jul '12

30 Jul '12

Instead: - Print same error message as before but use msg_perr instead of perror - Return -1 instead of calling exit(1) All callers of sp_openserport where able to handle this change without much trouble. There already where other error cases that where taken care of, so adding one more will not change behavior of there callers. Signed-off-by: Niklas Söderlund <niso(a)kth.se> --- buspirate_spi.c | 2 ++ pony_spi.c | 3 ++- serial.c | 32 +++++++++++++++++++++++--------- serprog.c | 3 ++- 4 files changed, 29 insertions(+), 11 deletions(-) diff --git a/buspirate_spi.c b/buspirate_spi.c index f816afd..f18538a 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -39,6 +39,8 @@ static int buspirate_serialport_setup(char *dev) { /* 115200bps, 8 databits, no parity, 1 stopbit */ sp_fd = sp_openserport(dev, 115200); + if (sp_fd < 0) + return 1; return 0; } #else diff --git a/pony_spi.c b/pony_spi.c index b5dfc2f..3a413c7 100644 --- a/pony_spi.c +++ b/pony_spi.c @@ -99,7 +99,8 @@ int pony_spi_init(void) if (arg && strlen(arg)) { sp_fd = sp_openserport( arg, 9600 ); - have_device++; + if (sp_fd >= 0) + have_device++; } free(arg); diff --git a/serial.c b/serial.c index 0a56568..32d7e6a 100644 --- a/serial.c +++ b/serial.c @@ -113,8 +113,10 @@ fdtype sp_openserport(char *dev, unsigned int baud) (tolower((unsigned char)dev[1]) == 'o') && (tolower((unsigned char)dev[2]) == 'm')) { dev2 = malloc(strlen(dev) + 5); - if (!dev2) - sp_die("Error: Out of memory"); + if (!dev2) { + msg_perr("Error: Out of memory: %s\n", strerror(errno)); + return -1; + } strcpy(dev2, "\\\\.\\"); strcpy(dev2 + 4, dev); } @@ -123,33 +125,45 @@ fdtype sp_openserport(char *dev, unsigned int baud) if (dev2 != dev) free(dev2); if (fd == INVALID_HANDLE_VALUE) { - sp_die("Error: cannot open serial port"); + msg_perr("Error: cannot open serial port: %s\n", + strerror(errno)); + return -1; } DCB dcb; if (!GetCommState(fd, &dcb)) { - sp_die("Error: Could not fetch serial port configuration"); + msg_perr("Error: Could not fetch serial port configuration: %s\n", + strerror(errno)); + return -1; } + switch (baud) { case 9600: dcb.BaudRate = CBR_9600; break; case 19200: dcb.BaudRate = CBR_19200; break; case 38400: dcb.BaudRate = CBR_38400; break; case 57600: dcb.BaudRate = CBR_57600; break; case 115200: dcb.BaudRate = CBR_115200; break; - default: sp_die("Error: Could not set baud rate"); + default: msg_perr("Error: Could not set baud rate: %s\n", + strerror(errno)); + return -1; } dcb.ByteSize = 8; dcb.Parity = NOPARITY; dcb.StopBits = ONESTOPBIT; if (!SetCommState(fd, &dcb)) { - sp_die("Error: Could not change serial port configuration"); + msg_perr("Error: Could not change serial port configuration: %s\n", + strerror(errno)); + return -1; } return fd; #else struct termios options; int fd, i; fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY); - if (fd < 0) - sp_die("Error: cannot open serial port"); + if (fd < 0) { + msg_perr("Error: cannot open serial port: %s\n", + strerror(errno)); + return -1; + } fcntl(fd, F_SETFL, 0); tcgetattr(fd, &options); for (i = 0;; i++) { @@ -157,7 +171,7 @@ fdtype sp_openserport(char *dev, unsigned int baud) close(fd); msg_perr("Error: cannot configure for baudrate %d\n", baud); - exit(1); + return -1; } if (sp_baudtable[i].baud == baud) { cfsetispeed(&options, sp_baudtable[i].flag); diff --git a/serprog.c b/serprog.c index 65539a1..baa1eab 100644 --- a/serprog.c +++ b/serprog.c @@ -361,7 +361,8 @@ int serprog_init(void) } if (strlen(device)) { sp_fd = sp_openserport(device, atoi(baudport)); - have_device++; + if (sp_fd >= 0) + have_device++; } } if (device && !strlen(device)) { -- 1.7.10.2

2 2

[PATCH] remove exit calls from sp_opensocket
by Niklas Söderlund 30 Jul '12

30 Jul '12

Replace with return statements and adopt the only upstream caller which in turn all plumbing is place for Signed-off-by: Niklas Söderlund <niso(a)kth.se> --- serprog.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/serprog.c b/serprog.c index d06fb0b..02996ea 100644 --- a/serprog.c +++ b/serprog.c @@ -110,20 +110,25 @@ static int sp_opensocket(char *ip, unsigned int port) int sock; msg_pdbg(MSGHEADER "IP %s port %d\n", ip, port); sock = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP); - if (sock < 0) - sp_die("Error: serprog cannot open socket"); + if (sock < 0) { + msg_perr("Error: serprog cannot open socket: %s\n", strerror(errno)); + return -1; + } hostPtr = gethostbyname(ip); if (NULL == hostPtr) { hostPtr = gethostbyaddr(ip, strlen(ip), AF_INET); - if (NULL == hostPtr) - sp_die("Error: cannot resolve"); + if (NULL == hostPtr) { + msg_perr("Error: cannot resolve: %s\n", strerror(errno)); + return -1; + } } sp.si.sin_family = AF_INET; sp.si.sin_port = htons(port); (void)memcpy(&sp.si.sin_addr, hostPtr->h_addr, hostPtr->h_length); if (connect(sock, &sp.s, sizeof(sp.si)) < 0) { close(sock); - sp_die("Error: serprog cannot connect"); + msg_perr("Error: serprog cannot connect: %s\n", strerror(errno)); + return -1; } /* We are latency limited, and sometimes do write-write-read * * (write-n) - so enable TCP_NODELAY. */ @@ -398,6 +403,10 @@ int serprog_init(void) } if (strlen(device)) { sp_fd = sp_opensocket(device, atoi(baudport)); + if (sp_fd < 0) { + free(device); + return 1; + } have_device++; } } -- 1.7.10.3

2 1

Creating a nonprofit
by Carl-Daniel Hailfinger 30 Jul '12

30 Jul '12

Hi, the flashrom project gets donation offers roughly twice a month, and quite a few times people wanted to donate more than 50 EUR / 60 USD. We can't accept those donations right now because there is no legal entity behind the flashrom project. At the same time, we could use some money to improve flasher support by buying some flash chips and programmers so all developers can easily test changes. Besides that, posters/handouts for LinuxTag/FOSDEM/... booths are currently paid for by those flashrom guys who go to those exhibitions. My proposal is to create a nonprofit club in Germany (eingetragener Verein) in the same way as KDE and OpenEmbedded did it. Given that the majority of the flashrom team lives somewhere in the EU, starting or joining a nonprofit in the USA wouldn't make sense. An informal request for comments among those who are involved in flashrom did yield some noticeable interest, and I guess now is the time to make this plan public. coreboot is not an immediate target of this nonprofit club because I don't want to interfere with any plans which may be ongoing on the coreboot side. Nonwithstanding the above, if the coreboot project leaders decide that participating in a nonprofit in Germany would make sense, there's no reason not to do this together. Then again, the majority of coreboot developers live in the USA and a nonprofit outside the USA might not make sense for them. Side note: We (coreboot/flashrom) won a substantial amount of money (to be redeemed in hardware) in a "project beauty contest" held by Thomas-Krenn.com, a nice server manufacturer. We need a legal entity to accept that hardware. Comments? Regards, Carl-Daniel

2 1

Re: [flashrom] [PATCH 1/7] Introduce and use enum test_state
by Carl-Daniel Hailfinger 28 Jul '12

28 Jul '12

Am 03.03.2012 21:11 schrieb Stefan Tauner: > Previously boards in the wiki were tagged either as working or as known > bad. But we added support to various boards via board enables that were > then never tested because the owners have not reported back. This can > now be tagged with NT and is shown appropriately. > > Also, the underlying data structure indicating state was converted from > macros to an enum while preserving original integer values. > > Because all lines specifying supported boards and laptops were touched > anyway, this patch also re-indents them. > > --- > TODO: change other occurrences to use it. wanted to get feedack first. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > > diff --git a/print_wiki.c b/print_wiki.c > index 377154d..9a9cd83 100644 > --- a/print_wiki.c > +++ b/print_wiki.c > @@ -136,9 +136,9 @@ static void wiki_helper(const char *devicetype, int cols, > const struct board_match *b = board_matches; > > for (i = 0; boards[i].vendor != NULL; i++) { > - if (boards[i].working) > + if (boards[i].working == OK) > boardcount_good++; > - else > + if (boards[i].working == BAD) > boardcount_bad++; You could replace that construct with a switch(), and it might make sense to count untested boards as well. > } > > @@ -171,7 +171,8 @@ static void wiki_helper(const char *devicetype, int cols, > b[k].lb_vendor ? b[k].lb_vendor : "", > b[k].lb_vendor ? ":" : "", > b[k].lb_vendor ? b[k].lb_part : "", > - (boards[i].working) ? "OK" : "No"); > + (boards[i].working == OK) ? "OK" : > + (boards[i].working == NT) ? "?3" : "No"); The ?3 looks odd, but I assume you tested it. > > if (boards[i].note) { > printf("<sup>%d</sup>\n", num_notes + 1); > diff --git a/print.c b/print.c > index 1fdeac7..544a846 100644 > --- a/print.c > +++ b/print.c > @@ -545,428 +545,427 @@ void print_supported(void) > [...] > - B("ZOTAC", "Fusion-ITX WiFi (FUSION350-A-E)", 1, NULL, NULL), > - B("ZOTAC", "GeForce 8200", 1, "http://pden.zotac.com/index.php?page=shop.product_details&product_id=129&ca…", NULL), > - B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", 0, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), > - B("ZOTAC", "ZBOX HD-ID11", 1, "http://pdde.zotac.com/index.php?page=shop.product_details&product_id=240&ca…", NULL), > + B("A-Trend", "ATC-6220", OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL), > + B("abit", "A-S78H", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA…", NULL), > + B("abit", "AN-M2", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), > + B("abit", "AV8", OK, "http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?DEFTITLE=…", NULL), Is it possible that this patch made the board table one or two tabs wider? The patch looks like that, and while I agree that some files/sections should not have line length limits, adding another 16 columns of whitespace is something I'd like to avoid. print_wiki related code is something I rarely touch (except for programmer additions), so please don't expect in-depth reviews from me. A cursory review suggests that the patch at least doesn't make the code worse and I don't have any strong feelings about this code. If you feel this patch is beneficial, I can send a weak Acked-by, more like Meh-by. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 3

Log for Gigabyte GA-H61M-D2H-USB3
by user 27 Jul '12

27 Jul '12

Log for Gigabyte GA-H61M-D2H-USB3 motherboard on a Intel H61 chipset for read and write operations.

2 1

P5B-VM DO support
by Justin Bogner 27 Jul '12

27 Jul '12

Hello, I tried out flashrom on one of my machines and it asked me to send a verbose log here, since my mainboard isn't listed on the supported hardware page. The non-verbose log errors with "FREG4: WARNING: Platform Data region is locked" and the chipset is Intel ICH8DO. The mainboard is this one: http://www.asus.com/Motherboards/Intel_Socket_775/P5BVM_DO flashrom v0.9.5.2-r1517 on Linux 3.2.0-24-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1787M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1040 us, 10000 myus = 9987 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5B-VM DO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH8DO" with PCI ID 8086:2814. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0x10464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000f0f (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0f, BRRA 0x0f 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x01ff0100 FREG1: BIOS region (0x00100000-0x001fffff) is read-write. 0x5C: 0x00fd0001 FREG2: Management Engine region (0x00001000-0x000fdfff) is read-write. 0x60: 0x00ff00fe FREG3: Gigabit Ethernet region (0x000fe000-0x000fffff) is read-write. 0x64: 0x00000000 FREG4: WARNING: Platform Data region (0x00000000-0x00000fff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x004140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xC1: 0xffffffff (VSCC) VSCC: BES=0x3, WG=1, WSR=1, WEWS=1, EO=0xff, VCL=1 SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25LF040A, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : none Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address 0xffe00000. Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x93, id2 0x75, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found SST flash chip "SST25VF016B" (2048 kB, SPI). No operations were specified. Restoring MMIO space at 0x7f24359380bc Restoring MMIO space at 0x7f24359380b8 Restoring MMIO space at 0x7f24359380b6 Restoring MMIO space at 0x7f24359380b4 Restoring PCI config space for 00:1f:0 reg 0xdc

2 2

← Newer
1
2
3
4
5
6
7
8
...
11
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom June 2012