WD29C020C erase success (was UNTESTED)

[Urja Rannikko]

Hi,

WD29C020C's erase still works ;)

To note that i disabled udelay.c's recalibration stuff for now (see the
timings in the log, weird...) - I only use the serprog driver (that
implements delays on the programmer device) on this machine so not a real
problem for me but mysterious.

command line used was:
./flashrom -p serprog:/dev/ttyUSB0:1500000 -EV > erase_wd29c020c.log

Programmer device used was my self built ATMega644 USB programmer with
self-written firmware implementing the serprog protocol.

-- 
urjaman

[Uwe Hermann]

Hi,

On Sat, Apr 03, 2010 at 01:44:25AM +0300, Urja Rannikko wrote:
> WD29C020C's erase still works ;)

Thanks, chip status updated in r1019.


Uwe.
-- 
http://hermann-uwe.de     | http://sigrok.org
http://randomprojects.org | http://unmaintained-free-software.org