Dediprog support stable?

[David Woodhouse]

Makefile says:

# Disable Dediprog SF100 until support is complete and tested.
CONFIG_DEDIPROG ?= no

Any chance of fixing that? Is it still true, and if so what else needs
to be done? It works nicely here and having it enabled by default would
be good because I could then use the distribution packages instead of
having to build my own...

[Stefan Tauner]

On Tue, 10 Dec 2013 12:29:25 +0000
David Woodhouse  wrote:
> Makefile says:
>
> # Disable Dediprog SF100 until support is complete and tested.
> CONFIG_DEDIPROG ?= no
>
> Any chance of fixing that? Is it still true, and if so what else needs
> to be done? It works nicely here and having it enabled by default would
> be good because I could then use the distribution packages instead of
> having to build my own...

Please refer to the following mail etc.
http://www.flashrom.org/pipermail/flashrom/2013-June/011074.html

W836xx : HPZ800 : flashrom -V

[Roberto]

Stefan,

Thank you for the help (IRC) this past Sunday with flashrom and my Z820. You 
had to drop off the channel before I sent message that the Z820 had not 
bricked. It rebooted and all is fine.

I posted the flashrom -o file hoping some bright minds (brighter than mine) 
have some suggestions. I am in the US on Pacific time zone so it is 
difficult to meet up in IRC due to time differential.

Any ideas appreciated.

Roberto Denis

(Salsimp in IRC)