flashrom May 2010

flashrom@flashrom.org

64 participants
169 discussions

Working Motherboard (out of the box): ASUS P6T Deluxe
by Konstantin Matuschek 29 Jul '10

29 Jul '10

Hi :-) I was told to send this email on irc, so here it comes ;-) Yesterday I flashed my Motherboard with Flashrom (first backed up with -r, then flashed with -w), it worked out of the box. Note that the V2 Version of this Board, that is already listed on your support list, is a different board and not just a revision (missing SAS, more SATA, different Audio afaik). Motherboard Name: ASUS P6T Deluxe Motherboard Revision: (unknown, my graphics card hides the text and it's quite difficult to remove it - probably there is only one revision) Product Link: http://www.asus.com/product.aspx?P_ID=vXixf82co6Q5v0BZ&templete=2 Bios flashed from v1904 to v2101 Flashrom Version: 0.9.1 Operating System: Gentoo Linux, Vanilla Kernel 2.6.33 Notes: CONFIG_X86_PAT=y and CONFIG_STRICT_DEVMEM=y The output of flashrom -V, lspci -nnvvvxxx and superiotool -deV are linked below, I also attached a file for each of these. Thanks and greetings, Konstantin flashrom -V http://coreboot.pastebin.com/vsDvLvXA lspci -nnvvvxxx http://coreboot.pastebin.com/A0LJ45g4 superiotool -deV http://coreboot.pastebin.com/XkpiHgYH

2 1

Add URLs for three boards, fix a typo and add a note
by Idwer Vollering 27 Jul '10

27 Jul '10

Add URLs for boards ASUS K8V, ASUS K8V SE Deluxe, Elitegroup K7S5A. FIxes a typo, adds a note for ASUS M2N-E. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com>

3 2

[PATCH] drkaiser: MEM BAR fixes
by Carl-Daniel Hailfinger 17 Jul '10

17 Jul '10

Use the BAR value returned by pcidev_init which automatically uses the correct BAR mask. Truncate flash chip addresses to fit into the 128 kB memory window. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-drkaiser_pcibar_mask_mem_bounds_checking/drkaiser.c =================================================================== --- flashrom-drkaiser_pcibar_mask_mem_bounds_checking/drkaiser.c (Revision 946) +++ flashrom-drkaiser_pcibar_mask_mem_bounds_checking/drkaiser.c (Arbeitskopie) @@ -40,16 +40,13 @@ uint32_t addr; get_io_perms(); - pcidev_init(PCI_VENDOR_ID_DRKAISER, PCI_BASE_ADDRESS_2, - drkaiser_pcidev, programmer_param); + addr = pcidev_init(PCI_VENDOR_ID_DRKAISER, PCI_BASE_ADDRESS_2, + drkaiser_pcidev, programmer_param); /* Write magic register to enable flash write. */ pci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR, PCI_MAGIC_DRKAISER_VALUE); - /* TODO: Mask lower bits? How many? 3? 7? */ - addr = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) & ~0x03; - /* Map 128KB flash memory window. */ drkaiser_bar = physmap("Dr. Kaiser PC-Waechter flash memory", addr, 128 * 1024); @@ -70,10 +67,12 @@ void drkaiser_chip_writeb(uint8_t val, chipaddr addr) { - mmio_writeb(val, drkaiser_bar + addr); + /* Restrict flash accesses to the 128kB memory window. */ + mmio_writeb(val, drkaiser_bar + (addr & ((1 << 17) - 1))); } uint8_t drkaiser_chip_readb(const chipaddr addr) { - return mmio_readb(drkaiser_bar + addr); + /* Restrict flash accesses to the 128kB memory window. */ + return mmio_readb(drkaiser_bar + (addr & ((1 << 17) - 1))); } -- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth

2 4

[PATCH] Partial writes for SPI
by Carl-Daniel Hailfinger 11 Jul '10

11 Jul '10

Every SPI programmer driver had its own completely different chip write implementation, and all of them were insufficiently commented. Create spi_write_chunked as a copy of spi_read_chunked and convert all SPI programmers to use it. No functional changes except: - Bus Pirate uses 12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes instead of 1 Byte writes Should work. Not for 0.9.1, but since I had that thing on my disk anyway, I figured I'd post it to the list in case someone wants to experiment with partial writes. Tests appreciated. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-partial_write_spi/spi25.c =================================================================== --- flashrom-partial_write_spi/spi25.c (Revision 982) +++ flashrom-partial_write_spi/spi25.c (Arbeitskopie) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2007, 2008, 2009 Carl-Daniel Hailfinger + * Copyright (C) 2007, 2008, 2009, 2010 Carl-Daniel Hailfinger * Copyright (C) 2008 coresystems GmbH * * This program is free software; you can redistribute it and/or modify @@ -874,7 +874,7 @@ } /* - * Read a complete flash chip. + * Read a part of the flash chip. * Each page is read separately in chunks with a maximum size of chunksize. */ int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) @@ -913,6 +913,52 @@ } /* + * Write a part of the flash chip. + * Each page is written separately in chunks with a maximum size of chunksize. + */ +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +{ + int rc = 0; + int i, j, starthere, lenhere; + /* FIXME: page_size is the wrong variable. We need max_writechunk_size + * in struct flashchip to do this properly. All chips using + * spi_chip_write_256 have page_size set to max_writechunk_size, so + * we're OK for now. + */ + int page_size = flash->page_size; + int towrite; + + /* Warning: This loop has a very unusual condition and body. + * The loop needs to go through each page with at least one affected + * byte. The lowest page number is (start / page_size) since that + * division rounds down. The highest page number we want is the page + * where the last byte of the range lives. That last byte has the + * address (start + len - 1), thus the highest page number is + * (start + len - 1) / page_size. Since we want to include that last + * page as well, the loop condition uses <=. + */ + for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { + /* Byte position of the first byte in the range in this page. */ + /* starthere is an offset to the base address of the chip. */ + starthere = max(start, i * page_size); + /* Length of bytes in the range in this page. */ + lenhere = min(start + len, (i + 1) * page_size) - starthere; + for (j = 0; j < lenhere; j += chunksize) { + towrite = min(chunksize, lenhere - j); + rc = spi_nbyte_program(starthere + j, buf + starthere - start + j, towrite); + if (rc) + break; + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(10); + } + if (rc) + break; + } + + return rc; +} + +/* * Program chip using byte programming. (SLOW!) * This is for chips which can only handle one byte writes * and for chips where memory mapped programming is impossible Index: flashrom-partial_write_spi/buspirate_spi.c =================================================================== --- flashrom-partial_write_spi/buspirate_spi.c (Revision 982) +++ flashrom-partial_write_spi/buspirate_spi.c (Arbeitskopie) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -319,7 +319,6 @@ int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf) { int total_size = 1024 * flash->total_size; - int i; spi_disable_blockprotect(); /* Erase first. */ @@ -330,25 +329,5 @@ } msg_pinfo("done.\n"); - /* FIXME: We could do 12 byte writes, but then we'd have to make sure - * not to cross a 256 byte page boundary. This problem only applies to - * writes, reads can cross page boundaries just fine. - */ - for (i = 0; i < total_size; i += 8) { - int l, r; - if (i + 8 <= total_size) - l = 8; - else - l = total_size - i; - - if ((r = spi_nbyte_program(i, &buf[i], l))) { - msg_perr("%s: write fail %d\n", __func__, r); - return 1; - } - - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - /* loop */; - } - - return 0; + return spi_write_chunked(flash, buf, 0, total_size, 12); } Index: flashrom-partial_write_spi/bitbang_spi.c =================================================================== --- flashrom-partial_write_spi/bitbang_spi.c (Revision 982) +++ flashrom-partial_write_spi/bitbang_spi.c (Arbeitskopie) @@ -1,7 +1,7 @@ /* * This file is part of the flashrom project. * - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -142,24 +142,7 @@ int bitbang_spi_write_256(struct flashchip *flash, uint8_t *buf) { int total_size = 1024 * flash->total_size; - int i; msg_pdbg("total_size is %d\n", total_size); - for (i = 0; i < total_size; i += 256) { - int l, r; - if (i + 256 <= total_size) - l = 256; - else - l = total_size - i; - - if ((r = spi_nbyte_program(i, &buf[i], l))) { - msg_perr("%s: write fail %d\n", __func__, r); - return 1; - } - - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - /* loop */; - } - - return 0; + return spi_write_chunked(flash, buf, 0, total_size, 256); } Index: flashrom-partial_write_spi/ft2232_spi.c =================================================================== --- flashrom-partial_write_spi/ft2232_spi.c (Revision 982) +++ flashrom-partial_write_spi/ft2232_spi.c (Arbeitskopie) @@ -2,7 +2,7 @@ * This file is part of the flashrom project. * * Copyright (C) 2009 Paul Fox <pgf(a)laptop.org> - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -288,7 +288,6 @@ int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf) { int total_size = 1024 * flash->total_size; - int i; spi_disable_blockprotect(); /* Erase first. */ @@ -299,23 +298,7 @@ } msg_pinfo("done.\n"); msg_pdbg("total_size is %d\n", total_size); - for (i = 0; i < total_size; i += 256) { - int l, r; - if (i + 256 <= total_size) - l = 256; - else - l = total_size - i; - - if ((r = spi_nbyte_program(i, &buf[i], l))) { - msg_perr("%s: write fail %d\n", __func__, r); - return 1; - } - - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - /* loop */; - } - - return 0; + return spi_write_chunked(flash, buf, 0, total_size, 256); } #endif Index: flashrom-partial_write_spi/sb600spi.c =================================================================== --- flashrom-partial_write_spi/sb600spi.c (Revision 982) +++ flashrom-partial_write_spi/sb600spi.c (Arbeitskopie) @@ -4,6 +4,7 @@ * Copyright (C) 2008 Wang Qingpei <Qingpei.Wang(a)amd.com> * Copyright (C) 2008 Joe Bao <Zheng.Bao(a)amd.com> * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -49,7 +50,6 @@ /* FIXME: SB600 can write 5 bytes per transaction. */ int sb600_spi_write_1(struct flashchip *flash, uint8_t *buf) { - int i; int total_size = flash->total_size * 1024; int result = 0; @@ -63,19 +63,7 @@ msg_pinfo("done.\n"); msg_pinfo("Programming flash"); - for (i = 0; i < total_size; i++, buf++) { - result = spi_nbyte_program(i, buf, 1); - if (result) { - msg_perr("Write error!\n"); - return result; - } - - /* wait program complete. */ - if (i % 0x8000 == 0) - msg_pspew("."); - while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) - ; - } + result = spi_write_chunked(flash, buf, 0, total_size, 5); msg_pinfo(" done.\n"); return result; } Index: flashrom-partial_write_spi/ichspi.c =================================================================== --- flashrom-partial_write_spi/ichspi.c (Revision 982) +++ flashrom-partial_write_spi/ichspi.c (Arbeitskopie) @@ -5,7 +5,7 @@ * Copyright (C) 2008 Claus Gindhart <claus.gindhart(a)kontron.com> * Copyright (C) 2008 Dominik Geyer <dominik.geyer(a)kontron.com> * Copyright (C) 2008 coresystems GmbH <info(a)coresystems.de> - * Copyright (C) 2009 Carl-Daniel Hailfinger + * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -160,8 +160,6 @@ static int program_opcodes(OPCODES * op); static int run_opcode(OPCODE op, uint32_t offset, uint8_t datalength, uint8_t * data); -static int ich_spi_write_page(struct flashchip *flash, uint8_t * bytes, - int offset, int maxdata); /* for pairing opcodes with their required preop */ struct preop_opcode_pair { @@ -645,28 +643,6 @@ return -1; } -static int ich_spi_write_page(struct flashchip *flash, uint8_t * bytes, - int offset, int maxdata) -{ - int page_size = flash->page_size; - uint32_t remaining = page_size; - int towrite; - - msg_comm_debug("ich_spi_write_page: offset=%d, number=%d, buf=%p\n", - offset, page_size, bytes); - - for (; remaining > 0; remaining -= towrite) { - towrite = min(remaining, maxdata); - if (spi_nbyte_program(offset + (page_size - remaining), - &bytes[page_size - remaining], towrite)) { - printf_debug("Error writing"); - return 1; - } - } - - return 0; -} - int ich_spi_read(struct flashchip *flash, uint8_t * buf, int start, int len) { int maxdata = 64; @@ -679,12 +655,14 @@ int ich_spi_write_256(struct flashchip *flash, uint8_t * buf) { - int i, j, rc = 0; + int i, ret = 0; int total_size = flash->total_size * 1024; - int page_size = flash->page_size; int erase_size = 64 * 1024; int maxdata = 64; + if (spi_controller == SPI_CONTROLLER_VIA) + maxdata = 16; + spi_disable_blockprotect(); /* Erase first */ printf("Erasing flash before programming... "); @@ -696,19 +674,15 @@ printf("Programming page: \n"); for (i = 0; i < total_size / erase_size; i++) { - if (spi_controller == SPI_CONTROLLER_VIA) - maxdata = 16; - - for (j = 0; j < erase_size / page_size; j++) { - ich_spi_write_page(flash, - (void *)(buf + (i * erase_size) + (j * page_size)), - (i * erase_size) + (j * page_size), maxdata); - } + ret = spi_write_chunked(flash, buf + (i * erase_size), + i * erase_size, erase_size, maxdata); + if (ret) + break; } printf("\n"); - return rc; + return ret; } int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, Index: flashrom-partial_write_spi/chipdrivers.h =================================================================== --- flashrom-partial_write_spi/chipdrivers.h (Revision 982) +++ flashrom-partial_write_spi/chipdrivers.h (Arbeitskopie) @@ -51,6 +51,7 @@ int spi_nbyte_program(int addr, uint8_t *bytes, int len); int spi_nbyte_read(int addr, uint8_t *bytes, int len); int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); +int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); int spi_aai_write(struct flashchip *flash, uint8_t *buf); /* 82802ab.c */ -- http://www.hailfinger.org/

3 8

[PATCH] Support for HP DL165 G6
by Arne Georg Gleditsch 01 Jul '10

01 Jul '10

Hi, Attached is a patch to board_enable.c for the HP DL165 board. Apparently, the PCI signature of the DL165 is identical to the DL145, but the enable pins are placed differently... :/ I'm not sure what the best way to handle that is. Signed-off-by: Arne Georg Gleditsch <arne.gleditsch(a)numascale.com> -- Arne.

3 9

report for AMIC A49LF040A
by Guenter 24 Jun '10

24 Jun '10

Hi, I've successfully used flashrom to read, write, verify the AMIC A49LF040A chip on a PC-Engines Alix 2C3 board. Can you please mark this chip as supported? BTW. I would like to subscribe with this email (lists(a)gknw.net) to the flashrom-devel list, but unfortunately the mailman interface doesnt work for me - I never get the confirmation mail (tried a couple of times, also with a gmx account); can you please manually subscribe me? Thanks, Günter. Attachment: flashrom verbose output.

3 11

Test Report: SST SST39SF020A
by Michael Marineau 24 Jun '10

24 Jun '10

Greetings, Flashrom is reporting the following to me, requesting a test report: Found chip "SST SST39SF020A" (256 KB, Parallel) at physical address 0xfffc0000. This flash part has status UNTESTED for operations: ERASE Erase/Write operations appear to work perfectly fine, attached is the verbose log from a write. The mainboard used is an VIA EPIA-MII. Cheers, -- Michael Marineau

2 1

Re: [flashrom] [PATCH] Board-enable for MS-7025 (K8N Neo2 Platinum)
by rider 13 Jun '10

13 Jun '10

So, it works like a charm. I would like to thank Michael once again, it was truly amazing expirience. Cheers, Valentine "Pegasus rider" Yatsenko.

3 2

Re: [flashrom] [PATCH] VIA: disable byte merging
by Carl-Daniel Hailfinger 13 Jun '10

13 Jun '10

[updated to apply to latest svn] All mentioned north bridges have been checked against data sheet. That's all north bridges google found a datasheet for with "byte enable" included. Second revision. Should now run multiple chipset enables if the first one requests further enables to be run. VIA byte-merging logic tested: works. multiple chipset logic: completely untested Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Index: flashrom-via_no_byte_merge/chipset_enable.c =================================================================== --- flashrom-via_no_byte_merge/chipset_enable.c (Revision 998) +++ flashrom-via_no_byte_merge/chipset_enable.c (Arbeitskopie) @@ -34,6 +34,8 @@ #include <fcntl.h> #include "flash.h" +#define NOT_DONE_YET 1 + extern int ichspi_lock; static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name) @@ -639,6 +641,32 @@ return enable_flash_ich_dc_spi(dev, name, 10); } +static void via_do_byte_merge(void * arg) +{ + struct pci_dev * dev = arg; + uint8_t val; + + msg_pdbg("Re-enabling byte merging\n"); + val = pci_read_byte(dev, 0x71); + val |= 0x40; + pci_write_byte(dev, 0x71, val); +} + +static int via_no_byte_merge(struct pci_dev *dev, const char *name) +{ + uint8_t val; + + val = pci_read_byte(dev, 0x71); + if (val & 0x40) + { + msg_pdbg("Disabling byte merging\n"); + val &= ~0x40; + pci_write_byte(dev, 0x71, val); + register_shutdown(via_do_byte_merge, dev); + } + return NOT_DONE_YET; /* need to find south bridge, too */ +} + static int enable_flash_vt823x(struct pci_dev *dev, const char *name) { uint8_t val; @@ -1405,6 +1433,14 @@ {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis540}, {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis540}, {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis540}, + /* VIA northbridges */ + {0x1106, 0x0585, NT, "VIA", "VT82C585VPX", via_no_byte_merge}, + {0x1106, 0x0595, NT, "VIA", "VT82C595", via_no_byte_merge}, + {0x1106, 0x0597, NT, "VIA", "VT82C597", via_no_byte_merge}, + {0x1106, 0x0691, NT, "VIA", "VT82C69x", via_no_byte_merge}, /* 691, 693a, 694t, 694x checked */ + {0x1106, 0x0601, NT, "VIA", "VT8601/VT8601A", via_no_byte_merge}, + {0x1106, 0x8601, NT, "VIA", "VT8601T", via_no_byte_merge}, + /* VIA southbridges */ {0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x}, {0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x}, {0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x}, @@ -1431,22 +1467,31 @@ for (i = 0; chipset_enables[i].vendor_name != NULL; i++) { dev = pci_dev_find(chipset_enables[i].vendor_id, chipset_enables[i].device_id); - if (dev) - break; - } - - if (dev) { + if (!dev) + continue; + if (ret != -2) { + msg_pinfo("WARNING: unexpected second chipset match: " + "\"%s %s\"\nignoring, please report lspci and " + "board URL to flashrom(a)flashrom.org!\n", + chipset_enables[i].vendor_name, + chipset_enables[i].device_name); + continue; + } msg_pinfo("Found chipset \"%s %s\", enabling flash write... ", chipset_enables[i].vendor_name, chipset_enables[i].device_name); ret = chipset_enables[i].doit(dev, chipset_enables[i].device_name); - if (ret) + if (ret == NOT_DONE_YET) { + ret = -2; + msg_pinfo("OK - searching further chips.\n"); + } else if (ret < 0) msg_pinfo("FAILED!\n"); - else + else if(ret == 0) msg_pinfo("OK.\n"); } + msg_pinfo("This chipset supports the following protocols: %s.\n", flashbuses_to_text(buses_supported)); -- http://www.hailfinger.org/

2 2

Motherboard report: Abit NF-M2 nView
by Michael 12 Jun '10

12 Jun '10

My Abit NF-M2 nView (NVIDIA 6150/NF430) motherboard doesn't appear to be supported by flashrom yet (it recognizes the chip and chipset, but it seems that write enable is not set). The official BIOS downloads for this board are here: http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NA… AM2&pPRODINFO=BIOS I've tried writing the .bin files from the BIOS archives on that page and all of them fail to verify. Here's the output of 'flashrom -V', 'lspci -nnvvvxxx', and 'superiotool -deV': Script started on Fri 09 Apr 2010 11:56:24 AM EDT # flashrom -V Calibrating delay loop... 527M loops per second. OK. No coreboot table found. Found chipset "NVIDIA MCP51", enabling flash write... OK. Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI chipset detected Probing for AMIC Technology A25L40P, 512 KB: spi_command called, but no SPI chipset detected Probing for AMIC Technology A49LF040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for AMIC Technology A29040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI chipset detected Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI chipset detected Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI chipset detected Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI chipset detected Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0x9d, id2 0x6e Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI chipset detected Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI chipset detected Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI chipset detected Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI chipset detected Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI chipset detected Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI chipset detected Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Found chip "PMC Pm49FL004" (512 KB) at physical address 0xfff80000. Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI chipset detected Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI chipset detected Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI chipset detected Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x49, id2 0x4d Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x49, id2 0x4d Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI chipset detected Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI chipset detected Probing for ST M25P20, 256 KB: spi_command called, but no SPI chipset detected Probing for ST M25P40, 512 KB: spi_command called, but no SPI chipset detected Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI chipset detected Probing for ST M25P80, 1024 KB: spi_command called, but no SPI chipset detected Probing for ST M25P16, 2048 KB: spi_command called, but no SPI chipset detected Probing for ST M25P32, 4096 KB: spi_command called, but no SPI chipset detected Probing for ST M25P64, 8192 KB: spi_command called, but no SPI chipset detected Probing for ST M25P128, 16384 KB: spi_command called, but no SPI chipset detected Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x49, id2 0x4d Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x49, id2 0x44 Probing for ST M29W010B, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0x9d, id2 0x6e Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x49, id2 0x4d Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI chipset detected Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI chipset detected Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI chipset detected Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI chipset detected Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W29EE011, 128 KB: === Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. === Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x9d, id2 0x6e Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xff, did 0xff Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: vid 0x9d, did 0x6e Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no SPI chipset detected Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called, but no SPI chipset detected Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no SPI chipset detected Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no SPI chipset detected Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI chipset detected No operations were specified. # lspci -nnvvvxxx 00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 1.0GHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 800MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 f0 02 06 00 b0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 7b 14 26 1c 08 e0 e0 01 22 00 11 11 22 30 11 00 50: 23 06 7f 80 03 05 7f 80 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 05 00 70: 44 44 41 00 d0 09 00 00 11 00 00 00 11 11 88 00 80: 23 99 88 00 1f 00 64 0c 03 00 00 00 7f 00 00 00 90: 78 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 61 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 10 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- 00: de 10 fa 02 00 01 20 40 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 10 00 21 21 14 00 11 11 00 00 03 00 00 00 60: 21 88 13 02 de 8f e1 1f 08 72 4e 10 02 3f 00 20 70: 10 32 54 0a 10 00 00 00 a0 00 00 00 20 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 50 3f 90 3f 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 01 00 00 00 80 f9 fd 00 e0: 00 00 c9 fe 00 00 00 00 00 fc ff ff 00 00 00 00 f0: 00 00 00 00 c7 02 32 00 00 00 00 00 00 00 00 00 00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 fe 02 00 00 20 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 7b 14 26 1c 9b a0 1c 60 9b a0 c0 21 00 00 00 00 50: 00 00 00 00 00 00 00 00 7b 01 d1 f2 02 1f 1c 80 60: 02 1f 1c 00 00 00 00 00 02 10 1c a0 02 0c 1c 90 70: 02 10 1c 90 02 14 1c 90 02 0c 1c 80 02 10 1c 80 80: 02 14 1c 80 02 18 1c 80 02 1c 1c 80 01 10 1c 80 90: 02 14 1c 80 11 00 11 00 32 01 00 00 00 00 00 00 a0: c2 00 40 01 10 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 41 23 05 08 c0: fd ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 f8 02 00 00 a0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 7b 14 26 1c 00 00 00 00 02 10 1c 80 02 10 1c a0 50: 02 0c 1c 90 02 10 1c 90 02 14 1c 90 02 0c 1c 80 60: 02 10 1c 80 02 14 1c 80 02 18 1c 80 02 1c 1c 80 70: 01 10 1c 80 1f 20 c0 81 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 08 02 1f 1c 80 70 20 00 00 90: 89 da 01 09 00 00 00 00 11 00 10 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 08 00 00 00 d2 18 00 00 10 00 02 00 00 00 00 00 c0: 00 80 00 00 00 00 00 00 0f 01 00 05 00 00 00 00 d0: 00 00 f0 03 00 04 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 60 ea 10 10 18 00 00 20 00 00 00 00 00 00 00 00 00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 f9 02 06 00 a0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: ef dd 7b 2f f7 de 7b 2f f7 de 7b 2f f7 02 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 70: 0a 00 00 00 03 00 00 00 25 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 05 00 00 00 04 00 00 00 90: 03 04 00 00 01 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: ff 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] #00 [00fe] Capabilities: [fc] #00 [0000] 00: de 10 ff 02 06 00 b0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 17 00 00 00 00 fe fe 00 00 fe fe 00 00 fe fe 00 50: 00 fe fe 00 00 fe fe 00 00 fe fe 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 7f 02 00 01 20 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 08 00 00 00 00 00 00 00 00 80 cb fe 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 7e 02 00 00 20 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 7b 14 26 1c 11 00 00 00 64 06 00 00 11 00 00 00 50: 64 05 00 00 60 00 40 00 60 70 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 04 b0: ff ff 03 00 10 11 00 00 ac 10 20 00 30 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:05.0 VGA compatible controller [0300]: nVidia Corporation C51PV [GeForce 6150] [10de:0240] (rev a2) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Device [10de:0222] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 88000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia 00: de 10 40 02 07 00 b0 00 a2 00 00 03 00 00 00 00 10: 00 00 00 fc 0c 00 00 e0 00 00 00 00 04 00 00 fb 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 22 02 30: 00 00 00 00 48 00 00 00 00 00 00 00 05 01 00 00 40: de 10 22 02 00 00 00 00 01 50 02 00 00 00 00 00 50: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 00 00 04 00 00 00 00 00 00 00 01 00 00 00 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 00 00 f8 00 00 00 00 04 00 00 00 00 ff ff ff ff b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL- Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b- Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- Revision ID: 1.03 Link Frequency 0: 800MHz Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- Link Frequency 1: 200MHz Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- Prefetchable memory behind bridge Upper: 00-00 Bus Number: 00 Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 70 02 06 00 b0 00 a2 00 00 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 7b 14 26 1c 08 e0 e9 01 22 30 00 00 d0 00 00 00 50: 23 05 7f 80 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 05 00 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 55 00 80: 23 55 55 00 fa 00 64 0c 03 00 00 00 7f 00 00 00 90: 78 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: de 10 60 02 0f 00 a0 00 a2 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 7b 14 26 1c 00 f0 ff fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff 70: 10 00 ff ff c5 00 00 00 00 00 04 19 00 b0 00 05 80: 09 a0 00 ba 05 ba 00 00 c0 00 00 01 00 00 00 00 90: 00 00 00 00 00 00 00 00 21 47 65 b7 ef cd 00 00 a0: 00 00 10 80 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 95 02 97 02 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at 1c00 [size=64] Region 5: I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00: de 10 64 02 01 00 b0 00 a2 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 1c 00 00 41 1c 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00 40: 7b 14 26 1c 01 00 02 c0 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00 70: 01 00 00 00 00 00 c8 fe 00 00 fe fe 01 20 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 18 10 05 00 00 a0 80 00 80 30 00 00 41 44 44 11 f0: 5a ff 5f bf 00 00 00 c0 10 00 00 00 00 00 00 00 00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: de 10 72 02 00 04 a0 00 a2 00 00 05 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 10 00 00 10 00 00 10 10 50: 10 10 10 10 00 00 00 00 00 00 00 00 00 00 00 00 60: 02 03 00 00 12 00 00 00 02 00 00 00 10 01 12 00 70: 32 33 00 00 03 00 00 00 00 00 00 00 12 01 00 00 80: 10 00 00 00 00 00 00 00 00 00 00 00 30 02 00 00 90: 00 00 00 00 01 20 00 00 01 00 00 00 00 09 00 00 a0: 01 02 00 00 00 10 00 00 05 00 00 00 01 00 00 00 b0: 00 10 00 80 01 00 00 80 00 00 00 00 02 00 00 00 c0: 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00: de 10 6d 02 07 00 b0 00 a2 10 03 0c 00 00 80 00 10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01 40: 7b 14 26 1c 01 00 02 fe 00 00 00 00 00 00 00 00 50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 10 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00: de 10 6e 02 06 00 b0 00 a2 20 03 0c 00 00 80 00 10: 00 e0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01 40: 7b 14 26 1c 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 03 3c 0a 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 04 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00 b0: 33 00 11 22 00 00 00 00 ff 00 00 00 00 00 00 00 c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f400 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: AMD_IDE Kernel modules: ide-pci-generic, amd74xx, ata_generic 00: de 10 65 02 05 00 b0 00 a1 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 f4 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 7b 14 26 1c 01 00 02 00 00 00 00 00 00 00 00 00 50: 03 f0 01 00 00 00 00 00 a8 a8 a8 20 2a 00 99 20 60: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 80 70 98 79 00 00 02 10 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at e000 [size=16] Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv Kernel modules: ide-pci-generic, ata_generic, sata_nv 00: de 10 66 02 07 00 b0 00 a1 85 01 01 00 00 00 00 10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00 20: 01 e0 00 00 00 d0 02 fe 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 7b 14 26 1c 01 b0 02 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 00 00 00 00 a8 20 a8 20 66 00 20 20 60: 00 c7 00 c6 51 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 c0 00 c0 8f 23 00 00 58 80 00 d0 ba 16 90: 00 00 08 80 00 00 00 00 06 00 06 10 00 00 01 01 a0: 14 10 00 2c 00 00 00 00 00 00 00 00 33 33 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 0a 00 02 28 42 00 00 00 00 00 00 00 40 03 60 e0 e0: 0a 00 02 26 42 00 00 00 00 00 00 00 e0 01 04 e1 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at cc00 [size=16] Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: sata_nv Kernel modules: ide-pci-generic, ata_generic, sata_nv 00: de 10 67 02 07 00 b0 00 a1 85 01 01 00 00 00 00 10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00 20: 01 cc 00 00 00 c0 02 fe 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01 40: 7b 14 26 1c 01 b0 02 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 00 00 00 00 a8 a8 a8 a8 aa 00 99 99 60: 00 00 00 00 51 0c 00 00 00 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 c0 b6 ba d3 17 00 00 73 1a aa f0 95 ff 90: 00 00 7d 14 00 00 00 00 06 00 06 10 00 00 01 01 a0: 14 10 00 00 00 00 00 00 00 00 00 00 33 33 00 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8 d0: 0a 00 02 28 42 00 00 00 00 00 00 00 10 14 00 00 e0: 0a 00 02 26 42 00 00 00 00 00 00 00 0f 00 10 00 f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: [b8] Subsystem: Gammagraphx, Inc. Device [0000:0000] Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed- Mapping Address Base: 00000000fee00000 00: de 10 6f 02 07 00 b0 00 a2 01 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 04 20 90 90 80 82 20: b0 fd b0 fd a0 fd a0 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 02 40: 00 00 03 00 01 00 02 00 05 00 00 00 00 00 44 00 50: 00 00 fe 7f 00 00 00 00 ff 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 07 00 00 84 f0 bf fd 00 00 00 00 08 00 01 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 06 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 00 00 00 00 c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 11 Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00: de 10 6c 02 06 00 b0 00 a2 00 03 04 00 00 80 00 10: 00 40 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05 40: 7b 14 26 1c 01 50 02 c0 00 00 00 00 01 01 0f 00 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 46 00 29 00 00 00 00 00 00 00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a1) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=0 PME- Kernel driver in use: forcedeth Kernel modules: forcedeth 00: de 10 69 02 07 00 b0 00 a1 00 80 06 00 00 00 00 10: 00 b0 02 fe 01 c8 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14 40: 7b 14 26 1c 01 00 02 fe 00 01 00 00 0b 00 00 10 50: 05 6c 84 01 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 0f cc 0e 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00 90: 69 01 61 01 00 00 04 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 90: 03 00 80 00 00 ff ef 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 03 00 f4 00 00 02 fe 00 b0: 03 00 f0 00 80 4f f0 00 00 00 00 00 00 00 00 00 c0: 13 80 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: e0 3e 78 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 02 00 00 00 00 00 00 00 24 c2 bc 5d 20 13 13 00 90: 10 0c 01 00 5b 80 10 77 24 00 00 80 20 25 20 00 a0: ed 02 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: d4 e2 73 f7 79 00 00 00 eb ab 0c 10 40 11 00 0a c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 65 84 11 15 26 3e 01 82 82 3a 64 a3 b9 19 21 2c e0: 00 23 12 48 4b e0 10 08 24 02 28 a3 10 00 e9 1c f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 04 00 40 00 10 02 00 00 00 00 00 00 00 00 50: 40 a1 14 84 85 00 00 00 00 00 00 00 c0 ef af 6b 60: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 12 51 21 20 30 50 00 2a 00 08 2e 22 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 c9 0a 00 00 10 e0 f0 76 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 40 08 25 25 25 00 e0: 00 00 00 00 24 22 4e 00 19 07 00 00 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 f2 0f 04 00 04:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp. Device [147b:1c26] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fdbff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fdbf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: ohci1394 Kernel modules: ohci1394 00: 4c 10 23 80 06 00 10 02 00 10 00 0c 10 40 00 00 10: 00 f0 bf fd 00 80 bf fd 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 26 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00 f0: 10 00 00 00 82 10 00 00 7b 14 26 1c 00 00 00 00 # superiotool -deV superiotool r3125 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x8400, id=0x6388 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x2e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x8863, rev=0xf Probing for ITE Super I/O (init=0x87,0x01,0x55,0x55/0xaa) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627EHF/EF/EHG/EG (id=0x88, rev=0x63) at 0x2e Register dump: idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val 88 63 ff 00 84 00 00 ff 50 00 7c c0 08 01 00 ff def 88 MM ff 00 MM 00 MM RR 50 04 00 RR 00 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 00 00 00 04 38 def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 00 00 00 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 00 00 00 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 80 def 01 00 60 00 64 01 0c 83 LDN 0x06 (Serial flash interface) idx 30 62 63 val 00 ff ff def 00 00 00 LDN 0x07 (GPIO 1, GPIO 6, game port, MIDI port) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 f7 val 01 00 00 00 00 00 fd 00 00 02 ff ff ff 00 def 00 02 01 03 30 09 ff 00 00 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED) idx 30 f5 f6 f7 val 00 ff 00 ff def 00 00 00 00 LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5, SUSLED) idx 30 e0 e1 e2 e3 e4 e5 f0 f1 f2 f3 f4 f5 f6 f7 val 00 ff ff ff ff ff ff ff ff ff 00 ff ff ff ff def 00 ff 00 00 ff 00 00 ff 00 00 00 ff 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 f2 f3 f4 f6 f7 val 00 00 00 00 23 26 00 00 1c 00 09 7c 00 00 00 00 def 00 00 01 00 ff 08 00 RR 00 00 RR 7c 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 val 01 02 90 00 c1 3f def 00 00 00 00 c1 00 Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff # exit Script done on Fri 09 Apr 2010 11:57:25 AM EDT

2 1

← Newer
1
2
3
4
5
6
7
...
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom May 2010