your mail got filtered because the attachment was too big. We have a 256KiB limit. I'll quote the relevant lines of the picture. Full message below.
Found chipset "Intel Braswell". Warning: Setting Bios Control at 0x0 from 0x2a to 0x09 failed. New value is 0x2a.
This means the currently running BIOS has disabled writes and prevents flashrom from changing that setting.
There is one thing you can try: Sometimes, in the BIOS setup there's an option to allow flashing. If present, it's usually something about `BIOS protection` or `Flash protection` or something about updates.
Hope that helps, Nico
On 02.04.19 18:14, Dominique Wille wrote:
Great software that you do manage here....
We are using it quite extensively to prepare some thick-clients (make the setup faster...).
On new ones we have an issue we never experienced (picture attached) [image: image.png]
Do you think there is something we can do more ? What do you think ? Is-there any thing that we could do ?
Dominique Wille, *Plantformance AG* Cell : *+41 78 735 69 70* email@example.com