On Thu, 29 Dec 2011 12:09:42 +0530 Raghuramchary Jallipalli Raghuramchary.Jallipalli@lntinfotech.com wrote:
Hello Experts, I have tried installing the flashrom-0.9.4 in my laptop having Ubuntu 9.10. The flashchip is AT25DF321A and the chipset is QM67. When I tried to execute the flashrom utility I got the below output: #########################
root@ubuntu:~#
root@ubuntu:~# flashrom
flashrom v0.9.4-r1395 on Linux 2.6.31-14-generic (i686), built with libpci 3.0.0, GCC 4.4.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
========================================================================
WARNING! You seem to be running flashrom on an unsupported laptop.
Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See http://www.flashrom.org/Laptops for details.
If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff.
You have been warned.
========================================================================
Aborting.
root@ubuntu:~#
root@ubuntu:~# ###########################
Can anyone please help on how to proceed further?
Hello Raghu!
The answer to your question can be found in the manpage of flashrom. The warning is set up for a reason (explained in the warning itself, the linked webpage and also in the manpage). If you understand and accept the possible consequences go ahead with the procedure in the manpage.
Most probably it will not work even then, because the QM67 chipset can is probably locked down, which we can not unlock yet. We could verify that with a verbose log (after following the manpage). It would also be interesting to know which laptop that is (then).
This procedure is not to annoy you, but to ensure that users do not take the warning lightly and look at it more closely.
Thanks for the reply Stefan.
Thanks, Raghu
-----Original Message----- From: Stefan Tauner [mailto:stefan.tauner@student.tuwien.ac.at] Sent: Thursday, December 29, 2011 5:51 PM To: Raghuramchary Jallipalli Cc: flashrom@flashrom.org Subject: Re: [flashrom] Help: unable to upgrade bios
On Thu, 29 Dec 2011 12:09:42 +0530 Raghuramchary Jallipalli Raghuramchary.Jallipalli@lntinfotech.com wrote:
Hello Experts, I have tried installing the flashrom-0.9.4 in my laptop having Ubuntu 9.10. The flashchip is AT25DF321A and the chipset is QM67. When I tried to execute the flashrom utility I got the below output: #########################
root@ubuntu:~#
root@ubuntu:~# flashrom
flashrom v0.9.4-r1395 on Linux 2.6.31-14-generic (i686), built with libpci 3.0.0, GCC 4.4.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
========================================================================
WARNING! You seem to be running flashrom on an unsupported laptop.
Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See http://www.flashrom.org/Laptops for details.
If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff.
You have been warned.
========================================================================
Aborting.
root@ubuntu:~#
root@ubuntu:~# ###########################
Can anyone please help on how to proceed further?
Hello Raghu!
The answer to your question can be found in the manpage of flashrom. The warning is set up for a reason (explained in the warning itself, the linked webpage and also in the manpage). If you understand and accept the possible consequences go ahead with the procedure in the manpage.
Most probably it will not work even then, because the QM67 chipset can is probably locked down, which we can not unlock yet. We could verify that with a verbose log (after following the manpage). It would also be interesting to know which laptop that is (then).
This procedure is not to annoy you, but to ensure that users do not take the warning lightly and look at it more closely.
-- Kind regards/Mit freundlichen Gren, Stefan Tauner
The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. L&T Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail" ************************************************************************* This email and attachments have been scanned for potential proprietary or sensitive information leakage. Websense Data Security, Protecting Your Information from the Inside Out. www.websense.com *************************************************************************
Hello Stefan, Do you have any plans to support the laptops with QM67 chipset and AT25DF321A, AT25DF641A flashchips, to upgrade the bios gracefully? If yes, can you please give us the timeline.
Appreciate your help.
Thanks, Raghu
-----Original Message----- From: Stefan Tauner [mailto:stefan.tauner@student.tuwien.ac.at] Sent: Thursday, December 29, 2011 5:51 PM To: Raghuramchary Jallipalli Cc: flashrom@flashrom.org Subject: Re: [flashrom] Help: unable to upgrade bios
On Thu, 29 Dec 2011 12:09:42 +0530 Raghuramchary Jallipalli Raghuramchary.Jallipalli@lntinfotech.com wrote:
Hello Experts, I have tried installing the flashrom-0.9.4 in my laptop having Ubuntu 9.10. The flashchip is AT25DF321A and the chipset is QM67. When I tried to execute the flashrom utility I got the below output: #########################
root@ubuntu:~#
root@ubuntu:~# flashrom
flashrom v0.9.4-r1395 on Linux 2.6.31-14-generic (i686), built with libpci 3.0.0, GCC 4.4.1, little endian flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
========================================================================
WARNING! You seem to be running flashrom on an unsupported laptop.
Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See http://www.flashrom.org/Laptops for details.
If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff.
You have been warned.
========================================================================
Aborting.
root@ubuntu:~#
root@ubuntu:~# ###########################
Can anyone please help on how to proceed further?
Hello Raghu!
The answer to your question can be found in the manpage of flashrom. The warning is set up for a reason (explained in the warning itself, the linked webpage and also in the manpage). If you understand and accept the possible consequences go ahead with the procedure in the manpage.
Most probably it will not work even then, because the QM67 chipset can is probably locked down, which we can not unlock yet. We could verify that with a verbose log (after following the manpage). It would also be interesting to know which laptop that is (then).
This procedure is not to annoy you, but to ensure that users do not take the warning lightly and look at it more closely.
-- Kind regards/Mit freundlichen Gren, Stefan Tauner
The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. L&T Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail" ************************************************************************* This email and attachments have been scanned for potential proprietary or sensitive information leakage. Websense Data Security, Protecting Your Information from the Inside Out. www.websense.com *************************************************************************
-
Raghuramchary Jallipalli -
Stefan Tauner