Re: [flashrom] [PATCH 1/5] rayer_spi: Create list of programmer types

[Kyösti Mälkki]

-------- Forwarded Message --------
From: Andrew Tarabaras 
To: Kyösti Mälkki 
Subject: Re: [PATCH 1/5] rayer_spi: Create list of programmer types
Date: Tue, 2 Apr 2013 13:21:09 +1100

Hi Kyösti,

I finally got to testing and it works fine. I used a xilinx buffered
DLC5 Parallel 3 cable with rayer_spi driver.

I also programmed an unsupported SPI Eprom. a PMC PM25LD010, I just
copied the PM25LV010 definition and renamed it to PM25LD010

and read / write / erase is verified to work.

I would like to contribute more but I just dont have the time to be
submitting patches.

Best Regards

Andrew

On Fri, Mar 8, 2013 at 3:39 AM, Andrew Tarabaras 
wrote:
        Hi,

Forgot to get back to your last email. Sorry.  I will test it in
        a few days.

Regards
        Andrew

On 08/03/2013 3:18 AM, "Kyösti Mälkki" 
        wrote:
                Hi

It would be great if you can test the updated patchset
                with new
                rayer_spi pinouts on actual hardware.

https://bitbucket.org/kmalkki/flashrom/get/rayer_spi.tar.bz2

or

git clone -b rayer_spi
                https://bitbucket.org/kmalkki/flashrom.git

Thanks,
                  Kyösti

PM25LD010 (was: rayer_spi: Create list of programmer types)

[Stefan Tauner]

On Tue, 02 Apr 2013 09:00:51 +0300
Kyösti Mälkki  wrote:
> I also programmed an unsupported SPI Eprom. a PMC PM25LD010, I just
> copied the PM25LV010 definition and renamed it to PM25LD010

And changed the chip ID from 0x7C to 0x21, I presume?

Coincidently I have been working on some PMC chips including yours
yesterday. The result can be seen here:
http://patchwork.coreboot.org/patch/3926/
http://patchwork.coreboot.org/patch/3925/

If it is not too much of a hassle could you please apply those patches
(to r1666), retest and send a verbose write log?

Please keep the mailing list in the list of addressees so everyone sees
what you reply.