Failed to flash my APU2

[Kalle Svensson]

Hi team!

I'm trying to flash my APU2 per the instructions at:
http://pcengines.ch/howto.htm#bios

and I get this:
root@fw:/usr/home/kalle # flashrom -w apu2_160311.rom -p internal
flashrom v0.9.7-r1711 on FreeBSD 10.2-RELEASE-p14 (amd64)
flashrom is free software, get the source code at 
http://www.flashrom.org

Calibrating delay loop... OK.
coreboot table found at 0xdffae000.
Found chipset "AMD FCH". Enabling flash write... FCH device found but 
SMBus revision 0x42 does not match known values.
Please report this to [e-mail] and include this log and
the output of lspci -nnvx, thanks!.

root@fw:/usr/home/kalle # pciconf -l -bcevV > pciconf.out
(out file attached)

root@fw:/usr/home/kalle # uname -a
FreeBSD fw 10.2-RELEASE-p14 FreeBSD 10.2-RELEASE-p14 #0: Wed Mar 16 
20:46:12 UTC 2016     
[e-mail]:/usr/obj/usr/src/sys/GENERIC  amd64

Any pointers on how to proceed would be greatly appreciated! :-)

///Kalle

[Kalle Svensson]

Hello again!

I noticed that my version of flashrom was a pretty ancient one, I 
upgraded to a newer version and now I can flash successfully. Sorry to 
bother you with this.

///kalle

On 20 Mar 2016, at 19:36, Kalle Svensson wrote:
> Hi team!
>
> I'm trying to flash my APU2 per the instructions at:
> http://pcengines.ch/howto.htm#bios
>
> and I get this:
> root@fw:/usr/home/kalle # flashrom -w apu2_160311.rom -p internal
> flashrom v0.9.7-r1711 on FreeBSD 10.2-RELEASE-p14 (amd64)
> flashrom is free software, get the source code at 
> http://www.flashrom.org
>
> Calibrating delay loop... OK.
> coreboot table found at 0xdffae000.
> Found chipset "AMD FCH". Enabling flash write... FCH device found but 
> SMBus revision 0x42 does not match known values.
> Please report this to [e-mail] and include this log and
> the output of lspci -nnvx, thanks!.
>
> root@fw:/usr/home/kalle # pciconf -l -bcevV > pciconf.out
> (out file attached)
>
> root@fw:/usr/home/kalle # uname -a
> FreeBSD fw 10.2-RELEASE-p14 FreeBSD 10.2-RELEASE-p14 #0: Wed Mar 16 
> 20:46:12 UTC 2016     
> [e-mail]:/usr/obj/usr/src/sys/GENERIC  amd64
>
> Any pointers on how to proceed would be greatly appreciated! :-)
>
> ///Kalle