flashrom September 2010

flashrom@flashrom.org

68 participants
216 discussions

Success - ECS NFORCE 570 SLIT-A (PCB:3.1)
by Arve Seljebu 21 Sep '10

21 Sep '10

Success for ECS NFORCE 570 SLIT-A (PCB:3.1) - http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=677&C… Regards Arve Seljebu

1 0

Motherboad supported: Asus P5QL-CM
by Денис Юсупов 21 Sep '10

21 Sep '10

Hello! I have Asus P5QL-CM motherboard, and flashrom works just fine. See logs: server# flashrom -VV -r /mnt/flash/P5QL-CM.oldbios flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5QL-CM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x00414004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1016 us, 10000 myus = 10020 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: RDID returned 0x1c 0x31 0x14 0x1c. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm39LV040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: RDID returned 0x1c 0x31 0x14. Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W25Q80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash chip, zero size at 0x00000000. RDID returned 0x1c 0x31 0x14. probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Not unmapping zero size at 0x0 Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash chip, zero size at 0x00000000. REMS returned 1c 13. probe_spi_rems: id1 0x1c, id2 0x13 Not unmapping zero size at 0x0 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Reading flash... done. server# flashrom -Vw /mnt/flash/2/P5QL-ASUS-0615.ROM flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5QL-CM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1021 us, 10000 myus = 10020 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x97, id2 0x67, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x04, id2 0x01, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list. Invalid OPCODE 0x20 spi_block_erase_20 failed during command execution at address 0x0 Looking at blockwise erase function 1... trying... 0x000000-0x00ffff, 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, 0x0a0000-0x0affff, 0x0b0000-0x0bffff, 0x0c0000-0x0cffff, 0x0d0000-0x0dffff, 0x0e0000-0x0effff, 0x0f0000-0x0fffff, SUCCESS. done. Programming page: COMPLETE. Verifying flash... VERIFIED. flashrom v0.9.2-r1001 on FreeBSD 8.1-RELEASE (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] flashrom is free software, get the source code at http://www.flashrom.org Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5QL-CM" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel ICH10", enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode disabled 0xffe00000/0xffa00000 FWH decode disabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 Root Complex Register Block address = 0xfed1c000 GCS = 0x1465: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x2008 (HSFS) FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00000202 (FRAP) BMWAG 0, BMRAG 0, BRWA 2, BRRA 2 0x54: 0x00001fff (FREG0) 0x58: 0x00001fff (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00001fff (FREG3) 0x64: 0x00001fff (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f1004 (SSFS, SSFC) 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00000000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching disabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 2519M loops per second, 10 myus = 12 us, 100 myus = 107 us, 1000 myus = 1015 us, 10000 myus = 10021 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x4d, id2 0x5a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x24, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13 === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. server# server# pciconf -lbcv hostb0@pci0:0:0:0: class=0x060000 card=0x83361043 chip=0x2e208086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI cap 09[e0] = vendor (length 12) Intel cap 2 version 1 vgapci0@pci0:0:2:0: class=0x030000 card=0x83361043 chip=0x2e228086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display subclass = VGA bar [10] = type Memory, range 64, base 0xfe400000, size 4194304, enabled bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled bar [20] = type I/O Port, range 32, base 0xcc00, size 8, enabled cap 05[90] = MSI supports 1 message cap 01[d0] = powerspec 2 supports D0 D3 current D0 cap 13[a4] = PCI Advanced Features: FLR TP vgapci1@pci0:0:2:1: class=0x038000 card=0x83361043 chip=0x2e238086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = display bar [10] = type Memory, range 64, base 0xfe900000, size 1048576, enabled cap 01[d0] = powerspec 2 supports D0 D3 current D0 uhci0@pci0:0:26:0: class=0x0c0300 card=0x82d41043 chip=0x3a378086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *4' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc480, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci1@pci0:0:26:1: class=0x0c0300 card=0x82d41043 chip=0x3a388086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *5' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc800, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci2@pci0:0:26:2: class=0x0c0300 card=0x82d41043 chip=0x3a398086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *6' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc880, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 ehci0@pci0:0:26:7: class=0x0c0320 card=0x82d41043 chip=0x3a3c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB EHCI Controller *2' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0xfe8fbc00, size 1024, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 09[98] = vendor (length 6) Intel cap 2 version 0 none0@pci0:0:27:0: class=0x040300 card=0x84201043 chip=0x3a3e8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'Microsoft UAA Bus Driver for High Definition Audio (Microsoft UAA Bus Driver for High Definition Audio)' class = multimedia subclass = HDA bar [10] = type Memory, range 64, base 0xfe8f4000, size 16384, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 05[60] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0) pcib1@pci0:0:28:0: class=0x060400 card=0x82d41043 chip=0x3a408086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 1' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 1 root port max data 128(128) link x0(x1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x82d41043 cap 01[a0] = powerspec 2 supports D0 D3 current D0 pcib2@pci0:0:28:5: class=0x060400 card=0x82d41043 chip=0x3a4a8086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 6' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x82d41043 cap 01[a0] = powerspec 2 supports D0 D3 current D0 uhci3@pci0:0:29:0: class=0x0c0300 card=0x82d41043 chip=0x3a348086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *1' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc000, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci4@pci0:0:29:1: class=0x0c0300 card=0x82d41043 chip=0x3a358086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *2' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc080, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 uhci5@pci0:0:29:2: class=0x0c0300 card=0x82d41043 chip=0x3a368086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *3' class = serial bus subclass = USB bar [20] = type I/O Port, range 32, base 0xc400, size 32, enabled cap 09[50] = vendor (length 6) Intel cap 2 version 0 ehci1@pci0:0:29:7: class=0x0c0320 card=0x82d41043 chip=0x3a3a8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB EHCI Controller *1' class = serial bus subclass = USB bar [10] = type Memory, range 32, base 0xfe8fb800, size 1024, enabled cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 09[98] = vendor (length 6) Intel cap 2 version 0 pcib3@pci0:0:30:0: class=0x060401 card=0x82d41043 chip=0x244e8086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI cap 0d[50] = PCI Bridge card=0x82d41043 isab0@pci0:0:31:0: class=0x060100 card=0x82d41043 chip=0x3a188086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'LPC Interface Controller' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: Quick Resume, SATA RAID-5, 4 PCI-e x1 slots, SATA RAID-0/1/10 atapci0@pci0:0:31:2: class=0x010601 card=0x82d41043 chip=0x3a228086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '6 port SATA AHCI Controller' class = mass storage subclass = SATA bar [10] = type I/O Port, range 32, base 0xb880, size 8, enabled bar [14] = type I/O Port, range 32, base 0xb800, size 4, enabled bar [18] = type I/O Port, range 32, base 0xb480, size 8, enabled bar [1c] = type I/O Port, range 32, base 0xb400, size 4, enabled bar [20] = type I/O Port, range 32, base 0xb080, size 32, enabled bar [24] = type Memory, range 32, base 0xfe8fa800, size 2048, enabled cap 05[80] = MSI supports 16 messages cap 01[70] = powerspec 3 supports D0 D3 current D0 cap 12[a8] = SATA Index-Data Pair cap 09[b0] = vendor (length 6) Intel cap 2 version 0 none1@pci0:0:31:3: class=0x0c0500 card=0x82d41043 chip=0x3a308086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'SMB controller (50011458)' class = serial bus subclass = SMBus bar [10] = type Memory, range 64, base 0xfe8fb400, size 256, enabled bar [20] = type I/O Port, range 32, base 0x400, size 32, enabled re0@pci0:1:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0xd800, size 256, enabled bar [18] = type Prefetchable Memory, range 64, base 0xfdeff000, size 4096, enabled bar [20] = type Prefetchable Memory, range 64, base 0xfdee0000, size 65536, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 2 messages, 64 bit enabled with 1 message cap 10[70] = PCI-Express 1 endpoint IRQ 2 max data 128(256) link x1(x1) cap 11[b0] = MSI-X supports 2 messages in map 0x20 cap 03[d0] = VPD em0@pci0:3:0:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' class = network subclass = ethernet bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, enabled bar [14] = type Memory, range 32, base 0xfebc0000, size 131072, enabled bar [18] = type I/O Port, range 32, base 0xec00, size 64, enabled cap 01[dc] = powerspec 2 supports D0 D3 current D0 cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction server# server# superiotool -deV superiotool r Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x4400, id=0x23a0 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0xa023, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627DHG (id=0xa0, rev=0x23) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff a0 23 ff 00 44 00 00 ff 50 00 00 00 92 21 00 ff def 00 a0 NA ff 00 MM 00 MM RR 50 00 00 RR e2 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 03 78 00 04 3c def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 83 def 01 00 60 00 64 01 0c 83 LDN 0x06 (Serial peripheral interface) idx 30 62 63 val 00 ff ff def 00 00 00 LDN 0x07 (GPIO 6) idx 30 f4 f5 f6 f7 val 06 ff ff ff ff def 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED) idx 30 f5 f6 f7 val 00 ff 00 ff def 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 fe val 0f df 01 00 ff 04 00 00 0c 36 21 f3 04 00 09 16 fe 00 00 00 def 00 ff 00 00 ff 00 00 00 00 00 00 ff 00 00 00 ff 00 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f2 f3 f4 f6 f7 fe val 01 00 01 00 47 04 20 02 1c 10 09 00 7d 00 00 00 00 00 def 00 00 01 00 ff 08 00 RR 1c 00 RR RR 7c 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 f2 val 01 02 90 00 81 00 83 def 00 00 00 00 81 00 00 LDN 0x0c (PECI, SST) idx e0 e1 e2 e3 e4 e5 e8 f1 fe ff val 10 64 48 48 48 00 01 48 f0 40 def 00 48 48 48 48 00 00 48 00 00 Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff server# -- WBR, Dennis Yusupoff

1 0

[commit] r1180 - trunk
by repository service 20 Sep '10

20 Sep '10

Author: uwe Date: Mon Sep 20 19:23:38 2010 New Revision: 1180 URL: http://flashrom.org/trac/flashrom/changeset/1180 Log: The variable 'ret' is unused when compiling on BigEndian architecture. This produces an "unused variable" message, which might be treated as error if -Werror was passed to compiler. With this patch I was able to compile flashrom cleanly on ppc and ppc64: http://koji.fedoraproject.org/koji/taskinfo?taskID=2472482 http://koji.fedoraproject.org/koji/taskinfo?taskID=2472484 Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/internal.c Modified: trunk/internal.c ============================================================================== --- trunk/internal.c Sun Sep 19 01:42:36 2010 (r1179) +++ trunk/internal.c Mon Sep 20 19:23:38 2010 (r1180) @@ -118,7 +118,9 @@ int internal_init(void) { +#if __FLASHROM_LITTLE_ENDIAN__ int ret = 0; +#endif int force_laptop = 0; char *arg;

1 0

[PATCH] Suppress error message from GCC while compiling with -Werror
by Peter Lemenkov 20 Sep '10

20 Sep '10

Hello. The variable 'ret' is unused when compiling on BigEndian architecture. This produces "unused variable" message, which might be treated as error if -Werror was passed to compiler. With this patch I was able to compile flashrom cleanly on ppc and ppc64: http://koji.fedoraproject.org/koji/taskinfo?taskID=2472482 http://koji.fedoraproject.org/koji/taskinfo?taskID=2472484 Signed-off-by: Peter Lemenkov <lemenkov(a)gmail.com> --- internal.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/internal.c b/internal.c index 8b19692..497ce6c 100644 --- a/internal.c +++ b/internal.c @@ -118,7 +118,9 @@ int is_laptop = 0; int internal_init(void) { +#if __FLASHROM_LITTLE_ENDIAN__ int ret = 0; +#endif int force_laptop = 0; char *arg; -- 1.7.2.2

2 1

[PATCH] AMD chip IDs fix-up
by Mattias Mattsson 19 Sep '10

19 Sep '10

Hi, This patch: - Changes chip ID constant names to the "canonical" chip name for AMD chips - Adds useful comments where the same ID corresponds to different chips. - Also adds a bunch of new chip IDs. All IDs are verified against the official AMD datasheets. Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

1 0

[PATCH] Add Alliance Semiconductor chip IDs
by Mattias Mattsson 19 Sep '10

19 Sep '10

Add chip IDs for Alliance Semiconductor flash chips. Cross-checked with UniFlash 1.40 source, chip datasheets and EZoFlash's chip database (http://www.ezoflash.com/chip_database.php). Datasheets: http://www.ezoflash.com/datasheets/flash/Alliance/AS29F002.pdf http://www.alsc.com/pdf/flash.pdf/as29f010.pdf http://www.alsc.com/pdf/flash.pdf/as29f040.pdf http://www.alsc.com/pdf/flash.pdf/as29f200.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV160.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV400.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV800.pdf Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com>

2 2

[commit] r1179 - trunk
by repository service 19 Sep '10

19 Sep '10

Author: mhm Date: Sun Sep 19 01:42:36 2010 New Revision: 1179 URL: http://flashrom.org/trac/flashrom/changeset/1179 Log: Add chip IDs for Alliance Semiconductor flash chips. Cross-checked with UniFlash 1.40 source, chip datasheets and EZoFlash's chip database (http://www.ezoflash.com/chip_database.php). Datasheets: http://www.ezoflash.com/datasheets/flash/Alliance/AS29F002.pdf http://www.alsc.com/pdf/flash.pdf/as29f010.pdf http://www.alsc.com/pdf/flash.pdf/as29f040.pdf http://www.alsc.com/pdf/flash.pdf/as29f200.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV160.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV400.pdf http://www.ezoflash.com/datasheets/flash/Alliance/AS29LV800.pdf Signed-off-by: Mattias Mattsson <vitplister(a)gmail.com> Acked-by: Uwe Hermann <uwe(a)hermann-uwe.de> Modified: trunk/flashchips.h Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Sep 17 00:34:25 2010 (r1178) +++ trunk/flashchips.h Sun Sep 19 01:42:36 2010 (r1179) @@ -38,6 +38,18 @@ #define GENERIC_DEVICE_ID 0xffff /* Only match the vendor ID */ #define ALLIANCE_ID 0x52 /* Alliance Semiconductor */ +#define ALLIANCE_AS29F002B 0x34 +#define ALLIANCE_AS29F002T 0xB0 +#define ALLIANCE_AS29F010 0x04 +#define ALLIANCE_AS29F040 0xA4 +#define ALLIANCE_AS29F200B 0x57 +#define ALLIANCE_AS29F200T 0x51 +#define ALLIANCE_AS29LV160B 0x49 +#define ALLIANCE_AS29LV160T 0xCA +#define ALLIANCE_AS29LV400B 0xBA +#define ALLIANCE_AS29LV400T 0xB9 +#define ALLIANCE_AS29LV800B 0x5B +#define ALLIANCE_AS29LV800T 0xDA #define AMD_ID 0x01 /* AMD */ #define AMD_AM29DL400BT 0x0C

1 0

Intel board D945GNT
by Beiad Dalton 19 Sep '10

19 Sep '10

BIOS link: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18416&ProdId…

1 0

Asus m2n68-AM plus motherboard
by Mahesh T. Pai 17 Sep '10

17 Sep '10

Dear team, Board URL:- http://www.asus.com/product.aspx?P_ID=N9gfnjYUinlROPLf Was checking if flashrom supports my mother board, and since there is apparently some trouble, sending this report. <output of flashrom -V> http://www.asus.com/product.aspx?P_ID=N9gfnjYUinlROPLf Was checking if flashrom supports my mother board, and since there is apparently some trouble, sending this report. <output of flashrom -V> flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1274M loops per second, 10 myus = 9 us, 100 myus = 94 us, 1000 myus = 940 us, 10000 myus = 10236 us, 4 myus = 14 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N68-AM Plus" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found ITE Super I/O, id 8712 Found chipset "NVIDIA MCP61", enabling flash write... chipset PCI ID is 10de:03e1, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0x0012, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org! This chipset supports the following protocols: SPI. Super I/O ID 0x8712 is not on the list of flash capable controllers. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Chip status register is 00 Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon EN29F010, 128 KB: skipped. Probing for Eon EN29F002(A)(N)B, 256 KB: skipped. Probing for Eon EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F002BC-T, 256 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for MoselVitelic V29C51000B, 64 KB: skipped. Probing for MoselVitelic V29C51000T, 64 KB: skipped. Probing for MoselVitelic V29C51400B, 512 KB: skipped. Probing for MoselVitelic V29C51400T, 512 KB: skipped. Probing for MoselVitelic V29LC51000, 64 KB: skipped. Probing for MoselVitelic V29LC51001, 128 KB: skipped. Probing for MoselVitelic V29LC51002, 256 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: skipped. Probing for PMC Pm49FL004, 512 KB: skipped. Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x1c, id2 0x13 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BB, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: skipped. Probing for ST M50FLW040B, 512 KB: skipped. Probing for ST M50FLW080A, 1024 KB: skipped. Probing for ST M50FLW080B, 1024 KB: skipped. Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped. Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49F020, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1c, id2 0x3114 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x1c, id2 0x13 === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === No operations were specified. <end output of flashrom -v> Here is outpus of lspci <output of lspci -v -v> 00:00.0 RAM memory: nVidia Corporation MCP61 LPC Bridge (rev a1) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 0900 [size=256] 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 0e00 [size=64] Region 4: I/O ports at 0600 [size=64] Region 5: I/O ports at 0700 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at dfffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at dfffac00 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Device 83a4 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) Subsystem: ASUSTeK Computer Inc. Device 8290 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at dfff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: HDA Intel 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_amd 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at dfff9000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e480 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+ Address: 00000000fee0100c Data: 4181 Masking: 000000fe Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: forcedeth 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at e400 [size=8] Region 1: I/O ports at e080 [size=4] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at dc00 [size=4] Region 4: I/O ports at d880 [size=16] Region 5: Memory at dfff8000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 23 Region 0: I/O ports at d800 [size=8] Region 1: I/O ports at d480 [size=4] Region 2: I/O ports at d400 [size=8] Region 3: I/O ports at d080 [size=4] Region 4: I/O ports at d000 [size=16] Region 5: Memory at dffef000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: sata_nv 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0100c Data: 4149 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #1, PowerLimit 75.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0100c Data: 4151 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: nVidia Corporation Device 0000 Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Address: 00000000fee0100c Data: 4159 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Mapping Address Base: 00000000fee00000 Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #3, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=WRR32 Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Kernel driver in use: pcieport 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dffc0000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: nvidia 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Revision ID: 3.00 Link Frequency: 1.0GHz Link Error: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE- 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- </end output of lspci -v -v> I could also (apparently) read the flash file using flashrom -Vr. The output file is 1048576 bytes. Can send the file if required. Verification goes ok. Here is the output:- <output of verification of read file> $ sudo flashrom -v orig.file flashrom v0.9.2-r1141 on Linux 2.6.32-5-amd64 (x86_64), built with libpci 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. No coreboot table found. Found ITE Super I/O, id 8712 Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... SPI on this chipset is WIP. Write is unsupported! Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. OK. WARNING: unexpected second chipset match: "NVIDIA MCP61" ignoring, please report lspci and board URL to flashrom(a)flashrom.org! This chipset supports the following protocols: SPI. Found chip "Eon EN25F80" (1024 KB, SPI) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED. </end> Flashrom is from the debian unstable repository. Please let me know if any further information is required. -- Mahesh T. Pai

1 0

[PATCH] Make Bus Pirate init more robust
by Carl-Daniel Hailfinger 17 Sep '10

17 Sep '10

Thanks to Johannes Sjölund for reporting that the Bus Pirate init could not deal with a Bus Pirate which is already in binary Bitbang mode. This is caused by a combination of the slowness of the Bus Pirate, the slowness of USB and a fast serial port flush routine which just flushes the buffer contents and does not wait until data arrival stops. Make the Bus Pirate init more robust by running the flush command 10 times with 1.5 ms delay in between. This code development was sponsored by Mattias Mattsson. Thanks! Tested a few dozen times, should work reliably. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-buspirate_resilient_init/buspirate_spi.c =================================================================== --- flashrom-buspirate_resilient_init/buspirate_spi.c (Revision 1099) +++ flashrom-buspirate_resilient_init/buspirate_spi.c (Arbeitskopie) @@ -22,6 +22,7 @@ #include <string.h> #include <stdlib.h> #include <ctype.h> +#include <unistd.h> #include "flash.h" #include "chipdrivers.h" #include "spi.h" @@ -140,6 +141,20 @@ /* Read any response and discard it. */ sp_flush_incoming(); } + /* USB is slow. The Bus Pirate is even slower. Apparently the flush + * action above is too fast or too early. Some stuff still remains in + * the pipe after the flush above, and one additional flush is not + * sufficient either. Use a 1.5 ms delay inside the loop to make + * mostly sure that at least one USB frame had time to arrive. + * Looping only 5 times is not sufficient and causes the + * ocassional failure. + * Folding the delay into the loop above is not reliable either. + */ + for (i = 0; i < 10; i++) { + usleep(1500); + /* Read any response and discard it. */ + sp_flush_incoming(); + } /* Enter raw bitbang mode */ buf[0] = 0x00; ret = buspirate_sendrecv(buf, 1, 5); @@ -147,6 +162,8 @@ return ret; if (memcmp(buf, "BBIO", 4)) { msg_perr("Entering raw bitbang mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); return 1; } msg_pdbg("Raw bitbang mode version %c\n", buf[4]); @@ -158,8 +175,12 @@ /* Enter raw SPI mode */ buf[0] = 0x01; ret = buspirate_sendrecv(buf, 1, 4); + if (ret) + return ret; if (memcmp(buf, "SPI", 3)) { msg_perr("Entering raw SPI mode failed!\n"); + msg_pdbg("Got %02x%02x%02x%02x\n", + buf[0], buf[1], buf[2], buf[3]); return 1; } msg_pdbg("Raw SPI mode version %c\n", buf[3]); Index: flashrom-buspirate_resilient_init/serial.c =================================================================== --- flashrom-buspirate_resilient_init/serial.c (Revision 1099) +++ flashrom-buspirate_resilient_init/serial.c (Arbeitskopie) @@ -199,8 +199,10 @@ #else tmp = write(sp_fd, buf, writecnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port write error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty write\n"); writecnt -= tmp; @@ -220,8 +222,10 @@ #else tmp = read(sp_fd, buf, readcnt); #endif - if (tmp == -1) + if (tmp == -1) { + msg_perr("Serial port read error!\n"); return 1; + } if (!tmp) msg_pdbg("Empty read\n"); readcnt -= tmp; -- http://www.hailfinger.org/

2 3

← Newer
1
...
6
7
8
9
10
11
12
...
22
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom September 2010