Tyan S2915-E flash detection problem (HP board)

[Nicolas AVELINE]

Hello !

my tyan :

S2915-E AS#408544-004

root@Serveur:~# flashrom -V
flashrom v0.9.1-r877
No coreboot table found.
DMI string 0: "Hewlett-Packard"
DMI string 1: "HP xw9400 Workstation"
DMI string 2: " "
DMI string 3: "Hewlett-Packard"
DMI string 4: "0A1Ch"
DMI string 5: "E"
Found chipset "NVIDIA MCP55", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 478M loops per second, 100 myus = 255 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x24, id2 0x50
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x41, id2 0x4d
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x24, id2 0x50
Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x24, id2 0x50
Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xff, id2 0xff
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xe9, id2 0x6d, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xd3
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x24, id2 0x50, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename

Note: flashrom can never write when the flash chip isn't found automatically.

root@Serveur:~# superiotool -deV
superiotool r3844
Probing for ALi Super I/O at 0x3f0...
  Failed. Returned data: id=0x0000, rev=0x00
Probing for ALi Super I/O at 0x370...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
  Failed. Returned data: vid=0x0400, id=0x0081
Probing for Fintek Super I/O at 0x4e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
  Failed. Returned data: id=0x8100, rev=0x1
Probing for ITE Super I/O (init=it8761e) at 0x2e...
  Failed. Returned data: id=0x8100, rev=0x1
Probing for ITE Super I/O (init=it8228e) at 0x2e...
  Failed. Returned data: id=0x8100, rev=0x1
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id=0x8100, rev=0x1
Probing for ITE Super I/O (init=standard) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
No dump available for this Super I/O
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Found SMSC FDC37N972 (id=0x0b, rev=0x00) at 0x4e
Register dump:
idx 02 20 21 22 23 24 25 26  27 28 29 2a 2b 2c 2d 2e  2f
val 00 0b 00 00 00 00 00 4e  00 00 00 00 00 00 00 00  00
def 00 0b 00 00 00 04 04 NA  NA 00 00 00 00 00 00 00  00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f3 f4 f5
val 01 04 c0 00 00 00 d1 15  0b 00 10
def 00 03 f0 06 02 0e 00 ff  RR 00 00
LDN 0x01 (Power Management (PM1))
idx 30 60 61
val 01 04 c0
def 00 00 00
LDN 0x03 (Parallel port)
idx 30 60 61 70 74 f0 f1
val 01 04 c0 00 00 00 d1
def 00 00 00 00 04 3c 00
LDN 0x04 (COM1)
idx 30 60 61 70 f0
val 01 04 c0 00 00
def 00 00 00 00 00
LDN 0x05 (COM2)
idx 30 60 61 62 63 70 74 f0  f1 f2 f7 f8
val 01 04 c0 00 00 00 00 00  d1 15 00 00
def 00 00 00 00 00 00 04 00  02 03 00 00
LDN 0x06 (Real-time clock (RTC))
idx 30 60 61 62 63 70 f0 f1
val 01 04 c0 00 00 00 00 d1
def 00 00 70 00 74 00 00 NA
LDN 0x07 (Keyboard)
idx 30 60 61 70 72 f0
val 01 04 c0 00 00 00
def 00 00 00 00 00 00
LDN 0x08 (Embedded Controller (EC))
idx 30 60 61
val 01 04 c0
def 00 00 62
LDN 0x09 (Mailbox)
idx 30 60 61
val 01 04 c0
def 00 00 00
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
  Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
Probing for Winbond Super I/O (init=0x88) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff

root@Serveur:~# lspci -nnvvvxxx
0000:00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
        Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
        Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
        Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
        Revision ID: 1.03
        Link Frequency 0: 1.0GHz
        Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
        Link Frequency 1: 200MHz
        Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
        Prefetchable memory behind bridge Upper: 00-00
        Bus Number: 00
    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
        Mapping Address Base: 00000000fee00000
00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 08 dc e0 01 22 20 11 11 d0 00 00 00
50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
90: 78 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 de fd 00 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff c1 80 00 00 00 00 64 19 03 00 00 10
80: 09 c0 00 2d 16 24 00 80 ff 00 00 01 ff 00 00 00
90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
a0: a3 00 10 10 00 00 00 00 00 04 cb 04 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 50 28 00 fe fd e1 00 b0
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

0000:00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 10
    Region 4: I/O ports at 3000 [size=64]
    Region 5: I/O ports at 3040 [size=64]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: nForce2_smbus
    Kernel modules: i2c-nforce2
00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 30 00 00 41 30 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 00 00
40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 f8 00 00 01 f9 00 00 01 fa 00 00 00 f0 ef fd
70: 01 00 00 00 00 00 e0 fc 00 00 00 00 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 64 15 05 00 b5 03 00 07 80 30 00 00 77 44 44 11
f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00

0000:00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at fce44000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ohci_hcd
00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 40 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 3c 10 fe 12 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

0000:00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 19
    Region 0: Memory at fce4a000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=0098
    Capabilities: [80] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ehci_hcd
00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
10: 00 a0 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
40: 3c 10 fe 12 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 64 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 44 44 00 00 00 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

0000:00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at 3080 [size=16]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pata_amd
00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 30 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 3c 10 fe 12 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 80 00 00 00 00 00 00 99 99 20 20 0a 00 a8 20
60: 00 00 c4 c6 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 c0 91 e7 00 00 02 34 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

0000:00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at 30c0 [size=8]
    Region 1: I/O ports at 3100 [size=4]
    Region 2: I/O ports at 30c8 [size=8]
    Region 3: I/O ports at 3104 [size=4]
    Region 4: I/O ports at 3090 [size=16]
    Region 5: Memory at fce45000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Address: 0000000000000000  Data: 0000
    Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: c1 30 00 00 01 31 00 00 c9 30 00 00 05 31 00 00
20: 91 30 00 00 00 50 e4 fc 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 d7 fb c7 bb 00 00 0b 03 fd bc 0e 6f
90: 00 00 ff 3d 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
d0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 00 e0 07
e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 10 00
f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00

0000:00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 21
    Region 0: I/O ports at 30d0 [size=8]
    Region 1: I/O ports at 3108 [size=4]
    Region 2: I/O ports at 30d8 [size=8]
    Region 3: I/O ports at 310c [size=4]
    Region 4: I/O ports at 30a0 [size=16]
    Region 5: Memory at fce46000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Address: 0000000000000000  Data: 0000
    Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: d1 30 00 00 09 31 00 00 d9 30 00 00 0d 31 00 00
20: a1 30 00 00 00 60 e4 fc 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 6f fd 7f bb 00 00 0f 03 fb f7 f8 73
90: 00 00 23 3f 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 00
e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 a1 80 02
f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00

0000:00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin C routed to IRQ 20
    Region 0: I/O ports at 30e0 [size=8]
    Region 1: I/O ports at 3110 [size=4]
    Region 2: I/O ports at 30e8 [size=8]
    Region 3: I/O ports at 3114 [size=4]
    Region 4: I/O ports at 30b0 [size=16]
    Region 5: Memory at fce47000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Address: 0000000000000000  Data: 0000
    Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: e1 30 00 00 11 31 00 00 e9 30 00 00 15 31 00 00
20: b1 30 00 00 00 70 e4 fc 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 be 7d fb fc 00 00 eb 12 0c bd f7 bd
90: 00 00 92 18 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
d0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 03 00 04
e0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 00 f0 07
f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00

0000:00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fc400000-fccfffff
    Prefetchable memory behind bridge: f8000000-f80fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
    Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
    Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
        Mapping Address Base: 00000000fee00000
00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 02
20: 40 fc c0 fc 00 f8 00 f8 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 0a 0a
40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00
50: 00 00 fe ef 00 00 00 00 ff 1f ff 1f 03 00 84 00
60: 00 00 85 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 fe 0f 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 06 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin B routed to IRQ 22
    Region 0: Memory at fce40000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
        Address: 0000000000000000  Data: 0000
        Masking: 00000000  Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
10: 00 00 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
40: 3c 10 fe 12 01 50 02 c0 00 00 00 00 01 01 0f 00
50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00

0000:00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 50
    Region 0: Memory at fce48000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 30f0 [size=8]
    Region 2: Memory at fce4a100 (32-bit, non-prefetchable) [size=256]
    Region 3: Memory at fce4a300 (32-bit, non-prefetchable) [size=16]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
        Vector table: BAR=2 offset=00000000
        PBA: BAR=3 offset=00000000
    Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
        Address: 00000000feeff00c  Data: 41a1
        Masking: 000000fe  Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: forcedeth
    Kernel modules: forcedeth
00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
10: 00 80 e4 fc f1 30 00 00 00 a1 e4 fc 00 a3 e4 fc
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 01 00 00 00
50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a1 41 00 00
60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00

0000:00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 51
    Region 0: Memory at fce49000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 30f8 [size=8]
    Region 2: Memory at fce4a200 (32-bit, non-prefetchable) [size=256]
    Region 3: Memory at fce4a310 (32-bit, non-prefetchable) [size=16]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
        Vector table: BAR=2 offset=00000000
        PBA: BAR=3 offset=00000000
    Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
        Address: 00000000feeff00c  Data: 41a9
        Masking: 000000fe  Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: forcedeth
    Kernel modules: forcedeth
00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
10: 00 90 e4 fc f9 30 00 00 00 a2 e4 fc 10 a3 e4 fc
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 00 00 00 00
50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a9 41 00 00
60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00

0000:00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=2b, subordinate=2d, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fcd00000-fcdfffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
        Address: 00000000feeff00c  Data: 4151
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
        Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
            ExtTag- RBE+ FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
        LnkCap:    Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
            ClockPM- Suprise- LLActRep+ BwNot-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
            Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd On, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting <?>
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp
00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 2b 2d 00 f1 01 00 20
20: d0 fc d0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 ef fe 00 00 00 00 51 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
        Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
        Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Revision ID: 3.00
        Link Frequency: 1.0GHz
        Link Error: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
    Capabilities: [a0] HyperTransport: Host or Secondary Interface
        Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
        Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Revision ID: 3.00
        Link Frequency: 1.0GHz
        Link Error: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
    Capabilities: [c0] HyperTransport: Host or Secondary Interface
        Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
        Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Revision ID: 3.00
        Link Frequency: 1.0GHz
        Link Error: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 02 14 00 04 04 04 00 01 02 04 00 01 02 04 00
50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
60: 10 00 07 00 e0 02 00 00 20 c8 4e 00 10 0a 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
90: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
d0: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
f0: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Kernel driver in use: amd64_edac
    Kernel modules: amd64_edac_mod
00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 05 00 c0 0e 00 00 00 00
80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 06 00
a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
b0: 90 8f a0 1e c1 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [f0] Secure device <?>
00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 10 10 12 10 01 57 81 1b
60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
a0: 00 28 01 a0 80 18 8c 09 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 1a 29 02 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00

0000:00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
        Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
        Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Revision ID: 3.00
        Link Frequency: 1.0GHz
        Link Error: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
    Capabilities: [a0] HyperTransport: Host or Secondary Interface
        Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
        Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Revision ID: 3.00
        Link Frequency: 1.0GHz
        Link Error: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
    Capabilities: [c0] HyperTransport: Host or Secondary Interface
        Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
        Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
        Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Revision ID: 3.00
        Link Frequency: 1.0GHz
        Link Error: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 08 08 04 00 01 02 24 00 01 02 04 00 01 02 04 00
50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
60: 11 00 07 00 e0 00 00 00 20 c8 4e 00 08 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
90: 92 02 85 04 00 40 00 00 07 00 00 00 00 00 00 00
a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
d0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
f0: 03 90 00 f0 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Kernel driver in use: amd64_edac
    Kernel modules: amd64_edac_mod
00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 05 00 00 0f 00 00 00 00
80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 08 00
a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
b0: b8 19 8c 1f c1 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [f0] Secure device <?>
00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 10 10 12 10 01 59 81 9b
60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
a0: 00 28 01 a0 80 18 8c 0f 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00

0000:00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:04.0 VGA compatible controller [0300]: Trident Microsystems TGUI 9660/938x/968x [1023:9660] (rev d3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
    Latency: 32
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4M]
    Region 1: Memory at fcc00000 (32-bit, non-prefetchable) [size=64K]
    Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=4M]
    [virtual] Expansion ROM at f8000000 [disabled] [size=64K]
    Kernel modules: tridentfb
00: 23 10 60 96 07 00 00 32 d3 00 00 03 00 20 00 00
10: 00 00 40 fc 00 00 c0 fc 00 00 80 fc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fcc14000 (32-bit, non-prefetchable) [size=2K]
    Region 1: Memory at fcc10000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ohci1394
    Kernel modules: firewire-ohci, ohci1394
00: 4c 10 23 80 06 01 10 02 00 10 00 0c 10 20 00 00
10: 00 40 c1 fc 00 00 c1 fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 02 04
40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 00 00 00 3c 10 fe 12 00 00 00 00

0000:2b:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=2b, secondary=2c, subordinate=2c, sec-latency=32
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us
            ClockPM- Suprise- LLActRep- BwNot-
        LnkCtl:    ASPM Disabled; Disabled- Retrain- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [54] PCI-X bridge device
        Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
        Status: Dev=2b:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
        Upstream: Capacity=32 CommitmentLimit=32
        Downstream: Capacity=16 CommitmentLimit=16
    Capabilities: [64] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Bridge: PM- B3+
    Capabilities: [100] Advanced Error Reporting <?>
    Kernel modules: shpchp
00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 2b 2c 2c 20 f1 01 20 24
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
40: 10 54 71 00 01 00 00 00 04 20 0a 00 81 6c 02 00
50: 00 00 41 00 07 64 c3 00 00 2b 00 00 20 00 20 00
60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 0c 00 19 1f 00 00 00 00
90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:2b:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=128]
    Bus: primary=2b, secondary=2d, subordinate=2d, sec-latency=32
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us
            ClockPM- Suprise- LLActRep- BwNot-
        LnkCtl:    ASPM Disabled; Disabled- Retrain- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [54] PCI-X bridge device
        Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
        Status: Dev=2b:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
        Upstream: Capacity=32 CommitmentLimit=32
        Downstream: Capacity=16 CommitmentLimit=16
    Capabilities: [64] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Bridge: PM- B3+
    Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Address: 0000000000000000  Data: 0000
    Capabilities: [7c] Hot-plug capable
    Capabilities: [100] Advanced Error Reporting <?>
    Kernel modules: shpchp
00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
10: 04 00 d0 fc 00 00 00 00 2b 2d 2d 20 f1 01 20 24
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 02 00
40: 10 54 71 00 01 00 00 00 04 20 00 00 81 6c 02 00
50: 00 00 41 00 07 64 03 00 01 2b 00 00 20 00 20 00
60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0001:40:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
        Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
        Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
        Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
        Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
        Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
        Revision ID: 1.03
        Link Frequency 0: 1.0GHz
        Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
        Link Frequency 1: 200MHz
        Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
        Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
        Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
        Prefetchable memory behind bridge Upper: 00-00
        Bus Number: 00
    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
        Mapping Address Base: 00000000fee00000
00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
90: 78 00 40 90 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0001:40:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge [10de:0361] (rev a3)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=4K]
00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 fd 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
70: 10 00 ff ff c7 80 00 00 00 00 46 20 00 00 00 c0
80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

0001:40:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 255
    Region 4: I/O ports at 2000 [size=64]
    Region 5: I/O ports at 2040 [size=64]
    Capabilities: [44] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: nForce2_smbus
    Kernel modules: i2c-nforce2
00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 20 00 00 41 20 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 e8 00 00 01 e9 00 00 01 ea 00 00 00 00 00 00
70: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: e6 16 05 00 b5 03 00 07 80 ff 57 00 61 44 44 11
f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00

0001:40:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=40, secondary=6b, subordinate=6b, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: fcf00000-fcffffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
        Address: 00000000feeff00c  Data: 4159
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
        Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
            ExtTag- RBE+ FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
        LnkCap:    Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
            ClockPM- Suprise- LLActRep+ BwNot-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
            Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Off, PwrInd On, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting <?>
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp
00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 40 6b 6b 00 11 11 00 20
20: f0 fc f0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 ef fe 00 00 00 00 59 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 01 00 41 3c 11 02
90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0001:6b:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
    Subsystem: Hewlett-Packard Company Device [103c:12fe]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 43
    Region 0: I/O ports at 1000 [disabled] [size=256]
    Region 1: Memory at <unassigned> (64-bit, non-prefetchable) [disabled]
    Region 3: Memory at <unassigned> (64-bit, non-prefetchable) [disabled]
    [virtual] Expansion ROM at fcf00000 [disabled] [size=1M]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] Express (v1) Endpoint, MSI 00
        DevCap:    MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
            ClockPM- Suprise- LLActRep- BwNot-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Address: 0000000000000000  Data: 0000
    Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
        Vector table: BAR=1 offset=00002000
        PBA: BAR=1 offset=00003000
    Capabilities: [100] Advanced Error Reporting <?>
    Kernel modules: mptsas
00: 00 10 58 00 00 00 10 00 08 00 00 01 00 00 00 00
10: 01 00 00 00 04 00 00 00 00 00 00 00 04 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 68 02 06 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 10 98 01 00 25 00 00 00
70: 10 28 00 00 81 0c 00 00 00 00 41 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 05 b0 80 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 11 00 00 00 01 20 00 00 01 30 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

_________________________________________________________________
Tchattez en direct en en vidéo avec vos amis !  
http://www.windowslive.fr/messenger/

[Phil]

Hiya,

I'll add my Tyan S2915 to the mix, as it  also does not find the chip:

they are attacched, but I do not know if this is visible or not...

Cheers

PHiL

Nicolas AVELINE wrote:
> Hello !
>
> my tyan :
>
> S2915-E AS#408544-004
>
> root@Serveur:~# flashrom -V*
> flashrom v0.9.1-r877
> No coreboot table found.
> DMI string 0: "Hewlett-Packard"
> DMI string 1: "HP xw9400 Workstation"
> DMI string 2: " "
> DMI string 3: "Hewlett-Packard"
> DMI string 4: "0A1Ch"
> DMI string 5: "E"
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 478M loops per second, 100 myus = 255 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x24, id2 0x50
> Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x41, id2 
> 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x41, id2 0x4d
> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xe9, id2 
> 0x6d, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xe9, id2 
> 0x6d, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, 
> id2 0xff
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, 
> id2 0xff
> Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x24, 
> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x24, 
> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x24, id2 0x50
> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x24, id2 0x50
> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xff, id2 0xff
> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
> Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
> Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
> Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
> Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xe9, id2 
> 0x6d, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x41, id2 
> 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, 
> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x41, 
> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip 
> bus type SPI are incompatible.
> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip 
> bus type SPI are incompatible.
> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
> Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x41, 
> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x41, 
> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xd3
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
> Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x24, 
> id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 
> 0xd3, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x24, id2 
> 0x50, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond 
> W29EE011 because the probing sequence puts the AMIC A49LF040A in a 
> funky state. Use 'flashrom -c W29EE011' if you have a board with this 
> chip.
> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x41, 
> id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, 
> id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe 
> timing information, using default 10mS/40uS. probe_jedec_common: id1 
> 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 
> is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct 
> probe timing information, using default 10mS/40uS. probe_jedec_common: 
> id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, 
> id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host 
> bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus 
> type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus 
> type Non-SPI and chip bus type SPI are incompatible.
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found 
> automatically.
>
> *root@Serveur:~# superiotool -deV*
> superiotool r3844
> Probing for ALi Super I/O at 0x3f0...
>   Failed. Returned data: id=0x0000, rev=0x00
> Probing for ALi Super I/O at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
>   Failed. Returned data: vid=0x0400, id=0x0081
> Probing for Fintek Super I/O at 0x4e...
>   Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=standard) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
> No dump available for this Super I/O
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> Found SMSC FDC37N972 (id=0x0b, rev=0x00) at 0x4e
> Register dump:
> idx 02 20 21 22 23 24 25 26  27 28 29 2a 2b 2c 2d 2e  2f
> val 00 0b 00 00 00 00 00 4e  00 00 00 00 00 00 00 00  00
> def 00 0b 00 00 00 04 04 NA  NA 00 00 00 00 00 00 00  00
> LDN 0x00 (Floppy)
> idx 30 60 61 70 74 f0 f1 f2  f3 f4 f5
> val 01 04 c0 00 00 00 d1 15  0b 00 10
> def 00 03 f0 06 02 0e 00 ff  RR 00 00
> LDN 0x01 (Power Management (PM1))
> idx 30 60 61
> val 01 04 c0
> def 00 00 00
> LDN 0x03 (Parallel port)
> idx 30 60 61 70 74 f0 f1
> val 01 04 c0 00 00 00 d1
> def 00 00 00 00 04 3c 00
> LDN 0x04 (COM1)
> idx 30 60 61 70 f0
> val 01 04 c0 00 00
> def 00 00 00 00 00
> LDN 0x05 (COM2)
> idx 30 60 61 62 63 70 74 f0  f1 f2 f7 f8
> val 01 04 c0 00 00 00 00 00  d1 15 00 00
> def 00 00 00 00 00 00 04 00  02 03 00 00
> LDN 0x06 (Real-time clock (RTC))
> idx 30 60 61 62 63 70 f0 f1
> val 01 04 c0 00 00 00 00 d1
> def 00 00 70 00 74 00 00 NA
> LDN 0x07 (Keyboard)
> idx 30 60 61 70 72 f0
> val 01 04 c0 00 00 00
> def 00 00 00 00 00 00
> LDN 0x08 (Embedded Controller (EC))
> idx 30 60 61
> val 01 04 c0
> def 00 00 62
> LDN 0x09 (Mailbox)
> idx 30 60 61
> val 01 04 c0
> def 00 00 00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x88) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>
> *root@Serveur:~# lspci -nnvvvxxx*
> 0000:00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory 
> Controller [10de:0369] (rev a2)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Capabilities: [44] HyperTransport: Slave or Primary Interface
>         Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>         Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>         Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>         Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
> DwFcInEn- LWO=8bit DwFcOutEn-
>         Revision ID: 1.03
>         Link Frequency 0: 1.0GHz
>         Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>         Link Frequency 1: 200MHz
>         Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>         Prefetchable memory behind bridge Upper: 00-00
>         Bus Number: 00
>     Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>         Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
> 40: 3c 10 fe 12 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 78 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge 
> [10de:0364] (rev a3)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
> 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> 40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 de fd 00 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
> 70: 10 00 ff ff c1 80 00 00 00 00 64 19 03 00 00 10
> 80: 09 c0 00 2d 16 24 00 80 ff 00 00 01 ff 00 00 00
> 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: a3 00 10 10 00 00 00 00 00 04 cb 04 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 50 28 00 fe fd e1 00 b0
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 0000:00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] 
> (rev a3)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Interrupt: pin A routed to IRQ 10
>     Region 4: I/O ports at 3000 [size=64]
>     Region 5: I/O ports at 3040 [size=64]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Kernel driver in use: nForce2_smbus
>     Kernel modules: i2c-nforce2
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 30 00 00 41 30 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 00 00
> 40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 f8 00 00 01 f9 00 00 01 fa 00 00 00 f0 ef fd
> 70: 01 00 00 00 00 00 e0 fc 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 64 15 05 00 b5 03 00 07 80 30 00 00 77 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 0000:00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB 
> Controller [10de:036c] (rev a1) (prog-if 10)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (750ns min, 250ns max)
>     Interrupt: pin A routed to IRQ 18
>     Region 0: Memory at fce44000 (32-bit, non-prefetchable) [size=4K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Kernel driver in use: ohci_hcd
> 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
> 10: 00 40 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
> 40: 3c 10 fe 12 01 00 02 fe 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 0000:00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB 
> Controller [10de:036d] (rev a2) (prog-if 20)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (750ns min, 250ns max)
>     Interrupt: pin B routed to IRQ 19
>     Region 0: Memory at fce4a000 (32-bit, non-prefetchable) [size=256]
>     Capabilities: [44] Debug port: BAR=1 offset=0098
>     Capabilities: [80] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Kernel driver in use: ehci_hcd
> 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
> 10: 00 a0 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
> 40: 3c 10 fe 12 0a 80 98 20 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
> 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 64 00
> 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
> 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
> b0: 44 44 00 00 00 00 00 00 ff 03 00 00 00 00 00 00
> c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 0000:00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE 
> [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (750ns min, 250ns max)
>     Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
> [disabled] [size=8]
>     Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
> [disabled] [size=1]
>     Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
> [disabled] [size=8]
>     Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
> [disabled] [size=1]
>     Region 4: I/O ports at 3080 [size=16]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Kernel driver in use: pata_amd
> 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 30 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
> 40: 3c 10 fe 12 01 00 02 00 00 00 00 00 00 00 00 00
> 50: 02 80 00 00 00 00 00 00 99 99 20 20 0a 00 a8 20
> 60: 00 00 c4 c6 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 c0 91 e7 00 00 02 34 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 0000:00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA 
> Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (750ns min, 250ns max)
>     Interrupt: pin A routed to IRQ 22
>     Region 0: I/O ports at 30c0 [size=8]
>     Region 1: I/O ports at 3100 [size=4]
>     Region 2: I/O ports at 30c8 [size=8]
>     Region 3: I/O ports at 3104 [size=4]
>     Region 4: I/O ports at 3090 [size=16]
>     Region 5: Memory at fce45000 (32-bit, non-prefetchable) [size=4K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/2 Enable-
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: c1 30 00 00 01 31 00 00 c9 30 00 00 05 31 00 00
> 20: 91 30 00 00 00 50 e4 fc 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
> 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 d7 fb c7 bb 00 00 0b 03 fd bc 0e 6f
> 90: 00 00 ff 3d 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 00 e0 07
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 10 00
> f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
>
> 0000:00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA 
> Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (750ns min, 250ns max)
>     Interrupt: pin B routed to IRQ 21
>     Region 0: I/O ports at 30d0 [size=8]
>     Region 1: I/O ports at 3108 [size=4]
>     Region 2: I/O ports at 30d8 [size=8]
>     Region 3: I/O ports at 310c [size=4]
>     Region 4: I/O ports at 30a0 [size=16]
>     Region 5: Memory at fce46000 (32-bit, non-prefetchable) [size=4K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/2 Enable-
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: d1 30 00 00 09 31 00 00 d9 30 00 00 0d 31 00 00
> 20: a1 30 00 00 00 60 e4 fc 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
> 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 6f fd 7f bb 00 00 0f 03 fb f7 f8 73
> 90: 00 00 23 3f 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 a1 80 02
> f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
>
> 0000:00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA 
> Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (750ns min, 250ns max)
>     Interrupt: pin C routed to IRQ 20
>     Region 0: I/O ports at 30e0 [size=8]
>     Region 1: I/O ports at 3110 [size=4]
>     Region 2: I/O ports at 30e8 [size=8]
>     Region 3: I/O ports at 3114 [size=4]
>     Region 4: I/O ports at 30b0 [size=16]
>     Region 5: Memory at fce47000 (32-bit, non-prefetchable) [size=4K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/2 Enable-
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: e1 30 00 00 11 31 00 00 e9 30 00 00 15 31 00 00
> 20: b1 30 00 00 00 70 e4 fc 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
> 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 be 7d fb fc 00 00 eb 12 0c bd f7 bd
> 90: 00 00 92 18 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
> d0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 03 00 04
> e0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 00 f0 07
> f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00
>
> 0000:00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge 
> [10de:0370] (rev a2) (prog-if 01)
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>     I/O behind bridge: 0000f000-00000fff
>     Memory behind bridge: fc400000-fccfffff
>     Prefetchable memory behind bridge: f8000000-f80fffff
>     Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR-
>     BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>         PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
>     Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
>     Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
>         Mapping Address Base: 00000000fee00000
> 00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 02
> 20: 40 fc c0 fc 00 f8 00 f8 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 0a 0a
> 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00
> 50: 00 00 fe ef 00 00 00 00 ff 1f ff 1f 03 00 84 00
> 60: 00 00 85 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 fe 0f 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
> 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 06 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
> b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
> c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:06.1 Audio device [0403]: nVidia Corporation MCP55 High 
> Definition Audio [10de:0371] (rev a2)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (500ns min, 1250ns max)
>     Interrupt: pin B routed to IRQ 22
>     Region 0: Memory at fce40000 (32-bit, non-prefetchable) [size=16K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
> Queue=0/0 Enable-
>         Address: 0000000000000000  Data: 0000
>         Masking: 00000000  Pending: 00000000
>     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: HDA Intel
>     Kernel modules: snd-hda-intel
> 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
> 10: 00 00 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
> 40: 3c 10 fe 12 01 50 02 c0 00 00 00 00 01 01 0f 00
> 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00
>
> 0000:00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet 
> [10de:0373] (rev a3)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (250ns min, 5000ns max)
>     Interrupt: pin A routed to IRQ 50
>     Region 0: Memory at fce48000 (32-bit, non-prefetchable) [size=4K]
>     Region 1: I/O ports at 30f0 [size=8]
>     Region 2: Memory at fce4a100 (32-bit, non-prefetchable) [size=256]
>     Region 3: Memory at fce4a300 (32-bit, non-prefetchable) [size=16]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>         Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>     Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
>         Vector table: BAR=2 offset=00000000
>         PBA: BAR=3 offset=00000000
>     Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
> Queue=0/3 Enable+
>         Address: 00000000feeff00c  Data: 41a1
>         Masking: 000000fe  Pending: 00000000
>     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: forcedeth
>     Kernel modules: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 80 e4 fc f1 30 00 00 00 a1 e4 fc 00 a3 e4 fc
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
> 40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 01 00 00 00
> 50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a1 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
>
> 0000:00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet 
> [10de:0373] (rev a3)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0 (250ns min, 5000ns max)
>     Interrupt: pin A routed to IRQ 51
>     Region 0: Memory at fce49000 (32-bit, non-prefetchable) [size=4K]
>     Region 1: I/O ports at 30f8 [size=8]
>     Region 2: Memory at fce4a200 (32-bit, non-prefetchable) [size=256]
>     Region 3: Memory at fce4a310 (32-bit, non-prefetchable) [size=16]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>         Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>     Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
>         Vector table: BAR=2 offset=00000000
>         PBA: BAR=3 offset=00000000
>     Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
> Queue=0/3 Enable+
>         Address: 00000000feeff00c  Data: 41a9
>         Masking: 000000fe  Pending: 00000000
>     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
>     Kernel driver in use: forcedeth
>     Kernel modules: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 90 e4 fc f9 30 00 00 00 a2 e4 fc 10 a3 e4 fc
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
> 40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 00 00 00 00
> 50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a9 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
>
> 0000:00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express 
> bridge [10de:0378] (rev a3)
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0, Cache Line Size: 64 bytes
>     Bus: primary=00, secondary=2b, subordinate=2d, sec-latency=0
>     I/O behind bridge: 0000f000-00000fff
>     Memory behind bridge: fcd00000-fcdfffff
>     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR-
>     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>     Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>     Capabilities: [48] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/1 Enable+
>         Address: 00000000feeff00c  Data: 4151
>     Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>         Mapping Address Base: 00000000fee00000
>     Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>             ExtTag- RBE+ FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> TransPend-
>         LnkCap:    Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, 
> Latency L0 <512ns, L1 <4us
>             ClockPM- Suprise- LLActRep+ BwNot-
>         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
> DLActive+ BWMgmt- ABWMgmt-
>         SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
> Surpise-
>             Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>         SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
> HPIrq- LinkChg-
>             Control: AttnInd Off, PwrInd On, Power- Interlock-
>         SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
> Interlock-
>             Changed: MRL- PresDet+ LinkState+
>         RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- 
> CRSVisible-
>         RootCap: CRSVisible-
>         RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>     Capabilities: [100] Virtual Channel <?>
>     Capabilities: [160] Advanced Error Reporting <?>
>     Kernel driver in use: pcieport-driver
>     Kernel modules: shpchp
> 00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 2b 2d 00 f1 01 00 20
> 20: d0 fc d0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 ef fe 00 00 00 00 51 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Capabilities: [80] HyperTransport: Host or Secondary Interface
>         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
> <EOCErr- DUL-
>         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> DwFcInEn- LWO=16bit DwFcOutEn-
>         Revision ID: 3.00
>         Link Frequency: 1.0GHz
>         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> UIDRD- ExtRS- UCnfE-
>     Capabilities: [a0] HyperTransport: Host or Secondary Interface
>         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
> <EOCErr- DUL-
>         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> DwFcInEn- LWO=16bit DwFcOutEn-
>         Revision ID: 3.00
>         Link Frequency: 1.0GHz
>         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> UIDRD- ExtRS- UCnfE-
>     Capabilities: [c0] HyperTransport: Host or Secondary Interface
>         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
> <EOCErr- DUL-
>         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> DwFcInEn- LWO=16bit DwFcOutEn-
>         Revision ID: 3.00
>         Link Frequency: 1.0GHz
>         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 02 14 00 04 04 04 00 01 02 04 00 01 02 04 00
> 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
> 60: 10 00 07 00 e0 02 00 00 20 c8 4e 00 10 0a 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> 90: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> d0: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] Address Map [1022:1201]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
> 90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
> d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
> e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
> f0: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Kernel driver in use: amd64_edac
>     Kernel modules: amd64_edac_mod
> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 05 00 c0 0e 00 00 00 00
> 80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
> 90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 06 00
> a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
> b0: 90 8f a0 1e c1 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Capabilities: [f0] Secure device <?>
> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 10 10 12 10 01 57 81 1b
> 60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
> 70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
> 80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
> 90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
> a0: 00 28 01 a0 80 18 8c 09 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 1a 29 02 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
> e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00
>
> 0000:00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] Link Control [1022:1204]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Capabilities: [80] HyperTransport: Host or Secondary Interface
>         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
> <EOCErr- DUL-
>         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> DwFcInEn- LWO=16bit DwFcOutEn-
>         Revision ID: 3.00
>         Link Frequency: 1.0GHz
>         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> UIDRD- ExtRS- UCnfE-
>     Capabilities: [a0] HyperTransport: Host or Secondary Interface
>         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
> <EOCErr- DUL-
>         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> DwFcInEn- LWO=16bit DwFcOutEn-
>         Revision ID: 3.00
>         Link Frequency: 1.0GHz
>         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> UIDRD- ExtRS- UCnfE-
>     Capabilities: [c0] HyperTransport: Host or Secondary Interface
>         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- 
> <EOCErr- DUL-
>         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> DwFcInEn- LWO=16bit DwFcOutEn-
>         Revision ID: 3.00
>         Link Frequency: 1.0GHz
>         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 08 08 04 00 01 02 24 00 01 02 04 00 01 02 04 00
> 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
> 60: 11 00 07 00 e0 00 00 00 20 c8 4e 00 08 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> 90: 92 02 85 04 00 40 00 00 07 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> d0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] Address Map [1022:1201]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
> 90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
> d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
> e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
> f0: 03 90 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Kernel driver in use: amd64_edac
>     Kernel modules: amd64_edac_mod
> 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 05 00 00 0f 00 00 00 00
> 80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
> 90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 08 00
> a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
> b0: b8 19 8c 1f c1 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Capabilities: [f0] Secure device <?>
> 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 10 10 12 10 01 59 81 9b
> 60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
> 70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
> 80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
> 90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
> a0: 00 28 01 a0 80 18 8c 0f 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
> e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00
>
> 0000:00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> [Opteron, Athlon64, Sempron] Link Control [1022:1204]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:01:04.0 VGA compatible controller [0300]: Trident Microsystems 
> TGUI 9660/938x/968x [1023:9660] (rev d3)
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort+ <MAbort+ >SERR- <PERR- INTx-
>     Latency: 32
>     Interrupt: pin A routed to IRQ 5
>     Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4M]
>     Region 1: Memory at fcc00000 (32-bit, non-prefetchable) [size=64K]
>     Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=4M]
>     [virtual] Expansion ROM at f8000000 [disabled] [size=64K]
>     Kernel modules: tridentfb
> 00: 23 10 60 96 07 00 00 32 d3 00 00 03 00 20 00 00
> 10: 00 00 40 fc 00 00 c0 fc 00 00 80 fc 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments 
> TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>     Interrupt: pin A routed to IRQ 16
>     Region 0: Memory at fcc14000 (32-bit, non-prefetchable) [size=2K]
>     Region 1: Memory at fcc10000 (32-bit, non-prefetchable) [size=16K]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>     Kernel driver in use: ohci1394
>     Kernel modules: firewire-ohci, ohci1394
> 00: 4c 10 23 80 06 01 10 02 00 10 00 0c 10 20 00 00
> 10: 00 40 c1 fc 00 00 c1 fc 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 02 04
> 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
> f0: 10 00 00 00 82 00 00 00 3c 10 fe 12 00 00 00 00
>
> 0000:2b:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express
> PCI/PCI-X Bridge [1033:0125] (rev 06)
>   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0, Cache Line Size: 64 bytes
>     Bus: primary=2b, secondary=2c, subordinate=2c, sec-latency=32
>     I/O behind bridge: 0000f000-00000fff
>     Memory behind bridge: fff00000-000fffff
>     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>     Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR-
>     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>     Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>             ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal+ 
> Unsupported-
>             RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
> TransPend-
>         LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> Latency L0 <4us, L1 <16us
>             ClockPM- Suprise- LLActRep- BwNot-
>         LnkCtl:    ASPM Disabled; Disabled- Retrain- CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
> DLActive- BWMgmt- ABWMgmt-
>     Capabilities: [54] PCI-X bridge device
>         Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>         Status: Dev=2b:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>         Upstream: Capacity=32 CommitmentLimit=32
>         Downstream: Capacity=16 CommitmentLimit=16
>     Capabilities: [64] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA 
> PME(D0+,D1+,D2-,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Bridge: PM- B3+
>     Capabilities: [100] Advanced Error Reporting <?>
>     Kernel modules: shpchp
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 2b 2c 2c 20 f1 01 20 24
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
> 40: 10 54 71 00 01 00 00 00 04 20 0a 00 81 6c 02 00
> 50: 00 00 41 00 07 64 c3 00 00 2b 00 00 20 00 20 00
> 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 0c 00 19 1f 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0000:2b:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express
> PCI/PCI-X Bridge [1033:0125] (rev 06)
>   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0, Cache Line Size: 64 bytes
>     Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=128]
>     Bus: primary=2b, secondary=2d, subordinate=2d, sec-latency=32
>     I/O behind bridge: 0000f000-00000fff
>     Memory behind bridge: fff00000-000fffff
>     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>     Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR-
>     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>     Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>             ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal+ 
> Unsupported-
>             RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> TransPend-
>         LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> Latency L0 <4us, L1 <16us
>             ClockPM- Suprise- LLActRep- BwNot-
>         LnkCtl:    ASPM Disabled; Disabled- Retrain- CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
> DLActive- BWMgmt- ABWMgmt-
>     Capabilities: [54] PCI-X bridge device
>         Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>         Status: Dev=2b:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
>         Upstream: Capacity=32 CommitmentLimit=32
>         Downstream: Capacity=16 CommitmentLimit=16
>     Capabilities: [64] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA 
> PME(D0+,D1+,D2-,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Bridge: PM- B3+
>     Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/0 Enable-
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [7c] Hot-plug capable
>     Capabilities: [100] Advanced Error Reporting <?>
>     Kernel modules: shpchp
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 04 00 d0 fc 00 00 00 00 2b 2d 2d 20 f1 01 20 24
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 02 00
> 40: 10 54 71 00 01 00 00 00 04 20 00 00 81 6c 02 00
> 50: 00 00 41 00 07 64 03 00 01 2b 00 00 20 00 20 00
> 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0001:40:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory 
> Controller [10de:0369] (rev a2)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Capabilities: [44] HyperTransport: Slave or Primary Interface
>         Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>         Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>         Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>         Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>         Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
> DwFcInEn- LWO=8bit DwFcOutEn-
>         Revision ID: 1.03
>         Link Frequency 0: 1.0GHz
>         Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>         Link Frequency 1: 200MHz
>         Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>         Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>         Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>         Prefetchable memory behind bridge Upper: 00-00
>         Bus Number: 00
>     Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>         Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
> 40: 3c 10 fe 12 08 dc e0 01 22 00 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 78 00 40 90 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0001:40:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge 
> [10de:0361] (rev a3)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=4K]
> 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
> 10: 00 00 00 00 00 00 00 fd 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> 40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
> 70: 10 00 ff ff c7 80 00 00 00 00 46 20 00 00 00 c0
> 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
> 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 0001:40:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] 
> (rev a3)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Interrupt: pin A routed to IRQ 255
>     Region 4: I/O ports at 2000 [size=64]
>     Region 5: I/O ports at 2040 [size=64]
>     Capabilities: [44] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Kernel driver in use: nForce2_smbus
>     Kernel modules: i2c-nforce2
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 01 20 00 00 41 20 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 e8 00 00 01 e9 00 00 01 ea 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: e6 16 05 00 b5 03 00 07 80 ff 57 00 61 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 0001:40:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express 
> bridge [10de:0378] (rev a3)
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR+ FastB2B- DisINTx+
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0, Cache Line Size: 64 bytes
>     Bus: primary=40, secondary=6b, subordinate=6b, sec-latency=0
>     I/O behind bridge: 00001000-00001fff
>     Memory behind bridge: fcf00000-fcffffff
>     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR-
>     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>     Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>     Capabilities: [48] Power Management version 2
>         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/1 Enable+
>         Address: 00000000feeff00c  Data: 4159
>     Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>         Mapping Address Base: 00000000fee00000
>     Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>             ExtTag- RBE+ FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> TransPend-
>         LnkCap:    Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, 
> Latency L0 <512ns, L1 <4us
>             ClockPM- Suprise- LLActRep+ BwNot-
>         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
> DLActive+ BWMgmt- ABWMgmt-
>         SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
> Surpise-
>             Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>         SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
> HPIrq- LinkChg-
>             Control: AttnInd Off, PwrInd On, Power- Interlock-
>         SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
> Interlock-
>             Changed: MRL- PresDet+ LinkState+
>         RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- 
> CRSVisible-
>         RootCap: CRSVisible-
>         RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>     Capabilities: [100] Virtual Channel <?>
>     Capabilities: [160] Advanced Error Reporting <?>
>     Kernel driver in use: pcieport-driver
>     Kernel modules: shpchp
> 00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 40 6b 6b 00 11 11 00 20
> 20: f0 fc f0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 ef fe 00 00 00 00 59 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 01 00 41 3c 11 02
> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 0001:6b:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 
> SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
>     Subsystem: Hewlett-Packard Company Device [103c:12fe]
>     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Interrupt: pin A routed to IRQ 43
>     Region 0: I/O ports at 1000 [disabled] [size=256]
>     Region 1: Memory at <unassigned> (64-bit, non-prefetchable) [disabled]
>     Region 3: Memory at <unassigned> (64-bit, non-prefetchable) [disabled]
>     [virtual] Expansion ROM at fcf00000 [disabled] [size=1M]
>     Capabilities: [50] Power Management version 2
>         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>     Capabilities: [68] Express (v1) Endpoint, MSI 00
>         DevCap:    MaxPayload 4096 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>             MaxPayload 128 bytes, MaxReadReq 512 bytes
>         DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> TransPend-
>         LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> Latency L0 <64ns, L1 <1us
>             ClockPM- Suprise- LLActRep- BwNot-
>         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
> DLActive- BWMgmt- ABWMgmt-
>     Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ 
> Queue=0/0 Enable-
>         Address: 0000000000000000  Data: 0000
>     Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
>         Vector table: BAR=1 offset=00002000
>         PBA: BAR=1 offset=00003000
>     Capabilities: [100] Advanced Error Reporting <?>
>     Kernel modules: mptsas
> 00: 00 10 58 00 00 00 10 00 08 00 00 01 00 00 00 00
> 10: 01 00 00 00 04 00 00 00 00 00 00 00 04 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 68 02 06 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 10 98 01 00 25 00 00 00
> 70: 10 28 00 00 81 0c 00 00 00 00 41 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 05 b0 80 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 11 00 00 00 01 20 00 00 01 30 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Windows 7 : Trouvez le PC qui vous convient! Découvrez notre offre ! 
> http://clk.atdmt.com/FRM/go/181574577/direct/01/
>
> flashrom mailing list
> [e-mail]
> http://www.flashrom.org/mailman/listinfo/flashrom

[Phil]

here's my data....sorry!  PHiL
> flashrom v0.9.1-r877
> No coreboot table found.
> DMI string 0: "Tyan Computer Corporation "
> DMI string 1: "MCP55 "
> DMI string 2: "REFERENCE"
> DMI string 3: "Tyan Computer Corporation "
> DMI string 4: "S2915 "
> DMI string 5: "REFERENCE"
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 554M loops per second, 100 myus = 202 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x5b, id2 0xfb
> Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x00, id2 
> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x00, id2 
> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, 
> id2 0x50
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, 
> id2 0x50
> Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5b, 
> id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5b, 
> id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x4e, id2 0x41
> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
> Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x00, id2 
> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x0d, 
> id2 0xd6, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip 
> bus type SPI are incompatible.
> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip 
> bus type SPI are incompatible.
> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 
> 0x41, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x5d, id2 0x58
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2 
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
> flash content
> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x5b, 
> id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5d, id2 
> 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and 
> chip bus type SPI are incompatible.
> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI 
> and chip bus type SPI are incompatible.
> Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x5b, id2 
> 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond 
> W29EE011 because the probing sequence puts the AMIC A49LF040A in a 
> funky state. Use 'flashrom -c W29EE011' if you have a board with this 
> chip.
> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing 
> information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x4e, 
> id2 0x41, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, 
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> normal flash content
> Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x5d, 
> id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe 
> timing information, using default 10mS/40uS. probe_jedec_common: id1 
> 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 
> is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct 
> probe timing information, using default 10mS/40uS. probe_jedec_common: 
> id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, 
> id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host 
> bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type 
> Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus 
> type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus 
> type Non-SPI and chip bus type SPI are incompatible.
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found 
> automatically.
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller 
> [10de:0369] (rev a2)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Capabilities: [44] HyperTransport: Slave or Primary Interface
>                 Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>                 Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- 
> TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>                 Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ 
> TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- 
> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>                 Revision ID: 1.03
>                 Link Frequency 0: 1.0GHz
>                 Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 
> 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD-
>                 Link Frequency 1: 200MHz
>                 Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 
> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- 
> CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>                 Prefetchable memory behind bridge Upper: 00-00
>                 Bus Number: 00
>         Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>                 Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge 
> [10de:0364] (rev a3)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Region 0: I/O ports at 1c00 [size=128]
> 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
> 10: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
> 70: 10 00 ff ff c5 80 00 00 00 00 44 19 0d 40 20 10
> 80: 09 20 00 8c 1d 83 00 60 f0 00 00 00 ff 00 00 00
> 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 03 00 10 11 05 43 00 00 00 06 8f 06 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 44 00 00 fe fd 03 00 a0
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 255
>         Region 0: I/O ports at 3000 [size=64]
>         Region 4: I/O ports at 3440 [size=64]
>         Region 5: I/O ports at 3400 [size=64]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 34 00 00 01 34 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 a0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 64 15 05 00 a5 03 50 07 80 30 80 00 77 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller 
> [10de:036c] (rev a1) (prog-if 10 [OHCI])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin A routed to IRQ 21
>         Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: ohci_hcd
> 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
> 10: 00 40 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
> 40: f1 10 15 29 01 00 02 fe 00 00 00 00 00 00 00 00
> 50: 04 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller 
> [10de:036d] (rev a2) (prog-if 20 [EHCI])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin B routed to IRQ 22
>         Region 0: Memory at a0005000 (32-bit, non-prefetchable) 
> [size=256]
>         Capabilities: [44] Debug port: BAR=1 offset=0098
>         Capabilities: [80] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>         Kernel driver in use: ehci_hcd
> 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
> 10: 00 50 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
> 40: f1 10 15 29 0a 80 98 20 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
> 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 f4 00
> 80: 01 00 02 fe 00 80 00 00 00 00 00 00 15 16 00 00
> 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 01 00 00 01 00 00 08 80 00 00 00 00 00 00 00 00
> b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
> c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] 
> (rev a1) (prog-if 8a [Master SecP PriP])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (750ns min, 250ns max)
>         Region 0: [virtual] Memory at 000001f0 (32-bit, 
> non-prefetchable) [size=8]
>         Region 1: [virtual] Memory at 000003f0 (type 3, 
> non-prefetchable) [size=1]
>         Region 2: [virtual] Memory at 00000170 (32-bit, 
> non-prefetchable) [size=8]
>         Region 3: [virtual] Memory at 00000370 (type 3, 
> non-prefetchable) [size=1]
>         Region 4: I/O ports at 3480 [size=16]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: pata_amd
> 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 34 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
> 40: f1 10 15 29 01 00 02 00 00 00 00 00 00 00 00 00
> 50: 02 f0 00 00 00 00 00 00 99 99 99 20 2a 00 a8 20
> 60: 00 00 00 c5 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 c0 34 33 00 00 04 1c 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 12 00 00 00 00 00 00 00
>
> 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller 
> [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin A routed to IRQ 20
>         Region 0: I/O ports at 34d0 [size=8]
>         Region 1: I/O ports at 34c4 [size=4]
>         Region 2: I/O ports at 34c8 [size=8]
>         Region 3: I/O ports at 34c0 [size=4]
>         Region 4: I/O ports at 3490 [size=16]
>         Region 5: Memory at a0006000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>         Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: d1 34 00 00 c5 34 00 00 c9 34 00 00 c1 34 00 00
> 20: 91 34 00 00 00 60 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fe ff ff ff 00 00 ce 23 ff df ef ff
> 90: 00 00 ff 3f 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 23 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 0f 00 20 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 24 e0 00
> f0: 00 00 00 00 00 00 00 00 02 00 0c 00 00 00 00 00
>
> 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller 
> [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin B routed to IRQ 19
>         Region 0: I/O ports at 34e8 [size=8]
>         Region 1: I/O ports at 34dc [size=4]
>         Region 2: I/O ports at 34e0 [size=8]
>         Region 3: I/O ports at 34d8 [size=4]
>         Region 4: I/O ports at 34a0 [size=16]
>         Region 5: Memory at a0007000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>         Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: e9 34 00 00 dd 34 00 00 e1 34 00 00 d9 34 00 00
> 20: a1 34 00 00 00 70 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 ef ff ff ff 00 00 05 12 bf ff ff fd
> 90: 00 00 bb 34 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 07
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller 
> [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (750ns min, 250ns max)
>         Interrupt: pin C routed to IRQ 18
>         Region 0: I/O ports at 3800 [size=8]
>         Region 1: I/O ports at 34f4 [size=4]
>         Region 2: I/O ports at 34f8 [size=8]
>         Region 3: I/O ports at 34f0 [size=4]
>         Region 4: I/O ports at 34b0 [size=16]
>         Region 5: Memory at a0008000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>         Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: 01 38 00 00 f5 34 00 00 f9 34 00 00 f1 34 00 00
> 20: b1 34 00 00 00 80 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fb ff ff ed 00 00 bf 0e bf ff 67 ff
> 90: 00 00 45 29 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 a0 07
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 02
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge 
> [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: a0100000-a01fffff
>         Prefetchable memory behind bridge: fff00000-000fffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- <SERR- <PERR-
>     BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>             PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
>     Capabilities: [b8] Subsystem: nVidia Corporation Device 
>
> [10de:cb84]
>         Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
>                 Mapping Address Base: 00000000fee00000
> 00: de 10 70 03 07 00 b0 00 a2 01 04 06 00 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 02
> 20: 10 a0 10 a0 f0 ff 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 0a
> 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 44 00
> 50: 00 00 fe 8f 00 00 00 00 ff 1f ff 1f 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 fe 6f 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
> 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
> c0: de 10 84 cb 07 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition 
> Audio [10de:0371] (rev a2)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (500ns min, 1250ns max)
>         Interrupt: pin B routed to IRQ 20
>         Region 0: Memory at a0000000 (32-bit, non-prefetchable) 
> [size=16K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>                 Address: 0000000000000000  Data: 0000
>                 Masking: 00000000  Pending: 00000000
>         Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>         Kernel driver in use: HDA Intel
> 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
> 10: 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05
> 40: f1 10 15 29 01 50 02 c0 00 00 00 00 01 01 0f 00
> 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 47 00 29 00 00 00 00 00 00
>
> 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] 
> (rev a3)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (250ns min, 5000ns max)
>         Interrupt: pin A routed to IRQ 52
>         Region 0: Memory at a0009000 (32-bit, non-prefetchable) [size=4K]
>         Region 1: I/O ports at 3808 [size=8]
>         Region 2: Memory at a0005800 (32-bit, non-prefetchable) 
> [size=256]
>         Region 3: Memory at a0005400 (32-bit, non-prefetchable) [size=16]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
>         Capabilities: [70] MSI-X: Enable- Count=8 Masked-
>                 Vector table: BAR=2 offset=00000000
>                 PBA: BAR=3 offset=00000000
>         Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
>                 Address: 00000000fee0f00c  Data: 41b1
>                 Masking: 000000fe  Pending: 00000000
>         Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>         Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 90 00 a0 09 38 00 00 00 58 00 a0 00 54 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b1 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] 
> (rev a3)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0 (250ns min, 5000ns max)
>         Interrupt: pin A routed to IRQ 53
>         Region 0: Memory at a000b000 (32-bit, non-prefetchable) [size=4K]
>         Region 1: I/O ports at 3810 [size=8]
>         Region 2: Memory at a000a000 (32-bit, non-prefetchable) 
> [size=256]
>         Region 3: Memory at a0005c00 (32-bit, non-prefetchable) [size=16]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
>         Capabilities: [70] MSI-X: Enable- Count=8 Masked-
>                 Vector table: BAR=2 offset=00000000
>                 PBA: BAR=3 offset=00000000
>         Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
>                 Address: 00000000fee0f00c  Data: 41b9
>                 Masking: 000000fe  Pending: 00000000
>         Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>         Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 b0 00 a0 11 38 00 00 00 a0 00 a0 00 5c 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b9 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge 
> [10de:0378] (rev a3) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
>         I/O behind bridge: 00004000-00004fff
>         Memory behind bridge: a0200000-a03fffff
>         Prefetchable memory behind bridge: 
> 00000000a4000000-00000000a5ffffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Subsystem: nVidia Corporation Device 
> [10de:0000]
>         Capabilities: [48] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>                 Address: 00000000fee0f00c  Data: 4151
>         Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>                 Mapping Address Base: 00000000fee00000
>         Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, 
> Latency L0 <512ns, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- 
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
> HotPlug- Surpise-
>                         Slot #  0, PowerLimit 0.000000; Interlock- 
> NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- 
> CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Off, PwrInd On, Power- 
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
> PresDet+ Interlock-
>                         Changed: MRL- PresDet+ LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [160] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- 
> ChkCap+ ChkEn-
>         Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 04 00 41 41 00 00
> 20: 20 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge 
> [10de:0377] (rev a3) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>         I/O behind bridge: 00005000-00005fff
>         Memory behind bridge: a1000000-a2ffffff
>         Prefetchable memory behind bridge: 
> 00000000b0000000-00000000bfffffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Subsystem: nVidia Corporation Device 
> [10de:0000]
>         Capabilities: [48] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>                 Address: 00000000fee0f00c  Data: 4159
>         Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>                 Mapping Address Base: 00000000fee00000
>         Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s 
> L1, Latency L0 <512ns, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- 
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
> HotPlug- Surpise-
>                         Slot #  0, PowerLimit 0.000000; Interlock- 
> NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- 
> CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Off, PwrInd On, Power- 
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
> PresDet+ Interlock-
>                         Changed: MRL- PresDet+ LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [160] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- 
> ChkCap+ ChkEn-
>         Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 05 05 00 51 51 00 00
> 20: 00 a1 f0 a2 01 b0 f1 bf 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0c 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Capabilities: [80] HyperTransport: Host or Secondary Interface
>                 Command: WarmRst+ DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- <EOCErr- DUL-
>                 Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Revision ID: 1.02
>                 Link Frequency: 1.0GHz
>                 Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD- ExtRS- UCnfE-
>         Capabilities: [a0] HyperTransport: Host or Secondary Interface
>                 Command: WarmRst+ DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- <EOCErr- DUL-
>                 Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Revision ID: 1.02
>                 Link Frequency: 1.0GHz
>                 Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD- ExtRS- UCnfE-
>         Capabilities: [c0] HyperTransport: Host or Secondary Interface
>                 Command: WarmRst+ DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- <EOCErr- DUL-
>                 Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Revision ID: 1.02
>                 Link Frequency: 1.0GHz
>                 Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 01 03 00 02 04 01 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 10 00 03 00 e4 02 00 00 20 c8 0e 0f 30 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 69 01 61 01 00 00 7f 00 07 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] Address Map [1022:1101]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 01 70 00 90 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] DRAM Controller [1022:1102]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
> 80: 22 00 00 00 00 00 00 00 24 a2 68 cf 20 13 92 00
> 90: 10 08 08 00 5a 90 40 64 39 00 00 80 00 00 00 00
> a0: 49 03 00 cf 00 00 00 00 00 00 00 00 00 00 00 00
> b0: fb 9d eb cc 89 00 00 00 68 1c 1f e8 3f c0 e7 ff
> c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 3f 4c 9f 36 1c bd 36 8b fd 8e ce 1e 2f 9e 6e b4
> e0: 15 6e 8f 90 86 9d 96 81 7f ce 4e 9e 3f bb 2f 94
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Capabilities: [f0] Secure device <?>
>         Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 d0 0a 00 00 00 00 00 00 00 00
> 50: 08 12 f0 71 e9 00 00 00 00 00 00 00 00 26 00 00
> 60: 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 10 d4 fa df 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 26 26 25 00
> e0: 00 00 00 00 24 18 5d 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 04 00 00 02 00 00 00 12 0f 04 00
>
> 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Capabilities: [80] HyperTransport: Host or Secondary Interface
>                 Command: WarmRst+ DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- <EOCErr- DUL-
>                 Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Revision ID: 1.02
>                 Link Frequency: 1.0GHz
>                 Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD- ExtRS- UCnfE-
>         Capabilities: [a0] HyperTransport: Host or Secondary Interface
>                 Command: WarmRst+ DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- <EOCErr- DUL-
>                 Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Revision ID: 1.02
>                 Link Frequency: 1.0GHz
>                 Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD- ExtRS- UCnfE-
>         Capabilities: [c0] HyperTransport: Host or Secondary Interface
>                 Command: WarmRst+ DblEnd- DevNum=0 ChainSide- 
> HostHide+ Slave- <EOCErr- DUL-
>                 Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Revision ID: 1.02
>                 Link Frequency: 1.0GHz
>                 Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 
> 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 04 08 01 00 01 01 05 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 11 00 03 00 e4 00 00 00 20 c8 0e 0f 1c 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 69 01 61 01 00 80 ff 00 07 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] Address Map [1022:1101]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] DRAM Controller [1022:1102]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 00
> 90: 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 96 8a bb cd 1f 00 00 00 01 1e 0f 08 bd 50 76 57
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 1d 7b 36 67 30 87 df 7e 02 18 72 9f 8c 39 fd 74
> e0: 0d 17 3e a3 1a c3 ff 36 c1 5c 38 df cc 19 dd 72
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Capabilities: [f0] Secure device <?>
>         Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 50 0a 00 00 00 00 00 00 00 00
> 50: 00 d0 01 c8 c7 00 00 00 00 00 00 00 00 00 00 84
> 60: 20 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 80 fe ff fb 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 25 26 26 00
> e0: 00 00 00 00 24 18 58 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00
>
> 01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A 
> IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>     Interrupt: pin A routed to IRQ 21
>     Region 0: Memory at a0104000 (32-bit, non-prefetchable) [size=2K]
>     Region 1: Memory at a0100000 (32-bit, non-prefetchable) 
>
> [size=16K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>         Kernel driver in use: ohci1394
> 00: 4c 10 23 80 16 00 10 02 00 10 00 0c 10 40 00 00
> 10: 00 40 10 a0 00 00 10 a0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
> 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
> f0: 10 00 00 00 82 10 00 00 f1 10 15 29 00 00 00 00
>
> 02:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - 
> PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=02, secondary=03, subordinate=03, sec-latency=68
>         I/O behind bridge: 00004000-00004fff
>         Memory behind bridge: a0300000-a03fffff
>         Prefetchable memory behind bridge: 
> 00000000a4000000-00000000a5ffffff
>         Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- 
> BrConfRtry-
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ 
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> Latency L0 <4us, L1 <16us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- 
> SlotClk- DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [54] PCI-X bridge device
>                 Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- 
> Freq=133MHz
>                 Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>                 Upstream: Capacity=32 CommitmentLimit=32
>                 Downstream: Capacity=16 CommitmentLimit=16
>         Capabilities: [64] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA 
> PME(D0+,D1+,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>                 Bridge: PM- B3+
>         Capabilities: [100] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 AERCap: First Error Pointer: 14, GenCap+ CGenEn- 
> ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 02 03 03 44 41 41 20 04
> 20: 30 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 0a 00 81 6c 02 00
> 50: 00 00 41 00 07 64 c3 00 00 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 1f 3f 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 02:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - 
> PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Region 0: Memory at a0200000 (64-bit, non-prefetchable) 
> [size=128]
>         Bus: primary=02, secondary=04, subordinate=04, sec-latency=4
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: fff00000-000fffff
>         Prefetchable memory behind bridge: 
> 00000000fff00000-00000000000fffff
>         Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- 
> BrConfRtry-
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> Latency L0 <4us, L1 <16us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- 
> SlotClk- DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [54] PCI-X bridge device
>                 Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- 
> Freq=conv
>                 Status: Dev=02:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
>                 Upstream: Capacity=32 CommitmentLimit=32
>                 Downstream: Capacity=16 CommitmentLimit=16
>         Capabilities: [64] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA 
> PME(D0+,D1+,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>                 Bridge: PM- B3+
>         Capabilities: [6c] MSI: Enable- Count=1/1 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [7c] Hot-plug capable
>         Capabilities: [100] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- 
> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
> NonFatalErr-
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- 
> ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 04 00 20 a0 00 00 00 00 02 04 04 04 f1 01 20 24
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 00 00 81 6c 02 00
> 50: 00 00 41 00 07 64 03 00 01 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 03:09.0 RAID bus controller [0104]: 3ware Inc 9550SX SATA-II RAID 
> PCI-X [13c1:1003]
>         Subsystem: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 64 (16000ns min), Cache Line Size: 64 bytes
>     Interrupt: pin A routed to IRQ 17
>     Region 0: Memory at a4000000 (64-bit, prefetchable) [size=32M]
>     Region 2: Memory at a0300000 (64-bit, non-prefetchable) [size=4K]
>     Region 4: I/O ports at 4000 [size=64]
>     [virtual] Expansion ROM at a0320000 [disabled] [size=128K]
>     Capabilities: [e0] PCI-X non-bridge device
>             Command: DPERE- ERO+ RBC=512 OST=3
>             Status: Dev=03:09.0 64bit+ 133MHz+ SCD- USC- DC=simple 
>
> DMMRBC=512 DMOST=3 DMCRS=16 RSCEM- 266MHz- 533MHz-
>         Capabilities: [e8] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [f0] MSI: Enable- Count=1/8 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Kernel driver in use: 3w-9xxx
> 00: c1 13 03 10 17 00 b0 02 00 00 04 01 10 40 00 00
> 10: 0c 00 00 a4 00 00 00 00 04 00 30 a0 00 00 00 00
> 20: 01 40 00 00 00 00 00 00 00 00 00 00 c1 13 03 10
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 0a 01 40 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 82
> 50: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 07 e8 22 00 48 03 03 05 01 f0 02 06 00 00 00 00
> f0: 05 00 86 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 05:00.0 VGA compatible controller [0300]: nVidia Corporation G73 
> [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA controller])
>         Subsystem: ASUSTeK Computer Inc. Device [1043:81f7]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 22
>         Region 0: Memory at a2000000 (32-bit, non-prefetchable) 
> [size=16M]
>         Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
>         Region 3: Memory at a1000000 (64-bit, non-prefetchable) 
> [size=16M]
>         Region 5: I/O ports at 5000 [size=128]
>         Expansion ROM at <unassigned> [disabled]
>         Capabilities: [60] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [78] Express (v1) Endpoint, MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
> <1us, L1 <4us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s 
> L1, Latency L0 <1us, L1 <4us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- 
> Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- 
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [128] Power Budgeting <?>
>         Kernel driver in use: nvidia
> 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00
> 10: 00 00 00 a2 0c 00 00 b0 00 00 00 00 04 00 00 a1
> 20: 00 00 00 00 01 50 00 00 00 00 00 00 43 10 f7 81
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 01 00 00 05 00 00
> 80: 10 28 00 00 01 4d 01 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller 
> [10de:0369] (rev a2)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Capabilities: [44] HyperTransport: Slave or Primary Interface
>                 Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>                 Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- 
> TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>                 Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                 Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ 
> TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                 Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- 
> LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>                 Revision ID: 1.03
>                 Link Frequency 0: 1.0GHz
>                 Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 
> 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 
> 64bA- UIDRD-
>                 Link Frequency 1: 200MHz
>                 Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>                 Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 
> 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                 Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- 
> CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>                 Prefetchable memory behind bridge Upper: 00-00
>                 Bus Number: 00
>         Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>                 Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge 
> [10de:0361] (rev a3)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Region 0: I/O ports at 2c00 [size=128]
>         Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
> 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
> 10: 01 2c 00 00 00 00 00 c0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> 40: f1 10 15 29 00 00 00 00 fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
> 70: 10 00 ff ff 43 00 00 00 00 00 42 20 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
> 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 80:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
>         Subsystem: Tyan Computer Device [10f1:2915]
>         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 255
>         Region 0: I/O ports at 6000 [size=64]
>         Region 4: I/O ports at 6440 [size=64]
>         Region 5: I/O ports at 6400 [size=64]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 64 00 00 01 64 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 f0 00 00 01 f4 00 00 01 f8 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 c0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: e6 16 05 00 a5 03 50 07 80 ff f7 00 61 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 80:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge 
> [10de:0378] (rev a3) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: fff00000-000fffff
>         Prefetchable memory behind bridge: 
> 00000000fff00000-00000000000fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Subsystem: nVidia Corporation Device 
> [10de:0000]
>         Capabilities: [48] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>                 Address: 00000000fee0f00c  Data: 4161
>         Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>                 Mapping Address Base: 00000000fee00000
>         Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, 
> Latency L0 <512ns, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- 
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
> HotPlug- Surpise-
>                         Slot #  0, PowerLimit 0.000000; Interlock- 
> NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- 
> CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Off, PwrInd On, Power- 
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
> PresDet- Interlock-
>                         Changed: MRL- PresDet- LinkState-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 81 81 00 f1 01 00 00
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 10 00 00 00 00 c0 01 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge 
> [10de:0377] (rev a3) (prog-if 00 [Normal decode])
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: c1000000-c2ffffff
>         Prefetchable memory behind bridge: 
> 00000000d0000000-00000000dfffffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Subsystem: nVidia Corporation Device 
> [10de:0000]
>         Capabilities: [48] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>                 Address: 00000000fee0f00c  Data: 4169
>         Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>                 Mapping Address Base: 00000000fee00000
>         Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s 
> L1, Latency L0 <512ns, L1 <4us
>                         ClockPM- Surprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- 
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- 
> HotPlug- Surpise-
>                         Slot #  0, PowerLimit 0.000000; Interlock- 
> NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- 
> CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Off, PwrInd On, Power- 
> Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- 
> PresDet+ Interlock-
>                         Changed: MRL- PresDet+ LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- 
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 82 82 00 f1 01 00 00
> 20: 00 c1 f0 c2 01 d0 f1 df 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 69 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 82:00.0 VGA compatible controller [0300]: nVidia Corporation NV38GL 
> [Quadro FX 1300] [10de:00fe] (rev a2) (prog-if 00 [VGA controller])
>         Subsystem: nVidia Corporation Device [10de:0238]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 10
>         Region 0: Memory at c2000000 (32-bit, non-prefetchable) 
> [size=16M]
>         Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>         Region 2: Memory at c1000000 (32-bit, non-prefetchable) 
> [size=16M]
>         Capabilities: [60] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [78] Express (v1) Legacy Endpoint, MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
> <512ns, L1 <4us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- 
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, 
> Latency L0 <2us, L1 <16us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- 
> Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- 
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 00: de 10 fe 00 07 00 10 00 a2 00 00 03 10 00 00 00
> 10: 00 00 00 c2 08 00 00 d0 00 00 00 c1 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 38 02
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 11 00 c0 04 00 00
> 80: 10 28 00 00 01 55 02 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 0c 08 40 c1 01 04 40 c1
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> superiotool r
> Probing for ALi Super I/O at 0x3f0...
>   Failed. Returned data: id=0x0000, rev=0x00
> Probing for ALi Super I/O at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
>   Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
>   Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=standard) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
> No dump available for this Super I/O
> No extra registers known for this chip.
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
>   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x88) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> i15@sapien
> Nicolas AVELINE wrote:
> > Hello !
> >
> > my tyan :
> >
> > S2915-E AS#408544-004
> >
> > root@Serveur:~# flashrom -V*
> > flashrom v0.9.1-r877
> > No coreboot table found.
> > DMI string 0: "Hewlett-Packard"
> > DMI string 1: "HP xw9400 Workstation"
> > DMI string 2: " "
> > DMI string 3: "Hewlett-Packard"
> > DMI string 4: "0A1Ch"
> > DMI string 5: "E"
> > Found chipset "NVIDIA MCP55", enabling flash write... OK.
> > This chipset supports the following protocols: Non-SPI.
> > Calibrating delay loop... 478M loops per second, 100 myus = 255 us. OK.
> > Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x24, id2 0x50
> > Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> > Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> > Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x41, id2 
> > 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> > Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0x41, id2 0x4d
> > Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xe9, id2 
> > 0x6d, id1 is normal flash content, id2 is normal flash content
> > Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x24, 
> > id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xe9, id2 
> > 0x6d, id1 is normal flash content, id2 is normal flash content
> > Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> > Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> > Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> > Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 
> > 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, 
> > id2 is normal flash content
> > Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 
> > 0xff, id2 0xd3, id1 parity violation, id1 is normal flash content, 
> > id2 is normal flash content
> > Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 
> > 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, 
> > id2 is normal flash content
> > Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 
> > 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, 
> > id2 is normal flash content
> > Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, 
> > id2 0xff
> > Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, 
> > id2 0xff
> > Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x24, 
> > id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x24, 
> > id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
> > Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
> > Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x24, id2 0x50
> > Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x24, id2 0x50
> > Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> > Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xff, id2 0xd3
> > Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xff, id2 0xff
> > Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
> > Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0xff, id2 0xd3
> > Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x24, id2 
> > 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
> > Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff
> > Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x24, id2 
> > 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x24, id2 
> > 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x24, 
> > id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xe9, id2 
> > 0x6d, id1 is normal flash content, id2 is normal flash content
> > Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x24, id2 
> > 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x41, 
> > id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> > Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0x41, 
> > id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x41, id2 0x4d
> > Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> > Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0x41, 
> > id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> > Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and 
> > chip bus type SPI are incompatible.
> > Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xff, id2 0xff
> > Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff
> > Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x24, id2 
> > 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0x41, 
> > id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0x41, 
> > id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xd3
> > Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> > Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
> > Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x41, id2 0x4d
> > Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2 
> > 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x24, 
> > id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 
> > 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI 
> > and chip bus type SPI are incompatible.
> > Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x24, 
> > id2 0x50, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond 
> > W29EE011 because the probing sequence puts the AMIC A49LF040A in a 
> > funky state. Use 'flashrom -c W29EE011' if you have a board with this 
> > chip.
> > Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing 
> > information, using default 10mS/40uS. probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xff, 
> > id2 0xff, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0x41, 
> > id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, 
> > id2 0xd3, id1 parity violation, id1 is normal flash content, id2 is 
> > normal flash content
> > Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe 
> > timing information, using default 10mS/40uS. probe_jedec_common: id1 
> > 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, 
> > id2 is normal flash content
> > Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct 
> > probe timing information, using default 10mS/40uS. 
> > probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is 
> > normal flash content, id2 is normal flash content
> > Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus 
> > type Non-SPI and chip bus type SPI are incompatible.
> > Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host 
> > bus type Non-SPI and chip bus type SPI are incompatible.
> > Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type 
> > Non-SPI and chip bus type SPI are incompatible.
> > Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus 
> > type Non-SPI and chip bus type SPI are incompatible.
> > Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus 
> > type Non-SPI and chip bus type SPI are incompatible.
> > Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus 
> > type Non-SPI and chip bus type SPI are incompatible.
> > No EEPROM/flash device found.
> > If you know which flash chip you have, and if this version of flashrom
> > supports a similar flash chip, you can try to force read your chip. Run:
> > flashrom -f -r -c similar_supported_flash_chip filename
> >
> > Note: flashrom can never write when the flash chip isn't found 
> > automatically.
> >
> > *root@Serveur:~# superiotool -deV*
> > superiotool r3844
> > Probing for ALi Super I/O at 0x3f0...
> >   Failed. Returned data: id=0x0000, rev=0x00
> > Probing for ALi Super I/O at 0x370...
> >   Failed. Returned data: id=0xffff, rev=0xff
> > Probing for Fintek Super I/O at 0x2e...
> >   Failed. Returned data: vid=0x0400, id=0x0081
> > Probing for Fintek Super I/O at 0x4e...
> >   Failed. Returned data: vid=0xffff, id=0xffff
> > Probing for ITE Super I/O (init=standard) at 0x2e...
> >   Failed. Returned data: id=0x8100, rev=0x1
> > Probing for ITE Super I/O (init=it8761e) at 0x2e...
> >   Failed. Returned data: id=0x8100, rev=0x1
> > Probing for ITE Super I/O (init=it8228e) at 0x2e...
> >   Failed. Returned data: id=0x8100, rev=0x1
> > Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
> >   Failed. Returned data: id=0x8100, rev=0x1
> > Probing for ITE Super I/O (init=standard) at 0x4e...
> >   Failed. Returned data: id=0xffff, rev=0xf
> > Probing for ITE Super I/O (init=it8761e) at 0x4e...
> >   Failed. Returned data: id=0xffff, rev=0xf
> > Probing for ITE Super I/O (init=it8228e) at 0x4e...
> >   Failed. Returned data: id=0xffff, rev=0xf
> > Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
> >   Failed. Returned data: id=0xffff, rev=0xf
> > Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
> >   Failed. Returned data: id=0xffff, rev=0xf
> > Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
> >   Failed. Returned data: id=0xffff, rev=0xf
> > Probing for NSC Super I/O at 0x2e...
> >   Failed. Returned data: port=0xff, port+1=0xff
> > Probing for NSC Super I/O at 0x4e...
> >   Failed. Returned data: port=0xff, port+1=0xff
> > Probing for NSC Super I/O at 0x15c...
> >   Failed. Returned data: port=0xff, port+1=0xff
> > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> > Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
> > No dump available for this Super I/O
> > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
> >   Failed. Returned data: id=0x00, rev=0x00
> > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
> > Found SMSC FDC37N972 (id=0x0b, rev=0x00) at 0x4e
> > Register dump:
> > idx 02 20 21 22 23 24 25 26  27 28 29 2a 2b 2c 2d 2e  2f
> > val 00 0b 00 00 00 00 00 4e  00 00 00 00 00 00 00 00  00
> > def 00 0b 00 00 00 04 04 NA  NA 00 00 00 00 00 00 00  00
> > LDN 0x00 (Floppy)
> > idx 30 60 61 70 74 f0 f1 f2  f3 f4 f5
> > val 01 04 c0 00 00 00 d1 15  0b 00 10
> > def 00 03 f0 06 02 0e 00 ff  RR 00 00
> > LDN 0x01 (Power Management (PM1))
> > idx 30 60 61
> > val 01 04 c0
> > def 00 00 00
> > LDN 0x03 (Parallel port)
> > idx 30 60 61 70 74 f0 f1
> > val 01 04 c0 00 00 00 d1
> > def 00 00 00 00 04 3c 00
> > LDN 0x04 (COM1)
> > idx 30 60 61 70 f0
> > val 01 04 c0 00 00
> > def 00 00 00 00 00
> > LDN 0x05 (COM2)
> > idx 30 60 61 62 63 70 74 f0  f1 f2 f7 f8
> > val 01 04 c0 00 00 00 00 00  d1 15 00 00
> > def 00 00 00 00 00 00 04 00  02 03 00 00
> > LDN 0x06 (Real-time clock (RTC))
> > idx 30 60 61 62 63 70 f0 f1
> > val 01 04 c0 00 00 00 00 d1
> > def 00 00 70 00 74 00 00 NA
> > LDN 0x07 (Keyboard)
> > idx 30 60 61 70 72 f0
> > val 01 04 c0 00 00 00
> > def 00 00 00 00 00 00
> > LDN 0x08 (Embedded Controller (EC))
> > idx 30 60 61
> > val 01 04 c0
> > def 00 00 62
> > LDN 0x09 (Mailbox)
> > idx 30 60 61
> > val 01 04 c0
> > def 00 00 00
> > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
> >   Failed. Returned data: id=0x00, rev=0x00
> > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
> >   Failed. Returned data: id=0xff, rev=0xff
> > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
> >   Failed. Returned data: id=0xff, rev=0xff
> > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
> >   Failed. Returned data: id=0xff, rev=0xff
> > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
> >   Failed. Returned data: id=0xff, rev=0xff
> > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
> >   Failed. Returned data: id=0x00, rev=0x00
> > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
> >   Failed. Returned data: id=0x00, rev=0x00
> > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
> >   Failed. Returned data: id=0xff, rev=0xff
> > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
> >   Failed. Returned data: id=0xff, rev=0xff
> > Probing for Winbond Super I/O (init=0x88) at 0x2e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x89) at 0x2e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x88) at 0x4e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x89) at 0x4e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x88) at 0x3f0...
> >   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> > Probing for Winbond Super I/O (init=0x89) at 0x3f0...
> >   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> > Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
> >   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> > Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
> >   Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> > Probing for Winbond Super I/O (init=0x88) at 0x370...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x89) at 0x370...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x88) at 0x250...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x89) at 0x250...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> > Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
> >   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> >
> > *root@Serveur:~# lspci -nnvvvxxx*
> > 0000:00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory 
> > Controller [10de:0369] (rev a2)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0
> >     Capabilities: [44] HyperTransport: Slave or Primary Interface
> >         Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> >         Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> > LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> >         Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
> > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> >         Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
> > DwFcInEn- LWO=8bit DwFcOutEn-
> >         Revision ID: 1.03
> >         Link Frequency 0: 1.0GHz
> >         Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> >         Link Frequency 1: 200MHz
> >         Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
> > 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
> > SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> >         Prefetchable memory behind bridge Upper: 00-00
> >         Bus Number: 00
> >     Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
> >         Mapping Address Base: 00000000fee00000
> > 00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
> > 40: 3c 10 fe 12 08 dc e0 01 22 20 11 11 d0 00 00 00
> > 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
> > 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> > 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> > 90: 78 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> > c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> > e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge 
> > [10de:0364] (rev a3)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0
> > 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> > 40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 de fd 00 00
> > 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
> > 70: 10 00 ff ff c1 80 00 00 00 00 64 19 03 00 00 10
> > 80: 09 c0 00 2d 16 24 00 80 ff 00 00 01 ff 00 00 00
> > 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> > a0: a3 00 10 10 00 00 00 00 00 04 cb 04 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 50 28 00 fe fd e1 00 b0
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
> >
> > 0000:00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] 
> > (rev a3)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Interrupt: pin A routed to IRQ 10
> >     Region 4: I/O ports at 3000 [size=64]
> >     Region 5: I/O ports at 3040 [size=64]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: nForce2_smbus
> >     Kernel modules: i2c-nforce2
> > 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 01 30 00 00 41 30 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 00 00
> > 40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 01 f8 00 00 01 f9 00 00 01 fa 00 00 00 f0 ef fd
> > 70: 01 00 00 00 00 00 e0 fc 00 00 00 00 01 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 64 15 05 00 b5 03 00 07 80 30 00 00 77 44 44 11
> > f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
> >
> > 0000:00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB 
> > Controller [10de:036c] (rev a1) (prog-if 10)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (750ns min, 250ns max)
> >     Interrupt: pin A routed to IRQ 18
> >     Region 0: Memory at fce44000 (32-bit, non-prefetchable) [size=4K]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: ohci_hcd
> > 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
> > 10: 00 40 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
> > 40: 3c 10 fe 12 01 00 02 fe 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
> >
> > 0000:00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB 
> > Controller [10de:036d] (rev a2) (prog-if 20)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (750ns min, 250ns max)
> >     Interrupt: pin B routed to IRQ 19
> >     Region 0: Memory at fce4a000 (32-bit, non-prefetchable) [size=256]
> >     Capabilities: [44] Debug port: BAR=1 offset=0098
> >     Capabilities: [80] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: ehci_hcd
> > 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
> > 10: 00 a0 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
> > 40: 3c 10 fe 12 0a 80 98 20 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
> > 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 64 00
> > 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
> > 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
> > b0: 44 44 00 00 00 00 00 00 ff 03 00 00 00 00 00 00
> > c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
> >
> > 0000:00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE 
> > [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (750ns min, 250ns max)
> >     Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
> > [disabled] [size=8]
> >     Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
> > [disabled] [size=1]
> >     Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
> > [disabled] [size=8]
> >     Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
> > [disabled] [size=1]
> >     Region 4: I/O ports at 3080 [size=16]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: pata_amd
> > 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 81 30 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
> > 40: 3c 10 fe 12 01 00 02 00 00 00 00 00 00 00 00 00
> > 50: 02 80 00 00 00 00 00 00 99 99 20 20 0a 00 a8 20
> > 60: 00 00 c4 c6 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 c0 91 e7 00 00 02 34 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
> >
> > 0000:00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA 
> > Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (750ns min, 250ns max)
> >     Interrupt: pin A routed to IRQ 22
> >     Region 0: I/O ports at 30c0 [size=8]
> >     Region 1: I/O ports at 3100 [size=4]
> >     Region 2: I/O ports at 30c8 [size=8]
> >     Region 3: I/O ports at 3104 [size=4]
> >     Region 4: I/O ports at 3090 [size=16]
> >     Region 5: Memory at fce45000 (32-bit, non-prefetchable) [size=4K]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/2 Enable-
> >         Address: 0000000000000000  Data: 0000
> >     Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
> >     Kernel driver in use: sata_nv
> > 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> > 10: c1 30 00 00 01 31 00 00 c9 30 00 00 05 31 00 00
> > 20: 91 30 00 00 00 50 e4 fc 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
> > 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
> > 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> > 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> > 80: 00 00 00 c0 d7 fb c7 bb 00 00 0b 03 fd bc 0e 6f
> > 90: 00 00 ff 3d 00 00 00 00 06 00 06 10 7f 03 01 01
> > a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> > b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
> > d0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 00 e0 07
> > e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 10 00
> > f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
> >
> > 0000:00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA 
> > Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (750ns min, 250ns max)
> >     Interrupt: pin B routed to IRQ 21
> >     Region 0: I/O ports at 30d0 [size=8]
> >     Region 1: I/O ports at 3108 [size=4]
> >     Region 2: I/O ports at 30d8 [size=8]
> >     Region 3: I/O ports at 310c [size=4]
> >     Region 4: I/O ports at 30a0 [size=16]
> >     Region 5: Memory at fce46000 (32-bit, non-prefetchable) [size=4K]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/2 Enable-
> >         Address: 0000000000000000  Data: 0000
> >     Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
> >     Kernel driver in use: sata_nv
> > 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> > 10: d1 30 00 00 09 31 00 00 d9 30 00 00 0d 31 00 00
> > 20: a1 30 00 00 00 60 e4 fc 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
> > 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
> > 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> > 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> > 80: 00 00 00 c0 6f fd 7f bb 00 00 0f 03 fb f7 f8 73
> > 90: 00 00 23 3f 00 00 00 00 06 00 06 10 7f 03 01 01
> > a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> > b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
> > d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 00
> > e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 a1 80 02
> > f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00
> >
> > 0000:00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA 
> > Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (750ns min, 250ns max)
> >     Interrupt: pin C routed to IRQ 20
> >     Region 0: I/O ports at 30e0 [size=8]
> >     Region 1: I/O ports at 3110 [size=4]
> >     Region 2: I/O ports at 30e8 [size=8]
> >     Region 3: I/O ports at 3114 [size=4]
> >     Region 4: I/O ports at 30b0 [size=16]
> >     Region 5: Memory at fce47000 (32-bit, non-prefetchable) [size=4K]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/2 Enable-
> >         Address: 0000000000000000  Data: 0000
> >     Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
> >     Kernel driver in use: sata_nv
> > 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> > 10: e1 30 00 00 11 31 00 00 e9 30 00 00 15 31 00 00
> > 20: b1 30 00 00 00 70 e4 fc 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
> > 40: 3c 10 fe 12 01 b0 02 00 00 00 00 00 00 00 00 00
> > 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> > 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> > 80: 00 00 00 c0 be 7d fb fc 00 00 eb 12 0c bd f7 bd
> > 90: 00 00 92 18 00 00 00 00 06 00 06 10 7f 03 01 01
> > a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> > b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8
> > d0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 03 00 04
> > e0: 0a 00 02 76 42 00 00 00 00 00 00 00 00 00 f0 07
> > f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00
> >
> > 0000:00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge 
> > [10de:0370] (rev a2) (prog-if 01)
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0
> >     Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> >     I/O behind bridge: 0000f000-00000fff
> >     Memory behind bridge: fc400000-fccfffff
> >     Prefetchable memory behind bridge: f8000000-f80fffff
> >     Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> > <TAbort- <MAbort- <SERR- <PERR-
> >     BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> >         PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
> >     Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
> >     Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
> >         Mapping Address Base: 00000000fee00000
> > 00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00
> > 10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 02
> > 20: 40 fc c0 fc 00 f8 00 f8 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 0a 0a
> > 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00
> > 50: 00 00 fe ef 00 00 00 00 ff 1f ff 1f 03 00 84 00
> > 60: 00 00 85 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 fe 0f 01 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
> > 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 06 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
> > b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
> > c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:06.1 Audio device [0403]: nVidia Corporation MCP55 High 
> > Definition Audio [10de:0371] (rev a2)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (500ns min, 1250ns max)
> >     Interrupt: pin B routed to IRQ 22
> >     Region 0: Memory at fce40000 (32-bit, non-prefetchable) [size=16K]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
> > Queue=0/0 Enable-
> >         Address: 0000000000000000  Data: 0000
> >         Masking: 00000000  Pending: 00000000
> >     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
> >     Kernel driver in use: HDA Intel
> >     Kernel modules: snd-hda-intel
> > 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
> > 10: 00 00 e4 fc 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 02 05
> > 40: 3c 10 fe 12 01 50 02 c0 00 00 00 00 01 01 0f 00
> > 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 02 a8
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00
> >
> > 0000:00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet 
> > [10de:0373] (rev a3)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx+
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (250ns min, 5000ns max)
> >     Interrupt: pin A routed to IRQ 50
> >     Region 0: Memory at fce48000 (32-bit, non-prefetchable) [size=4K]
> >     Region 1: I/O ports at 30f0 [size=8]
> >     Region 2: Memory at fce4a100 (32-bit, non-prefetchable) [size=256]
> >     Region 3: Memory at fce4a300 (32-bit, non-prefetchable) [size=16]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >         Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
> >     Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
> >         Vector table: BAR=2 offset=00000000
> >         PBA: BAR=3 offset=00000000
> >     Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
> > Queue=0/3 Enable+
> >         Address: 00000000feeff00c  Data: 41a1
> >         Masking: 000000fe  Pending: 00000000
> >     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
> >     Kernel driver in use: forcedeth
> >     Kernel modules: forcedeth
> > 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> > 10: 00 80 e4 fc f1 30 00 00 00 a1 e4 fc 00 a3 e4 fc
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
> > 40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 01 00 00 00
> > 50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a1 41 00 00
> > 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
> > 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
> >
> > 0000:00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet 
> > [10de:0373] (rev a3)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx+
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0 (250ns min, 5000ns max)
> >     Interrupt: pin A routed to IRQ 51
> >     Region 0: Memory at fce49000 (32-bit, non-prefetchable) [size=4K]
> >     Region 1: I/O ports at 30f8 [size=8]
> >     Region 2: Memory at fce4a200 (32-bit, non-prefetchable) [size=256]
> >     Region 3: Memory at fce4a310 (32-bit, non-prefetchable) [size=16]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >         Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
> >     Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
> >         Vector table: BAR=2 offset=00000000
> >         PBA: BAR=3 offset=00000000
> >     Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ 
> > Queue=0/3 Enable+
> >         Address: 00000000feeff00c  Data: 41a9
> >         Masking: 000000fe  Pending: 00000000
> >     Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
> >     Kernel driver in use: forcedeth
> >     Kernel modules: forcedeth
> > 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> > 10: 00 90 e4 fc f9 30 00 00 00 a2 e4 fc 10 a3 e4 fc
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
> > 40: 3c 10 fe 12 01 70 02 fe 00 01 00 00 00 00 00 00
> > 50: 05 6c 87 01 0c f0 ef fe 00 00 00 00 a9 41 00 00
> > 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 02 a8
> > 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00
> >
> > 0000:00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express 
> > bridge [10de:0378] (rev a3)
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0, Cache Line Size: 64 bytes
> >     Bus: primary=00, secondary=2b, subordinate=2d, sec-latency=0
> >     I/O behind bridge: 0000f000-00000fff
> >     Memory behind bridge: fcd00000-fcdfffff
> >     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> >     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort+ <SERR- <PERR-
> >     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >     Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
> >     Capabilities: [48] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/1 Enable+
> >         Address: 00000000feeff00c  Data: 4151
> >     Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> >         Mapping Address Base: 00000000fee00000
> >     Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> >         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> > <64ns, L1 <1us
> >             ExtTag- RBE+ FLReset-
> >         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> > Unsupported-
> >             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >             MaxPayload 128 bytes, MaxReadReq 512 bytes
> >         DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> > TransPend-
> >         LnkCap:    Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, 
> > Latency L0 <512ns, L1 <4us
> >             ClockPM- Suprise- LLActRep+ BwNot-
> >         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> > CommClk-
> >             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
> > DLActive+ BWMgmt- ABWMgmt-
> >         SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
> > Surpise-
> >             Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
> >         SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
> > HPIrq- LinkChg-
> >             Control: AttnInd Off, PwrInd On, Power- Interlock-
> >         SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
> > Interlock-
> >             Changed: MRL- PresDet+ LinkState+
> >         RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- 
> > CRSVisible-
> >         RootCap: CRSVisible-
> >         RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >     Capabilities: [100] Virtual Channel <?>
> >     Capabilities: [160] Advanced Error Reporting <?>
> >     Kernel driver in use: pcieport-driver
> >     Kernel modules: shpchp
> > 00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
> > 10: 00 00 00 00 00 00 00 00 00 2b 2d 00 f1 01 00 20
> > 20: d0 fc d0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
> > 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> > 50: 05 60 83 00 0c f0 ef fe 00 00 00 00 51 41 00 00
> > 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> > 90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Capabilities: [80] HyperTransport: Host or Secondary Interface
> >         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ 
> > Slave- <EOCErr- DUL-
> >         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> > DwFcInEn- LWO=16bit DwFcOutEn-
> >         Revision ID: 3.00
> >         Link Frequency: 1.0GHz
> >         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> > UIDRD- ExtRS- UCnfE-
> >     Capabilities: [a0] HyperTransport: Host or Secondary Interface
> >         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ 
> > Slave- <EOCErr- DUL-
> >         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> > DwFcInEn- LWO=16bit DwFcOutEn-
> >         Revision ID: 3.00
> >         Link Frequency: 1.0GHz
> >         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> > UIDRD- ExtRS- UCnfE-
> >     Capabilities: [c0] HyperTransport: Host or Secondary Interface
> >         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ 
> > Slave- <EOCErr- DUL-
> >         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> > DwFcInEn- LWO=16bit DwFcOutEn-
> >         Revision ID: 3.00
> >         Link Frequency: 1.0GHz
> >         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> > UIDRD- ExtRS- UCnfE-
> > 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> > 40: 01 02 14 00 04 04 04 00 01 02 04 00 01 02 04 00
> > 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
> > 60: 10 00 07 00 e0 02 00 00 20 c8 4e 00 10 0a 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> > 90: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> > a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> > b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> > c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> > d0: 92 02 85 04 00 00 00 00 07 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] Address Map [1022:1201]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
> > 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> > 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> > 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> > 80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
> > 90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
> > d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
> > e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
> > f0: 02 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Kernel driver in use: amd64_edac
> >     Kernel modules: amd64_edac_mod
> > 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 05 00 c0 0e 00 00 00 00
> > 80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
> > 90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 06 00
> > a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
> > b0: 90 8f a0 1e c1 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Capabilities: [f0] Secure device <?>
> > 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> > 40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 10 10 12 10 01 57 81 1b
> > 60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
> > 70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
> > 80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
> > 90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
> > a0: 00 28 01 a0 80 18 8c 09 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 1a 29 02 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
> > e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
> > f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00
> >
> > 0000:00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] Link Control [1022:1204]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Capabilities: [80] HyperTransport: Host or Secondary Interface
> >         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ 
> > Slave- <EOCErr- DUL-
> >         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> > DwFcInEn- LWO=16bit DwFcOutEn-
> >         Revision ID: 3.00
> >         Link Frequency: 1.0GHz
> >         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> > UIDRD- ExtRS- UCnfE-
> >     Capabilities: [a0] HyperTransport: Host or Secondary Interface
> >         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ 
> > Slave- <EOCErr- DUL-
> >         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> > DwFcInEn- LWO=16bit DwFcOutEn-
> >         Revision ID: 3.00
> >         Link Frequency: 1.0GHz
> >         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> > UIDRD- ExtRS- UCnfE-
> >     Capabilities: [c0] HyperTransport: Host or Secondary Interface
> >         Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ 
> > Slave- <EOCErr- DUL-
> >         Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
> >         Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit 
> > DwFcInEn- LWO=16bit DwFcOutEn-
> >         Revision ID: 3.00
> >         Link Frequency: 1.0GHz
> >         Link Error: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ 
> > UIDRD- ExtRS- UCnfE-
> > 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> > 40: 08 08 04 00 01 02 24 00 01 02 04 00 01 02 04 00
> > 50: 01 02 04 00 01 02 04 00 01 02 04 00 01 02 04 00
> > 60: 11 00 07 00 e0 00 00 00 20 c8 4e 00 08 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 08 a0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> > 90: 92 02 85 04 00 40 00 00 07 00 00 00 00 00 00 00
> > a0: 08 c0 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> > b0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> > c0: 08 00 01 21 20 20 11 11 60 06 75 80 13 00 00 00
> > d0: 44 99 8a 04 00 00 00 00 03 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] Address Map [1022:1201]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 40: 03 00 00 00 00 00 7f 00 03 00 80 00 01 00 0f 01
> > 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> > 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> > 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> > 80: 03 0a 00 00 20 0b 00 00 03 00 f4 00 81 ff f7 00
> > 90: 03 40 fc 00 20 ef fc 00 03 f0 fc 00 01 0f fd 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 13 30 00 00 20 30 00 00 03 10 00 00 01 20 00 00
> > d0: 00 00 00 00 00 00 00 00 03 e0 00 00 01 e0 00 00
> > e0: 03 02 00 3f 13 00 40 ff 00 00 00 00 00 00 00 00
> > f0: 03 90 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Kernel driver in use: amd64_edac
> >     Kernel modules: amd64_edac_mod
> > 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 40: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 e0 3f 38 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 05 00 00 0f 00 00 00 00
> > 80: 60 00 00 00 00 00 00 00 24 ca 69 ef 34 03 82 00
> > 90: 10 21 08 00 0a 80 48 6f 2a 00 00 80 05 00 08 00
> > a0: 00 02 00 00 00 00 00 00 02 00 00 00 00 00 00 00
> > b0: b8 19 8c 1f c1 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Capabilities: [f0] Secure device <?>
> > 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> > 40: ff ff ff 3f 5c 00 70 4a 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 10 10 12 10 01 59 81 9b
> > 60: 00 00 00 00 04 00 7f 42 00 00 00 40 52 80 01 00
> > 70: 53 11 04 00 11 11 08 00 14 0c 20 00 14 09 09 00
> > 80: 81 87 00 e6 e6 41 e6 80 08 00 00 00 10 40 40 00
> > 90: 03 00 00 00 10 00 00 00 00 98 7d 00 00 00 00 00
> > a0: 00 28 01 a0 80 18 8c 0f 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 24 0f 31 c3 14 1c 00 03 28 54 00 00
> > e0: 00 00 00 00 30 15 00 00 9f 77 f0 02 00 00 00 00
> > f0: 0f 00 10 00 00 00 00 00 00 00 00 00 21 0f 10 00
> >
> > 0000:00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 
> > [Opteron, Athlon64, Sempron] Link Control [1022:1204]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:01:04.0 VGA compatible controller [0300]: Trident Microsystems 
> > TGUI 9660/938x/968x [1023:9660] (rev d3)
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> > <TAbort+ <MAbort+ >SERR- <PERR- INTx-
> >     Latency: 32
> >     Interrupt: pin A routed to IRQ 5
> >     Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4M]
> >     Region 1: Memory at fcc00000 (32-bit, non-prefetchable) [size=64K]
> >     Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=4M]
> >     [virtual] Expansion ROM at f8000000 [disabled] [size=64K]
> >     Kernel modules: tridentfb
> > 00: 23 10 60 96 07 00 00 32 d3 00 00 03 00 20 00 00
> > 10: 00 00 40 fc 00 00 c0 fc 00 00 80 fc 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00
> > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments 
> > TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] 
> > (prog-if 10)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
> >     Interrupt: pin A routed to IRQ 16
> >     Region 0: Memory at fcc14000 (32-bit, non-prefetchable) [size=2K]
> >     Region 1: Memory at fcc10000 (32-bit, non-prefetchable) [size=16K]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME+
> >     Kernel driver in use: ohci1394
> >     Kernel modules: firewire-ohci, ohci1394
> > 00: 4c 10 23 80 06 01 10 02 00 10 00 0c 10 20 00 00
> > 10: 00 40 c1 fc 00 00 c1 fc 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 02 04
> > 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
> > f0: 10 00 00 00 82 00 00 00 3c 10 fe 12 00 00 00 00
> >
> > 0000:2b:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express
> > PCI/PCI-X Bridge [1033:0125] (rev 06)
> >   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0, Cache Line Size: 64 bytes
> >     Bus: primary=2b, secondary=2c, subordinate=2c, sec-latency=32
> >     I/O behind bridge: 0000f000-00000fff
> >     Memory behind bridge: fff00000-000fffff
> >     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> >     Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- 
> > <TAbort- <MAbort+ <SERR- <PERR-
> >     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >     Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
> >         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> > <64ns, L1 <1us
> >             ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal+ 
> > Unsupported-
> >             RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
> >             MaxPayload 128 bytes, MaxReadReq 512 bytes
> >         DevSta:    CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
> > TransPend-
> >         LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> > Latency L0 <4us, L1 <16us
> >             ClockPM- Suprise- LLActRep- BwNot-
> >         LnkCtl:    ASPM Disabled; Disabled- Retrain- CommClk-
> >             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
> > DLActive- BWMgmt- ABWMgmt-
> >     Capabilities: [54] PCI-X bridge device
> >         Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
> >         Status: Dev=2b:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
> >         Upstream: Capacity=32 CommitmentLimit=32
> >         Downstream: Capacity=16 CommitmentLimit=16
> >     Capabilities: [64] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA 
> > PME(D0+,D1+,D2-,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >         Bridge: PM- B3+
> >     Capabilities: [100] Advanced Error Reporting <?>
> >     Kernel modules: shpchp
> > 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> > 10: 00 00 00 00 00 00 00 00 2b 2c 2c 20 f1 01 20 24
> > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
> > 40: 10 54 71 00 01 00 00 00 04 20 0a 00 81 6c 02 00
> > 50: 00 00 41 00 07 64 c3 00 00 2b 00 00 20 00 20 00
> > 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 0c 00 19 1f 00 00 00 00
> > 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0000:2b:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express
> > PCI/PCI-X Bridge [1033:0125] (rev 06)
> >   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> >
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0, Cache Line Size: 64 bytes
> >     Region 0: Memory at fcd00000 (64-bit, non-prefetchable) [size=128]
> >     Bus: primary=2b, secondary=2d, subordinate=2d, sec-latency=32
> >     I/O behind bridge: 0000f000-00000fff
> >     Memory behind bridge: fff00000-000fffff
> >     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> >     Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- 
> > <TAbort- <MAbort+ <SERR- <PERR-
> >     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >     Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
> >         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> > <64ns, L1 <1us
> >             ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal+ 
> > Unsupported-
> >             RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
> >             MaxPayload 128 bytes, MaxReadReq 512 bytes
> >         DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> > TransPend-
> >         LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> > Latency L0 <4us, L1 <16us
> >             ClockPM- Suprise- LLActRep- BwNot-
> >         LnkCtl:    ASPM Disabled; Disabled- Retrain- CommClk-
> >             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
> > DLActive- BWMgmt- ABWMgmt-
> >     Capabilities: [54] PCI-X bridge device
> >         Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
> >         Status: Dev=2b:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
> >         Upstream: Capacity=32 CommitmentLimit=32
> >         Downstream: Capacity=16 CommitmentLimit=16
> >     Capabilities: [64] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA 
> > PME(D0+,D1+,D2-,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >         Bridge: PM- B3+
> >     Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/0 Enable-
> >         Address: 0000000000000000  Data: 0000
> >     Capabilities: [7c] Hot-plug capable
> >     Capabilities: [100] Advanced Error Reporting <?>
> >     Kernel modules: shpchp
> > 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> > 10: 04 00 d0 fc 00 00 00 00 2b 2d 2d 20 f1 01 20 24
> > 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 02 00
> > 40: 10 54 71 00 01 00 00 00 04 20 00 00 81 6c 02 00
> > 50: 00 00 41 00 07 64 03 00 01 2b 00 00 20 00 20 00
> > 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0001:40:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory 
> > Controller [10de:0369] (rev a2)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR+ FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0
> >     Capabilities: [44] HyperTransport: Slave or Primary Interface
> >         Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
> >         Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- 
> > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> >         Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
> > LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
> >         Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
> > <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
> >         Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
> > DwFcInEn- LWO=8bit DwFcOutEn-
> >         Revision ID: 1.03
> >         Link Frequency 0: 1.0GHz
> >         Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
> > 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
> >         Link Frequency 1: 200MHz
> >         Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
> >         Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
> > 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
> >         Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
> > SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
> >         Prefetchable memory behind bridge Upper: 00-00
> >         Bus Number: 00
> >     Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
> >         Mapping Address Base: 00000000fee00000
> > 00: de 10 69 03 06 01 b0 00 a2 00 00 05 00 00 00 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
> > 40: 3c 10 fe 12 08 dc e0 01 22 00 11 11 d0 00 00 00
> > 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 38 0a 00
> > 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> > 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> > 90: 78 00 40 90 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> > e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0001:40:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge 
> > [10de:0361] (rev a3)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0
> >     Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=4K]
> > 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
> > 10: 00 00 00 00 00 00 00 fd 00 00 00 00 00 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> > 40: 3c 10 fe 12 00 00 00 00 fa 3e ff 00 fa 3e ff 00
> > 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
> > 70: 10 00 ff ff c7 80 00 00 00 00 46 20 00 00 00 c0
> > 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
> > 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
> >
> > 0001:40:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] 
> > (rev a3)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Interrupt: pin A routed to IRQ 255
> >     Region 4: I/O ports at 2000 [size=64]
> >     Region 5: I/O ports at 2040 [size=64]
> >     Capabilities: [44] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Kernel driver in use: nForce2_smbus
> >     Kernel modules: i2c-nforce2
> > 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 20: 01 20 00 00 41 20 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> > 40: 3c 10 fe 12 01 00 02 c0 00 00 00 00 00 00 00 00
> > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 01 e8 00 00 01 e9 00 00 01 ea 00 00 00 00 00 00
> > 70: 01 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: d4 30 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: e6 16 05 00 b5 03 00 07 80 ff 57 00 61 44 44 11
> > f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
> >
> > 0001:40:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express 
> > bridge [10de:0378] (rev a3)
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR+ FastB2B- DisINTx+
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0, Cache Line Size: 64 bytes
> >     Bus: primary=40, secondary=6b, subordinate=6b, sec-latency=0
> >     I/O behind bridge: 00001000-00001fff
> >     Memory behind bridge: fcf00000-fcffffff
> >     Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> >     Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort+ <SERR- <PERR-
> >     BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> >         PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >     Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
> >     Capabilities: [48] Power Management version 2
> >         Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> > PME(D0+,D1+,D2+,D3hot+,D3cold+)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/1 Enable+
> >         Address: 00000000feeff00c  Data: 4159
> >     Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
> >         Mapping Address Base: 00000000fee00000
> >     Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
> >         DevCap:    MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
> > <64ns, L1 <1us
> >             ExtTag- RBE+ FLReset-
> >         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> > Unsupported-
> >             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >             MaxPayload 128 bytes, MaxReadReq 512 bytes
> >         DevSta:    CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> > TransPend-
> >         LnkCap:    Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, 
> > Latency L0 <512ns, L1 <4us
> >             ClockPM- Suprise- LLActRep+ BwNot-
> >         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> > CommClk-
> >             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
> > DLActive+ BWMgmt- ABWMgmt-
> >         SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
> > Surpise-
> >             Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
> >         SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- 
> > HPIrq- LinkChg-
> >             Control: AttnInd Off, PwrInd On, Power- Interlock-
> >         SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
> > Interlock-
> >             Changed: MRL- PresDet+ LinkState+
> >         RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- 
> > CRSVisible-
> >         RootCap: CRSVisible-
> >         RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >     Capabilities: [100] Virtual Channel <?>
> >     Capabilities: [160] Advanced Error Reporting <?>
> >     Kernel driver in use: pcieport-driver
> >     Kernel modules: shpchp
> > 00: de 10 78 03 07 05 10 00 a3 00 04 06 10 00 01 00
> > 10: 00 00 00 00 00 00 00 00 40 6b 6b 00 11 11 00 20
> > 20: f0 fc f0 fc f1 ff 01 00 00 00 00 00 00 00 00 00
> > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 02 00
> > 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> > 50: 05 60 83 00 0c f0 ef fe 00 00 00 00 59 41 00 00
> > 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 80: 10 00 41 01 01 80 00 00 10 28 01 00 41 3c 11 02
> > 90: 00 00 41 30 00 00 00 00 c0 01 48 01 04 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > 0001:6b:00.0 SCSI storage controller [0100]: LSI Logic / Symbios 
> > Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
> >     Subsystem: Hewlett-Packard Company Device [103c:12fe]
> >     Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
> > ParErr- Stepping- SERR- FastB2B- DisINTx-
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Interrupt: pin A routed to IRQ 43
> >     Region 0: I/O ports at 1000 [disabled] [size=256]
> >     Region 1: Memory at <unassigned> (64-bit, non-prefetchable) 
> > [disabled]
> >     Region 3: Memory at <unassigned> (64-bit, non-prefetchable) 
> > [disabled]
> >     [virtual] Expansion ROM at fcf00000 [disabled] [size=1M]
> >     Capabilities: [50] Power Management version 2
> >         Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
> > PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >         Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> >     Capabilities: [68] Express (v1) Endpoint, MSI 00
> >         DevCap:    MaxPayload 4096 bytes, PhantFunc 0, Latency L0s 
> > <64ns, L1 <1us
> >             ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> >         DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- 
> > Unsupported-
> >             RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >             MaxPayload 128 bytes, MaxReadReq 512 bytes
> >         DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
> > TransPend-
> >         LnkCap:    Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, 
> > Latency L0 <64ns, L1 <1us
> >             ClockPM- Suprise- LLActRep- BwNot-
> >         LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
> > CommClk-
> >             ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >         LnkSta:    Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
> > DLActive- BWMgmt- ABWMgmt-
> >     Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ 
> > Queue=0/0 Enable-
> >         Address: 0000000000000000  Data: 0000
> >     Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
> >         Vector table: BAR=1 offset=00002000
> >         PBA: BAR=1 offset=00003000
> >     Capabilities: [100] Advanced Error Reporting <?>
> >     Kernel modules: mptsas
> > 00: 00 10 58 00 00 00 10 00 08 00 00 01 00 00 00 00
> > 10: 01 00 00 00 04 00 00 00 00 00 00 00 04 00 00 00
> > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 fe 12
> > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 01 00 00
> > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 50: 01 68 02 06 00 00 00 00 00 00 00 00 00 00 00 00
> > 60: 00 00 00 00 00 00 00 00 10 98 01 00 25 00 00 00
> > 70: 10 28 00 00 81 0c 00 00 00 00 41 00 00 00 00 00
> > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > 90: 00 00 00 00 00 00 00 00 05 b0 80 00 00 00 00 00
> > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > b0: 11 00 00 00 01 20 00 00 01 30 00 00 00 00 00 00
> > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> >
> > Windows 7 : Trouvez le PC qui vous convient! Découvrez notre offre ! 
> > http://clk.atdmt.com/FRM/go/181574577/direct/01/
> >
> > flashrom mailing list
> > [e-mail]
> > http://www.flashrom.org/mailman/listinfo/flashrom
>
> dump.txt
>
> flashrom v0.9.1-r877
> No coreboot table found.
> DMI string 0: "Tyan Computer Corporation "
> DMI string 1: "MCP55 "
> DMI string 2: "REFERENCE"
> DMI string 3: "Tyan Computer Corporation "
> DMI string 4: "S2915 "
> DMI string 5: "REFERENCE"
> Found chipset "NVIDIA MCP55", enabling flash write... OK.
> This chipset supports the following protocols: Non-SPI.
> Calibrating delay loop... 554M loops per second, 100 myus = 202 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0x5b, id2 0xfb
> Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xff, id2 0xff
> Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix MX29F001B, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F001T, 128 KB: probe_29f002: id1 0x5b, id2 0xfb
> Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0x5d, id2 0x58
> Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0x4e, id2 0x41
> Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC Pm29F002T, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm29F002B, 256 KB: probe_29f040b: id1 0x5d, id2 0x58
> Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
> Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x0d, id2 0xd6, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x4e, id2 0x41
> Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
> Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x5d, id2 0x58
> Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x5b, id2 0xfb, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
> Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0x5d, id2 0x58, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
> No EEPROM/flash device found.
> If you know which flash chip you have, and if this version of flashrom
> supports a similar flash chip, you can try to force read your chip. Run:
> flashrom -f -r -c similar_supported_flash_chip filename
>
> Note: flashrom can never write when the flash chip isn't found automatically.
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0
>    Capabilities: [44] HyperTransport: Slave or Primary Interface
>    	Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>    	Link Control 0: CFlE+ CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>    	Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Link Control 1: CFlE- CST- CFE-<LkFail+ Init- EOC+ TXO+<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>    	Revision ID: 1.03
>    	Link Frequency 0: 1.0GHz
>    	Link Error 0:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>    	Link Frequency 1: 200MHz
>    	Link Error 1:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>    	Prefetchable memory behind bridge Upper: 00-00
>    	Bus Number: 00
>    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>    	Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 02 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0
>    Region 0: I/O ports at 1c00 [size=128]
> 00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
> 10: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
> 70: 10 00 ff ff c5 80 00 00 00 00 44 19 0d 40 20 10
> 80: 09 20 00 8c 1d 83 00 60 f0 00 00 00 ff 00 00 00
> 90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 03 00 10 11 05 43 00 00 00 06 8f 06 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 44 00 00 fe fd 03 00 a0
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Interrupt: pin A routed to IRQ 255
>    Region 0: I/O ports at 3000 [size=64]
>    Region 4: I/O ports at 3440 [size=64]
>    Region 5: I/O ports at 3400 [size=64]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 34 00 00 01 34 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 a0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 64 15 05 00 a5 03 50 07 80 30 80 00 77 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (750ns min, 250ns max)
>    Interrupt: pin A routed to IRQ 21
>    Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Kernel driver in use: ohci_hcd
> 00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
> 10: 00 40 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
> 40: f1 10 15 29 01 00 02 fe 00 00 00 00 00 00 00 00
> 50: 04 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (750ns min, 250ns max)
>    Interrupt: pin B routed to IRQ 22
>    Region 0: Memory at a0005000 (32-bit, non-prefetchable) [size=256]
>    Capabilities: [44] Debug port: BAR=1 offset=0098
>    Capabilities: [80] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>    Kernel driver in use: ehci_hcd
> 00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
> 10: 00 50 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
> 40: f1 10 15 29 0a 80 98 20 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
> 70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 f4 00
> 80: 01 00 02 fe 00 80 00 00 00 00 00 00 15 16 00 00
> 90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 01 00 00 01 00 00 08 80 00 00 00 00 00 00 00 00
> b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
> c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (750ns min, 250ns max)
>    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>    Region 4: I/O ports at 3480 [size=16]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Kernel driver in use: pata_amd
> 00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 34 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
> 40: f1 10 15 29 01 00 02 00 00 00 00 00 00 00 00 00
> 50: 02 f0 00 00 00 00 00 00 99 99 99 20 2a 00 a8 20
> 60: 00 00 00 c5 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 c0 34 33 00 00 04 1c 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 12 00 00 00 00 00 00 00
>
> 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (750ns min, 250ns max)
>    Interrupt: pin A routed to IRQ 20
>    Region 0: I/O ports at 34d0 [size=8]
>    Region 1: I/O ports at 34c4 [size=4]
>    Region 2: I/O ports at 34c8 [size=8]
>    Region 3: I/O ports at 34c0 [size=4]
>    Region 4: I/O ports at 3490 [size=16]
>    Region 5: Memory at a0006000 (32-bit, non-prefetchable) [size=4K]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>    Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: d1 34 00 00 c5 34 00 00 c9 34 00 00 c1 34 00 00
> 20: 91 34 00 00 00 60 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fe ff ff ff 00 00 ce 23 ff df ef ff
> 90: 00 00 ff 3f 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 23 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 0f 00 20 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 01 24 e0 00
> f0: 00 00 00 00 00 00 00 00 02 00 0c 00 00 00 00 00
>
> 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (750ns min, 250ns max)
>    Interrupt: pin B routed to IRQ 19
>    Region 0: I/O ports at 34e8 [size=8]
>    Region 1: I/O ports at 34dc [size=4]
>    Region 2: I/O ports at 34e0 [size=8]
>    Region 3: I/O ports at 34d8 [size=4]
>    Region 4: I/O ports at 34a0 [size=16]
>    Region 5: Memory at a0007000 (32-bit, non-prefetchable) [size=4K]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>    Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: e9 34 00 00 dd 34 00 00 e1 34 00 00 d9 34 00 00
> 20: a1 34 00 00 00 70 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 ef ff ff ff 00 00 05 12 bf ff ff fd
> 90: 00 00 bb 34 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 00
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 80 07
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (750ns min, 250ns max)
>    Interrupt: pin C routed to IRQ 18
>    Region 0: I/O ports at 3800 [size=8]
>    Region 1: I/O ports at 34f4 [size=4]
>    Region 2: I/O ports at 34f8 [size=8]
>    Region 3: I/O ports at 34f0 [size=4]
>    Region 4: I/O ports at 34b0 [size=16]
>    Region 5: Memory at a0008000 (32-bit, non-prefetchable) [size=4K]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
>    Kernel driver in use: sata_nv
> 00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
> 10: 01 38 00 00 f5 34 00 00 f9 34 00 00 f1 34 00 00
> 20: b1 34 00 00 00 80 00 a0 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
> 40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
> 50: 0f 68 08 80 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
> 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
> 80: 00 00 00 c0 fb ff ff ed 00 00 bf 0e bf ff 67 ff
> 90: 00 00 45 29 00 00 00 00 06 00 06 10 7f 03 01 01
> a0: 12 0a 00 00 c0 00 00 00 00 00 00 00 33 31 00 02
> b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
> d0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 a0 07
> e0: 0a 00 02 65 42 00 00 00 00 00 00 00 00 00 90 02
> f0: 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00
>
> 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0
>    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>    I/O behind bridge: 0000f000-00000fff
>    Memory behind bridge: a0100000-a01fffff
>    Prefetchable memory behind bridge: fff00000-000fffff
>    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
>    Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
>    Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
>    	Mapping Address Base: 00000000fee00000
> 00: de 10 70 03 07 00 b0 00 a2 01 04 06 00 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 02
> 20: 10 a0 10 a0 f0 ff 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 0a
> 40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 44 00
> 50: 00 00 fe 8f 00 00 00 00 ff 1f ff 1f 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 fe 6f 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
> 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
> c0: de 10 84 cb 07 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (500ns min, 1250ns max)
>    Interrupt: pin B routed to IRQ 20
>    Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16K]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
>    	Address: 0000000000000000  Data: 0000
>    	Masking: 00000000  Pending: 00000000
>    Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>    Kernel driver in use: HDA Intel
> 00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
> 10: 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05
> 40: f1 10 15 29 01 50 02 c0 00 00 00 00 01 01 0f 00
> 50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 47 00 29 00 00 00 00 00 00
>
> 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (250ns min, 5000ns max)
>    Interrupt: pin A routed to IRQ 52
>    Region 0: Memory at a0009000 (32-bit, non-prefetchable) [size=4K]
>    Region 1: I/O ports at 3808 [size=8]
>    Region 2: Memory at a0005800 (32-bit, non-prefetchable) [size=256]
>    Region 3: Memory at a0005400 (32-bit, non-prefetchable) [size=16]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
>    Capabilities: [70] MSI-X: Enable- Count=8 Masked-
>    	Vector table: BAR=2 offset=00000000
>    	PBA: BAR=3 offset=00000000
>    Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
>    	Address: 00000000fee0f00c  Data: 41b1
>    	Masking: 000000fe  Pending: 00000000
>    Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>    Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 90 00 a0 09 38 00 00 00 58 00 a0 00 54 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b1 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0 (250ns min, 5000ns max)
>    Interrupt: pin A routed to IRQ 53
>    Region 0: Memory at a000b000 (32-bit, non-prefetchable) [size=4K]
>    Region 1: I/O ports at 3810 [size=8]
>    Region 2: Memory at a000a000 (32-bit, non-prefetchable) [size=256]
>    Region 3: Memory at a0005c00 (32-bit, non-prefetchable) [size=16]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
>    Capabilities: [70] MSI-X: Enable- Count=8 Masked-
>    	Vector table: BAR=2 offset=00000000
>    	PBA: BAR=3 offset=00000000
>    Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
>    	Address: 00000000fee0f00c  Data: 41b9
>    	Masking: 000000fe  Pending: 00000000
>    Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
>    Kernel driver in use: forcedeth
> 00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
> 10: 00 b0 00 a0 11 38 00 00 00 a0 00 a0 00 5c 00 a0
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
> 40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
> 50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b9 41 00 00
> 60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
> 70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 11 00 00 00 42 01 00 00 00 00 00 00
>
> 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
>    I/O behind bridge: 00004000-00004fff
>    Memory behind bridge: a0200000-a03fffff
>    Prefetchable memory behind bridge: 00000000a4000000-00000000a5ffffff
>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>    Capabilities: [48] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>    	Address: 00000000fee0f00c  Data: 4151
>    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>    	Mapping Address Base: 00000000fee00000
>    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>    		ExtTag- RBE+ FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0<512ns, L1<4us
>    		ClockPM- Surprise- LLActRep+ BwNot-
>    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>    		Control: AttnInd Off, PwrInd On, Power- Interlock-
>    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>    		Changed: MRL- PresDet+ LinkState+
>    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>    	RootCap: CRSVisible-
>    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>    Capabilities: [100] Virtual Channel<?>
>    Capabilities: [160] Advanced Error Reporting
>    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>    Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 04 00 41 41 00 00
> 20: 20 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 30 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>    I/O behind bridge: 00005000-00005fff
>    Memory behind bridge: a1000000-a2ffffff
>    Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>    Capabilities: [48] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>    	Address: 00000000fee0f00c  Data: 4159
>    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>    	Mapping Address Base: 00000000fee00000
>    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>    		ExtTag- RBE+ FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0<512ns, L1<4us
>    		ClockPM- Surprise- LLActRep+ BwNot-
>    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>    		Control: AttnInd Off, PwrInd On, Power- Interlock-
>    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>    		Changed: MRL- PresDet+ LinkState+
>    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>    	RootCap: CRSVisible-
>    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>    Capabilities: [100] Virtual Channel<?>
>    Capabilities: [160] Advanced Error Reporting
>    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>    Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 05 05 00 51 51 00 00
> 20: 00 a1 f0 a2 01 b0 f1 bf 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0c 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Capabilities: [80] HyperTransport: Host or Secondary Interface
>    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
>    	Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Revision ID: 1.02
>    	Link Frequency: 1.0GHz
>    	Link Error:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>    Capabilities: [a0] HyperTransport: Host or Secondary Interface
>    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
>    	Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Revision ID: 1.02
>    	Link Frequency: 1.0GHz
>    	Link Error:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>    Capabilities: [c0] HyperTransport: Host or Secondary Interface
>    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
>    	Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Revision ID: 1.02
>    	Link Frequency: 1.0GHz
>    	Link Error:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 01 03 00 02 04 01 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 10 00 03 00 e4 02 00 00 20 c8 0e 0f 30 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 69 01 61 01 00 00 7f 00 07 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 01 70 00 90 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
> 80: 22 00 00 00 00 00 00 00 24 a2 68 cf 20 13 92 00
> 90: 10 08 08 00 5a 90 40 64 39 00 00 80 00 00 00 00
> a0: 49 03 00 cf 00 00 00 00 00 00 00 00 00 00 00 00
> b0: fb 9d eb cc 89 00 00 00 68 1c 1f e8 3f c0 e7 ff
> c0: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 3f 4c 9f 36 1c bd 36 8b fd 8e ce 1e 2f 9e 6e b4
> e0: 15 6e 8f 90 86 9d 96 81 7f ce 4e 9e 3f bb 2f 94
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Capabilities: [f0] Secure device<?>
>    Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 d0 0a 00 00 00 00 00 00 00 00
> 50: 08 12 f0 71 e9 00 00 00 00 00 00 00 00 26 00 00
> 60: 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 10 d4 fa df 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 26 26 25 00
> e0: 00 00 00 00 24 18 5d 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 04 00 00 02 00 00 00 12 0f 04 00
>
> 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Capabilities: [80] HyperTransport: Host or Secondary Interface
>    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
>    	Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Revision ID: 1.02
>    	Link Frequency: 1.0GHz
>    	Link Error:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>    Capabilities: [a0] HyperTransport: Host or Secondary Interface
>    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
>    	Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Revision ID: 1.02
>    	Link Frequency: 1.0GHz
>    	Link Error:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>    Capabilities: [c0] HyperTransport: Host or Secondary Interface
>    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-<EOCErr- DUL-
>    	Link Control: CFlE- CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Revision ID: 1.02
>    	Link Frequency: 1.0GHz
>    	Link Error:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
> 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
> 40: 04 08 01 00 01 01 05 00 01 01 01 00 01 01 01 00
> 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
> 60: 11 00 03 00 e4 00 00 00 20 c8 0e 0f 1c 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> 90: 69 01 61 01 00 80 ff 00 07 00 00 00 00 00 00 00
> a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> b0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
> d0: 13 56 13 04 00 00 00 00 03 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 00 00 00 00 00 6f 01 00 00 00 00 01 00 00 00
> 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
> 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
> 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
> 80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
> 90: 03 00 c0 00 01 ff df 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
> b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
> c0: 33 10 00 00 20 50 00 00 03 60 00 00 01 60 00 00
> d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
> e0: 03 02 00 7f 13 00 80 ff 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
> 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 00
> 90: 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 96 8a bb cd 1f 00 00 00 01 1e 0f 08 bd 50 76 57
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 1d 7b 36 67 30 87 df 7e 02 18 72 9f 8c 39 fd 74
> e0: 0d 17 3e a3 1a c3 ff 36 c1 5c 38 df cc 19 dd 72
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
>    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Capabilities: [f0] Secure device<?>
>    Kernel driver in use: k8temp
> 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
> 40: ff 3b 04 00 40 00 50 0a 00 00 00 00 00 00 00 00
> 50: 00 d0 01 c8 c7 00 00 00 00 00 00 00 00 00 00 84
> 60: 20 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
> 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
> 80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
> 90: 06 00 00 00 48 00 00 00 80 fe ff fb 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 07 a7 e2 04 10 27 c0 20 25 26 26 00
> e0: 00 00 00 00 24 18 58 00 1b 17 00 00 00 00 00 00
> f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00
>
> 01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>    Interrupt: pin A routed to IRQ 21
>    Region 0: Memory at a0104000 (32-bit, non-prefetchable) [size=2K]
>    Region 1: Memory at a0100000 (32-bit, non-prefetchable) [size=16K]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>    Kernel driver in use: ohci1394
> 00: 4c 10 23 80 16 00 10 02 00 10 00 0c 10 40 00 00
> 10: 00 40 10 a0 00 00 10 a0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
> 40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
> f0: 10 00 00 00 82 10 00 00 f1 10 15 29 00 00 00 00
>
> 02:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Bus: primary=02, secondary=03, subordinate=03, sec-latency=68
>    I/O behind bridge: 00004000-00004fff
>    Memory behind bridge: a0300000-a03fffff
>    Prefetchable memory behind bridge: 00000000a4000000-00000000a5ffffff
>    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>    Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>    	LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0<4us, L1<16us
>    		ClockPM- Surprise- LLActRep- BwNot-
>    	LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>    Capabilities: [54] PCI-X bridge device
>    	Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>    	Status: Dev=02:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>    	Upstream: Capacity=32 CommitmentLimit=32
>    	Downstream: Capacity=16 CommitmentLimit=16
>    Capabilities: [64] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    	Bridge: PM- B3+
>    Capabilities: [100] Advanced Error Reporting
>    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
>    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 02 03 03 44 41 41 20 04
> 20: 30 a0 30 a0 01 a4 f1 a5 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 0a 00 81 6c 02 00
> 50: 00 00 41 00 07 64 c3 00 00 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 1f 3f 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 02:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Region 0: Memory at a0200000 (64-bit, non-prefetchable) [size=128]
>    Bus: primary=02, secondary=04, subordinate=04, sec-latency=4
>    I/O behind bridge: 0000f000-00000fff
>    Memory behind bridge: fff00000-000fffff
>    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow>TAbort-<TAbort-<MAbort+<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>    Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
>    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0<4us, L1<16us
>    		ClockPM- Surprise- LLActRep- BwNot-
>    	LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
>    Capabilities: [54] PCI-X bridge device
>    	Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>    	Status: Dev=02:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
>    	Upstream: Capacity=32 CommitmentLimit=32
>    	Downstream: Capacity=16 CommitmentLimit=16
>    Capabilities: [64] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    	Bridge: PM- B3+
>    Capabilities: [6c] MSI: Enable- Count=1/1 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Capabilities: [7c] Hot-plug capable
>    Capabilities: [100] Advanced Error Reporting
>    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> 00: 33 10 25 01 07 00 10 00 06 00 04 06 10 00 81 00
> 10: 04 00 20 a0 00 00 00 00 02 04 04 04 f1 01 20 24
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
> 40: 10 54 71 00 01 00 00 00 00 20 00 00 81 6c 02 00
> 50: 00 00 41 00 07 64 03 00 01 02 00 00 20 00 20 00
> 60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 03:09.0 RAID bus controller [0104]: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
>    Subsystem: 3ware Inc 9550SX SATA-II RAID PCI-X [13c1:1003]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 64 (16000ns min), Cache Line Size: 64 bytes
>    Interrupt: pin A routed to IRQ 17
>    Region 0: Memory at a4000000 (64-bit, prefetchable) [size=32M]
>    Region 2: Memory at a0300000 (64-bit, non-prefetchable) [size=4K]
>    Region 4: I/O ports at 4000 [size=64]
>    [virtual] Expansion ROM at a0320000 [disabled] [size=128K]
>    Capabilities: [e0] PCI-X non-bridge device
>    	Command: DPERE- ERO+ RBC=512 OST=3
>    	Status: Dev=03:09.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=3 DMCRS=16 RSCEM- 266MHz- 533MHz-
>    Capabilities: [e8] Power Management version 2
>    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [f0] MSI: Enable- Count=1/8 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Kernel driver in use: 3w-9xxx
> 00: c1 13 03 10 17 00 b0 02 00 00 04 01 10 40 00 00
> 10: 0c 00 00 a4 00 00 00 00 04 00 30 a0 00 00 00 00
> 20: 01 40 00 00 00 00 00 00 00 00 00 00 c1 13 03 10
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 0a 01 40 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 82
> 50: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 07 e8 22 00 48 03 03 05 01 f0 02 06 00 00 00 00
> f0: 05 00 86 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 05:00.0 VGA compatible controller [0300]: nVidia Corporation G73 [GeForce 7600 GT] [10de:0391] (rev a1) (prog-if 00 [VGA controller])
>    Subsystem: ASUSTeK Computer Inc. Device [1043:81f7]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0
>    Interrupt: pin A routed to IRQ 22
>    Region 0: Memory at a2000000 (32-bit, non-prefetchable) [size=16M]
>    Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
>    Region 3: Memory at a1000000 (64-bit, non-prefetchable) [size=16M]
>    Region 5: I/O ports at 5000 [size=128]
>    Expansion ROM at<unassigned>  [disabled]
>    Capabilities: [60] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Capabilities: [78] Express (v1) Endpoint, MSI 00
>    	DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s<1us, L1<4us
>    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0<1us, L1<4us
>    		ClockPM- Surprise- LLActRep- BwNot-
>    	LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>    Capabilities: [100] Virtual Channel<?>
>    Capabilities: [128] Power Budgeting<?>
>    Kernel driver in use: nvidia
> 00: de 10 91 03 07 00 10 00 a1 00 00 03 00 00 00 00
> 10: 00 00 00 a2 0c 00 00 b0 00 00 00 00 04 00 00 a1
> 20: 00 00 00 00 01 50 00 00 00 00 00 00 43 10 f7 81
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 01 00 00 05 00 00
> 80: 10 28 00 00 01 4d 01 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0
>    Capabilities: [44] HyperTransport: Slave or Primary Interface
>    	Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>    	Link Control 0: CFlE+ CST- CFE-<LkFail- Init+ EOC- TXO-<CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>    	Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>    	Link Control 1: CFlE- CST- CFE-<LkFail+ Init- EOC+ TXO+<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>    	Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>    	Revision ID: 1.03
>    	Link Frequency 0: 1.0GHz
>    	Link Error 0:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>    	Link Frequency 1: 200MHz
>    	Link Error 1:<Prot-<Ovfl-<EOC- CTLTm-
>    	Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>    	Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>    	Prefetchable memory behind bridge Upper: 00-00
>    	Bus Number: 00
>    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
>    	Mapping Address Base: 00000000fee00000
> 00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
> 40: f1 10 15 29 08 dc e0 01 22 20 11 11 d0 00 00 00
> 50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
> 70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
> 80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
> 90: 70 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
> e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge [10de:0361] (rev a3)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0
>    Region 0: I/O ports at 2c00 [size=128]
>    Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
> 00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
> 10: 01 2c 00 00 00 00 00 c0 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
> 40: f1 10 15 29 00 00 00 00 fa 3e ff 00 fa 3e ff 00
> 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 f9 ff
> 70: 10 00 ff ff 43 00 00 00 00 00 42 20 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 ff 00 00 01 ff 00 00 00
> 90: ff 7f 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00
>
> 80:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
>    Subsystem: Tyan Computer Device [10f1:2915]
>    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Interrupt: pin A routed to IRQ 255
>    Region 0: I/O ports at 6000 [size=64]
>    Region 4: I/O ports at 6440 [size=64]
>    Region 5: I/O ports at 6400 [size=64]
>    Capabilities: [44] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Kernel driver in use: nForce2_smbus
> 00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
> 10: 01 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 64 00 00 01 64 00 00 00 00 00 00 f1 10 15 29
> 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
> 40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 01 f0 00 00 01 f4 00 00 01 f8 00 00 00 00 00 00
> 70: 01 00 00 00 00 00 04 c0 00 00 00 00 01 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: e6 16 05 00 a5 03 50 07 80 ff f7 00 61 44 44 11
> f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00
>
> 80:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
>    I/O behind bridge: 0000f000-00000fff
>    Memory behind bridge: fff00000-000fffff
>    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>    Capabilities: [48] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>    	Address: 00000000fee0f00c  Data: 4161
>    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>    	Mapping Address Base: 00000000fee00000
>    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>    		ExtTag- RBE+ FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0<512ns, L1<4us
>    		ClockPM- Surprise- LLActRep+ BwNot-
>    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>    		Control: AttnInd Off, PwrInd On, Power- Interlock-
>    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>    		Changed: MRL- PresDet- LinkState-
>    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>    	RootCap: CRSVisible-
>    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>    Kernel driver in use: pcieport-driver
> 00: de 10 78 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 81 81 00 f1 01 00 00
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
> 90: 00 00 41 10 00 00 00 00 c0 01 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 80:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
>    I/O behind bridge: 0000f000-00000fff
>    Memory behind bridge: c1000000-c2ffffff
>    Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort-<SERR-<PERR-
>    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort->Reset- FastB2B-
>    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
>    Capabilities: [48] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
>    	Address: 00000000fee0f00c  Data: 4169
>    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
>    	Mapping Address Base: 00000000fee00000
>    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
>    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s<64ns, L1<1us
>    		ExtTag- RBE+ FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0<512ns, L1<4us
>    		ClockPM- Surprise- LLActRep+ BwNot-
>    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
>    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>    		Control: AttnInd Off, PwrInd On, Power- Interlock-
>    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>    		Changed: MRL- PresDet+ LinkState+
>    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>    	RootCap: CRSVisible-
>    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>    Kernel driver in use: pcieport-driver
> 00: de 10 77 03 07 04 10 00 a3 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 80 82 82 00 f1 01 00 00
> 20: 00 c1 f0 c2 01 d0 f1 df 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
> 40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
> 50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 69 41 00 00
> 60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
> 90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 82:00.0 VGA compatible controller [0300]: nVidia Corporation NV38GL [Quadro FX 1300] [10de:00fe] (rev a2) (prog-if 00 [VGA controller])
>    Subsystem: nVidia Corporation Device [10de:0238]
>    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>    Latency: 0, Cache Line Size: 64 bytes
>    Interrupt: pin A routed to IRQ 10
>    Region 0: Memory at c2000000 (32-bit, non-prefetchable) [size=16M]
>    Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>    Region 2: Memory at c1000000 (32-bit, non-prefetchable) [size=16M]
>    Capabilities: [60] Power Management version 2
>    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>    	Address: 0000000000000000  Data: 0000
>    Capabilities: [78] Express (v1) Legacy Endpoint, MSI 00
>    	DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s<512ns, L1<4us
>    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>    		MaxPayload 128 bytes, MaxReadReq 512 bytes
>    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0<2us, L1<16us
>    		ClockPM- Surprise- LLActRep- BwNot-
>    	LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
>    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> 00: de 10 fe 00 07 00 10 00 a2 00 00 03 10 00 00 00
> 10: 00 00 00 c2 08 00 00 d0 00 00 00 c1 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 38 02
> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
> 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 10 00 11 00 c0 04 00 00
> 80: 10 28 00 00 01 55 02 00 08 00 01 11 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 0c 08 40 c1 01 04 40 c1
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> superiotool.txt
>
> superiotool r
> Probing for ALi Super I/O at 0x3f0...
>    Failed. Returned data: id=0x0000, rev=0x00
> Probing for ALi Super I/O at 0x370...
>    Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
>    Failed. Returned data: vid=0xffff, id=0xffff
> Probing for Fintek Super I/O at 0x4e...
>    Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
>    Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
>    Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
>    Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
>    Failed. Returned data: id=0x8100, rev=0x1
> Probing for ITE Super I/O (init=standard) at 0x4e...
>    Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
>    Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
>    Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
>    Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
>    Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
>    Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
>    Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
>    Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
>    Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
> Found SMSC SCH5307 (id=0x81, rev=0x00) at 0x2e
> No dump available for this Super I/O
> No extra registers known for this chip.
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
>    Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
>    Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
>    Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
>    Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
>    Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
>    Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
>    Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
>    Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
> Probing for Winbond Super I/O (init=0x88) at 0x370...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
>    Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
>
> flashrom mailing list
> [e-mail]
> http://www.flashrom.org/mailman/listinfo/flashrom

Tyan flash S2915 fails under linux - chip detection problem....?

[Phil]

Hi,

I posted last week, and have heard nothing back. Is  there someway I can 
help by digging further? The nice Tyan chap is positive it should work, 
but he tells me he is not the low level guru. He showed it works on his 
test system, and I am not the only one!!

I am about to stick more memory in this machine (so needing a dismantle) 
and would really like to get rid of the PCI renumbering bug , that flips 
my Nvidia graphics card(s) from PCI 5:0:0 to PCI 6:0:0 on alternate 
reboots!!! So init 5 fails......;-(

Cheers
  PHiL

Tyan flash S2915 fails under linux - chip detection problem....?

[Sean Nelson]

We are really flooded with the backlog of patches and other work. Also, 
we do all this in our free time. You're more than welcome to send in 
patches but they will need to be independently tested by someone with 
the hardware.

~ Sean

Tyan flash S2915 fails under linux - chip detection problem....?

[Michael Karcher]

Am Mittwoch, den 27.01.2010, 19:51 -0500 schrieb Phil:
> I am about to stick more memory in this machine (so needing a dismantle) 
> and would really like to get rid of the PCI renumbering bug , that flips 
> my Nvidia graphics card(s) from PCI 5:0:0 to PCI 6:0:0 on alternate 
> reboots!!! So init 5 fails......;-(

Workaround: reboot twice.

We are still having inconsistent results. As a summary of mails on the
flashrom list about the S2915(-E):

21.10.2009, Alessandro Polverini (r736): No chip found
03.12.2009, Alessandro Polverini (r791+GPIO4): No chip found
19.01.2010, Phil (r710): No chip found
28.01.2010, Allesandro Polverini, other board (r884): Chip found (SST49LF080A)
21.01.2010, Nicolas Aveline (r877;HP board): No chip found
08.12.2009, Joel Robertson (r710): Chip found (SST49LF080A)

We do not have datasheets for the chip set, we can just look what
different vendor update hooks do - and they seem to contradict each
other.

Alessandro: On your second board the chip was found. Can you please post
the output of lspci -nnvvxxx so we can compare to a board where the chip
is not found?

Regards,
  Michael Karcher

Tyan flash S2915 fails under linux - chip detection problem....?

[Phil]

Hi,

As requested using svn version of flashrom (r885) , after cold boot 
(unplugged power cable to reset buggy 3ware 9550SE). This is a machine 
running opensuse 11.2 (2.6.31.8-0.1-pae i686), with 2 AMD opeteron 2214 
HE processors and 4GB (4 x1GB ) of 667 memory. Attached are the output 
of flashrom -V -c  SST49LF080A , superiotool -deV and lspci -nnvvxxx.

Since the forced read does not produce junk, perhaps there is some 
initialisation error/unknown thing.

Cheers

PHiL

Michael Karcher wrote:
> Am Mittwoch, den 27.01.2010, 19:51 -0500 schrieb Phil:
> > I am about to stick more memory in this machine (so needing a dismantle)
> > and would really like to get rid of the PCI renumbering bug , that flips
> > my Nvidia graphics card(s) from PCI 5:0:0 to PCI 6:0:0 on alternate
> > reboots!!! So init 5 fails......;-(
>
> Workaround: reboot twice.
>
> We are still having inconsistent results. As a summary of mails on the
> flashrom list about the S2915(-E):
>
> 21.10.2009, Alessandro Polverini (r736): No chip found
> 03.12.2009, Alessandro Polverini (r791+GPIO4): No chip found
> 19.01.2010, Phil (r710): No chip found
> 28.01.2010, Allesandro Polverini, other board (r884): Chip found (SST49LF080A)
> 21.01.2010, Nicolas Aveline (r877;HP board): No chip found
> 08.12.2009, Joel Robertson (r710): Chip found (SST49LF080A)
>
> We do not have datasheets for the chip set, we can just look what
> different vendor update hooks do - and they seem to contradict each
> other.
>
> Alessandro: On your second board the chip was found. Can you please post
> the output of lspci -nnvvxxx so we can compare to a board where the chip
> is not found?
>
> Regards,
>    Michael Karcher

Tyan flash S2915 fails under linux - chip detection problem....?

[Carl-Daniel Hailfinger]

Hi everyone,

one possible explanation of the failing chip probes is the amount of RAM
in the tested machines. The common pattern of the failing machines seems
to be that they have more than 3 GB (or more than 2 GB) of RAM.
Depending on BIOS and kernel versions, this might result in cached
mapping of the flash chip and that will cause probing to fail.

So if those who have problems detecting the flash chip could physically
remove some RAM to get down to 2 GB (or less) and run flashrom again in
verbose mode (please use unpatched latest flashrom), that might give us
a hint about what is failing here.

Those who have working flash detection: Please tell us how much RAM you use.

Besides that, it would be great if you could:
- tell us the exact BIOS version
- tell us the exact kernel version
- send in the first 200 lines of your dmesg (preferably directly after boot)
- send the contents of /proc/mtrr
- send the contents of /sys/kernel/debug/x86/pat_memtype_list (may need
mounted debugfs).

Please do this for your current config and for the config with less RAM
(and tell us which is which).

I expect some very interesting revelations.

On 28.01.2010 21:05, Phil wrote:
> Michael Karcher wrote:
> > We are still having inconsistent results. As a summary of mails on the
> > flashrom list about the S2915(-E):
> >
> > 21.10.2009, Alessandro Polverini (r736): No chip found
> > 03.12.2009, Alessandro Polverini (r791+GPIO4): No chip found
> > 19.01.2010, Phil (r710): No chip found
> > 28.01.2010, Allesandro Polverini, other board (r884): Chip found
> > (SST49LF080A)
> > 21.01.2010, Nicolas Aveline (r877;HP board): No chip found
> > 08.12.2009, Joel Robertson (r710): Chip found (SST49LF080A)

Thanks for your cooperation.

Regards,
Carl-Daniel

Tyan flash S2915 fails under linux - chip detection problem....?

[Alessandro Polverini]

As usual sorry for late reply, I had to wait for a board to lay my hand on.

Answers to requested data is below.

Carl-Daniel Hailfinger wrote:
> Hi everyone,
>
> one possible explanation of the failing chip probes is the amount of RAM
> in the tested machines. The common pattern of the failing machines seems
> to be that they have more than 3 GB (or more than 2 GB) of RAM.
> Depending on BIOS and kernel versions, this might result in cached
> mapping of the flash chip and that will cause probing to fail.
>
> So if those who have problems detecting the flash chip could physically
> remove some RAM to get down to 2 GB (or less) and run flashrom again in
> verbose mode (please use unpatched latest flashrom), that might give us
> a hint about what is failing here.
>
> Those who have working flash detection: Please tell us how much RAM you use.

I installed 2GB of ram in this first run of tests.
> Besides that, it would be great if you could:
> tell us the exact BIOS version

4.01.2915
> tell us the exact kernel version

debian linux-image-2.6.32-2-amd64 version 2.6.32-7
> send in the first 200 lines of your dmesg (preferably directly after boot)

attached file flashrom-cold-output-2gb.txt
> send the contents of /proc/mtrr

reg00: base=0x000000000 (    0MB), size= 2048MB, count=1: write-back
> send the contents of /sys/kernel/debug/x86/pat_memtype_list (may need
>
> mounted debugfs).

PAT memtype list:
uncached-minus @ 0x7fde3000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fde9000-0x7fdea000
uncached-minus @ 0x7fdea000-0x7fdeb000
uncached-minus @ 0x7fdea000-0x7fdeb000
uncached-minus @ 0xb0000000-0xb0004000
uncached-minus @ 0xb0004000-0xb0005000
uncached-minus @ 0xb0005000-0xb0006000
uncached-minus @ 0xb0006000-0xb0007000
uncached-minus @ 0xb0007000-0xb0008000
uncached-minus @ 0xb0008000-0xb0009000
uncached-minus @ 0xb0009000-0xb000a000
uncached-minus @ 0xb000b000-0xb000c000
uncached-minus @ 0xb0104000-0xb0105000
uncached-minus @ 0xb0300000-0xb0301000
uncached-minus @ 0xb3000000-0xb312c000
uncached-minus @ 0xe0000000-0xe0700000
uncached-minus @ 0xfed00000-0xfed01000
> Please do this for your current config and for the config with less RAM
> (and tell us which is which).

And now the same info with 4G of ram, of course with same kernel and 
bios version.
> send in the first 200 lines of your dmesg (preferably directly after boot)

attached file flashrom-cold-output-4gb.txt
> send the contents of /proc/mtrr

reg00: base=0x000000000 (    0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size=  512MB, count=1: write-back
reg02: base=0x0a0000000 ( 2560MB), size=  256MB, count=1: write-back
> send the contents of /sys/kernel/debug/x86/pat_memtype_list (may need
>
> mounted debugfs).

PAT memtype list:
uncached-minus @ 0xafde3000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafde9000-0xafdea000
uncached-minus @ 0xafdea000-0xafdeb000
uncached-minus @ 0xafdea000-0xafdeb000
uncached-minus @ 0xb0000000-0xb0004000
uncached-minus @ 0xb0004000-0xb0005000
uncached-minus @ 0xb0005000-0xb0006000
uncached-minus @ 0xb0006000-0xb0007000
uncached-minus @ 0xb0007000-0xb0008000
uncached-minus @ 0xb0008000-0xb0009000
uncached-minus @ 0xb0009000-0xb000a000
uncached-minus @ 0xb000b000-0xb000c000
uncached-minus @ 0xb0104000-0xb0105000
uncached-minus @ 0xb0300000-0xb0301000
uncached-minus @ 0xb3000000-0xb312c000
uncached-minus @ 0xe0000000-0xe0700000
uncached-minus @ 0xfed00000-0xfed01000
> I expect some very interesting revelations.

I hope this helps!

Alex
> On 28.01.2010 21:05, Phil wrote:
> > Michael Karcher wrote:
> > > We are still having inconsistent results. As a summary of mails on the
> > > flashrom list about the S2915(-E):
> > >
> > > 21.10.2009, Alessandro Polverini (r736): No chip found
> > > 03.12.2009, Alessandro Polverini (r791+GPIO4): No chip found
> > > 19.01.2010, Phil (r710): No chip found
> > > 28.01.2010, Allesandro Polverini, other board (r884): Chip found
> > > (SST49LF080A)
> > > 21.01.2010, Nicolas Aveline (r877;HP board): No chip found
> > > 08.12.2009, Joel Robertson (r710): Chip found (SST49LF080A)
>
> Thanks for your cooperation.
>
> Regards,
> Carl-Daniel

flashrom v0.9.1-r894
No coreboot table found.
DMI string 0: "Tyan Computer Corporation "
DMI string 1: "MCP55 "
DMI string 2: "REFERENCE"
DMI string 3: "Tyan Computer Corporation "
DMI string 4: "S2915 "
DMI string 5: "REFERENCE"
Found chipset "NVIDIA MCP55", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 594M loops per second, 100 myus = 216 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Found chip "SST SST49LF080A" (1024 KB, LPC) at physical address 0xfff00000.
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x54, id2 0x3f, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to [e-mail] if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help!
===
No operations were specified.

flashrom v0.9.1-r894
No coreboot table found.
DMI string 0: "Tyan Computer Corporation "
DMI string 1: "MCP55 "
DMI string 2: "REFERENCE"
DMI string 3: "Tyan Computer Corporation "
DMI string 4: "S2915 "
DMI string 5: "REFERENCE"
Found chipset "NVIDIA MCP55", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... 595M loops per second, 100 myus = 238 us. OK.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for AMIC A25L40PT, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A25L40PU, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B05T, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B10T, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B20T, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B40T, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B80T, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B16T, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B32T, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25B64T, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Sanyo LF25FW203A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Sharp LHF00L04, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for Spansion S25FL008A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x4e, id2 0x41
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x4e, id2 0x41
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF020A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF040, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Found chip "SST SST49LF080A" (1024 KB, LPC) at physical address 0xfff00000.
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x4e, id2 0x50
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0xa0, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x54, id2 0x3f, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x4e, id2 0x41
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SyncMOS S29C31004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51001T, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51002T, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for SyncMOS S29C51004T, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W25x64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040B, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040C, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080A, 1024 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xbf, id2 0x5b
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
Please email a report to [e-mail] if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help!
===
No operations were specified.

Tyan flash S2915 fails under linux - chip detection problem....?

[Phil]

Hi there all,

I have another data point, since I upgraded the bios on my Tyan S2915 
MB, using a hacked CD and DR-DOS. After a cold boot, using the svn 
version of flashrom , the new bios (v401) made no difference to the chip 
detection problem.

I mention this, since the board had the oldest version of the bios and 
since the PCI routines had a bug (video cards change address every 
boot), there was an outside chance that my board would not respond like 
the Tyan representative's, since the bios was older.

My machine has 8 GB of memory, and I qm running a 32 bit  version of   
2.6.31.12-0.1-pae

Cheers

PHiL

Tyan flash S2915 fails under linux - chip detection problem....?

[Carl-Daniel Hailfinger]

Hi,

On 01.03.2010 17:03, Phil wrote:
> I have another data point, since I upgraded the bios on my Tyan S2915
> MB, using a hacked CD and DR-DOS. After a cold boot, using the svn
> version of flashrom , the new bios (v401) made no difference to the
> chip detection problem.
>
> I mention this, since the board had the oldest version of the bios and
> since the PCI routines had a bug (video cards change address every
> boot), there was an outside chance that my board would not respond
> like the Tyan representative's, since the bios was older.
>
> My machine has 8 GB of memory, and I qm running a 32 bit  version of  
> 2.6.31.12-0.1-pae

Oh, I didn't notice that before. Kernels with PAE support do not work
with flashrom. Can you try booting a 64 bit kernel (e.g. from a 64 bit
Linux Live CD) and run flashrom from there?

Regards,
Carl-Daniel

Tyan flash S2915 fails under linux - chip detection problem....?

[Alessandro Polverini]

Michael Karcher wrote:
> [...]
> Alessandro: On your second board the chip was found. Can you please post
> the output of lspci -nnvvxxx so we can compare to a board where the chip
> is not found?

Hello Michael,
you can find the output you requested attached.

Thanks!
Alex

00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
    	Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
    	Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
    	Revision ID: 1.03
    	Link Frequency 0: 1.0GHz
    	Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
    	Link Frequency 1: 200MHz
    	Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
    	Prefetchable memory behind bridge Upper: 00-00
    	Bus Number: 00
    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
    	Mapping Address Base: 00000000fee00000
00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: f1 10 15 29 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0364] (rev a3)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: I/O ports at 1c00 [size=128]
00: de 10 64 03 0f 00 a0 00 a3 00 01 06 00 00 80 00
10: 01 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: f1 10 15 29 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff c5 00 00 00 00 00 04 19 d8 00 00 10
80: 09 c0 00 63 41 d2 00 20 f0 00 00 00 ff 00 00 00
90: 00 08 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
a0: 03 00 10 11 00 37 00 00 00 06 8f 06 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 50 2a 00 fe fd e3 00 b0
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 255
    Region 0: I/O ports at 2000 [size=64]
    Region 4: I/O ports at 2440 [size=64]
    Region 5: I/O ports at 2400 [size=64]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: nForce2_smbus
00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 24 00 00 01 24 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 00 00
70: 01 00 00 00 00 00 04 a0 00 00 00 00 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 64 15 05 00 a5 21 50 03 80 30 80 00 77 44 44 11
f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00

00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ohci_hcd
00: de 10 6c 03 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 40 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
40: f1 10 15 29 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 19
    Region 0: Memory at a0005000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=0098
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ehci_hcd
00: de 10 6d 03 06 00 b0 00 a2 20 03 0c 00 00 80 00
10: 00 50 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
40: f1 10 15 29 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 00 00 10 20 80 89 3d b6 22 77 25 04 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 01 00 00 08 80 00 00 00 00 00 00 00 00
b0: 22 11 00 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    Region 4: I/O ports at 2480 [size=16]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: AMD_IDE
00: de 10 6e 03 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 24 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: f1 10 15 29 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 00 00 00 00 00 00 a8 a8 a8 a8 af 00 ff 99
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 12 00 00 00 00 00 00 00

00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at 24d0 [size=8]
    Region 1: I/O ports at 24c4 [size=4]
    Region 2: I/O ports at 24c8 [size=8]
    Region 3: I/O ports at 24c0 [size=4]
    Region 4: I/O ports at 2490 [size=16]
    Region 5: Memory at a0006000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
    	Address: 0000000000000000  Data: 0000
    Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
    Kernel driver in use: sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: d1 24 00 00 c5 24 00 00 c9 24 00 00 c1 24 00 00
20: 91 24 00 00 00 60 00 a0 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01
40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 00 00 80 00 00 00 00 00 1d 00 00 00 60 09 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 49 df f3 3f 00 00 09 22 66 56 bb fe
90: 00 00 6f 35 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 40 00 00 00 00 00 00 00 23 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 0a 00 02 03 42 00 00 00 00 00 00 00 00 00 00 00
e0: 0a 00 02 03 42 00 00 00 00 00 00 00 00 00 b0 07
f0: 00 00 00 00 00 00 00 00 12 00 0c 00 00 00 00 00

00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 16
    Region 0: I/O ports at 24e8 [size=8]
    Region 1: I/O ports at 24dc [size=4]
    Region 2: I/O ports at 24e0 [size=8]
    Region 3: I/O ports at 24d8 [size=4]
    Region 4: I/O ports at 24a0 [size=16]
    Region 5: Memory at a0007000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
    	Address: 0000000000000000  Data: 0000
    Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
    Kernel driver in use: sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: e9 24 00 00 dd 24 00 00 e1 24 00 00 d9 24 00 00
20: a1 24 00 00 00 70 00 a0 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01
40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 00 00 80 00 00 00 00 00 1d 00 00 00 60 09 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 e6 bf e7 16 00 00 6f 09 5e ff 5b f3
90: 00 00 a7 36 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 40 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 0a 00 02 03 42 00 00 00 00 00 00 00 01 00 e0 07
e0: 0a 00 02 03 42 00 00 00 00 00 00 00 0b 02 34 07
f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00

00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin C routed to IRQ 22
    Region 0: I/O ports at 2800 [size=8]
    Region 1: I/O ports at 24f4 [size=4]
    Region 2: I/O ports at 24f8 [size=8]
    Region 3: I/O ports at 24f0 [size=4]
    Region 4: I/O ports at 24b0 [size=16]
    Region 5: Memory at a0008000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
    	Address: 0000000000000000  Data: 0000
    Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
    Kernel driver in use: sata_nv
00: de 10 7f 03 07 00 b0 00 a3 85 01 01 00 00 80 00
10: 01 28 00 00 f5 24 00 00 f9 24 00 00 f1 24 00 00
20: b1 24 00 00 00 80 00 a0 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 03 03 01
40: f1 10 15 29 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 00 00 80 00 00 00 00 00 1d 00 00 00 60 09 00
60: 00 00 00 00 41 0c 00 00 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00
80: 00 00 00 c0 ba 93 c0 fe 00 00 8c 30 5e 3d db ff
90: 00 00 43 32 00 00 00 00 06 00 06 10 7f 03 01 01
a0: 12 0a 00 00 40 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 03 a8
d0: 0a 00 02 03 42 00 00 00 00 00 00 00 80 41 01 05
e0: 0a 00 02 03 42 00 00 00 00 00 00 00 0f 00 20 00
f0: 00 00 00 00 00 00 00 00 10 00 0c 00 00 00 00 00

00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    Memory behind bridge: a0100000-a01fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
    Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
    Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
00: de 10 70 03 07 01 b0 00 a2 01 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 02
20: 10 a0 10 a0 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 ff 00 04 0a
40: 00 00 33 07 01 00 02 00 05 00 00 00 00 00 48 00
50: 00 00 fe 9f 00 00 00 00 ff 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 fe 5f 04 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 de 10 84 cb
c0: de 10 84 cb 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin B routed to IRQ 21
    Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    	Address: 0000000000000000  Data: 0000
    	Masking: 00000000  Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
    Kernel driver in use: HDA Intel
00: de 10 71 03 06 00 b0 00 a2 00 03 04 00 00 80 00
10: 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 02 05
40: f1 10 15 29 01 50 02 c0 00 00 00 00 01 01 0f 00
50: 05 6c 80 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 0f 00 00 00 08 00 03 a8
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 47 10 29 00 00 00 00 00 00

00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 54
    Region 0: Memory at a0009000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 2808 [size=8]
    Region 2: Memory at a0005800 (32-bit, non-prefetchable) [size=256]
    Region 3: Memory at a0005400 (32-bit, non-prefetchable) [size=16]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
    Capabilities: [70] MSI-X: Enable- Count=8 Masked-
    	Vector table: BAR=2 offset=00000000
    	PBA: BAR=3 offset=00000000
    Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
    	Address: 00000000fee0f00c  Data: 41b9
    	Masking: 000000fe  Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
    Kernel driver in use: forcedeth
00: de 10 73 03 07 04 b0 00 a3 00 80 06 00 00 00 00
10: 00 90 00 a0 09 28 00 00 00 58 00 a0 00 54 00 a0
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 01 14
40: f1 10 15 29 01 70 02 fe 00 01 00 00 0c 00 00 00
50: 05 6c 87 01 0c f0 e0 fe 00 00 00 00 b9 41 00 00
60: fe 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00

00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at a000b000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 2810 [size=8]
    Region 2: Memory at a000a000 (32-bit, non-prefetchable) [size=256]
    Region 3: Memory at a0005c00 (32-bit, non-prefetchable) [size=16]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] MSI-X: Enable- Count=8 Masked-
    	Vector table: BAR=2 offset=00000000
    	PBA: BAR=3 offset=00000000
    Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
    	Address: 0000000000000000  Data: 0000
    	Masking: 00000000  Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
    Kernel driver in use: forcedeth
00: de 10 73 03 07 00 b0 00 a3 00 80 06 00 00 00 00
10: 00 b0 00 a0 11 28 00 00 00 a0 00 a0 00 5c 00 a0
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
40: f1 10 15 29 01 70 02 fe 00 00 00 00 0c 00 00 00
50: 05 6c 86 01 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 ff 00 00 00 08 00 03 a8
70: 11 50 07 00 02 00 00 00 03 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 11 00 00 00 52 01 00 00 00 00 00 00

00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    	Address: 00000000fee0f00c  Data: 4151
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- RBE+ FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    		ClockPM- Surprise- LLActRep+ BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    		Control: AttnInd Off, PwrInd On, Power- Interlock-
    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    		Changed: MRL- PresDet- LinkState-
    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    	RootCap: CRSVisible-
    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Kernel driver in use: pcieport
00: de 10 76 03 47 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 51 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 81 3c 11 05
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: a0200000-a03fffff
    Prefetchable memory behind bridge: 00000000a0800000-00000000a0ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    	Address: 00000000fee0f00c  Data: 4159
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- RBE+ FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    		ClockPM- Surprise- LLActRep+ BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    		Control: AttnInd Off, PwrInd On, Power- Interlock-
    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    		Changed: MRL- PresDet+ LinkState+
    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    	RootCap: CRSVisible-
    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Kernel driver in use: pcieport
00: de 10 78 03 47 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 05 00 31 31 00 00
20: 20 a0 30 a0 81 a0 f1 a0 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 59 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
90: 00 00 41 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: 00004000-00004fff
    Memory behind bridge: a0400000-a04fffff
    Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    	Address: 00000000fee0f00c  Data: 4161
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- RBE+ FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    		ClockPM- Surprise- LLActRep+ BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    		Control: AttnInd Off, PwrInd On, Power- Interlock-
    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    		Changed: MRL- PresDet+ LinkState+
    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    	RootCap: CRSVisible-
    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Kernel driver in use: pcieport
00: de 10 77 03 47 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 06 06 00 41 41 00 00
20: 40 a0 40 a0 01 b0 f1 bf 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 0c 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 61 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Revision ID: 1.02
    	Link Frequency: 1.0GHz
    	Link Error: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
    Capabilities: [a0] HyperTransport: Host or Secondary Interface
    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Revision ID: 1.02
    	Link Frequency: 1.0GHz
    	Link Error: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
    Capabilities: [c0] HyperTransport: Host or Secondary Interface
    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Revision ID: 1.02
    	Link Frequency: 1.0GHz
    	Link Error: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 03 00 02 04 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 10 00 03 00 e4 02 00 00 20 c8 2e 0f 3c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 36 61 34 01 00 00 00 00 03 00 00 00 00 00 00 00
a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
b0: 01 0f 11 06 00 00 00 00 03 00 00 00 00 00 00 00
c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
d0: 69 01 61 01 00 00 7f 00 07 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 5f 02 03 00 60 02 01 00 5f 04
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
90: 03 00 c0 00 01 ff cf 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
c0: 33 10 00 00 20 40 00 00 03 50 00 00 01 50 00 00
d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
e0: 03 02 00 7f 13 00 80 ff 30 02 f7 bd 70 02 ff 2e
f0: 01 60 00 a0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 02 00 00 01 04 00 00 01 06 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 39 f8 01 e0 39 f8 01 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 66 00 00 00 00 00 00 00 24 ca 69 cf 20 13 92 00
90: 10 38 00 00 6a 80 00 64 39 00 00 80 00 00 00 00
a0: eb 02 00 cf 00 00 00 00 00 00 00 00 00 00 00 00
b0: 7a 4d 4d 52 69 00 00 00 c7 7f c8 00 b0 a7 08 8c
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: c3 d2 24 85 c3 29 93 9c cf 3b 80 89 41 56 ee 02
e0: c1 df 1a 5f 41 10 d9 39 ea c9 92 fb 63 d3 ee c8
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [f0] Secure device <?>
    Kernel driver in use: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 40 99 07 ff
60: de 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
90: 03 00 00 00 10 00 00 00 00 fe 5d 04 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 06 a7 e2 04 10 27 80 20 26 26 25 00
e0: 00 00 00 00 24 1b 6e 00 1b 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 13 0f 04 00

00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Revision ID: 1.02
    	Link Frequency: 1.0GHz
    	Link Error: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
    Capabilities: [a0] HyperTransport: Host or Secondary Interface
    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Revision ID: 1.02
    	Link Frequency: 1.0GHz
    	Link Error: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
    Capabilities: [c0] HyperTransport: Host or Secondary Interface
    	Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Revision ID: 1.02
    	Link Frequency: 1.0GHz
    	Link Error: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 04 08 01 00 01 01 05 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 11 00 03 00 e4 00 00 00 20 c8 2e 0f 04 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 a0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 6a 01 61 01 00 80 ff 00 07 00 00 00 00 00 00 00
a0: 08 c0 01 21 20 00 11 11 22 06 75 80 02 00 00 00
b0: 36 61 34 01 00 00 00 00 03 00 00 00 00 00 00 00
c0: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
d0: 01 0f 11 06 00 00 00 00 03 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 5f 02 03 00 60 02 01 00 5f 04
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 00 a0 00 20 ff bf 00 00 00 00 00 00 00 00 00
90: 03 00 c0 00 01 ff cf 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 0a 00 00 20 0b 00 00
b0: 03 00 e0 00 a0 ff e7 00 03 00 e8 00 81 ff ef 00
c0: 33 10 00 00 20 40 00 00 03 50 00 00 01 50 00 00
d0: 00 00 00 00 00 00 00 00 03 f0 00 00 01 f0 00 00
e0: 03 02 00 7f 13 00 80 ff 30 02 f7 bd 70 02 ff 2e
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 02 00 00 01 04 00 00 01 06 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 39 f8 01 e0 39 f8 01 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 66 00 00 00 00 00 00 00 24 ca 69 cf 20 13 92 00
90: 10 38 00 00 6a 80 00 64 39 00 00 80 00 00 00 00
a0: eb 02 00 cf 00 00 00 00 00 00 00 00 00 00 00 00
b0: 11 1b 53 52 69 00 00 00 1a 4c 00 64 30 1c 7d 03
c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 9c 99 ed 57 a0 5b 0a 08 7f f5 1d 0f 14 60 76 b7
e0: 1c 4f dd 57 04 5c 5a 87 fe f5 09 14 af 35 b4 bb
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Capabilities: [f0] Secure device <?>
    Kernel driver in use: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 04 c0 f6
60: dd 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00
80: 00 00 07 23 13 21 13 00 00 00 00 00 00 00 00 00
90: 03 00 00 00 10 00 00 00 00 fe 5d 04 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 06 a7 e2 04 10 27 50 20 25 26 26 00
e0: 00 00 00 00 24 1b 61 00 1b 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 12 0f 04 00

01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at a0104000 (32-bit, non-prefetchable) [size=2K]
    Region 1: Memory at a0100000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: firewire_ohci
00: 4c 10 23 80 56 01 10 02 00 10 00 0c 10 40 00 00
10: 00 40 10 a0 00 00 10 a0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
40: 00 00 00 00 01 00 02 7e 00 80 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 10 00 00 f1 10 15 29 00 00 00 00

03:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=03, secondary=04, subordinate=04, sec-latency=68
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: a0300000-a03fffff
    Prefetchable memory behind bridge: 00000000a0800000-00000000a0ffffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
    	LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us
    		ClockPM- Surprise- LLActRep- BwNot-
    	LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [54] PCI-X bridge device
    	Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
    	Status: Dev=03:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
    	Upstream: Capacity=32 CommitmentLimit=32
    	Downstream: Capacity=16 CommitmentLimit=16
    Capabilities: [64] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    	Bridge: PM- B3+
    Capabilities: [100] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
00: 33 10 25 01 47 01 10 00 06 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 03 04 04 44 31 31 20 04
20: 30 a0 30 a0 81 a0 f1 a0 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 10 54 71 00 01 00 00 00 00 20 0a 00 81 6c 02 00
50: 00 00 41 00 07 64 03 00 00 03 00 00 20 00 20 00
60: 10 00 10 00 01 00 42 da 00 00 c0 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 1f 3f 00 00 00 00
90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

03:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Region 0: Memory at a0200000 (64-bit, non-prefetchable) [size=128]
    Bus: primary=03, secondary=05, subordinate=05, sec-latency=4
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) PCI/PCI-X Bridge, MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <4us, L1 <16us
    		ClockPM- Surprise- LLActRep- BwNot-
    	LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [54] PCI-X bridge device
    	Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
    	Status: Dev=03:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
    	Upstream: Capacity=32 CommitmentLimit=32
    	Downstream: Capacity=16 CommitmentLimit=16
    Capabilities: [64] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    	Bridge: PM- B3+
    Capabilities: [6c] MSI: Enable- Count=1/1 Maskable- 64bit+
    	Address: 0000000000000000  Data: 0000
    Capabilities: [7c] Hot-plug capable
    Capabilities: [100] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
00: 33 10 25 01 47 01 10 00 06 00 04 06 10 00 81 00
10: 04 00 20 a0 00 00 00 00 03 05 05 04 f1 01 20 24
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 04 00
40: 10 54 71 00 01 00 00 00 00 20 00 00 81 6c 02 00
50: 00 00 41 00 07 64 03 00 01 03 00 00 20 00 20 00
60: 10 00 10 00 01 6c 42 da 00 00 c0 00 05 7c 80 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 13 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:04.0 RAID bus controller [0104]: 3ware Inc 9xxx-series SATA-RAID [13c1:1002]
    Subsystem: 3ware Inc 9xxx-series SATA-RAID [13c1:1002]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (2250ns min), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: I/O ports at 3000 [size=256]
    Region 1: Memory at a0300000 (64-bit, non-prefetchable) [size=256]
    Region 3: Memory at a0800000 (64-bit, prefetchable) [size=8M]
    [virtual] Expansion ROM at a0310000 [disabled] [size=64K]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: 3w-9xxx
00: c1 13 02 10 5f 01 30 02 00 00 04 01 10 40 00 00
10: 01 30 00 00 04 00 30 a0 00 00 00 00 0c 00 80 a0
20: 00 00 00 00 00 00 00 00 00 00 00 00 c1 13 02 10
30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 01 09 00
40: 07 48 00 00 f8 ff 03 00 01 00 02 5a 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

06:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV515 [Radeon X1300] [1002:7146] (prog-if 00 [VGA controller])
    Subsystem: PC Partner Limited Device [174b:0840]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M]
    Region 2: Memory at a0400000 (64-bit, non-prefetchable) [size=64K]
    Region 4: I/O ports at 4000 [size=256]
    [virtual] Expansion ROM at a0420000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Express (v1) Endpoint, MSI 00
    	DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    		ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 128 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
    		ClockPM- Surprise- LLActRep- BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
    	Address: 0000000000000000  Data: 0000
00: 02 10 46 71 47 01 10 00 00 00 00 03 10 00 80 00
10: 0c 00 00 b0 00 00 00 00 04 00 40 a0 00 00 00 00
20: 01 40 00 00 00 00 00 00 00 00 00 00 4b 17 40 08
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 40 08
50: 01 58 02 06 00 00 00 00 10 80 01 00 a0 0f 00 00
60: 10 08 00 00 01 0d 00 00 00 00 01 11 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

06:00.1 Display controller [0380]: ATI Technologies Inc RV515 [Radeon X1300] (Secondary) [1002:7166]
    Subsystem: PC Partner Limited Device [174b:0841]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Region 0: Memory at a0410000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [50] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Express (v1) Endpoint, MSI 00
    	DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    		ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		MaxPayload 128 bytes, MaxReadReq 128 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
    		ClockPM- Surprise- LLActRep- BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
00: 02 10 66 71 07 00 10 00 00 00 80 03 10 00 00 00
10: 04 00 41 a0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 41 08
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 02 06 00 00 00 00 10 00 01 00 80 0f 00 00
60: 00 00 00 00 01 0d 00 00 00 00 01 11 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

80:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
    	Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
    	Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
    	Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
    	Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
    	Revision ID: 1.03
    	Link Frequency 0: 1.0GHz
    	Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
    	Link Frequency 1: 200MHz
    	Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
    	Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
    	Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
    	Prefetchable memory behind bridge Upper: 00-00
    	Bus Number: 00
    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
    	Mapping Address Base: 00000000fee00000
00: de 10 69 03 06 00 b0 00 a2 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: f1 10 15 29 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 06 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 0a 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 23 99 88 00 fa 00 64 0e 02 00 00 00 7f 00 00 00
90: 70 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 80 00 0f 0f
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

80:01.0 RAM memory [0500]: nVidia Corporation MCP55 LPC Bridge [10de:0361] (rev a3)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: I/O ports at fc00 [size=128]
    Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
00: de 10 61 03 0f 00 a0 00 a3 00 00 05 00 00 80 00
10: 01 fc 00 00 00 00 00 c0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: f1 10 15 29 00 00 00 00 fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 ff
70: 10 00 ff ff 43 00 00 00 00 00 42 20 00 00 00 00
80: 00 00 00 00 00 00 00 00 f0 00 00 01 80 00 00 00
90: 00 00 00 00 00 00 00 00 21 47 95 86 ef cd ab 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 44 00 00 fe fd 03 00 a0
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

80:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
    Subsystem: Tyan Computer Device [10f1:2915]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 255
    Region 0: I/O ports at 5000 [size=64]
    Region 4: I/O ports at 5440 [size=64]
    Region 5: I/O ports at 5400 [size=64]
    Capabilities: [44] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: nForce2_smbus
00: de 10 68 03 01 00 b0 00 a3 00 05 0c 00 00 80 00
10: 01 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 54 00 00 01 54 00 00 00 00 00 00 f1 10 15 29
30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 01 00 00
40: f1 10 15 29 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 f0 00 00 01 f4 00 00 01 f8 00 00 00 00 00 00
70: 01 00 00 00 00 00 04 c0 00 00 00 00 01 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: e6 16 05 00 a5 21 50 03 80 ff f7 00 61 44 44 11
f0: 5a ff 5f 3f 00 00 00 c0 10 00 00 00 00 00 00 00

80:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    	Address: 00000000fee0f00c  Data: 4169
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- RBE+ FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #5, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    		ClockPM- Surprise- LLActRep+ BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    		Control: AttnInd Off, PwrInd On, Power- Interlock-
    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    		Changed: MRL- PresDet- LinkState-
    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    	RootCap: CRSVisible-
    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Kernel driver in use: pcieport
00: de 10 76 03 47 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 80 81 81 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 69 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 81 3c 11 05
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

80:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    	Address: 00000000fee0f00c  Data: 4171
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- RBE+ FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    		ClockPM- Surprise- LLActRep+ BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    		Control: AttnInd Off, PwrInd On, Power- Interlock-
    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    		Changed: MRL- PresDet+ LinkState-
    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    	RootCap: CRSVisible-
    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Kernel driver in use: pcieport
00: de 10 78 03 47 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 80 82 82 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 71 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 41 3c 11 02
90: 00 00 41 10 00 00 00 00 c0 01 48 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

80:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=80, secondary=83, subordinate=83, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    	Address: 00000000fee0f00c  Data: 4179
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    	Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    	DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    		ExtTag- RBE+ FLReset-
    	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		MaxPayload 128 bytes, MaxReadReq 512 bytes
    	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    	LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    		ClockPM- Surprise- LLActRep+ BwNot-
    	LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    		ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    	LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    	SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
    		Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
    	SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    		Control: AttnInd Off, PwrInd On, Power- Interlock-
    	SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    		Changed: MRL- PresDet- LinkState-
    	RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    	RootCap: CRSVisible-
    	RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [160] Advanced Error Reporting
    	UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    	UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    	CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
    	CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    	AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Kernel driver in use: pcieport
00: de 10 77 03 47 05 10 00 a3 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 80 83 83 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00
40: 0d 48 00 00 de 10 00 00 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c f0 e0 fe 00 00 00 00 79 41 00 00
60: 08 80 00 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 10 28 00 00 01 3d 11 00
90: 00 00 01 11 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[PATCH] experimental patch for HP branded Tyan S2915

[Michael Karcher]

This patch may or may not help the HP xw9400 workstation with the
undetected flash chip. Please test.

Signed-off-by: Michael Karcher 
---
 board_enable.c |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/board_enable.c b/board_enable.c
index 2c836a9..6970be2 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -478,6 +478,7 @@ static int nvidia_mcp_gpio_set(int gpio, int raise)
        dev = pci_dev_find_vendorclass(0x10DE, 0x0C05);
        switch (dev->device_id) {
        case 0x0264: /* MCP51 */
+	    case 0x0364: /* MCP55 */
    	break;
        default:
    	fprintf(stderr,
@@ -513,6 +514,26 @@ static int nvidia_mcp_gpio2_raise(const char *name)
  */
 static int nvidia_mcp_gpio5_raise(const char *name)
 {
+	/* experimental stuff - maybe it helps the hidden flash
+	   chip problem on Tyan S2915-E */
+	struct pci_dev * dev;
+	uint16_t base;
+	uint16_t tmp;
+	dev = pci_dev_find(0x10de,0x0364);
+	if(!dev) {
+		fprintf(stderr, "SMBus bridge not found?!\n");
+		return -1;
+	}
+	base = pci_read_long(dev,0x60) & 0xFF00;
+	if(base < 0x400) {
+		fprintf(stderr, "bogus I/O base %04x\n", base);
+		return -1;
+	}
+	tmp = INW(base+2);
+	tmp &= 0xFEFF;
+	OUTW(tmp, base+2);
+
+	/* Obvious stuff for the HP variant */
    return nvidia_mcp_gpio_set(0x05, 1);
 }