Multiple NICs - not selectable

[Mark Brown]

All,

I have run into the following:

#flashrom -p nicrealtek:00:0c.0
flashrom v0.9.2-r1141 on Linux 2.6.32-5-686 (i686), built with libpci
3.1.7, GCC 4.4.5 20100728 (prerelease), little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 00:0c.0).
Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 00:08.0).
Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:bb:dd.f'
to explicitly select the card with the given BDF (PCI bus, device,
function).

Should be correct to select the first PCI card right?

Mark

[Stefan Tauner]

On Mon, 12 Mar 2012 20:53:22 -0400
Mark Brown  wrote:
> All,
>
> I have run into the following:
>
> #flashrom -p nicrealtek:00:0c.0
> flashrom v0.9.2-r1141 on Linux 2.6.32-5-686 (i686), built with libpci
> 3.1.7, GCC 4.4.5 20100728 (prerelease), little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OK.
> Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 00:0c.0).
> Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 00:08.0).
> Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:bb:dd.f'
> to explicitly select the card with the given BDF (PCI bus, device,
> function).
>
> Should be correct to select the first PCI card right?

dunno about that *ancient* version (please update), but in the current
version it would be flashrom -p nicrealtek:pci=00:0c.0 i think