Re: [flashrom] Foxconn P4M800P7MA-RS2 - OK

[Stefan Tauner]

On Thu, 20 Oct 2011 17:50:47 -0200
Marcos Felipe Rasia de Mello  wrote:
> 58BF1P33.BIN BIOS
> http://www.foxconnchannel.com/support/downloads_detail.aspx?ID=en-us0000885
>
> The original flash is a Winbond W39V040BPZ. I also tested a W39V040CPZ
> flash that was lying around my desk.
>
> I had to pass "-c W39V040B" and "-c W39V040C" options to flashrom.
>
> Logs attached.
>
> Marcos

hi again and thanks for your sustained stream of reports! ;)

i have marked the board and the two chips as fully tested and will
commit them shortly. if you happen to know the url of a board it would
make things easier if you post that too with the report in the future
(the download link is not really important, if everything works).
as you have noted they share their IDs with two other chips, so the
multiple detections are expected.

Foxconn P4M800P7MA-RS2 - OK

[Marcos Felipe Rasia de Mello]

2011/10/21 Stefan Tauner :
> hi again and thanks for your sustained stream of reports! ;)
>
> i have marked the board and the two chips as fully tested and will
> commit them shortly. if you happen to know the url of a board it would
> make things easier if you post that too with the report in the future
> (the download link is not really important, if everything works).
> as you have noted they share their IDs with two other chips, so the
> multiple detections are expected.

I will remember that next time.

Regards,

Marcos