I made a Patch for adding "MX25U8032E" Chip. Hope the Patch is ok, i took the data from "MX25U1635E" and changed it to fit the "MX25U8032E".
Tested (with arduino-serprog): - Probing - Reading (i readed the chip 3 times and make a diff, all diffs are same) - Erasing - Writing data1 - Writing data2 (overwriting)
Important: The Vcc must be at max 2V, it does NOT work if Vcc is at 3.3V! This ends in read and write errors (data corruption)! Tested ;-)