flashrom November 2010

flashrom@flashrom.org

58 participants
146 discussions

[commit] r1229 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 04:18:41 2010 New Revision: 1229 URL: http://flashrom.org/trac/flashrom/changeset/1229 Log: ft2232_spi: allow 5x clock divisor to be set at runtime. Check at init time whether the chip is a type 'H' (FT2232H or FT4232H). If not, omit the disable-divide-by-5 (0x8a) command which can confuse older chips. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Nov 10 04:10:41 2010 (r1228) +++ trunk/ft2232_spi.c Wed Nov 10 04:18:41 2010 (r1229) @@ -46,11 +46,11 @@ * The 'H' chips can run internally at either 12MHz or 60MHz. * The non-H chips can only run at 12MHz. */ -#define CLOCK_5X 1 +static uint8_t clock_5x = 1; /* * In either case, the divisor is a simple integer clock divider. - * If CLOCK_5X is set, this divisor divides 30MHz, else it divides 6MHz. + * If clock_5x is set, this divisor divides 30MHz, else it divides 6MHz. */ #define DIVIDE_BY 3 /* e.g. '3' will give either 10MHz or 2MHz SPI clock. */ @@ -131,6 +131,7 @@ int ft2232_type = FTDI_FT4232H_PID; enum ftdi_interface ft2232_interface = INTERFACE_B; char *arg; + double mpsse_clk; arg = extract_programmer_param("type"); if (arg) { @@ -186,6 +187,12 @@ exit(-1); // TODO } + if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H) { + msg_pdbg("FTDI chip type %d is not high-speed\n", + ftdic->type); + clock_5x = 0; + } + if (ftdi_set_interface(ftdic, ft2232_interface) < 0) { msg_perr("Unable to select interface: %s\n", ftdic->error_str); @@ -207,18 +214,16 @@ msg_perr("Unable to set bitmode to SPI\n"); } -#if CLOCK_5X - msg_pdbg("Disable divide-by-5 front stage\n"); - buf[0] = 0x8a; /* Disable divide-by-5. */ - if (send_buf(ftdic, buf, 1)) - return -1; -#define MPSSE_CLK 60.0 - -#else - -#define MPSSE_CLK 12.0 + if (clock_5x) { + msg_pdbg("Disable divide-by-5 front stage\n"); + buf[0] = 0x8a; /* Disable divide-by-5. */ + if (send_buf(ftdic, buf, 1)) + return -1; + mpsse_clk = 60.0; + } else { + mpsse_clk = 12.0; + } -#endif msg_pdbg("Set clock divisor\n"); buf[0] = 0x86; /* command "set divisor" */ /* valueL/valueH are (desired_divisor - 1) */ @@ -227,8 +232,10 @@ if (send_buf(ftdic, buf, 3)) return -1; - msg_pdbg("SPI clock is %fMHz\n", - (double)(MPSSE_CLK / (((DIVIDE_BY - 1) + 1) * 2))); + msg_pdbg("MPSSE clock: %f MHz divisor: %d " + "SPI clock: %f MHz\n", + mpsse_clk, DIVIDE_BY, + (double)(mpsse_clk / (((DIVIDE_BY - 1) + 1) * 2))); /* Disconnect TDI/DO to TDO/DI for loopback. */ msg_pdbg("No loopback of TDI/DO TDO/DI\n");

1 0

[commit] r1228 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 04:10:41 2010 New Revision: 1228 URL: http://flashrom.org/trac/flashrom/changeset/1228 Log: Retry short reads in ft2232_spi. It is possible that ftdi_read_data() returns less data than requested. Catch this case and retry reading the rest of the buffer. Signed-off-by: Alex Badea <vamposdecampos(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/ft2232_spi.c Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Wed Nov 10 00:30:43 2010 (r1227) +++ trunk/ft2232_spi.c Wed Nov 10 04:10:41 2010 (r1228) @@ -108,11 +108,16 @@ int size) { int r; - r = ftdi_read_data(ftdic, (unsigned char *) buf, size); - if (r < 0) { - msg_perr("ftdi_read_data: %d, %s\n", r, - ftdi_get_error_string(ftdic)); - return 1; + + while (size > 0) { + r = ftdi_read_data(ftdic, (unsigned char *) buf, size); + if (r < 0) { + msg_perr("ftdi_read_data: %d, %s\n", r, + ftdi_get_error_string(ftdic)); + return 1; + } + buf += r; + size -= r; } return 0; }

1 0

[PATCH v2] DediProg: support for firmware version 5.1.5
by Mathias Krause 10 Nov '10

10 Nov '10

Hi, the DediProg firmware version 5.1.5 of the SF-100 works just fine. Also I've added error handling for the initial USB command to catch -EPERM errors. This version allows any firmware version from 2.x.y to 5.x.y, as suggested by Carl Daniel. Signed-off-by: Mathias Krause <mathias.krause(a)secunet.com> Regards, Mathias

2 1

[commit] r1227 - trunk
by repository service 10 Nov '10

10 Nov '10

Author: hailfinger Date: Wed Nov 10 00:30:43 2010 New Revision: 1227 URL: http://flashrom.org/trac/flashrom/changeset/1227 Log: DediProg firmware version 5.1.5 of the SF-100 works just fine. Allow any firmware version from 2.x.y to 5.x.y. Handle errors for the initial USB command to catch -EPERM. Signed-off-by: Mathias Krause <mathias.krause(a)secunet.com> Acked-by: Patrick Georgi <patrick(a)georgi-clan.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dediprog.c Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Tue Nov 9 23:00:31 2010 (r1226) +++ trunk/dediprog.c Wed Nov 10 00:30:43 2010 (r1227) @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <stdio.h> #include <string.h> #include <usb.h> #include "flash.h" @@ -192,6 +193,7 @@ static int dediprog_check_devicestring(void) { int ret; + int fw[3]; char buf[0x11]; /* Command Prepare Receive Device String. */ @@ -216,10 +218,14 @@ msg_perr("Device not a SF100!\n"); return 1; } + if (sscanf(buf, "SF100 V:%d.%d.%d ", &fw[0], &fw[1], &fw[2]) != 3) { + msg_perr("Unexpected firmware version string!\n"); + return 1; + } /* Only these versions were tested. */ - if (memcmp(buf, "SF100 V:2.1.1 ", 0x10) && - memcmp(buf, "SF100 V:3.1.8 ", 0x10)) { - msg_perr("Unexpected firmware version!\n"); + if (fw[0] < 2 || fw[0] > 5) { + msg_perr("Unexpected firmware version %d.%d.%d!\n", fw[0], + fw[1], fw[2]); return 1; } return 0; @@ -236,6 +242,10 @@ memset(buf, 0, sizeof(buf)); ret = usb_control_msg(dediprog_handle, 0xc3, 0xb, 0x0, 0x0, buf, 0x1, DEFAULT_TIMEOUT); + if (ret < 0) { + msg_perr("Command A failed (%s)!\n", usb_strerror()); + return 1; + } if ((ret != 0x1) || (buf[0] != 0x6f)) { msg_perr("Unexpected response to Command A!\n"); return 1;

1 0

[commit] r1226 - trunk
by repository service 09 Nov '10

09 Nov '10

Author: hailfinger Date: Tue Nov 9 23:00:31 2010 New Revision: 1226 URL: http://flashrom.org/trac/flashrom/changeset/1226 Log: Support setting the Dediprog SF100 SPI voltage. Add a generic voltage parameter parser. Move tolower_string() from dummyflasher.c to flashrom.c to make it available everywhere. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Reinauer <stepan(a)coreboot.org> Modified: trunk/dediprog.c trunk/dummyflasher.c trunk/flash.h trunk/flashrom.8 trunk/flashrom.c Modified: trunk/dediprog.c ============================================================================== --- trunk/dediprog.c Fri Nov 5 15:51:59 2010 (r1225) +++ trunk/dediprog.c Tue Nov 9 23:00:31 2010 (r1226) @@ -55,34 +55,35 @@ //int usb_control_msg(usb_dev_handle *dev, int requesttype, int request, int value, int index, char *bytes, int size, int timeout); -static int dediprog_set_spi_voltage(uint16_t voltage) +static int dediprog_set_spi_voltage(int millivolt) { int ret; - unsigned int mv; + uint16_t voltage_selector; - switch (voltage) { - case 0x0: + switch (millivolt) { + case 0: /* Admittedly this one is an assumption. */ - mv = 0; + voltage_selector = 0x0; break; - case 0x12: - mv = 1800; + case 1800: + voltage_selector = 0x12; break; - case 0x11: - mv = 2500; + case 2500: + voltage_selector = 0x11; break; - case 0x10: - mv = 3500; + case 3500: + voltage_selector = 0x10; break; default: - msg_perr("Unknown voltage selector 0x%x! Aborting.\n", voltage); + msg_perr("Unknown voltage %i mV! Aborting.\n", millivolt); return 1; } - msg_pdbg("Setting SPI voltage to %u.%03u V\n", mv / 1000, mv % 1000); + msg_pdbg("Setting SPI voltage to %u.%03u V\n", millivolt / 1000, + millivolt % 1000); - ret = usb_control_msg(dediprog_handle, 0x42, 0x9, voltage, 0xff, NULL, 0x0, DEFAULT_TIMEOUT); + ret = usb_control_msg(dediprog_handle, 0x42, 0x9, voltage_selector, 0xff, NULL, 0x0, DEFAULT_TIMEOUT); if (ret != 0x0) { - msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage); + msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage_selector); return 1; } return 0; @@ -279,13 +280,74 @@ } #endif +static int parse_voltage(char *voltage) +{ + char *tmp = NULL; + int i; + int millivolt; + int fraction = 0; + + if (!voltage || !strlen(voltage)) { + msg_perr("Empty voltage= specified.\n"); + return -1; + } + millivolt = (int)strtol(voltage, &tmp, 0); + voltage = tmp; + /* Handle "," and "." as decimal point. Everything after it is assumed + * to be in decimal notation. + */ + if ((*voltage == '.') || (*voltage == ',')) { + voltage++; + for (i = 0; i < 3; i++) { + fraction *= 10; + /* Don't advance if the current character is invalid, + * but continue multiplying. + */ + if ((*voltage < '0') || (*voltage > '9')) + continue; + fraction += *voltage - '0'; + voltage++; + } + /* Throw away remaining digits. */ + voltage += strspn(voltage, "0123456789"); + } + /* The remaining string must be empty or "mV" or "V". */ + tolower_string(voltage); + + /* No unit or "V". */ + if ((*voltage == '\0') || !strncmp(voltage, "v", 1)) { + millivolt *= 1000; + millivolt += fraction; + } else if (!strncmp(voltage, "mv", 2) || + !strncmp(voltage, "milliv", 6)) { + /* No adjustment. fraction is discarded. */ + } else { + /* Garbage at the end of the string. */ + msg_perr("Garbage voltage= specified.\n"); + return -1; + } + return millivolt; +} + /* URB numbers refer to the first log ever captured. */ int dediprog_init(void) { struct usb_device *dev; + char *voltage; + int millivolt = 3500; msg_pspew("%s\n", __func__); + voltage = extract_programmer_param("voltage"); + if (voltage) { + millivolt = parse_voltage(voltage); + free(voltage); + if (millivolt < 0) { + return 1; + } + msg_pinfo("Setting voltage to %i mV\n", millivolt); + } + /* Here comes the USB stuff. */ usb_init(); usb_find_busses(); @@ -315,7 +377,7 @@ if (dediprog_command_c()) return 1; /* URB 11. Command Set SPI Voltage. */ - if (dediprog_set_spi_voltage(0x10)) + if (dediprog_set_spi_voltage(millivolt)) return 1; buses_supported = CHIP_BUSTYPE_SPI; Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Fri Nov 5 15:51:59 2010 (r1225) +++ trunk/dummyflasher.c Tue Nov 9 23:00:31 2010 (r1226) @@ -19,7 +19,6 @@ #include <string.h> #include <stdlib.h> -#include <ctype.h> #include "flash.h" #include "chipdrivers.h" #include "programmer.h" @@ -61,12 +60,6 @@ static int spi_write_256_chunksize = 256; -static void tolower_string(char *str) -{ - for (; *str != '\0'; str++) - *str = (char)tolower((unsigned char)*str); -} - int dummy_init(void) { char *bustext = NULL; Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Fri Nov 5 15:51:59 2010 (r1225) +++ trunk/flash.h Tue Nov 9 23:00:31 2010 (r1226) @@ -197,6 +197,7 @@ int read_flash_to_file(struct flashchip *flash, char *filename); int min(int a, int b); int max(int a, int b); +void tolower_string(char *str); char *extract_param(char **haystack, char *needle, char *delim); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); Modified: trunk/flashrom.8 ============================================================================== --- trunk/flashrom.8 Fri Nov 5 15:51:59 2010 (r1225) +++ trunk/flashrom.8 Tue Nov 9 23:00:31 2010 (r1226) @@ -402,7 +402,20 @@ (in Hz). The default is the maximum frequency of 8 MHz. .TP .BR "dediprog " programmer -No parameters defined yet. +An optional +.B voltage +parameter specifies the voltage the Dediprog should use. The default unit is +Volt if no unit is specified. You can use +.BR mV ", " milliVolt ", " V " or " Volt +as unit specifier. Syntax is +.sp +.B "flashrom \-p dediprog:voltage=value" +.sp +where +.B value +can be any of +.BR 0V ", " 1.8V ", " 2.5V ", " 3.5V +or the equivalent in mV. .TP .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Fri Nov 5 15:51:59 2010 (r1225) +++ trunk/flashrom.c Tue Nov 9 23:00:31 2010 (r1226) @@ -29,6 +29,7 @@ #endif #include <string.h> #include <stdlib.h> +#include <ctype.h> #include <getopt.h> #if HAVE_UTSNAME == 1 #include <sys/utsname.h> @@ -615,6 +616,12 @@ return i; } +void tolower_string(char *str) +{ + for (; *str != '\0'; str++) + *str = (char)tolower((unsigned char)*str); +} + char *strcat_realloc(char *dest, const char *src) { dest = realloc(dest, strlen(dest) + strlen(src) + 1);

1 0

[PATCH] Support setting Dediprog SF100 voltage
by Carl-Daniel Hailfinger 09 Nov '10

09 Nov '10

Support setting the Dediprog SF100 SPI voltage. Add a generic voltage parameter parser. Move tolower_string() from dummyflasher.c to flashrom.c to make it available everywhere. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-dediprog_voltage/flash.h =================================================================== --- flashrom-dediprog_voltage/flash.h (Revision 1225) +++ flashrom-dediprog_voltage/flash.h (Arbeitskopie) @@ -197,6 +197,7 @@ int read_flash_to_file(struct flashchip *flash, char *filename); int min(int a, int b); int max(int a, int b); +void tolower_string(char *str); char *extract_param(char **haystack, char *needle, char *delim); int check_erased_range(struct flashchip *flash, int start, int len); int verify_range(struct flashchip *flash, uint8_t *cmpbuf, int start, int len, char *message); Index: flashrom-dediprog_voltage/dummyflasher.c =================================================================== --- flashrom-dediprog_voltage/dummyflasher.c (Revision 1225) +++ flashrom-dediprog_voltage/dummyflasher.c (Arbeitskopie) @@ -19,7 +19,6 @@ #include <string.h> #include <stdlib.h> -#include <ctype.h> #include "flash.h" #include "chipdrivers.h" #include "programmer.h" @@ -61,12 +60,6 @@ static int spi_write_256_chunksize = 256; -static void tolower_string(char *str) -{ - for (; *str != '\0'; str++) - *str = (char)tolower((unsigned char)*str); -} - int dummy_init(void) { char *bustext = NULL; Index: flashrom-dediprog_voltage/dediprog.c =================================================================== --- flashrom-dediprog_voltage/dediprog.c (Revision 1225) +++ flashrom-dediprog_voltage/dediprog.c (Arbeitskopie) @@ -55,34 +55,35 @@ //int usb_control_msg(usb_dev_handle *dev, int requesttype, int request, int value, int index, char *bytes, int size, int timeout); -static int dediprog_set_spi_voltage(uint16_t voltage) +static int dediprog_set_spi_voltage(int millivolt) { int ret; - unsigned int mv; + uint16_t voltage_selector; - switch (voltage) { - case 0x0: + switch (millivolt) { + case 0: /* Admittedly this one is an assumption. */ - mv = 0; + voltage_selector = 0x0; break; - case 0x12: - mv = 1800; + case 1800: + voltage_selector = 0x12; break; - case 0x11: - mv = 2500; + case 2500: + voltage_selector = 0x11; break; - case 0x10: - mv = 3500; + case 3500: + voltage_selector = 0x10; break; default: - msg_perr("Unknown voltage selector 0x%x! Aborting.\n", voltage); + msg_perr("Unknown voltage %i mV! Aborting.\n", millivolt); return 1; } - msg_pdbg("Setting SPI voltage to %u.%03u V\n", mv / 1000, mv % 1000); + msg_pdbg("Setting SPI voltage to %u.%03u V\n", millivolt / 1000, + millivolt % 1000); - ret = usb_control_msg(dediprog_handle, 0x42, 0x9, voltage, 0xff, NULL, 0x0, DEFAULT_TIMEOUT); + ret = usb_control_msg(dediprog_handle, 0x42, 0x9, voltage_selector, 0xff, NULL, 0x0, DEFAULT_TIMEOUT); if (ret != 0x0) { - msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage); + msg_perr("Command Set SPI Voltage 0x%x failed!\n", voltage_selector); return 1; } return 0; @@ -279,13 +280,74 @@ } #endif +static int parse_voltage(char *voltage) +{ + char *tmp = NULL; + int i; + int millivolt; + int fraction = 0; + + if (!voltage || !strlen(voltage)) { + msg_perr("Empty voltage= specified.\n"); + return -1; + } + millivolt = (int)strtol(voltage, &tmp, 0); + voltage = tmp; + /* Handle "," and "." as decimal point. Everything after it is assumed + * to be in decimal notation. + */ + if ((*voltage == '.') || (*voltage == ',')) { + voltage++; + for (i = 0; i < 3; i++) { + fraction *= 10; + /* Don't advance if the current character is invalid, + * but continue multiplying. + */ + if ((*voltage < '0') || (*voltage > '9')) + continue; + fraction += *voltage - '0'; + voltage++; + } + /* Throw away remaining digits. */ + voltage += strspn(voltage, "0123456789"); + } + /* The remaining string must be empty or "mV" or "V". */ + tolower_string(voltage); + + /* No unit or "V". */ + if ((*voltage == '\0') || !strncmp(voltage, "v", 1)) { + millivolt *= 1000; + millivolt += fraction; + } else if (!strncmp(voltage, "mv", 2) || + !strncmp(voltage, "milliv", 6)) { + /* No adjustment. fraction is discarded. */ + } else { + /* Garbage at the end of the string. */ + msg_perr("Garbage voltage= specified.\n"); + return -1; + } + return millivolt; +} + /* URB numbers refer to the first log ever captured. */ int dediprog_init(void) { struct usb_device *dev; + char *voltage; + int millivolt = 3500; msg_pspew("%s\n", __func__); + voltage = extract_programmer_param("voltage"); + if (voltage) { + millivolt = parse_voltage(voltage); + free(voltage); + if (millivolt < 0) { + return 1; + } + msg_pinfo("Setting voltage to %i mV\n", millivolt); + } + /* Here comes the USB stuff. */ usb_init(); usb_find_busses(); @@ -315,7 +377,7 @@ if (dediprog_command_c()) return 1; /* URB 11. Command Set SPI Voltage. */ - if (dediprog_set_spi_voltage(0x10)) + if (dediprog_set_spi_voltage(millivolt)) return 1; buses_supported = CHIP_BUSTYPE_SPI; Index: flashrom-dediprog_voltage/flashrom.8 =================================================================== --- flashrom-dediprog_voltage/flashrom.8 (Revision 1225) +++ flashrom-dediprog_voltage/flashrom.8 (Arbeitskopie) @@ -402,7 +402,20 @@ (in Hz). The default is the maximum frequency of 8 MHz. .TP .BR "dediprog " programmer -No parameters defined yet. +An optional +.B voltage +parameter specifies the voltage the Dediprog should use. The default unit is +Volt if no unit is specified. You can use +.BR mV ", " milliVolt ", " V " or " Volt +as unit specifier. Syntax is +.sp +.B "flashrom \-p dediprog:voltage=value" +.sp +where +.B value +can be any of +.BR 0V ", " 1.8V ", " 2.5V ", " 3.5V +or the equivalent in mV. .TP .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use Index: flashrom-dediprog_voltage/flashrom.c =================================================================== --- flashrom-dediprog_voltage/flashrom.c (Revision 1225) +++ flashrom-dediprog_voltage/flashrom.c (Arbeitskopie) @@ -29,6 +29,7 @@ #endif #include <string.h> #include <stdlib.h> +#include <ctype.h> #include <getopt.h> #if HAVE_UTSNAME == 1 #include <sys/utsname.h> @@ -615,6 +616,12 @@ return i; } +void tolower_string(char *str) +{ + for (; *str != '\0'; str++) + *str = (char)tolower((unsigned char)*str); +} + char *strcat_realloc(char *dest, const char *src) { dest = realloc(dest, strlen(dest) + strlen(src) + 1); -- http://www.hailfinger.org/

2 2

flashrom -V output for foxconn nt330i intel atom nvidia ion nettop
by Todd Speir 09 Nov '10

09 Nov '10

# flashrom -V flashrom v0.9.2-r1075 on Linux 2.6.34-sabayon (x86_64), built with libpci 3.1.7, GCC 4.4.2, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 395M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1023 us, 10000 myus = 10030 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Foxconn" DMI string system-product-name: "nT-330i" DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "To be filled by O.E.M." DMI string baseboard-product-name: "To be filled by O.E.M." DMI string baseboard-version: "To be filled by O.E.M." DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP79", enabling flash write... chipset PCI ID is 10de:0aad, This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Guessed flash bus type is LPC Found SMBus device 10de:0aa2 at 00:03:2 SPI BAR is at 0xfae80000, after clearing low bits BAR is at 0xfae80000 Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled. Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. LPC on this chipset is not supported yet. OK. This chipset supports the following protocols: LPC. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: skipped. Probing for Atmel AT25DF041A, 512 KB: skipped. Probing for Atmel AT25DF081, 1024 KB: skipped. Probing for Atmel AT25DF161, 2048 KB: skipped. Probing for Atmel AT25DF321, 4096 KB: skipped. Probing for Atmel AT25DF321A, 4096 KB: skipped. Probing for Atmel AT25DF641, 8192 KB: skipped. Probing for Atmel AT25F512B, 64 KB: skipped. Probing for Atmel AT25FS010, 128 KB: skipped. Probing for Atmel AT25FS040, 512 KB: skipped. Probing for Atmel AT26DF041, 512 KB: skipped. Probing for Atmel AT26DF081A, 1024 KB: skipped. Probing for Atmel AT26DF161, 2048 KB: skipped. Probing for Atmel AT26DF161A, 2048 KB: skipped. Probing for Atmel AT26F004, 512 KB: skipped. Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: skipped. Probing for Atmel AT45DB011D, 128 KB: skipped. Probing for Atmel AT45DB021D, 256 KB: skipped. Probing for Atmel AT45DB041D, 512 KB: skipped. Probing for Atmel AT45DB081D, 1024 KB: skipped. Probing for Atmel AT45DB161D, 2048 KB: skipped. Probing for Atmel AT45DB321C, 4224 KB: skipped. Probing for Atmel AT45DB321D, 4096 KB: skipped. Probing for Atmel AT45DB642D, 8192 KB: skipped. Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F020, 256 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: skipped. Probing for AMIC A25L40PU, 512 KB: skipped. Probing for AMIC A25L80P, 1024 KB: skipped. Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for EMST F49B002UA, 256 KB: skipped. Probing for EMST F25L008A, 1024 KB: skipped. Probing for Eon EN25B05, 64 KB: skipped. Probing for Eon EN25B05T, 64 KB: skipped. Probing for Eon EN25B10, 128 KB: skipped. Probing for Eon EN25B10T, 128 KB: skipped. Probing for Eon EN25B20, 256 KB: skipped. Probing for Eon EN25B20T, 256 KB: skipped. Probing for Eon EN25B40, 512 KB: skipped. Probing for Eon EN25B40T, 512 KB: skipped. Probing for Eon EN25B80, 1024 KB: skipped. Probing for Eon EN25B80T, 1024 KB: skipped. Probing for Eon EN25B16, 2048 KB: skipped. Probing for Eon EN25B16T, 2048 KB: skipped. Probing for Eon EN25B32, 4096 KB: skipped. Probing for Eon EN25B32T, 4096 KB: skipped. Probing for Eon EN25B64, 8192 KB: skipped. Probing for Eon EN25B64T, 8192 KB: skipped. Probing for Eon EN25D16, 2048 KB: skipped. Probing for Eon EN25F05, 64 KB: skipped. Probing for Eon EN25F10, 128 KB: skipped. Probing for Eon EN25F20, 256 KB: skipped. Probing for Eon EN25F40, 512 KB: skipped. Probing for Eon EN25F80, 1024 KB: skipped. Probing for Eon EN25F16, 2048 KB: skipped. Probing for Eon EN25F32, 4096 KB: skipped. Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Hyundai HY29F002T, 256 KB: skipped. Probing for Hyundai HY29F002B, 256 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: skipped. Probing for Intel 82802AC, 1024 KB: skipped. Probing for Macronix MX25L512, 64 KB: skipped. Probing for Macronix MX25L1005, 128 KB: skipped. Probing for Macronix MX25L2005, 256 KB: skipped. Probing for Macronix MX25L4005, 512 KB: skipped. Probing for Macronix MX25L8005, 1024 KB: skipped. Probing for Macronix MX25L1605, 2048 KB: skipped. Probing for Macronix MX25L1635D, 2048 KB: skipped. Probing for Macronix MX25L3205, 4096 KB: skipped. Probing for Macronix MX25L3235D, 4096 KB: skipped. Probing for Macronix MX25L6405, 8192 KB: skipped. Probing for Macronix MX25L12805, 16384 KB: skipped. Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: skipped. Probing for Numonyx M25PE20, 256 KB: skipped. Probing for Numonyx M25PE40, 512 KB: skipped. Probing for Numonyx M25PE80, 1024 KB: skipped. Probing for Numonyx M25PE16, 2048 KB: skipped. Probing for PMC Pm25LV010, 128 KB: skipped. Probing for PMC Pm25LV016B, 2048 KB: skipped. Probing for PMC Pm25LV020, 256 KB: skipped. Probing for PMC Pm25LV040, 512 KB: skipped. Probing for PMC Pm25LV080B, 1024 KB: skipped. Probing for PMC Pm25LV512, 64 KB: skipped. Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: skipped. Probing for Sharp LHF00L04, 1024 KB: skipped. Probing for Spansion S25FL008A, 1024 KB: skipped. Probing for Spansion S25FL016A, 2048 KB: skipped. Probing for SST SST25VF016B, 2048 KB: skipped. Probing for SST SST25VF032B, 4096 KB: skipped. Probing for SST SST25VF040.REMS, 512 KB: skipped. Probing for SST SST25VF040B, 512 KB: skipped. Probing for SST SST25LF040A.RES, 512 KB: skipped. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Probing for SST SST25VF080B, 1024 KB: skipped. Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: skipped. Probing for SST SST49LF003A/B, 384 KB: skipped. Probing for SST SST49LF004A/B, 512 KB: skipped. Probing for SST SST49LF004C, 512 KB: skipped. Probing for SST SST49LF008A, 1024 KB: skipped. Probing for SST SST49LF008C, 1024 KB: skipped. Probing for SST SST49LF016C, 2048 KB: skipped. Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M25P05-A, 64 KB: skipped. Probing for ST M25P05.RES, 64 KB: skipped. Probing for ST M25P10-A, 128 KB: skipped. Probing for ST M25P10.RES, 128 KB: skipped. Probing for ST M25P20, 256 KB: skipped. Probing for ST M25P40, 512 KB: skipped. Probing for ST M25P40-old, 512 KB: skipped. Probing for ST M25P80, 1024 KB: skipped. Probing for ST M25P16, 2048 KB: skipped. Probing for ST M25P32, 4096 KB: skipped. Probing for ST M25P64, 8192 KB: skipped. Probing for ST M25P128, 16384 KB: skipped. Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x7f, id2 0xfc, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x7f, id2 0xfc, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: skipped. Probing for ST M50FW016, 2048 KB: skipped. Probing for ST M50FW040, 512 KB: skipped. Probing for ST M50FW080, 1024 KB: skipped. Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: skipped. Probing for Winbond W25Q16, 2048 KB: skipped. Probing for Winbond W25Q32, 4096 KB: skipped. Probing for Winbond W25Q64, 8192 KB: skipped. Probing for Winbond W25x10, 128 KB: skipped. Probing for Winbond W25x20, 256 KB: skipped. Probing for Winbond W25x40, 512 KB: skipped. Probing for Winbond W25x80, 1024 KB: skipped. Probing for Winbond W25x16, 2048 KB: skipped. Probing for Winbond W25x32, 4096 KB: skipped. Probing for Winbond W25x64, 8192 KB: skipped. Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x7f03, id2 0xfc, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 KB: skipped. Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x31, id2 0x9e, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 KB: skipped. Probing for Winbond W39V080FA, 1024 KB: skipped. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Probing for EON unknown EON SPI chip, 0 KB: skipped. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Probing for SST unknown SST SPI chip, 0 KB: skipped. Probing for ST unknown ST SPI chip, 0 KB: skipped. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.

1 0

VX6060 a VPX Kontron Modular Computers SA Board
by Régis Odeyé 09 Nov '10

09 Nov '10

Our VX6060 board is fitted with an IbexPeak (Intel QM57) and a SST SST25VF032B SPI flash for the BIOS. It seems that this flash needs some test report: The read/write/erase functions of the flashrom v0.9.3-r1225 are working properly. Good job. Attached the output of the verbose commands. Régis Odeyé Software Program Leader | *Kontron* | +33 498 163 486 | regis.odeye(a)kontron.com <mailto:vincent.chuffart@kontron.com> | /www.kontron.com <http://www.kontron.com/>/

1 0

[PATCH] pciutils Mac OS X support
by Carl-Daniel Hailfinger 08 Nov '10

08 Nov '10

Hi Martin, Stefan Reinauer created a port of pciutils to Mac OS X. I am just forwarding the patch. Please merge it if possible. You can also find the patch at http://www.coresystems.de/~stepan/pciutils-3.1.4.diff Regards, Carl-Daniel Index: pciutils-3.1.4/lib/configure =================================================================== --- pciutils-3.1.4/lib/configure +++ pciutils-3.1.4/lib/configure @@ -8,9 +8,9 @@ echo_n() { if [ -n "$BASH" ] then - echo -n "$*" + /bin/echo -n "$*" else - echo "$*\c" + /bin/echo "$*\c" fi } @@ -124,6 +124,12 @@ echo >>$c '#define PCI_HAVE_PM_INTEL_CONF' echo >>$m 'WITH_LIBS+=-lioperm' ;; + darwin) + echo_n " i386-ports" + echo >>$c '#define PCI_HAVE_PM_INTEL_CONF' + echo >>$c '#define PCI_HAVE_64BIT_ADDRESS' + echo >>$m 'WITH_LIBS+=-framework DirectIO' + ;; *) echo " Unfortunately, your OS is not supported by the PCI Library" exit 1 Index: pciutils-3.1.4/lib/i386-io-darwin.h =================================================================== --- pciutils-3.1.4/lib/i386-io-darwin.h +++ pciutils-3.1.4/lib/i386-io-darwin.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <DirectIO/darwinio.h> + +/* Compatibility for libpci */ +static int intel_setup_io(struct pci_access *a __attribute__((unused))) +{ + return !iopl(0); +} + +static int intel_cleanup_io(struct pci_access *a __attribute__((unused))) +{ + return 1; +} + Index: pciutils-3.1.4/lib/i386-ports.c =================================================================== --- pciutils-3.1.4/lib/i386-ports.c +++ pciutils-3.1.4/lib/i386-ports.c @@ -22,6 +22,8 @@ #include "i386-io-windows.h" #elif defined(PCI_OS_CYGWIN) #include "i386-io-cygwin.h" +#elif defined(PCI_OS_DARWIN) +#include "i386-io-darwin.h" #else #error Do not know how to access I/O ports on this OS. #endif Index: pciutils-3.1.4/osx/Welcome.rtf =================================================================== --- pciutils-3.1.4/osx/Welcome.rtf +++ pciutils-3.1.4/osx/Welcome.rtf @@ -0,0 +1,20 @@ +{\rtf1\ansi\ansicpg1252\cocoartf949\cocoasubrtf540 +{\fonttbl\f0\fnil\fcharset0 LucidaGrande;} +{\colortbl;\red255\green255\blue255;\red128\green128\blue128;} +\paperw11900\paperh16840\margl1440\margr1440\vieww9000\viewh8400\viewkind0 +\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural\pardirnatural + +\f0\b\fs26 \cf2 Welcome to PCI Utilities\ +\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\sl120\slmult1\ql\qnatural\pardirnatural + +\b0 \cf2 \ +\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\ql\qnatural\pardirnatural +\cf2 This package contains the PCI Utilities, version 3.1.4.\ +\ +Copyright (c) 1997--2009 Martin Mares <mj(a)ucw.cz>\ +\ +The PCI Utilities package contains a library for portable access to PCI bus configuration registers and several utilities based on this library.\ +\ +You also might want to look at the pciutils web page containing release notes and other news: http://mj.ucw.cz/pciutils.shtml .\ +\ +You will now be guided through the steps necessary to install this software.} \ No newline at end of file Index: pciutils-3.1.4/osx/pciutils.pmdoc/01root.xml =================================================================== --- pciutils-3.1.4/osx/pciutils.pmdoc/01root.xml +++ pciutils-3.1.4/osx/pciutils.pmdoc/01root.xml @@ -0,0 +1,24 @@ +<pkgref spec="1.12" uuid="94522C23-7BEF-4761-8AA3-4FE2E2784DB7"> + <config> + <identifier>com.pciutils.root.pkg</identifier> + <version>1</version> + <description></description> + <post-install type="none"/> + <requireAuthorization/> + <installFrom relative="true" mod="true">../root/</installFrom> + <flags> + <followSymbolicLinks/> + </flags> + <packageStore type="internal"></packageStore> + <mod>parent</mod> + <mod>installFrom.path</mod> + <mod>identifier</mod> + </config> + <contents> + <filter>/CVS$</filter> + <filter>/\.svn$</filter> + <filter>/\.cvsignore$</filter> + <filter>/\.cvspass$</filter> + <filter>/\.DS_Store$</filter> + </contents> +</pkgref> Index: pciutils-3.1.4/osx/pciutils.pmdoc/index.xml =================================================================== --- pciutils-3.1.4/osx/pciutils.pmdoc/index.xml +++ pciutils-3.1.4/osx/pciutils.pmdoc/index.xml @@ -0,0 +1,53 @@ +<pkmkdoc spec="1.12"> + <properties> + <title>PCI Utilities</title> + <build>pciutils.pkg</build> + <organization>com.pciutils</organization> + <userSees ui="easy"/> + <min-target os="2"/> + <domain system="true"/> + </properties> + <distribution> + <versions min-spec="1.000000"/><scripts> + function CheckHardwareCompatibility() { + if (system.sysctl('hw.machine') == 'i386') { + return true; + } + + if (system.sysctl('hw.machine') == 'x86_64') { + return true; + } + + return false; + } + </scripts> + </distribution> + <description>The PCI Utilities package contains a library for portable access to PCI bus configuration registers and several utilities based on this library. + </description> + <contents> + <choice title="PCI Utilities" id="choice0" starts_selected="true" starts_enabled="true" starts_hidden="false"> + <pkgref id="com.pciutils.root.pkg"/> + </choice> + </contents> + <resources bg-scale="none" bg-align="bottomleft"> + <locale lang="en"> + <resource relative="true" mod="true" type="license">../COPYING</resource> + <resource relative="true" mod="true" type="welcome">Welcome.rtf</resource> + </locale> + </resources> + <requirements> + <requirement id="java" operator="eq" value="true"> + <argument>CheckHardwareCompatibility()</argument> + <message-title>Unsupported Architecture</message-title> + <message>PCI utilities are only supported on IntelÂ® based Apple systems.</message> + </requirement> + </requirements> + <flags/> + <item type="file">01root.xml</item> + <mod>properties.userDomain</mod> + <mod>properties.systemDomain</mod> + <mod>properties.anywhereDomain</mod> + <mod>properties.title</mod> + <mod>description</mod> + <mod>postinstallActions.actions</mod> +</pkmkdoc>

2 1

flashrom -V
by frederic ba 08 Nov '10

08 Nov '10

flashrom v0.9.1-r946 No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "N68-S" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:03eb at 00:01:1 SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 Mapping MCP67 SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x000a, enable=0, idle=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org to help us finish support for your chipset. Thanks. SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. Calibrating delay loop... 583M loops per second, 100 myus = 196 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ASD AE49F2008, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT29C020, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A29002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A29040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for EMST F49B002UA, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Eon EN25B05, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B05T, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B10T, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B20T, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B40T, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Eon EN29F010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 28F004S5, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Intel 82802AB, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Intel 82802AC, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Macronix MX25L512, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for PMC Pm49FL002, 256 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for PMC Pm49FL004, 512 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Sharp LHF00L04, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29EE010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29LE010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29EE020A, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST29LE020, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF010A, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF020A, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39SF040, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF512, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF010, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF020, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF040, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST39VF080, 1024 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SST SST49LF002A/B, 256 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF003A/B, 384 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF004A/B, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF004C, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF008A, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF008C, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF016C, 2048 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for SST SST49LF020, 256 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF020A, 256 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF040, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF040B, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for ST M25P05-A, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29F040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29F400BT, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29W010B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29W040B, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M29W512B, 64 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for ST M50FLW040A, 512 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW040B, 512 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080A, 1024 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FLW080B, 1024 KB: skipped. Host bus type None and chip bus type LPC,FWH are incompatible. Probing for ST M50FW002, 256 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50FW016, 2048 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50FW040, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50FW080, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for ST M50LPW116, 2048 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W25x10, 128 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x32, 4096 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W25x64, 8192 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W29C020C, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W29C040P, 512 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W29EE011, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W39V040A, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W39V040B, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W39V040C, 512 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W39V040FA, 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W49F002U, 256 KB: skipped. Host bus type None and chip bus type Parallel are incompatible. Probing for Winbond W49V002A, 256 KB: skipped. Host bus type None and chip bus type LPC are incompatible. Probing for Winbond W49V002FA, 256 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Winbond W39V080FA, 1024 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Winbond W39V080FA (dual mode), 512 KB: skipped. Host bus type None and chip bus type FWH are incompatible. Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type None and chip bus type SPI are incompatible. No EEPROM/flash device found. If you know which flash chip you have, and if this version of flashrom supports a similar flash chip, you can try to force read your chip. Run: flashrom -f -r -c similar_supported_flash_chip filename Note: flashrom can never write when the flash chip isn't found automatically.

2 1

← Newer
1
...
9
10
11
12
13
14
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom November 2010