flashrom December 2009

flashrom@flashrom.org

56 participants
195 discussions

[commit] r809 - trunk
by svn＠flashrom.org 21 Dec '09

21 Dec '09

Author: libv Date: 2009-12-21 16:30:46 +0100 (Mon, 21 Dec 2009) New Revision: 809 Modified: trunk/chipset_enable.c Log: Chipset: Add support for Intel Poulsbo chipset. Signed-off-by: Adam Jurkowski <adam.jurkowski(a)kontron.pl> Acked-by: Luc Verhaegen <libv(a)skynet.be> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-12-18 08:37:55 UTC (rev 808) +++ trunk/chipset_enable.c 2009-12-21 15:30:46 UTC (rev 809) @@ -5,6 +5,7 @@ * Copyright (C) 2005-2009 coresystems GmbH * Copyright (C) 2006 Uwe Hermann <uwe(a)hermann-uwe.de> * Copyright (C) 2007,2008,2009 Carl-Daniel Hailfinger + * Copyright (C) 2009 Kontron Modular Computers GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -391,6 +392,26 @@ return enable_flash_ich(dev, name, 0xdc); } +static int enable_flash_poulsbo(struct pci_dev *dev, const char *name) +{ + uint16_t old, new; + int err; + + if ((err = enable_flash_ich(dev, name, 0xd8)) != 0) + return err; + + old = pci_read_byte(dev, 0xd9); + printf_debug("BIOS Prefetch Enable: %sabled, ", + (old & 1) ? "en" : "dis"); + new = old & ~1; + + if (new != old) + pci_write_byte(dev, 0xd9, new); + + return 0; +} + + #define ICH_STRAP_RSVD 0x00 #define ICH_STRAP_SPI 0x01 #define ICH_STRAP_PCI 0x02 @@ -1155,6 +1176,7 @@ {0x8086, 0x7000, OK, "Intel", "PIIX3", enable_flash_piix4}, {0x8086, 0x7110, OK, "Intel", "PIIX4/4E/4M", enable_flash_piix4}, {0x8086, 0x122e, OK, "Intel", "PIIX", enable_flash_piix4}, + {0x8086, 0x8119, OK, "Intel", "Poulsbo", enable_flash_poulsbo}, {0x10de, 0x0030, OK, "NVIDIA", "nForce4/MCP4", enable_flash_nvidia_nforce2}, {0x10de, 0x0050, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* LPC */ {0x10de, 0x0051, OK, "NVIDIA", "CK804", enable_flash_ck804}, /* Pro */

1 0

Fail to flash BIOS under ICH9R with descriptor mode
by eugenehsu 21 Dec '09

21 Dec '09

Hi I used the flashrom with SB ICH9R and flash chip SST SST25VF016B, and the descriptor mode is activated. The software version is flashrom-0.9.1 and pciutils-3.1.4. I failed to flash the BIOS. Please refer to the messages: =========================== DiskStation> ./flashrom -E flashrom v0.9.1-r710 No coreboot table found. Found chipset "Intel ICH9R", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address 0xffe00000. Erasing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x001fffff: 0x3000 ERASE FAILED! FAILED! ERROR at 0x00000000: Expected=0xff, Read=0x00 Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail flashrom(a)flashrom.org ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! =========================== BTW, please find the "flashrom -E -V" messages in the attachment. Do you know how to solve this problem ? Thanks for your help. Eugene

2 1

[PATCH] Board: Add Gigabyte M51GM.
by Luc Verhaegen 21 Dec '09

21 Dec '09

The board ids match the M55Plus, but guess what, they require the same board enable ;) Signed-off-by: Luc Verhaegen <libv(a)skynet.be> --- board_enable.c | 16 +++++++++++++--- 1 files changed, 13 insertions(+), 3 deletions(-) diff --git a/board_enable.c b/board_enable.c index 8b5ed95..91d27ac 100644 --- a/board_enable.c +++ b/board_enable.c @@ -445,11 +445,12 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) return -1; } - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); + dev = pci_dev_find_vendorclass(0x10DE, 0x0601); switch (dev->device_id) { - case 0x0030: /* CK804 */ - case 0x0050: /* MCP04 */ + case 0x0030: /* MCP04 */ + case 0x0050: /* CK804 */ case 0x0060: /* MCP2 */ + case 0x0260: /* MCP51 */ break; default: fprintf(stderr, "\nERROR: no nVidia SMBus controller found.\n"); @@ -494,6 +495,14 @@ static int nvidia_mcp_gpio31_raise(const char *name) } /** + * Suited for Gigabyte GA-M51GM-S2G: nVidia MCP51. + */ +static int nvidia_mcp_gpio3B_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x3B, 0x01); +} + +/** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) @@ -1251,6 +1260,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1039, 0x0761, 0, 0, 0x10EC, 0x8168, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash}, {0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", it8705_rom_write_enable}, {0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", nvidia_mcp_gpio21_raise}, + {0x10DE, 0x02FA, 0x1458, 0x5000, 0x10DE, 0x0260, 0x1458, 0x5001, NULL, NULL, "GIGABYTE", "GA-M51GM/M55plus", nvidia_mcp_gpio3B_raise}, {0x10DE, 0x0360, 0x1458, 0x0C11, 0x10DE, 0x0369, 0x1458, 0x5001, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash}, {0x10de, 0x03e0, 0, 0, 0x10DE, 0x03D0, 0, 0, NULL, NULL, "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash}, {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash}, -- 1.6.0.2 --AhhlLboLdkugWU4S--

1 0

Re: [flashrom] Scary error message
by Luc Verhaegen 21 Dec '09

21 Dec '09

On Sun, Dec 20, 2009 at 05:01:38PM -0800, Fraser Hanson wrote: > OK, tonight I checked out the latest flashrom from svn, patched it and > compiled it. > > I then tried to flash my bios with my original bios. > > The flash failed, as follows: > > fraser@ged:~/bios/flashrom$ sudo ./flashrom -w ../stock-bios.bin > flashrom v0.9.1-r808 > No coreboot table found. > Found chipset "NVIDIA CK804", enabling flash write... OK. > This chipset supports the following protocols: Non-SPI. > Disabling flash write protection for board "MSI K8N Neo4-F"... > ERROR: no nVidia SMBus controller found. > FAILED! > Calibrating delay loop... OK. > Found chip "PMC Pm49FL004" (512 KB, LPC,FWH) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Programming page: ERASE FAILED at 0x00000000! > Expected=0xff, Read=0x49, failed byte count from > 0x00000000-0x0000ffff: 0x599 > ERASE FAILED! > ERASE FAILED! > FAILED! > Your flash chip is in an unknown state. > Get help on IRC at irc.freenode.net (channel #flashrom) or > mail flashrom(a)flashrom.org! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! Ah, urgh, nvidia mcp gpio code is busted. Here is an updated patch. Luc Verhaegen.

1 0

[PATCH] Board: Add MSI K8N Neo4.
by Luc Verhaegen 21 Dec '09

21 Dec '09

Fix up nvidia_mcp_gpio_set while we are at it. Signed-off-by: Luc Verhaegen <libv(a)skynet.be> --- board_enable.c | 15 ++++++++++++--- 1 files changed, 12 insertions(+), 3 deletions(-) diff --git a/board_enable.c b/board_enable.c index 8b5ed95..fa71818 100644 --- a/board_enable.c +++ b/board_enable.c @@ -445,10 +445,10 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) return -1; } - dev = pci_dev_find_vendorclass(0x10DE, 0x0C05); + dev = pci_dev_find_vendorclass(0x10DE, 0x0601); switch (dev->device_id) { - case 0x0030: /* CK804 */ - case 0x0050: /* MCP04 */ + case 0x0030: /* MCP04 */ + case 0x0050: /* CK804 */ case 0x0060: /* MCP2 */ break; default: @@ -470,6 +470,14 @@ static int nvidia_mcp_gpio_set(int gpio, int raise) } /** + * Suited for MSI K8N Neo4: nVidia CK804. + */ +static int nvidia_mcp_gpio2_raise(const char *name) +{ + return nvidia_mcp_gpio_set(0x02, 1); +} + +/** * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. */ static int nvidia_mcp_gpio10_raise(const char *name) @@ -1267,6 +1275,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, "MSI", "MS-6712 (KT4V)", board_msi_kt4v}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", intel_ich_gpio19_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e}, + {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, "MSI", "K8N Neo4-F", nvidia_mcp_gpio2_raise}, {0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, "shuttle", "ak31", "Shuttle", "AK31", w836xx_memw_enable_2e}, {0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, "Shuttle", "AK38N", shuttle_ak38n}, {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, "Shuttle", "FN25", board_shuttle_fn25}, -- 1.6.0.2 --DocE+STaALJfprDB--

1 0

ASUS P4P800 SE
by Charles M 20 Dec '09

20 Dec '09

The ASUS P4P800 motherboard has a few variations - I've seen a few of these LGA755 boards come in (for repair - yikes), is the P4P800 SE variant. I have the physical paper manual and access to the motherboard. Cheers, Charles

1 0

Foxconn 946GZ7MA-KS2H (LGA775)
by Charles M 20 Dec '09

20 Dec '09

This motherboard actually resides in our home multimedia centre, it's not a great board, but it gets us by with the ATI video card we have in it. You can find the Foxconn specs at: http://www.foxconnchannel.com/product/Motherboards/detail_overview.aspx?ID=… Cheers, Charles p.s. Someone please tell me to stop if it's too much.

1 0

P2-BX (NOT ASUS)
by Charles M 20 Dec '09

20 Dec '09

The following motherboard is marked P2-BX but is NOT an ASUS motherboard despite a similar naming scheme. The board came into work with the paper motherboard manual (not at work at the moment). The manual is a very plain looking manual, not like Asus' typical documentation. Someone has incorrectly listed the P2-BX as an Asus motherboard on a couple of sites, but I can guarantee after looking closely at the board it's not. If I remember correctly it is a Slot 1 motherboard. Cheers, Charles

1 0

Intel D845GEBV2
by Charles M 20 Dec '09

20 Dec '09

The Intel D845GEBV2 motherboard is one we see every once in a while. Intel currently maintains documentation on this board here: http://www.intel.com/support/motherboards/desktop/D845GEBV2/ Charles

1 0

ASUSTEK CUSI-FX
by Charles M 20 Dec '09

20 Dec '09

We get quite a few ASUS motherboards, but the ASUSTEK CUSI-FX is one of the more interesting boards that we've come across lately. It's a Socket 370 motherboard (PIII). Asus has all motherboards available under the support section of their site. It's dynamically generated so you'll have to select MOTHERBOARDS > Socket 370 then CUSI-FX from: http://support.asus.com/download/download.aspx?SLanguage=en-us Regards, Charles

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
20
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom December 2009