New subject: [PATCH] ft2232_spi.c: add frequency divider parameter.

28 Feb 2012

On 2012年02月28日 10:48, Stefan Tauner wrote:
...
This adds an extra argument when using the ft2232_spi programmer to set
the frequency divider. The valid values for the divider is any even integer
between 2 and 131072.
Signed-off-by: Samir Ibradžićsibradzic@gmail.com
Signed-off-by: Stefan Taunerstefan.tauner@student.tuwien.ac.at

this was totally broken even without Samir's version of the patch applied.
it might be a better idea to let the user specify the actual frequency instead of
the divisor like some other programmers do (serprog and buspirate).
Well, it may be more clear to specify exact frequencies, but we may end 
up with weird set of frequencies for all these large dividers.
Maybe it would be better to support a limited set of "standard" dividers 
and their corresponding frequencies, like:
divider | freq
--------+--------
2       | 30MHz
4       | 15MHz
6       | 10MHz
8       | 7.5MHz
10      | 6MHz
12      | 5MHz
20      | 3MHz
30      | 2MHz
60      | 1MHz
80      | 750KHz
100     | 600KHz
120     | 500KHz
150     | 400KHz
200     | 300KHz
300     | 200KHz
600     | 100KHz
800     | 75KHz
1000    | 60KHz
1200    | 50KHz
1500    | 40KHz
2000    | 30KHz
3000    | 20KHz
6000    | 10KHz
8000    | 7.5KHz
(and so on)
But i vote for supporting specific divider after all, one can never know 
if there is some obscure device out there in the wild that supports only 
6365372Hz.
...
TODO: man page
ft2232_spi.c |   54 +++++++++++++++++++++++++++++++++++++-----------------
  1 files changed, 37 insertions(+), 17 deletions(-)

diff --git a/ft2232_spi.c b/ft2232_spi.c
index 122866f..7d598b1 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -64,17 +64,8 @@ const struct usbdev_status devs_ft2232spi[] = {
   {},
  };
-/*


The 'H' chips can run internally at either 12MHz or 60MHz.



The non-H chips can only run at 12MHz.


*/

-static uint8_t clock_5x = 1;
-/*


In either case, the divisor is a simple integer clock divider.



If clock_5x is set, this divisor divides 30MHz, else it divides 6MHz.


*/

-#define DIVIDE_BY 3  /* e.g. '3' will give either 10MHz or 2MHz SPI clock. */
+#define DEFAULT_DIVISOR 2
#define BITMODE_BITBANG_NORMAL	1
  #define BITMODE_BITBANG_SPI	2
@@ -162,12 +153,28 @@ static const struct spi_programmer spi_programmer_ft2232 = {
  /* Returns 0 upon success, a negative number upon errors. */
  int ft2232_spi_init(void)
  {

int f, ret = 0;


int ret = 0;
struct ftdi_context *ftdic =&ftdic_context;
unsigned char buf[512];
int ft2232_vid = FTDI_VID;
int ft2232_type = FTDI_FT4232H_PID;
enum ftdi_interface ft2232_interface = INTERFACE_B;
/*
* The 'H' chips can run with an internal clock of either 12 MHz or 60 MHz,


* but the non-H chips can only run at 12 MHz. We enable the divide-by-5


* prescaler on the former to run on the same speed.


*/


uint8_t clock_5x = 1;
/* In addition to the prescaler mentioned above there is also another
* configurable one on all versions of the chips. Its divisor div can be


* set by a 16 bit value x according to the following formula:


* div = (1 + x) * 2<->  x = div / 2 - 1


* Hence the expressible divisors are all even numbers between 2 and


* 2^17 (=131072) resulting in SCK frequencies of 2 MHz down to about


* 92 Hz for 12 MHz inputs.


*/


uint32_t divisor = DEFAULT_DIVISOR;
int f;
char *arg;
double mpsse_clk;

@@ -243,6 +250,21 @@ int ft2232_spi_init(void)
   	}
   }
   free(arg);

arg = extract_programmer_param("divisor");
if (arg&&  strlen(arg)) {
unsigned int temp = 0;


char *endptr;


temp = strtoul(arg,&endptr, 10);


if (*endptr || temp<  2 || temp>  131072 || temp&  0x1) {


	msg_perr("Error: Invalid SPI frequency divisor specified: \"%s\".\n"


		 "Valid are even values between 2 and 131072.\n", arg);


	free(arg);


	return -2;


} else {


	divisor = (uint32_t)temp;


}


}
free(arg);
msg_pdbg("Using device type %s %s ",
get_ft2232_vendorname(ft2232_vid, ft2232_type),
get_ft2232_devicename(ft2232_vid, ft2232_type));

@@ -303,17 +325,15 @@ int ft2232_spi_init(void)
msg_pdbg("Set clock divisor\n");
   buf[0] = 0x86;		/* command "set divisor" */

/* valueL/valueH are (desired_divisor - 1) */
buf[1] = (DIVIDE_BY - 1)&  0xff;
buf[2] = ((DIVIDE_BY - 1)>>  8)&  0xff;
if (send_buf(ftdic, buf, 3)) {
ret = -6;
goto ftdi_err;
}


buf[1] = (divisor / 2 - 1)&  0xff;
buf[2] = ((divisor / 2 - 1)>>  8)&  0xff;


msg_pdbg("MPSSE clock: %f MHz divisor: %d "
 "SPI clock: %f MHz\n", mpsse_clk, DIVIDE_BY,


 (double)(mpsse_clk / (((DIVIDE_BY - 1) + 1) * 2)));




msg_pdbg("MPSSE clock: %f MHz, divisor: %u, SPI clock: %f MHz\n",

 mpsse_clk, divisor, (double)(mpsse_clk / divisor));


/* Disconnect TDI/DO to TDO/DI for loopback. */
msg_pdbg("No loopback of TDI/DO TDO/DI\n");



    

Re: [flashrom] [PATCH] ft2232_spi.c: add frequency divider parameter.

TODO: man page