flashrom April 2011

flashrom@flashrom.org

61 participants
201 discussions

[patch] Include "flash.h" and <inttypes.h> in chipdrivers.h
by David Hendricks 16 Aug '11

16 Aug '11

This patch is intended to avoid compilation issues caused by the ordering of #includes in source files that use chipdrivers.h. Signed-off-by: David Hendricks <dhendrix(a)google.com> -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

2 3

[PATCH] internal dmi decoder
by Sean Nelson 16 Aug '11

16 Aug '11

Here is a new version of the internal dmi decoding. To use the new decoder, the user needs to use "-p internal:dmi=new", to cross-check with the external dmidecode use "-p internal:dmi=check". Hopefully if this is comitted, it will make it easier for people to test the new internal decoder. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

5 8

[PATCH] Always read chip before writing, avoid emergency messages
by Carl-Daniel Hailfinger 15 Aug '11

15 Aug '11

Always read the flash chip before writing. This will allow flashrom to skip erase of already-erased blocks and to skip write of blocks which already have the wanted contents. Avoid emergency messages by checking if the chip contents after a failed write operation (erase/write) are unchanged. Keep the emergency messages after a failed pure erase. That part is debatable because if someone wants erase, he pretty sure doesn't care about the flash contents anymore. Please note that this introduces additional overhead of a full chip read before write. This is frowned upon by people with slow programmers. Maybe we should make this configurable. Either way, this patch needs a review to make sure I'm not going in the wrong direction. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-always_read_no_scary_warning/flash.h =================================================================== --- flashrom-always_read_no_scary_warning/flash.h (Revision 1212) +++ flashrom-always_read_no_scary_warning/flash.h (Arbeitskopie) @@ -239,7 +239,7 @@ /* layout.c */ int read_romlayout(char *name); int find_romentry(char *name); -int handle_romentries(uint8_t *buffer, struct flashchip *flash); +int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents); /* spi.c */ struct spi_command { Index: flashrom-always_read_no_scary_warning/layout.c =================================================================== --- flashrom-always_read_no_scary_warning/layout.c (Revision 1212) +++ flashrom-always_read_no_scary_warning/layout.c (Arbeitskopie) @@ -205,7 +205,7 @@ return -1; } -int handle_romentries(uint8_t *buffer, struct flashchip *flash) +int handle_romentries(struct flashchip *flash, uint8_t *oldcontents, uint8_t *newcontents) { int i; @@ -225,13 +225,12 @@ // normal will be updated and the rest will be kept. for (i = 0; i < romimages; i++) { - if (rom_entries[i].included) continue; - flash->read(flash, buffer + rom_entries[i].start, - rom_entries[i].start, - rom_entries[i].end - rom_entries[i].start + 1); + memcpy(newcontents + rom_entries[i].start, + oldcontents + rom_entries[i].start, + rom_entries[i].end - rom_entries[i].start + 1); } return 0; Index: flashrom-always_read_no_scary_warning/flashrom.c =================================================================== --- flashrom-always_read_no_scary_warning/flashrom.c (Revision 1212) +++ flashrom-always_read_no_scary_warning/flashrom.c (Arbeitskopie) @@ -1343,6 +1343,19 @@ return ret; } +void nonfatal_help_message(void) +{ + msg_gerr("Writing to the flash chip apparently didn't do anything.\n" + "This means we have to add special support for your board, " + "programmer or flash chip.\n" + "Please report this on IRC at irc.freenode.net (channel " + "#flashrom) or\n" + "mail flashrom(a)flashrom.org!\n" + "-------------------------------------------------------------" + "------------------\n" + "You may now reboot or simply leave the machine running.\n"); +} + void emergency_help_message(void) { msg_gerr("Your flash chip is in an unknown state.\n" @@ -1602,9 +1615,10 @@ */ int doit(struct flashchip *flash, int force, char *filename, int read_it, int write_it, int erase_it, int verify_it) { - uint8_t *buf; + uint8_t *oldcontents; + uint8_t *newcontents; int ret = 0; - unsigned long size; + unsigned long size = flash->total_size * 1024; if (chip_safety_check(flash, force, filename, read_it, write_it, erase_it, verify_it)) { msg_cerr("Aborting.\n"); @@ -1612,9 +1626,6 @@ return 1; } - size = flash->total_size * 1024; - buf = (uint8_t *) calloc(size, sizeof(char)); - /* Given the existence of read locks, we want to unlock for read, * erase and write. */ @@ -1627,6 +1638,12 @@ return ret; } if (erase_it) { + /* FIXME: Do we really want the scary warning if erase failed? + * After all, after erase the chip is either blank or partially + * blank or it has the old contents. A blank chip won't boot, + * so if the user wanted erase and reboots afterwards, the user + * knows very well that booting won't work. + */ if (erase_flash(flash)) { emergency_help_message(); programmer_shutdown(); @@ -1634,33 +1651,71 @@ } } + newcontents = (uint8_t *) calloc(size, sizeof(char)); + if (write_it || verify_it) { - if (read_buf_from_file(buf, flash->total_size * 1024, filename)) { + if (read_buf_from_file(newcontents, size, filename)) { programmer_shutdown(); return 1; } #if CONFIG_INTERNAL == 1 - show_id(buf, size, force); + if (programmer == PROGRAMMER_INTERNAL) + show_id(newcontents, size, force); #endif } + oldcontents = (uint8_t *) calloc(size, sizeof(char)); + + /* Read the whole chip to be able to check whether regions need to be + * erased and to give better diagnostics in case write fails. + * The alternative would be to read only the regions which are to be + * preserved, but in that case we might perform unneeded erase which + * takes time as well. + */ + msg_cdbg("Reading old flash chip contents...\n"); + if (flash->read(flash, oldcontents, 0, size)) { + programmer_shutdown(); + return 1; + } + // This should be moved into each flash part's code to do it // cleanly. This does the job. - handle_romentries(buf, flash); + handle_romentries(flash, oldcontents, newcontents); // //////////////////////////////////////////////////////////// if (write_it) { if (erase_flash(flash)) { + msg_cerr("Uh oh. Erase failed. Checking if anything " + "changed.\n"); + if (!flash->read(flash, newcontents, 0, size)) { + if (!memcmp(oldcontents, newcontents, size)) { + msg_cinfo("Good. It seems nothing was " + "changed.\n"); + nonfatal_help_message(); + programmer_shutdown(); + return 1; + } + } emergency_help_message(); programmer_shutdown(); return 1; } msg_cinfo("Writing flash chip... "); - ret = flash->write(flash, buf, 0, flash->total_size * 1024); + ret = flash->write(flash, newcontents, 0, size); if (ret) { - msg_cerr("FAILED!\n"); + msg_cerr("Uh oh. Write failed. Checking if anything " + "changed.\n"); + if (!flash->read(flash, newcontents, 0, size)) { + if (!memcmp(oldcontents, newcontents, size)) { + msg_cinfo("Good. It seems nothing was " + "changed.\n"); + nonfatal_help_message(); + programmer_shutdown(); + return 1; + } + } emergency_help_message(); programmer_shutdown(); return 1; @@ -1673,7 +1728,7 @@ /* Work around chips which need some time to calm down. */ if (write_it) programmer_delay(1000*1000); - ret = verify_flash(flash, buf); + ret = verify_flash(flash, newcontents); /* If we tried to write, and verification now fails, we * might have an emergency situation. */ -- http://www.hailfinger.org/

4 8

[PATCH] [1/n] SPI FAST READ infrastructure
by Carl-Daniel Hailfinger 14 Aug '11

14 Aug '11

SPI FAST READ infrastructure. Add feature bits to allow annotation of SPI flash chips with possible read methods. This includes the not-yet-supported Dual and Quad I/O read operations just in case we ever encounter programmer hardware which can use that feature. An alternative design would be to create a separate spi_chip_fast_read function and have a per-chip array of allowable read functions similar to what we have for erase functions. A similar design problem exists for chips supporting multiple write functions (e.g. classic SPI write and SPI AAI write). Thorough design review appreciated. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-spi_fast_read/flash.h =================================================================== --- flashrom-spi_fast_read/flash.h (Revision 1249) +++ flashrom-spi_fast_read/flash.h (Arbeitskopie) @@ -92,6 +92,11 @@ #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) +#define FEATURE_SPI_FAST_READ (1 << 8) +#define FEATURE_SPI_FAST_READ_DUAL_O (1 << 9) +#define FEATURE_SPI_FAST_READ_DUAL_IO (1 << 10) +#define FEATURE_SPI_FAST_READ_QUAD_O (1 << 11) +#define FEATURE_SPI_FAST_READ_QUAD_IO (1 << 12) struct flashchip { const char *vendor; Index: flashrom-spi_fast_read/dediprog.c =================================================================== --- flashrom-spi_fast_read/dediprog.c (Revision 1249) +++ flashrom-spi_fast_read/dediprog.c (Arbeitskopie) @@ -220,8 +220,15 @@ /* Round down. */ bulklen = (len - residue) / chunksize * chunksize; - ret = dediprog_spi_bulk_read(flash, buf + residue, start + residue, - bulklen); + if (flash->feature_bits & FEATURE_SPI_FAST_READ) { + ret = dediprog_spi_bulk_read(flash, buf + residue, + start + residue, bulklen); + } else { + msg_pdbg("Using slow read because your flash chip is not " + "listed as supporting fast read (yet).\n"); + ret = spi_read_chunked(flash, buf + residue, start + residue, + bulklen, 16); + } if (ret) return ret; Index: flashrom-spi_fast_read/flashchips.c =================================================================== --- flashrom-spi_fast_read/flashchips.c (Revision 1249) +++ flashrom-spi_fast_read/flashchips.c (Arbeitskopie) @@ -282,6 +282,7 @@ .model_id = AMIC_A25L05PT, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_SPI_FAST_READ | FEATURE_SPI_FAST_READ_DUAL_O | FEATURE_SPI_FAST_READ_DUAL_IO, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -313,6 +314,7 @@ .model_id = AMIC_A25L05PU, .total_size = 64, .page_size = 256, + .feature_bits = FEATURE_SPI_FAST_READ | FEATURE_SPI_FAST_READ_DUAL_O | FEATURE_SPI_FAST_READ_DUAL_IO, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -344,6 +346,7 @@ .model_id = AMIC_A25L10PT, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_SPI_FAST_READ | FEATURE_SPI_FAST_READ_DUAL_O | FEATURE_SPI_FAST_READ_DUAL_IO, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -376,6 +379,7 @@ .model_id = AMIC_A25L10PU, .total_size = 128, .page_size = 256, + .feature_bits = FEATURE_SPI_FAST_READ | FEATURE_SPI_FAST_READ_DUAL_O | FEATURE_SPI_FAST_READ_DUAL_IO, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -408,6 +412,7 @@ .model_id = AMIC_A25L20PT, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_SPI_FAST_READ | FEATURE_SPI_FAST_READ_DUAL_O | FEATURE_SPI_FAST_READ_DUAL_IO, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, @@ -440,6 +445,7 @@ .model_id = AMIC_A25L20PU, .total_size = 256, .page_size = 256, + .feature_bits = FEATURE_SPI_FAST_READ | FEATURE_SPI_FAST_READ_DUAL_O | FEATURE_SPI_FAST_READ_DUAL_IO, .tested = TEST_UNTESTED, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, -- http://www.hailfinger.org/

2 1

[PATCH] Warn about unhandled one-time programmable memory
by Daniel Lenski 14 Aug '11

14 Aug '11

Added feature bit FEATURE_UNHANDLED_OTP, and a warning for chips like AMIC A25L032 and A25LQ032 which contain small regions of one-time programmable memory that flashrom can neither read, nor write, nor erase. Signed-off-by: Daniel Lenski <dlenski(a)gmail.com> --- flash.h | 1 + flashchips.c | 2 ++ flashrom.c | 8 ++++++++ 3 files changed, 11 insertions(+), 0 deletions(-) diff --git a/flash.h b/flash.h index 6f0d7c0..6db4c48 100644 --- a/flash.h +++ b/flash.h @@ -85,6 +85,7 @@ enum chipbustype { #define FEATURE_ADDR_SHIFTED (1 << 5) #define FEATURE_WRSR_EWSR (1 << 6) #define FEATURE_WRSR_WREN (1 << 7) +#define FEATURE_UNHANDLED_OTP (1 << 8) #define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN) struct flashchip { diff --git a/flashchips.c b/flashchips.c index efd7599..07b9635 100644 --- a/flashchips.c +++ b/flashchips.c @@ -817,6 +817,7 @@ struct flashchip flashchips[] = { .model_id = AMIC_A25L032, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_UNHANDLED_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -852,6 +853,7 @@ struct flashchip flashchips[] = { .model_id = AMIC_A25LQ032, .total_size = 4096, .page_size = 256, + .feature_bits = FEATURE_UNHANDLED_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, diff --git a/flashrom.c b/flashrom.c index 2690151..a7471a6 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1434,6 +1434,14 @@ void check_chip_supported(struct flashchip *flash) "Thanks for your help!\n" "===\n"); } + if (flash->feature_bits & FEATURE_UNHANDLED_OTP) { + msg_cinfo("===\n" + "This flash part contains a region of one-time programmable memory\n" + "which flashrom cannot read, and may never be able to write or\n" + "erase. flashrom may not be able to completely backup and rewrite\n" + "the contents of this chip.\n" + "===\n"); + } } int main(int argc, char *argv[]) -- 1.7.0.4

2 1

Problems with flashrom
by Benjamin Z. Gregorian 11 Aug '11

11 Aug '11

Hi Guys I run into trouble using flashrom. first I downloaded the ROM to flash then I downloaded flashrom and run the following command ---------- sudo flashrom ---------- Result: flashrom v0.9.1-r946 No coreboot table found. Found chipset "Intel ICH7/ICH7R", enabling flash write... OK. This chipset supports the following protocols: FWH. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. No operations were specified. --------- I assumed that flashrom can burn my BIOS (since there was no warning given) Then I tried --------- sudo flashrom -wv Desktop/Downloads/P5LD2-2002.ROM --------- Result was that two opperations are not permittet or so After studying the man page I ran the following command --------- sudo flashrom -w Desktop/Downloads/P5LD2-2002.ROM --------- and got panic!!!!!!! -------- flashrom v0.9.1-r946 No coreboot table found. Found chipset "Intel ICH7/ICH7R", enabling flash write... OK. This chipset supports the following protocols: FWH. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash chip... ERASE FAILED at 0x000002c8! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x00000fff: 0xd12 ERASE FAILED! ERASE FAILED at 0x000002c8! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x0000ffff: 0xfc2b ERASE FAILED! FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! ----------------------------------- PLEASE ADVICE what to do next. LOOKING EAGERLY FORWARD to YOUR REPLY Regards Benjamin -- Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail

5 6

[PATCH] add support for AT49F040
by David Borg 11 Aug '11

11 Aug '11

Hi, I was adding support for the AT49F040 parallel flash chip, but have some questions. This chip has a boot block which once locked cannot be erased / rewritten. Should I add erase functions for both cases? Currently the erase function handles unlocked chips only. In addition, the datasheet specifies no command timings, is the timing something I can infer from the read / program cycle characteristics tables? Regards, David Signed-off-by: David Borg <borg.db(a)gmail.com> datasheet: http://pdf1.alldatasheet.com/datasheet-pdf/view/56184/ATMEL/AT49F040.html Index: flashchips.c =================================================================== --- flashchips.c (revision 1145) +++ flashchips.c (working copy) @@ -1985,6 +1985,29 @@ }, { + .vendor = "Atmel", + .name = "AT49F040", + .bustype = CHIP_BUSTYPE_PARALLEL, + .manufacture_id = ATMEL_ID, + .model_id = AT_49F040, + .total_size = 512, + .page_size = 512, + .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_FULL, + .tested = TEST_UNTESTED, + .probe = probe_jedec, + .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ + .block_erasers = + { + { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = erase_chip_block_jedec, + } + }, + .write = write_jedec_1, + .read = read_memmapped, + }, + + { .vendor = "EMST", .name = "F49B002UA", .bustype = CHIP_BUSTYPE_PARALLEL, Index: flashchips.h =================================================================== --- flashchips.h (revision 1145) +++ flashchips.h (working copy) @@ -174,6 +174,7 @@ #define AT_49F020 0x0B #define AT_49F002N 0x07 /* for AT49F002(N) */ #define AT_49F002NT 0x08 /* for AT49F002(N)T */ +#define AT_49F040 0x13 #define CATALYST_ID 0x31 /* Catalyst */

3 2

Re: [flashrom] [PATCH 8/8] Added (N) to the name of MX29F002B/T devices.
by Idwer Vollering 07 Aug '11

07 Aug '11

2011/3/15 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>: > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer(a)gmail.com> But *only* if the probe/read/erase/write status is not affected. > --- > flashchips.c | 4 ++-- > flashchips.h | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/flashchips.c b/flashchips.c > index 7cb7d39..97aafef 100644 > --- a/flashchips.c > +++ b/flashchips.c > @@ -4209,7 +4209,7 @@ struct flashchip flashchips[] = { > > { > .vendor = "Macronix", > - .name = "MX29F002B", > + .name = "MX29F002(N)B", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = MACRONIX_ID, > .model_id = MACRONIX_MX29F002B, > @@ -4240,7 +4240,7 @@ struct flashchip flashchips[] = { > > { > .vendor = "Macronix", > - .name = "MX29F002T", > + .name = "MX29F002(N)T", > .bustype = CHIP_BUSTYPE_PARALLEL, > .manufacture_id = MACRONIX_ID, > .model_id = MACRONIX_MX29F002T, > diff --git a/flashchips.h b/flashchips.h > index 9b08d25..9782188 100644 > --- a/flashchips.h > +++ b/flashchips.h > @@ -361,8 +361,8 @@ > #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ > #define MACRONIX_MX29F001B 0x19 > #define MACRONIX_MX29F001T 0x18 > -#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB */ > -#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT */ > +#define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB; N has reset pin n/c. */ > +#define MACRONIX_MX29F002T 0xB0 /* Same as MX29F002NT; N has reset pin n/c. */ > #define MACRONIX_MX29F004B 0x46 > #define MACRONIX_MX29F004T 0x45 > #define MACRONIX_MX29F022T 0x36 /* Same as MX29F022NT */ > -- > 1.7.1 > > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

2 2

ck804 enable improvement
by Jonathan A. Kollasch 07 Aug '11

07 Aug '11

Hi, Attached is a proposed patch for improving the ck804 chipset enable. Comments? Jonathan Kollasch

3 3

[PATCH] Confirm EN29LV800 bus, timing, and page size
by TJ 02 Aug '11

02 Aug '11

Uncertain values now confirmed. If you're happy with the new EN29LV800 code I'll submit a combined patch with a Signed-off-by tag. --- flashchips.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/flashchips.c b/flashchips.c index b5be180..10b8dea 100644 --- a/flashchips.c +++ b/flashchips.c @@ -2166,15 +2166,15 @@ struct flashchip flashchips[] = { { .vendor = "EON", .name = "EN29LV800(B)(C)B", - .bustype = CHIP_BUSTYPE_UNKNOWN, + .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EN_29LV800B, .total_size = 1024, - .page_size = 1024, // TODO: check this + .page_size = 1024, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* TODO: check Datasheet has no timing info specified */ + .probe_timing = TIMING_ZERO, .erase = NULL, .block_erasers = { @@ -2198,15 +2198,15 @@ struct flashchip flashchips[] = { { .vendor = "EON", .name = "EN29LV800(B)(C)T", - .bustype = CHIP_BUSTYPE_UNKNOWN, + .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = EON_ID, .model_id = EN_29LV800T, .total_size = 1024, - .page_size = 1024, // TODO: check this + .page_size = 1024, .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, .tested = TEST_UNTESTED, .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* TODO: check Datasheet has no timing info specified */ + .probe_timing = TIMING_ZERO, .erase = NULL, .block_erasers = { -- 1.6.3.3

4 5

← Newer
1
2
3
4
5
6
7
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom April 2011