Re: [flashrom] Rayer_SPI and xilinx buffered dlc5 cable

March 4, 2013
11:28 p.m.
On Tue, 2013-02-26 at 11:55 +1100, Andrew Tarabaras wrote:
Hi,
Just a heads up that the rayer_spi module wont work with a buffered xilinx DLC cable. There is a pull down buffer in the MISO ( Data In ) line which is enabled when pin 6 of the parallel port is pulled low.
I dont have time to be submitting patches, fix it or not I dont mind.
Thanks. So this is for the "Xilinx DLC-5" with following schematic? http://dev.ivanov.eu/uploads/images/dlc5/dlc5_schematic3.png There is another pending rayer_spi patch, I'll handle both. Regards, Kyösti
4491
Age (days ago)
4491
Last active (days ago)
0 comments
1 participants
participants (1)
-
Kyösti Mälkki