Re: [coreboot] flashrom patch: add support for Abit AB-BM6 board

[Carl-Daniel Hailfinger]

Hi Tim,

it seems your flashrom patch from exactly two years ago slipped through
the cracks until now. I'm very sorry about that.

Do you still own the board? If yes, could you please run download latest
flashrom (at least 0.9.2, preferably latest svn) and provide the output
of the following commands (as root):
flashrom -V
superiotool -deV

flashrom supports DMI matching since a few months, so it may be possible
to identify your board that way. And with superiotool output, we could
perhaps improve matching a bit more.
You already provided full lspci -nnvvxx output at
http://marc.info/?l=linuxbios&m=122276697617977&w=2 so I'm not going to
request that again. (I couldn't link to the coreboot.org mailing list
archives because that message is corrupt).

On 03.09.2008 11:42, Tim ter Laak wrote:
> This patch adds support for the Abit AB-BM6 mainboard to flashrom.
>
> The biggest part is a generic function to lower a GPIO line on the
> PIIX4E southbridge, copied and adapted from its ich_gpio_raise()
> counterpart (mostly lower instead of raise, followed names from the
> PIIX4E datasheet). The board specific function then uses this to lower
> GPO 26.
>
> Signed-off-by: Tim ter Laak
>
> +/**
> Suited for Abit AB-BM6.
> */
>
> +static int piix4_gpio26_lower(const char *name)
> +{
> return piix4_gpio_lower(name, 0x8086, 0x7113, 0x40, 0x34, 0xffc0, 26);

With current flashrom, the line above would look like this:
return intel_piix4_gpo_set(26, 0);
> +}
>
> +/**
> Suited for Acorp 6A815EPD.
>
> */
> static int board_acorp_6a815epd(const char *name)
> @@ -672,6 +724,8 @@
> NULL, NULL, "GIGABYTE GA-7VT600", board_biostar_p4m80_m4},
> {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c,
> NULL, NULL, "MSI K8T Neo2", w83627thf_gpio4_4_raise_2e},
> {0x8086, 0x7190, 0x0000, 0x0000, 0x8086, 0x7110, 0x0000, 0x0000,
> "abit", "ab-bm6", "Abit AB-BM6", piix4_gpio26_lower},
>
> {0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL} /* Keep this */
> };

If DMI is useful on your board, we could try to match the DMI strings
and avoid the -m abit:ab-bm6 parameter for flashrom.

Regards,
Carl-Daniel

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Tim ter Laak]

On Sat, 4 Sep 2010, Carl-Daniel Hailfinger wrote:
> Hi Tim,
>
> it seems your flashrom patch from exactly two years ago slipped through
> the cracks until now. I'm very sorry about that.

No problem. To be honest, I thought you as maintainers were, for 
understandable reasons, not too keen on letting in too many new board ID 
parameters at the time. I actually considered the thread properly 
closed, no bad feelings there.
> Do you still own the board? If yes, could you please run download latest
> flashrom (at least 0.9.2, preferably latest svn) and provide the output
> of the following commands (as root):
> flashrom -V
> superiotool -deV

I do, as a matter of fact I use it every now and again to program the 
occasional flash rom :)
The full output is appended in-line to the end of this mail.
> flashrom supports DMI matching since a few months, so it may be possible
> to identify your board that way. And with superiotool output, we could
> perhaps improve matching a bit more.
> If DMI is useful on your board, we could try to match the DMI strings
> and avoid the -m abit:ab-bm6 parameter for flashrom.

The combination of the 'baseboard-manufacturer' and 
'baseboard-product-name' DMI strings looks promising.
(The empty contents of other strings is completely in line with 
expectations; after all the BIOS didn't bother to assign subsystem IDs to 
the PCI devices of the chipset either.)

I'll be poking around in the source in the next few days to port my patch 
to the current version of flashrom. It would take a while to get up to 
speed again though, so I'm also open to testing other people's patches.

Kind regards,

Tim ter Laak.

---
flashrom output:

flashrom v0.9.2-r1153 on Linux 2.6.25-2-686 (i686), built with libpci 3.0.0, GCC 4.3.1, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 4 usecs, 200M loops per second, 10 myus = 13 us, 100 myus = 103 us, 1000 myus = 1002 us, 10000 myus = 10071 us, 16 myus = 20 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: " http://www.abit.com.tw"
DMI string baseboard-product-name: "i440BX-W977 (BM6)"
DMI string baseboard-version: " "
DMI string chassis-type: "Unknown"
Found chipset "Intel PIIX4/4E/4M", enabling flash write... chipset PCI ID is 8086:7110, OK.
This chipset supports the following protocols: Parallel.
Probing for AMD Am29F010A/B, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A25L05PT, 64 KB: skipped.
Probing for AMIC A25L05PU, 64 KB: skipped.
Probing for AMIC A25L10PT, 128 KB: skipped.
Probing for AMIC A25L10PU, 128 KB: skipped.
Probing for AMIC A25L20PT, 256 KB: skipped.
Probing for AMIC A25L20PU, 256 KB: skipped.
Probing for AMIC A25L40PT, 512 KB: skipped.
Probing for AMIC A25L40PU, 512 KB: skipped.
Probing for AMIC A25L80P, 1024 KB: skipped.
Probing for AMIC A25L16PT, 2048 KB: skipped.
Probing for AMIC A25L16PU, 2048 KB: skipped.
Probing for AMIC A25L512, 64 KB: skipped.
Probing for AMIC A25L010, 128 KB: skipped.
Probing for AMIC A25L020, 256 KB: skipped.
Probing for AMIC A25L040, 512 KB: skipped.
Probing for AMIC A25L080, 1024 KB: skipped.
Probing for AMIC A25L016, 2048 KB: skipped.
Probing for AMIC A25L032, 4096 KB: skipped.
Probing for AMIC A25LQ032, 4096 KB: skipped.
Probing for AMIC A29002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT25DF021, 256 KB: skipped.
Probing for Atmel AT25DF041A, 512 KB: skipped.
Probing for Atmel AT25DF081, 1024 KB: skipped.
Probing for Atmel AT25DF081A, 1024 KB: skipped.
Probing for Atmel AT25DF161, 2048 KB: skipped.
Probing for Atmel AT25DF321, 4096 KB: skipped.
Probing for Atmel AT25DF321A, 4096 KB: skipped.
Probing for Atmel AT25DF641, 8192 KB: skipped.
Probing for Atmel AT25DQ161, 2048 KB: skipped.
Probing for Atmel AT25F512B, 64 KB: skipped.
Probing for Atmel AT25FS010, 128 KB: skipped.
Probing for Atmel AT25FS040, 512 KB: skipped.
Probing for Atmel AT26DF041, 512 KB: skipped.
Probing for Atmel AT26DF081A, 1024 KB: skipped.
Probing for Atmel AT26DF161, 2048 KB: skipped.
Probing for Atmel AT26DF161A, 2048 KB: skipped.
Probing for Atmel AT26F004, 512 KB: skipped.
Probing for Atmel AT29C512, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C010A, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C020, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C040A, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT45CS1282, 16896 KB: skipped.
Probing for Atmel AT45DB011D, 128 KB: skipped.
Probing for Atmel AT45DB021D, 256 KB: skipped.
Probing for Atmel AT45DB041D, 512 KB: skipped.
Probing for Atmel AT45DB081D, 1024 KB: skipped.
Probing for Atmel AT45DB161D, 2048 KB: skipped.
Probing for Atmel AT45DB321C, 4224 KB: skipped.
Probing for Atmel AT45DB321D, 4096 KB: skipped.
Probing for Atmel AT45DB642D, 8192 KB: skipped.
Probing for Atmel AT49BV512, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F020, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N), 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for EMST F25L008A, 1024 KB: skipped.
Probing for Eon EN25B05, 64 KB: skipped.
Probing for Eon EN25B05T, 64 KB: skipped.
Probing for Eon EN25B10, 128 KB: skipped.
Probing for Eon EN25B10T, 128 KB: skipped.
Probing for Eon EN25B20, 256 KB: skipped.
Probing for Eon EN25B20T, 256 KB: skipped.
Probing for Eon EN25B40, 512 KB: skipped.
Probing for Eon EN25B40T, 512 KB: skipped.
Probing for Eon EN25B80, 1024 KB: skipped.
Probing for Eon EN25B80T, 1024 KB: skipped.
Probing for Eon EN25B16, 2048 KB: skipped.
Probing for Eon EN25B16T, 2048 KB: skipped.
Probing for Eon EN25B32, 4096 KB: skipped.
Probing for Eon EN25B32T, 4096 KB: skipped.
Probing for Eon EN25B64, 8192 KB: skipped.
Probing for Eon EN25B64T, 8192 KB: skipped.
Probing for Eon EN25D16, 2048 KB: skipped.
Probing for Eon EN25F05, 64 KB: skipped.
Probing for Eon EN25F10, 128 KB: skipped.
Probing for Eon EN25F20, 256 KB: skipped.
Probing for Eon EN25F40, 512 KB: skipped.
Probing for Eon EN25F80, 1024 KB: skipped.
Probing for Eon EN25F16, 2048 KB: skipped.
Probing for Eon EN25F32, 4096 KB: skipped.
Probing for Eon EN29F010, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004BC, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F004TC, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d
Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d
Probing for Hyundai HY29F002T, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Hyundai HY29F002B, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BX-B, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F001BX-T, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F002BC-T, 256 KB: probe_82802ab: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004S5, 512 KB: probe_82802ab: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-B, 512 KB: probe_82802ab: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F004BV/BE-T, 512 KB: probe_82802ab: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-B, 512 KB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content
Probing for Intel 28F400BV/CV/CE-T, 512 KB: probe_82802ab: id1 0x25, id2 0x2d, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 KB: skipped.
Probing for Intel 82802AC, 1024 KB: skipped.
Probing for Macronix MX25L512, 64 KB: skipped.
Probing for Macronix MX25L1005, 128 KB: skipped.
Probing for Macronix MX25L2005, 256 KB: skipped.
Probing for Macronix MX25L4005, 512 KB: skipped.
Probing for Macronix MX25L8005, 1024 KB: skipped.
Probing for Macronix MX25L1605, 2048 KB: skipped.
Probing for Macronix MX25L1635D, 2048 KB: skipped.
Probing for Macronix MX25L3205, 4096 KB: skipped.
Probing for Macronix MX25L3235D, 4096 KB: skipped.
Probing for Macronix MX25L6405, 8192 KB: skipped.
Probing for Macronix MX25L12805, 16384 KB: skipped.
Probing for Macronix MX29F001B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Macronix MX29LV040, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000B, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51000T, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51400B, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29C51400T, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29LC51000, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29LC51001, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for MoselVitelic V29LC51002, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Numonyx M25PE10, 128 KB: skipped.
Probing for Numonyx M25PE20, 256 KB: skipped.
Probing for Numonyx M25PE40, 512 KB: skipped.
Probing for Numonyx M25PE80, 1024 KB: skipped.
Probing for Numonyx M25PE16, 2048 KB: skipped.
Probing for PMC Pm25LV010, 128 KB: skipped.
Probing for PMC Pm25LV016B, 2048 KB: skipped.
Probing for PMC Pm25LV020, 256 KB: skipped.
Probing for PMC Pm25LV040, 512 KB: skipped.
Probing for PMC Pm25LV080B, 1024 KB: skipped.
Probing for PMC Pm25LV512, 64 KB: skipped.
Probing for PMC Pm29F002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV010, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV020, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm39LV040, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 KB: skipped.
Probing for PMC Pm49FL004, 512 KB: skipped.
Probing for Sanyo LF25FW203A, 2048 KB: skipped.
Probing for Sharp LHF00L04, 1024 KB: skipped.
Probing for Spansion S25FL008A, 1024 KB: skipped.
Probing for Spansion S25FL016A, 2048 KB: skipped.
Probing for SST SST25VF016B, 2048 KB: skipped.
Probing for SST SST25VF032B, 4096 KB: skipped.
Probing for SST SST25VF064C, 8192 KB: skipped.
Probing for SST SST25VF040.REMS, 512 KB: skipped.
Probing for SST SST25VF040B, 512 KB: skipped.
Probing for SST SST25LF040A.RES, 512 KB: skipped.
Probing for SST SST25VF040B.REMS, 512 KB: skipped.
Probing for SST SST25VF080B, 1024 KB: skipped.
Probing for SST SST28SF040A, 512 KB: probe_82802ab: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE010, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE010, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29EE020A, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST29LE020, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF512, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF010A, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF020A, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39SF040, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF512, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF010, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF020, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF040, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST39VF080, 1024 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 KB: skipped.
Probing for SST SST49LF003A/B, 384 KB: skipped.
Probing for SST SST49LF004A/B, 512 KB: skipped.
Probing for SST SST49LF004C, 512 KB: skipped.
Probing for SST SST49LF008A, 1024 KB: skipped.
Probing for SST SST49LF008C, 1024 KB: skipped.
Probing for SST SST49LF016C, 2048 KB: skipped.
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: skipped.
Probing for ST M25P05.RES, 64 KB: skipped.
Probing for ST M25P10-A, 128 KB: skipped.
Probing for ST M25P10.RES, 128 KB: skipped.
Probing for ST M25P20, 256 KB: skipped.
Probing for ST M25P40, 512 KB: skipped.
Probing for ST M25P40-old, 512 KB: skipped.
Probing for ST M25P80, 1024 KB: skipped.
Probing for ST M25P16, 2048 KB: skipped.
Probing for ST M25P32, 4096 KB: skipped.
Probing for ST M25P64, 8192 KB: skipped.
Probing for ST M25P128, 16384 KB: skipped.
Probing for ST M29F002B, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F002T/NT, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for ST M29F400BB, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d
Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d
Probing for ST M29W010B, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W040B, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for ST M29W512B, 64 KB: probe_jedec_common: id1 0x41, id2 0xa4, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 KB: skipped.
Probing for ST M50FLW040B, 512 KB: skipped.
Probing for ST M50FLW080A, 1024 KB: skipped.
Probing for ST M50FLW080B, 1024 KB: skipped.
Probing for ST M50FW002, 256 KB: skipped.
Probing for ST M50FW016, 2048 KB: skipped.
Probing for ST M50FW040, 512 KB: skipped.
Probing for ST M50FW080, 1024 KB: skipped.
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RB, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for TI TMS29F002RT, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W25Q80, 1024 KB: skipped.
Probing for Winbond W25Q16, 2048 KB: skipped.
Probing for Winbond W25Q32, 4096 KB: skipped.
Probing for Winbond W25Q64, 8192 KB: skipped.
Probing for Winbond W25x10, 128 KB: skipped.
Probing for Winbond W25x20, 256 KB: skipped.
Probing for Winbond W25x40, 512 KB: skipped.
Probing for Winbond W25x80, 1024 KB: skipped.
Probing for Winbond W25x16, 2048 KB: skipped.
Probing for Winbond W25x32, 4096 KB: skipped.
Probing for Winbond W25x64, 8192 KB: skipped.
Probing for Winbond W29C011, 128 KB: probe_jedec_common: id1 0x25, id2 0xb1, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C020C, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29C040P, 512 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040B, 512 KB: skipped.
Probing for Winbond W39V040C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: skipped.
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F020, 256 KB: probe_jedec_common: id1 0x25, id2 0x4c, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: skipped.
Probing for Winbond W39V080FA, 1024 KB: skipped.
Probing for Winbond W39V080FA (dual mode), 512 KB: skipped.
Probing for AMIC unknown AMIC SPI chip, 0 KB: skipped.
Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped.
Probing for Eon unknown Eon SPI chip, 0 KB: skipped.
Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped.
Probing for PMC unknown PMC SPI chip, 0 KB: skipped.
Probing for SST unknown SST SPI chip, 0 KB: skipped.
Probing for ST unknown ST SPI chip, 0 KB: skipped.
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: skipped.
Probing for Generic unknown SPI chip (RDID), 0 KB: skipped.
Probing for Generic unknown SPI chip (REMS), 0 KB: skipped.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.

---
superiotool output:

superiotool r5728
Probing for ALi Super I/O at 0x3f0...
   Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
   Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
   Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
   Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x2e...
   Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
   Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x25e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x25e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x25e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x25e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x25e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x2e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x2e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x4e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
   Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
   Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
   Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
   Failed. Returned data: port=0xff, port+1=0xff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
   Failed. Returned data: sid=0xff, id=0x00, rev=0x00
Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e...
   Failed. Returned data: sid=0xff, id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
   Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
   Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Found Winbond W83977EF/EG (id=0x52, rev=0xf1) at 0x3f0
Register dump:
idx 02 20 21 22 23 24 25 26  28 2a 2b 2c 2d 2e 2f
val ff 52 f1 ff fe 84 00 00  00 00 00 00 00 00 ff
def RR 52 MM ff fe MM 00 MM  00 00 00 00 RR RR RR
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2  f4 f5
val 01 03 f0 06 02 0c 00 ff  00 00
def 01 03 f0 06 02 0e 00 ff  00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 01 03 78 07 03 07
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 00 00 00 00 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 00 00 00 00 00 00
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 42
def 01 00 60 00 64 01 0c 83
LDN 0x07 (GPIO 1)
idx 30 60 61 62 63 64 65 70  72 e0 e1 e2 e3 e4 e5 e6  e7 f1
val 00 00 00 00 00 00 00 00  00 01 01 01 01 01 01 01  01 00
def 00 00 00 00 00 00 00 00  00 01 01 01 01 01 01 01  01 00
LDN 0x08 (GPIO 2)
idx 30 60 61 70 72 e8 e9 ea  eb ec ed f0 f1 f2 f3 f4
val 00 00 00 00 00 01 01 01  01 01 01 00 ff 00 00 00
def 00 00 00 00 00 01 01 01  01 01 01 00 RR 00 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5  e6 e7 f0 f1 f3 f4 f6 f7  f9 fe ff
val 00 00 00 ed ff 00 00 00  00 00 00 8f 3c 00 00 00  00 00 00
def 00 00 00 00 MM MM MM 00  00 00 00 00 00 00 00 00  00 RR RR
Hardware monitor (0x0004)
Probing for Winbond Super I/O (init=0x88) at 0x370...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
   PCI device 1106:0686 not found.

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Tim ter Laak]

This patch adds support for the Abit BM6 board, using DMI string 
identification.

Signed-off-by: Tim ter Laak 
---

On Sun, 5 Sep 2010, Tim ter Laak wrote:
> On Sat, 4 Sep 2010, Carl-Daniel Hailfinger wrote:
> > flashrom supports DMI matching since a few months, so it may be possible
> > to identify your board that way. And with superiotool output, we could
> > perhaps improve matching a bit more.
> > If DMI is useful on your board, we could try to match the DMI strings
> > and avoid the -m abit:ab-bm6 parameter for flashrom.
>
> The combination of the 'baseboard-manufacturer' and 'baseboard-product-name' 
> DMI strings looks promising.
> (The empty contents of other strings is completely in line with expectations; 
> after all the BIOS didn't bother to assign subsystem IDs to the PCI devices 
> of the chipset either.)
>
> I'll be poking around in the source in the next few days to port my patch to 
> the current version of flashrom. It would take a while to get up to speed 
> again though, so I'm also open to testing other people's patches.

Well, that was a lot easier than expected. As per commit log message at 
the top of this mail, the patch is attached. Patch is tested and seems to 
work fine.

Tim.

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Michael Karcher]

Am Montag, den 06.09.2010, 19:47 +0200 schrieb Tim ter Laak:
> Signed-off-by: Tim ter Laak 
> Well, that was a lot easier than expected. As per commit log message at 
> the top of this mail, the patch is attached. Patch is tested and seems to 
> work fine.

Please also add the board to print.c, leave the URL NULL if you can't
find any. Otherwise it will be missing from flashrom -L and the Wiki.

Regards,
  Michael Karcher

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Tim ter Laak]

This patch adds support for the Abit BM6 board, using DMI string
identification, and lists it in print.c .

Signed-off-by: Tim ter Laak 
---

On Mon, 6 Sep 2010, Michael Karcher wrote:
> Please also add the board to print.c, leave the URL NULL if you can't
> find any. Otherwise it will be missing from flashrom -L and the Wiki.

I've attached an updated patch that adds this.

Tim.

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Michael Karcher]

Am Dienstag, den 07.09.2010, 09:06 +0200 schrieb Tim ter Laak:
> This patch adds support for the Abit BM6 board, using DMI string
> identification, and lists it in print.c .
>
> Signed-off-by: Tim ter Laak

Acked-by: Michael Karcher

If no one else beats me to it, I will commit tonight.

Regards,
  Michael Karcher

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Uwe Hermann]

On Tue, Sep 07, 2010 at 09:18:52AM +0200, Michael Karcher wrote:
> Am Dienstag, den 07.09.2010, 09:06 +0200 schrieb Tim ter Laak:
> > This patch adds support for the Abit BM6 board, using DMI string
> > identification, and lists it in print.c .
> >
> > Signed-off-by: Tim ter Laak
>
> Acked-by: Michael Karcher
>
> If no one else beats me to it, I will commit tonight.

Looks good to me too, but two small requests:
> Index: board_enable.c
>
> --- board_enable.c      (revision 1153)
> +++ board_enable.c      (working copy)
> @@ -1093,6 +1093,15 @@
>
> /*
> Suited for:
> Abit AB-BM6

s/Abit/abit/ for consistency (though we may change the convention later).

And: "AB-BM6" should be just "BM6" as that's the name on the website.
Where does the "AB-" prefix come from? Does it say so on the PCB or
something?

Either way:

Acked-by: Uwe Hermann

Uwe.

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Tim ter Laak]

This patch adds support for the Abit BM6 board, using DMI string
identification, and lists it in print.c [v3].

Signed-off-by: Tim ter Laak 
---

On Tue, 7 Sep 2010, Uwe Hermann wrote:
> Looks good to me too, but two small requests:
> > Abit AB-BM6
>
> s/Abit/abit/ for consistency (though we may change the convention later).
>
> And: "AB-BM6" should be just "BM6" as that's the name on the website.
> Where does the "AB-" prefix come from? Does it say so on the PCB or
> something?

Fair enough. It's worth it to keep an eye on grep-ability ;)

And yeah, the AB-BM6 is the marking on the board itself. On closer 
inspection, the AB part must be there just to express the Abit brand, as I 
cannot find their name printed anywhere on the board.

Updated patch is attached.

Tim.
> Either way:
>
> Acked-by: Uwe Hermann

[coreboot] flashrom patch: add support for Abit AB-BM6 board

[Uwe Hermann]

On Tue, Sep 07, 2010 at 09:10:35PM +0200, Tim ter Laak wrote:
> This patch adds support for the Abit BM6 board, using DMI string
> identification, and lists it in print.c [v3].
>
> Signed-off-by: Tim ter Laak

Thanks a lot, committed as r1163.

Uwe.