Support for HP Compaq 6820s laptop

[Jean Dupont]

Hello,

I just tried flashrom with my laptop:
model: HP Compaq 6820s
s/n: CNU74829VJ
p/n: GR713ET#ABF
service tag: C6820sST7250F7x16GIBN20Ca FR
no idea how to find the revision number,
but here some numbers lying around: HPK-HSTNN-I40C(B)

here a link to some bios versions:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lan...

my current experience when flashing a new rom file is that flashrom
tries to erase before writing, cannot erase the block beginning at
F0000 because it's write-protected and exits.  carldani on irc just
helped me to recover.

I suppose that there is some region, say F0000-FFEFF which is
write-protected. it would be great if we could specify to flashrom to
skip it and flash 00000-EFFFF and FFF00-FFFFF only. There is only
zeros when you read the write-protected region anyway.

Thank you very much. This is a great project :)
Julius.

P.S.: here some debug info:

output of flashrom -V:
root@ubuntu:~/Dokumente/vrac# flashrom -V
flashrom v0.9.1-r946
No coreboot table found.
DMI string system-manufacturer: "Hewlett-Packard"
DMI string system-product-name: "HP Compaq 6820s"
DMI string system-version: "F.0B"
DMI string baseboard-manufacturer: "Hewlett-Packard"
DMI string baseboard-product-name: "30D7"
DMI string baseboard-version: "KBC Version 83.13"
DMI string chassis-type: "Notebook"
Laptop detected via DMI
========================================================================
WARNING! You seem to be running flashrom on a laptop.
Laptops, notebooks and netbooks are difficult to support and we recommend
to use the vendor flashing utility. The embedded controller (EC) in these
machines often interacts badly with flashing.
See http://www.flashrom.org/Laptops for details.
========================================================================
Found chipset "Intel ICH8M", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1

Root Complex Register Block address = 0xfed90000
GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed90000 + 0x3020
0x04: 0xe008 (HSFS)
FLOCKDN 1, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x0000ffff (FRAP)
BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
0x54: 0x00000000 (FREG0)
0x58: 0x00ff0003 (FREG1)
0x5C: 0x00000fff (FREG2)
0x60: 0x00020001 (FREG3)
0x64: 0x00000000 (FREG4)
0x74: 0x80ff00f0 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00420004 (SSFS, SSFC)
0x94: 0x5006     (PREOP)
0x96: 0x7f48     (OPTYPE)
0x98: 0x0405039f (OPMENU)
0x9C: 0x0102d820 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
WARNING: SPI Configuration Lockdown activated.
Generating OPCODES... done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... 609M loops per second, 100 myus = 196 us. OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type LPC are incompatible.
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type
FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type
FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type
FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type
FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type
FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type
FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x02, id2 0x37
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address 0xfff00000.
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20
0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20
0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20
0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x02, id2
0x37, id1 is normal flash content, id2 is normal flash content
Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90
Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90
Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x02,
id2 0x37, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x02, id2 0x37
Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type LPC are incompatible.
Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type LPC are incompatible.
Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x14.
Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x14.
Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x14.
Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x02, id2 0x37
Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x02, id2 0x37
Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than
supported size 1024 kB of chipset/board/programmer for FWH interface,
probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x02, id2 0x37
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and
chip bus type LPC are incompatible.
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and
chip bus type Parallel are incompatible.
Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x14.
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x02,
id2 0x37, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI
and chip bus type LPC are incompatible.
Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
timing information, using default 10mS/40uS. probe_jedec_common: id1
0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
probe timing information, using default 10mS/40uS. probe_jedec_common:
id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash
content
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash
chip, zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip,
zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping
flash chip, zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip,
zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip,
zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero
size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash
chip, zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash
chip, zero size at 0x00000000.
RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Not unmapping zero size at (nil)
Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash
chip, zero size at 0x00000000.
Invalid OPCODE 0x90
Not unmapping zero size at (nil)
===
This flash part has status UNTESTED for operations: ERASE
Please email a report to [e-mail] if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested.
Thanks for your help!
===
No operations were specified.

output of  lspci -nnvvvxxx:
root@ubuntu:~/Dokumente/vrac# lspci -nnvvvxxx
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
Memory Controller Hub [8086:2a00] (rev 0c)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-agp
00: 86 80 00 2a 06 00 90 20 0c 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
40: 01 90 d9 fe 00 00 00 00 01 40 d9 fe 00 00 00 00
50: 00 00 02 00 13 03 00 00 00 00 00 00 00 00 00 00
60: 05 00 00 f8 00 00 00 00 01 80 d9 fe 00 00 00 00
70: 00 00 00 00 00 00 00 00 01 10 00 00 00 00 00 00
80: 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 11 11 00 00 13 11 00 ff 03 00 00 00 1a b8 00
a0: 10 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
e0: 09 00 0a 91 a2 7c 00 30 04 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 90 0f 04 00 10 00 00 00

00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960
PCI Express Root Port [8086:2a01] (rev 0c)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: dc400000-dc4fffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4159
        Capabilities: [a0] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<64ns, L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s
L1, Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [140] Root Complex Link <?>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00: 86 80 01 2a 07 04 10 00 0c 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 40 40 00 20
20: 40 dc 40 dc 01 d0 f1 d7 00 00 00 00 00 00 00 00
30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 1c 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 03 c8 00 00 00 00 0d 80 00 00 3c 10 d7 30
90: 05 a0 01 00 0c 30 e0 fe 59 41 00 00 00 00 00 00
a0: 10 00 41 00 00 80 00 00 00 00 01 00 01 2d 01 02
b0: 43 00 01 11 c0 25 0c 00 c0 01 48 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 20 00 01 84 0c 00 00 a0 90 0f 04 00 31 00 00 00

00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100
Network Connection [8086:10c4] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at dc500000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at dc520000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 5000 [size=32]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
                Address: 00000000fee0200c  Data: 41c1
        Kernel driver in use: e1000e
        Kernel modules: e1000e
00: 86 80 c4 10 07 04 10 00 03 00 00 02 00 00 00 00
10: 00 00 50 dc 00 00 52 dc 01 50 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 c8 00 00 00 00 00 00 00 05 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 04
d0: 05 00 81 00 0c 20 e0 fe 00 00 00 00 c1 41 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #4 [8086:2834] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 5020 [size=32]
        Kernel driver in use: uhci_hcd
00: 86 80 34 28 05 00 80 02 03 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #5 [8086:2835] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 5040 [size=32]
        Kernel driver in use: uhci_hcd
00: 86 80 35 28 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at dc521000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
00: 86 80 3a 28 06 00 90 02 03 20 03 0c 00 00 00 00
10: 00 10 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
60: 20 20 e1 01 00 00 00 00 01 00 00 00 00 00 08 c0
70: 00 00 c7 03 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 88 85 40 00 86 0f 05 00 0a 17 02 20

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
Audio Controller [8086:284b] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at dc524000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM
unknown, Latency L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train-
SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel
00: 86 80 4b 28 06 00 10 00 03 00 03 04 10 00 00 00
10: 04 40 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
40: 01 00 00 03 00 00 00 00 00 00 00 00 00 80 00 00
50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 91 00 c0 0f 00 00 00 08 10 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 1 [8086:283f] (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4161
        Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00: 86 80 3f 28 07 04 10 00 03 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 20
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
40: 10 80 41 00 c0 8f 00 00 00 00 10 00 11 4c 11 01
50: 00 00 01 10 60 05 10 00 00 00 40 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c 30 e0 fe 61 41 00 00 00 00 00 00
90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
e0: 00 0f c7 00 06 07 08 00 31 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 2 [8086:2841] (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
        I/O behind bridge: 00006000-00006fff
        Memory behind bridge: dc000000-dc0fffff
        Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
HotPlug+ Surpise+
                        Slot #  2, PowerLimit 0.160000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown,
Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4169
        Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00: 86 80 41 28 07 04 10 00 03 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 10 10 00 60 60 00 00
20: 00 dc 00 dc 01 80 11 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00
40: 10 80 41 01 c0 8f 00 00 00 00 10 00 11 2c 11 02
50: 40 00 11 30 60 08 11 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00
90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 88 00 00 00 00
e0: 00 0f c7 84 06 07 08 00 31 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 5 [8086:2847] (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
        I/O behind bridge: 00002000-00003fff
        Memory behind bridge: d8000000-dbffffff
        Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
HotPlug+ Surpise+
                        Slot #  5, PowerLimit 0.160000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+
CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown,
Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet- Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4171
        Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport
        Kernel modules: shpchp
00: 86 80 47 28 07 04 10 00 03 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 28 28 00 20 30 00 00
20: 00 d8 f0 db 21 80 31 80 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
40: 10 80 41 01 c0 8f 00 00 00 00 10 00 11 4c 11 05
50: 00 00 01 10 60 08 29 00 09 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00
90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 c8 00 00 00 00
e0: 00 0f c7 00 06 07 08 00 31 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #1 [8086:2830] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 5060 [size=32]
        Kernel driver in use: uhci_hcd
00: 86 80 30 28 05 00 80 02 03 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #2 [8086:2831] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 5080 [size=32]
        Kernel driver in use: uhci_hcd
00: 86 80 31 28 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #3 [8086:2832] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 50a0 [size=32]
        Kernel driver in use: uhci_hcd
00: 86 80 32 28 05 00 80 02 03 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at dc528000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
00: 86 80 36 28 06 00 90 02 03 20 03 0c 00 00 00 00
10: 00 80 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
60: 20 20 9f 01 00 00 00 00 01 00 00 00 00 00 08 c0
70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 88 85 40 00 86 0f 05 00 0a 17 02 20

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:30d7]
00: 86 80 48 24 07 01 10 00 f3 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00
50: 0d 00 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC
Interface Controller [8086:2815] (rev 03)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: iTCO_wdt
00: 86 80 15 28 07 00 10 02 03 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
40: 01 10 00 00 80 00 00 00 01 11 00 00 10 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 80 80 80 80 92 00 00 00 80 80 80 80 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 00 3c 01 05 7c 00 00 00 00 00 00 00 00 00
90: e9 02 04 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 24 0e 00 00 e1 00 03 00 01 1c 0b 00 00 03 00 00
b0: 00 00 f0 00 00 00 00 00 04 a0 62 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 33 22 11 00 67 45 00 00 00 c0 00 00 01 00 00 00
e0: 09 00 0c 10 20 02 4c c3 60 00 00 00 00 00 00 00
f0: 01 00 d9 fe 0c 69 22 00 86 0f 05 00 00 00 00 00

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a
[Master SecP PriP])
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 50c0 [size=16]
        Kernel driver in use: ata_piix
00: 86 80 50 28 05 00 80 02 03 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: c1 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
40: 03 e3 00 40 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0
        Interrupt: pin B routed to IRQ 30
        Region 0: I/O ports at 13f0 [size=8]
        Region 1: I/O ports at 15f4 [size=4]
        Region 2: I/O ports at 1370 [size=8]
        Region 3: I/O ports at 1574 [size=4]
        Region 4: I/O ports at 5100 [size=32]
        Region 5: Memory at dc529000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/2 Enable+
                Address: fee0100c  Data: 41a9
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA <?>
        Kernel driver in use: ahci
        Kernel modules: ahci
00: 86 80 29 28 07 04 b0 02 03 01 06 01 00 00 00 00
10: f1 13 00 00 f5 15 00 00 71 13 00 00 75 15 00 00
20: 01 51 00 00 00 90 52 dc 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
40: 07 a3 00 80 00 00 00 00 01 00 01 00 00 00 00 00
50: 00 00 00 00 11 10 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 70 05 00 0c 10 e0 fe a9 41 00 00 00 00 00 00
90: 40 00 03 01 80 01 00 7e 00 00 00 00 0c 00 00 00
a0: 00 00 00 00 00 00 00 00 12 00 10 00 48 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV516
[Mobility Radeon X1350] [1002:7196]
        Subsystem: Hewlett-Packard Company Device [103c:30d7]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 4000 [size=256]
        Region 2: Memory at dc400000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at dc420000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<4us, L1 unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
L1, Latency L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
                Address: 00000000fee0200c  Data: 41a1
        Kernel driver in use: radeon
        Kernel modules: radeon
00: 02 10 96 71 07 04 10 00 00 00 00 03 10 00 00 00
10: 08 00 00 d0 01 40 00 00 00 00 40 dc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
50: 01 58 02 06 00 00 00 00 10 80 11 00 a0 0f 2c 01
60: 10 08 00 00 01 0d 00 00 43 00 01 11 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 00 81 00 0c 20 e0 fe 00 00 00 00 a1 41 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
3945ABG [Golan] Network Connection [8086:4222] (rev 02)
        Subsystem: Hewlett-Packard Company Device [103c:135c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 31
        Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
                Address: 00000000fee0300c  Data: 41b1
        Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
<512ns, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <128ns, L1 <64us
                        ClockPM+ Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [140] Device Serial Number 5a-e1-58-ff-ff-bf-1c-00
        Kernel driver in use: iwl3945
        Kernel modules: iwl3945
00: 86 80 22 42 06 04 10 00 02 00 80 02 10 00 00 00
10: 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 5c 13
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 00 00 0d
d0: 05 e0 81 00 0c 30 e0 fe 00 00 00 00 b1 41 00 00
e0: 10 00 11 00 c0 0e 00 00 10 08 10 00 11 1c 07 00
f0: 40 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00

output of superiotool -deV:
root@ubuntu:~/Dokumente/vrac# superiotool -deV
superiotool r3844
Probing for ALi Super I/O at 0x3f0...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
  Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
  Failed. Returned data: vid=0x8400, id=0x0036
Probing for Fintek Super I/O at 0x4e...
  Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x2e...
  Failed. Returned data: id=0x3600, rev=0x0
Probing for ITE Super I/O (init=it8761e) at 0x2e...
  Failed. Returned data: id=0x3600, rev=0x0
Probing for ITE Super I/O (init=it8228e) at 0x2e...
  Failed. Returned data: id=0x3600, rev=0x0
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id=0x3600, rev=0x0
Probing for ITE Super I/O (init=standard) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
  Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
  Failed. Returned data: port=0xff, port+1=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
  Failed. Returned data: id=0x36, rev=0x00
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
  Failed. Returned data: id=0x00, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
  Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
  Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
No Super I/O found

Hello,

Just messed up a little bit with the code. Seems that the whole region f0000-
fffff is write-protected. No idea what is actually stored in it and why it is 
write-protected apart it being rewritten by the HP flash utility when upgrading 
(but not when downgrading). So didn't find out anything, sad :|

Best regards,
Julius

-- Ursprüngliche Nachricht:
Betreff: Support for HP Compaq 6820s laptop
Datum: Freitag, 9. Juli 2010, 13:59:28
Von: Jean Dupont 
An:  [e-mail]
> Hello,
>
> I just tried flashrom with my laptop:
> model: HP Compaq 6820s
> s/n: CNU74829VJ
> p/n: GR713ET#ABF
> service tag: C6820sST7250F7x16GIBN20Ca FR
> no idea how to find the revision number,
> but here some numbers lying around: HPK-HSTNN-I40C(B)
>
> here a link to some bios versions:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lan...
> my current experience when flashing a new rom file is that flashrom
> tries to erase before writing, cannot erase the block beginning at
> F0000 because it's write-protected and exits.  carldani on irc just
> helped me to recover.
>
> I suppose that there is some region, say F0000-FFEFF which is
> write-protected. it would be great if we could specify to flashrom to
> skip it and flash 00000-EFFFF and FFF00-FFFFF only. There is only
> zeros when you read the write-protected region anyway.
>
> Thank you very much. This is a great project :)
> Julius.
>
> P.S.: here some debug info:
>
> output of flashrom -V:
> root@ubuntu:~/Dokumente/vrac# flashrom -V
> flashrom v0.9.1-r946
> No coreboot table found.
> DMI string system-manufacturer: "Hewlett-Packard"
> DMI string system-product-name: "HP Compaq 6820s"
> DMI string system-version: "F.0B"
> DMI string baseboard-manufacturer: "Hewlett-Packard"
> DMI string baseboard-product-name: "30D7"
> DMI string baseboard-version: "KBC Version 83.13"
> DMI string chassis-type: "Notebook"
> Laptop detected via DMI
> ========================================================================
> WARNING! You seem to be running flashrom on a laptop.
> Laptops, notebooks and netbooks are difficult to support and we recommend
> to use the vendor flashing utility. The embedded controller (EC) in these
> machines often interacts badly with flashing.
> See http://www.flashrom.org/Laptops for details.
> ========================================================================
> Found chipset "Intel ICH8M", enabling flash write...
> 0xfff80000/0xffb80000 FWH IDSEL: 0x0
> 0xfff00000/0xffb00000 FWH IDSEL: 0x0
> 0xffe80000/0xffa80000 FWH IDSEL: 0x1
> 0xffe00000/0xffa00000 FWH IDSEL: 0x1
> 0xffd80000/0xff980000 FWH IDSEL: 0x2
> 0xffd00000/0xff900000 FWH IDSEL: 0x2
> 0xffc80000/0xff880000 FWH IDSEL: 0x3
> 0xffc00000/0xff800000 FWH IDSEL: 0x3
> 0xff700000/0xff300000 FWH IDSEL: 0x4
> 0xff600000/0xff200000 FWH IDSEL: 0x5
> 0xff500000/0xff100000 FWH IDSEL: 0x6
> 0xff400000/0xff000000 FWH IDSEL: 0x7
> 0xfff80000/0xffb80000 FWH decode enabled
> 0xfff00000/0xffb00000 FWH decode enabled
> 0xffe80000/0xffa80000 FWH decode disabled
> 0xffe00000/0xffa00000 FWH decode disabled
> 0xffd80000/0xff980000 FWH decode disabled
> 0xffd00000/0xff900000 FWH decode disabled
> 0xffc80000/0xff880000 FWH decode disabled
> 0xffc00000/0xff800000 FWH decode disabled
> 0xff700000/0xff300000 FWH decode disabled
> 0xff600000/0xff200000 FWH decode disabled
> 0xff500000/0xff100000 FWH decode disabled
> 0xff400000/0xff000000 FWH decode disabled
> Maximum FWH chip size: 0x100000 bytes
> BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
>
> Root Complex Register Block address = 0xfed90000
> GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI)
> Top Swap : not enabled
> SPIBAR = 0xfed90000 + 0x3020
> 0x04: 0xe008 (HSFS)
> FLOCKDN 1, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
> 0x50: 0x0000ffff (FRAP)
> BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
> 0x54: 0x00000000 (FREG0)
> 0x58: 0x00ff0003 (FREG1)
> 0x5C: 0x00000fff (FREG2)
> 0x60: 0x00020001 (FREG3)
> 0x64: 0x00000000 (FREG4)
> 0x74: 0x80ff00f0 (PR0)
> 0x78: 0x00000000 (PR1)
> 0x7C: 0x00000000 (PR2)
> 0x80: 0x00000000 (PR3)
> 0x84: 0x00000000 (PR4)
> 0x90: 0x00420004 (SSFS, SSFC)
> 0x94: 0x5006     (PREOP)
> 0x96: 0x7f48     (OPTYPE)
> 0x98: 0x0405039f (OPMENU)
> 0x9C: 0x0102d820 (OPMENU+4)
> 0xA0: 0x00000000 (BBAR)
> 0xB0: 0x00000000 (FDOC)
> WARNING: SPI Configuration Lockdown activated.
> Generating OPCODES... done
> SPI Read Configuration: prefetching disabled, caching enabled, OK.
> This chipset supports the following protocols: FWH,SPI.
> Calibrating delay loop... 609M loops per second, 100 myus = 196 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29F040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for ASD AE49F2008, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT25DF021, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25F512B, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25FS010, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT25FS040, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF041, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT26F004, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT29C512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT29C020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for AMIC A25L40PT, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for AMIC A25L40PU, 512 KB: RDID returned 0xc2 0x20 0x14 0xc2.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for AMIC A29002B, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A29002T, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A29040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for AMIC A49LF040A, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for EMST F49B002UA, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Eon EN25B05, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B05T, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B10T, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B20T, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B40T, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B80T, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B16T, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B32T, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25B64T, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25D16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F05, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN25F32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Eon EN29F010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type
> FWH,SPI and chip bus type Parallel are incompatible.
> Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Intel 28F004S5, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Macronix MX25L512, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L1005, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L2005, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L4005, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Chip status register is 00
> Chip status register: Status Register Write Disable (SRWD) is not set
> Chip status register: Bit 6 is not set
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
> Chip status register: Write Enable Latch (WEL) is not set
> Chip status register: Write In Progress (WIP/BUSY) is not set
> Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address

0xfff00000.
> Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xc2 0x20
> 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xc2 0x20
> 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xc2 0x20
> 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Numonyx M25PE10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV010, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV020, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV040, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm25LV512, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for PMC Pm29F002T, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for PMC Pm29F002B, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal
> flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x02, id2
> 0x37, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for Spansion S25FL008A, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF016B, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF032B, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF040.REMS, 512 KB: Invalid OPCODE 0x90
> Probing for SST SST25VF040B, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST25VF040B.REMS, 512 KB: Invalid OPCODE 0x90
> Probing for SST SST25VF080B, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for SST SST28SF040A, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29EE010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST29LE010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST29EE020A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST29LE020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39SF512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39SF010A, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF020A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST39SF040, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF512, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF010, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF040, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for SST SST39VF080, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x02,
> id2 0x37, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than
> supported size 1024 kB of chipset/board/programmer for FWH interface,
> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
> Probing for SST SST49LF020, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for SST SST49LF020A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for SST SST49LF040, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for SST SST49LF040B, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for SST SST49LF080A, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for SST SST49LF160C, 2048 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for ST M25P05-A, 64 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P05.RES, 64 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P10-A, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P10.RES, 128 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P40-old, 512 KB: RDID returned 0xc2 0x20 0x14.
> Ignoring RES in favour of RDID.
> Probing for ST M25P80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M25P128, 16384 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for ST M29F002B, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29F400BT, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W010B, 128 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W040B, 512 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M29W512B, 64 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than
> supported size 1024 kB of chipset/board/programmer for FWH interface,
> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x02, id2 0x37
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
> Probing for ST M50LPW116, 2048 KB: skipped. Host bus type FWH,SPI and
> chip bus type LPC are incompatible.
> Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type FWH,SPI and
> chip bus type Parallel are incompatible.
> Probing for Winbond W25x10, 128 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x20, 256 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x40, 512 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x80, 1024 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x16, 2048 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x32, 4096 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W25x64, 8192 KB: RDID returned 0xc2 0x20 0x14.
> probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Probing for Winbond W29C011, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29C020C, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29C040P, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W29EE011, 128 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W39V040A, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W39V040B, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W39V040C, 512 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x02,
> id2 0x37, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W49F002U, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type Parallel are incompatible.
> Probing for Winbond W49V002A, 256 KB: skipped. Host bus type FWH,SPI
> and chip bus type LPC are incompatible.
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff,
> id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
> normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe
> timing information, using default 10mS/40uS. probe_jedec_common: id1
> 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2
> is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct
> probe timing information, using default 10mS/40uS. probe_jedec_common:
> id1 0x02, id2 0x37, id1 is normal flash content, id2 is normal flash
> content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping
> flash chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip,
> zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero
> size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Generic unknown SPI chip (RDID), 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> RDID returned 0xc2 0x20 0x14. probe_spi_rdid_generic: id1 0xc2, id2 0x2014
> Not unmapping zero size at (nil)
> Probing for Generic unknown SPI chip (REMS), 0 KB: Not mapping flash
> chip, zero size at 0x00000000.
> Invalid OPCODE 0x90
> Not unmapping zero size at (nil)
> ===
> This flash part has status UNTESTED for operations: ERASE
> Please email a report to [e-mail] if any of the above operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -rV,
> -wV, -EV), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> No operations were specified.
>
> output of  lspci -nnvvvxxx:
> root@ubuntu:~/Dokumente/vrac# lspci -nnvvvxxx
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
> Memory Controller Hub [8086:2a00] (rev 0c)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
>         Latency: 0
>         Capabilities: [e0] Vendor Specific Information <?>
>         Kernel modules: intel-agp
> 00: 86 80 00 2a 06 00 90 20 0c 00 00 06 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 90 d9 fe 00 00 00 00 01 40 d9 fe 00 00 00 00
> 50: 00 00 02 00 13 03 00 00 00 00 00 00 00 00 00 00
> 60: 05 00 00 f8 00 00 00 00 01 80 d9 fe 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 01 10 00 00 00 00 00 00
> 80: 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 10 11 11 00 00 13 11 00 ff 03 00 00 00 1a b8 00
> a0: 10 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00
> e0: 09 00 0a 91 a2 7c 00 30 04 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 90 0f 04 00 10 00 00 00
>
> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960
> PCI Express Root Port [8086:2a01] (rev 0c)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>         I/O behind bridge: 00004000-00004fff
>         Memory behind bridge: dc400000-dc4fffff
>         Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [88] Subsystem: Hewlett-Packard Company Device

[103c:30d7]
>     Capabilities: [80] Power Management version 3
>             Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
>                 Address: fee0300c  Data: 4159
>         Capabilities: [a0] Express (v1) Root Port (Slot-), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <64ns, L1 <1us
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
>                 LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <256ns, L1 <4us
>                         ClockPM- Suprise- LLActRep- BwNot-
>                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> Retrain- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [140] Root Complex Link <?>
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
> 00: 86 80 01 2a 07 04 10 00 0c 00 04 06 10 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 01 01 00 40 40 00 20
> 20: 40 dc 40 dc 01 d0 f1 d7 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 1c 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 01 90 03 c8 00 00 00 00 0d 80 00 00 3c 10 d7 30
> 90: 05 a0 01 00 0c 30 e0 fe 59 41 00 00 00 00 00 00
> a0: 10 00 41 00 00 80 00 00 00 00 01 00 01 2d 01 02
> b0: 43 00 01 11 c0 25 0c 00 c0 01 48 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 20 00 01 84 0c 00 00 a0 90 0f 04 00 31 00 00 00
>
> 00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100
> Network Connection [8086:10c4] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 28
>         Region 0: Memory at dc500000 (32-bit, non-prefetchable) [size=128K]
>         Region 1: Memory at dc520000 (32-bit, non-prefetchable) [size=4K]
>         Region 2: I/O ports at 5000 [size=32]
>         Capabilities: [c8] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable+
>                 Address: 00000000fee0200c  Data: 41c1
>         Kernel driver in use: e1000e
>         Kernel modules: e1000e
> 00: 86 80 c4 10 07 04 10 00 03 00 00 02 00 00 00 00
> 10: 00 00 50 dc 00 00 52 dc 01 50 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 c8 00 00 00 00 00 00 00 05 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 04
> d0: 05 00 81 00 0c 20 e0 fe 00 00 00 00 c1 41 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #4 [8086:2834] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin A routed to IRQ 16
>     Region 4: I/O ports at 5020 [size=32]
>     Kernel driver in use: uhci_hcd
>
> 00: 86 80 34 28 05 00 80 02 03 00 03 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 21 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #5 [8086:2835] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin B routed to IRQ 17
>     Region 4: I/O ports at 5040 [size=32]
>     Kernel driver in use: uhci_hcd
>
> 00: 86 80 35 28 05 00 80 02 03 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 41 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin C routed to IRQ 18
>     Region 0: Memory at dc521000 (32-bit, non-prefetchable) [size=1K]
>     Capabilities: [50] Power Management version 2
>             Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
>
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Debug port: BAR=1 offset=00a0
>         Kernel driver in use: ehci_hcd
> 00: 86 80 3a 28 06 00 90 02 03 20 03 0c 00 00 00 00
> 10: 00 10 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 03 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
> 60: 20 20 e1 01 00 00 00 00 01 00 00 00 00 00 08 c0
> 70: 00 00 c7 03 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 88 85 40 00 86 0f 05 00 0a 17 02 20
>
> 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
> Audio Controller [8086:284b] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at dc524000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [70] Express (v1) Root Complex Integrated Endpoint,

MSI 00
>             DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
>
> unlimited, L1 unlimited
>                         ExtTag- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed unknown, Width x0, ASPM
> unknown, Latency L0 <64ns, L1 <1us
>                         ClockPM- Suprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed unknown, Width x0, TrErr- Train-
> SlotClk- DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [130] Root Complex Link <?>
>         Kernel driver in use: HDA Intel
>         Kernel modules: snd-hda-intel
> 00: 86 80 4b 28 06 00 10 00 03 00 03 04 10 00 00 00
> 10: 04 40 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 01 00 00 03 00 00 00 00 00 00 00 00 00 80 00 00
> 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 10 00 91 00 c0 0f 00 00 00 08 10 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 1 [8086:283f] (rev 03)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: fff00000-000fffff
>         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
>                 LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
>                         ClockPM- Suprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-

CommClk-
>                     ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>             LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
>
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
>                 Address: fee0300c  Data: 4161
>         Capabilities: [90] Subsystem: Hewlett-Packard Company Device

[103c:30d7]
>     Capabilities: [a0] Power Management version 2
>             Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [180] Root Complex Link <?>
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
> 00: 86 80 3f 28 07 04 10 00 03 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 20
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
> 40: 10 80 41 00 c0 8f 00 00 00 00 10 00 11 4c 11 01
> 50: 00 00 01 10 60 05 10 00 00 00 40 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 90 01 00 0c 30 e0 fe 61 41 00 00 00 00 00 00
> 90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
> e0: 00 0f c7 00 06 07 08 00 31 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 2 [8086:2841] (rev 03)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
>         I/O behind bridge: 00006000-00006fff
>         Memory behind bridge: dc000000-dc0fffff
>         Prefetchable memory behind bridge: 0000000080000000-00000000801fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
>                 LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <256ns, L1 <4us
>                         ClockPM- Suprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-

CommClk+
>                     ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>             LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
>
> SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surpise+
>                         Slot #  2, PowerLimit 0.160000; Interlock- NoCompl-
>                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet-
> CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet+ Interlock-
>                         Changed: MRL- PresDet- LinkState+
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
>                 Address: fee0300c  Data: 4169
>         Capabilities: [90] Subsystem: Hewlett-Packard Company Device

[103c:30d7]
>     Capabilities: [a0] Power Management version 2
>             Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [180] Root Complex Link <?>
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
> 00: 86 80 41 28 07 04 10 00 03 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 10 10 00 60 60 00 00
> 20: 00 dc 00 dc 01 80 11 80 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 02 04 00
> 40: 10 80 41 01 c0 8f 00 00 00 00 10 00 11 2c 11 02
> 50: 40 00 11 30 60 08 11 00 00 00 40 01 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 90 01 00 0c 30 e0 fe 69 41 00 00 00 00 00 00
> 90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 11 88 00 00 00 00
> e0: 00 0f c7 84 06 07 08 00 31 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
> Express Port 5 [8086:2847] (rev 03)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
>         I/O behind bridge: 00002000-00003fff
>         Memory behind bridge: d8000000-dbffffff
>         Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
>         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>                 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>         Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> unlimited, L1 unlimited
>                         ExtTag- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
>                 LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <1us, L1 <4us
>                         ClockPM- Suprise- LLActRep+ BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-

CommClk-
>                     ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>             LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train-
>
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd-
> HotPlug+ Surpise+
>                         Slot #  5, PowerLimit 0.160000; Interlock- NoCompl-
>                 SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+
> CmdCplt- HPIrq- LinkChg-
>                         Control: AttnInd Unknown, PwrInd Unknown,
> Power- Interlock-
>                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt-
> PresDet- Interlock-
>                         Changed: MRL- PresDet- LinkState-
>                 RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal-
> PMEIntEna- CRSVisible-
>                 RootCap: CRSVisible-
>                 RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable+
>                 Address: fee0300c  Data: 4171
>         Capabilities: [90] Subsystem: Hewlett-Packard Company Device

[103c:30d7]
>     Capabilities: [a0] Power Management version 2
>             Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [100] Virtual Channel <?>
>         Capabilities: [180] Root Complex Link <?>
>         Kernel driver in use: pcieport
>         Kernel modules: shpchp
> 00: 86 80 47 28 07 04 10 00 03 00 04 06 10 00 81 00
> 10: 00 00 00 00 00 00 00 00 00 28 28 00 20 30 00 00
> 20: 00 d8 f0 db 21 80 31 80 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 04 00
> 40: 10 80 41 01 c0 8f 00 00 00 00 10 00 11 4c 11 05
> 50: 00 00 01 10 60 08 29 00 09 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 90 01 00 0c 30 e0 fe 71 41 00 00 00 00 00 00
> 90: 0d a0 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 11 c8 00 00 00 00
> e0: 00 0f c7 00 06 07 08 00 31 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #1 [8086:2830] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin A routed to IRQ 20
>     Region 4: I/O ports at 5060 [size=32]
>     Kernel driver in use: uhci_hcd
>
> 00: 86 80 30 28 05 00 80 02 03 00 03 0c 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 61 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #2 [8086:2831] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin B routed to IRQ 21
>     Region 4: I/O ports at 5080 [size=32]
>     Kernel driver in use: uhci_hcd
>
> 00: 86 80 31 28 05 00 80 02 03 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 81 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB UHCI Controller #3 [8086:2832] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin C routed to IRQ 18
>     Region 4: I/O ports at 50a0 [size=32]
>     Kernel driver in use: uhci_hcd
>
> 00: 86 80 32 28 05 00 80 02 03 00 03 0c 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: a1 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
> USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin A routed to IRQ 20
>     Region 0: Memory at dc528000 (32-bit, non-prefetchable) [size=1K]
>     Capabilities: [50] Power Management version 2
>             Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
>
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Debug port: BAR=1 offset=00a0
>         Kernel driver in use: ehci_hcd
> 00: 86 80 36 28 06 00 90 02 03 20 03 0c 00 00 00 00
> 10: 00 80 52 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 01 58 c2 c9 00 00 00 00 0a 00 a0 20 00 00 00 00
> 60: 20 20 9f 01 00 00 00 00 01 00 00 00 00 00 08 c0
> 70: 00 00 df 3f 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 88 85 40 00 86 0f 05 00 0a 17 02 20
>
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> [8086:2448] (rev f3) (prog-if 01)
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>         I/O behind bridge: 0000f000-00000fff
>         Memory behind bridge: fff00000-000fffff
>         Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>     BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>             PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>     Capabilities: [50] Subsystem: Hewlett-Packard Company Device 

[103c:30d7]
> 00: 86 80 48 24 07 01 10 00 f3 01 04 06 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 02 02 20 f0 00 80 22
> 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00
> 50: 0d 00 00 00 3c 10 d7 30 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC
> Interface Controller [8086:2815] (rev 03)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Capabilities: [e0] Vendor Specific Information <?>
>     Kernel modules: iTCO_wdt
>
> 00: 86 80 15 28 07 00 10 02 03 00 01 06 00 00 80 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
> 40: 01 10 00 00 80 00 00 00 01 11 00 00 10 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 80 80 80 80 92 00 00 00 80 80 80 80 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 10 00 00 3c 01 05 7c 00 00 00 00 00 00 00 00 00
> 90: e9 02 04 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 24 0e 00 00 e1 00 03 00 01 1c 0b 00 00 03 00 00
> b0: 00 00 f0 00 00 00 00 00 04 a0 62 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 33 22 11 00 67 45 00 00 00 c0 00 00 01 00 00 00
> e0: 09 00 0c 10 20 02 4c c3 60 00 00 00 00 00 00 00
> f0: 01 00 d9 fe 0c 69 22 00 86 0f 05 00 00 00 00 00
>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM
> (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a
> [Master SecP PriP])
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin A routed to IRQ 16
>     Region 0: I/O ports at 01f0 [size=8]
>     Region 1: I/O ports at 03f4 [size=1]
>     Region 2: I/O ports at 0170 [size=8]
>     Region 3: I/O ports at 0374 [size=1]
>     Region 4: I/O ports at 50c0 [size=16]
>     Kernel driver in use: ata_piix
>
> 00: 86 80 50 28 05 00 80 02 03 8a 01 01 00 00 00 00
> 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
> 20: c1 50 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
> 40: 03 e3 00 40 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM
> (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> > TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0
>     Interrupt: pin B routed to IRQ 30
>     Region 0: I/O ports at 13f0 [size=8]
>     Region 1: I/O ports at 15f4 [size=4]
>     Region 2: I/O ports at 1370 [size=8]
>     Region 3: I/O ports at 1574 [size=4]
>     Region 4: I/O ports at 5100 [size=32]
>     Region 5: Memory at dc529000 (32-bit, non-prefetchable) [size=2K]
>     Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>
> Queue=0/2 Enable+
>                 Address: fee0100c  Data: 41a9
>         Capabilities: [70] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [a8] SATA HBA <?>
>         Kernel driver in use: ahci
>         Kernel modules: ahci
> 00: 86 80 29 28 07 04 b0 02 03 01 06 01 00 00 00 00
> 10: f1 13 00 00 f5 15 00 00 71 13 00 00 75 15 00 00
> 20: 01 51 00 00 00 90 52 dc 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00
> 40: 07 a3 00 80 00 00 00 00 01 00 01 00 00 00 00 00
> 50: 00 00 00 00 11 10 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 70 05 00 0c 10 e0 fe a9 41 00 00 00 00 00 00
> 90: 40 00 03 01 80 01 00 7e 00 00 00 00 0c 00 00 00
> a0: 00 00 00 00 00 00 00 00 12 00 10 00 48 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 86 0f 05 00 00 00 00 00
>
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV516
> [Mobility Radeon X1350] [1002:7196]
>         Subsystem: Hewlett-Packard Company Device [103c:30d7]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 29
>         Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>         Region 1: I/O ports at 4000 [size=256]
>         Region 2: Memory at dc400000 (32-bit, non-prefetchable) [size=64K]
>         [virtual] Expansion ROM at dc420000 [disabled] [size=128K]
>         Capabilities: [50] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <4us, L1 unlimited
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s
> L1, Latency L0 <64ns, L1 <1us
>                         ClockPM- Suprise- LLActRep- BwNot-
>                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
> Retrain- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train-
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable+
>                 Address: 00000000fee0200c  Data: 41a1
>         Kernel driver in use: radeon
>         Kernel modules: radeon
> 00: 02 10 96 71 07 04 10 00 00 00 00 03 10 00 00 00
> 10: 08 00 00 d0 01 40 00 00 00 00 40 dc 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 d7 30
> 50: 01 58 02 06 00 00 00 00 10 80 11 00 a0 0f 2c 01
> 60: 10 08 00 00 01 0d 00 00 43 00 01 11 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 05 00 81 00 0c 20 e0 fe 00 00 00 00 a1 41 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
> 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
>         Subsystem: Hewlett-Packard Company Device [103c:135c]
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 31
>         Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [c8] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable+
>                 Address: 00000000fee0300c  Data: 41b1
>         Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 unlimited
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 128 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
> AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <128ns, L1 <64us
>                         ClockPM+ Suprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-

CommClk+
>                     ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
>             LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train-
>
> SlotClk+ DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [100] Advanced Error Reporting <?>
>         Capabilities: [140] Device Serial Number 5a-e1-58-ff-ff-bf-1c-00
>         Kernel driver in use: iwl3945
>         Kernel modules: iwl3945
> 00: 86 80 22 42 06 04 10 00 02 00 80 02 10 00 00 00
> 10: 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 5c 13
> 30: 00 00 00 00 c8 00 00 00 00 00 00 00 0a 01 00 00
> 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 00 00 0d
> d0: 05 e0 81 00 0c 30 e0 fe 00 00 00 00 b1 41 00 00
> e0: 10 00 11 00 c0 0e 00 00 10 08 10 00 11 1c 07 00
> f0: 40 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
>
> output of superiotool -deV:
> root@ubuntu:~/Dokumente/vrac# superiotool -deV
> superiotool r3844
> Probing for ALi Super I/O at 0x3f0...
>   Failed. Returned data: id=0xffff, rev=0xff
> Probing for ALi Super I/O at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xff
> Probing for Fintek Super I/O at 0x2e...
>   Failed. Returned data: vid=0x8400, id=0x0036
> Probing for Fintek Super I/O at 0x4e...
>   Failed. Returned data: vid=0xffff, id=0xffff
> Probing for ITE Super I/O (init=standard) at 0x2e...
>   Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=it8761e) at 0x2e...
>   Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=it8228e) at 0x2e...
>   Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id=0x3600, rev=0x0
> Probing for ITE Super I/O (init=standard) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8761e) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=it8228e) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
>   Failed. Returned data: id=0xffff, rev=0xf
> Probing for NSC Super I/O at 0x2e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x4e...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for NSC Super I/O at 0x15c...
>   Failed. Returned data: port=0xff, port+1=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
>   Failed. Returned data: id=0x36, rev=0x00
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
>   Failed. Returned data: id=0x00, rev=0x00
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
>   Failed. Returned data: id=0xff, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x88) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x89) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
>   Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
> No Super I/O found

[Andrew Goodbody]

On 10/07/2010 01:18, [e-mail] wrote:
> Hello,
>
> Just messed up a little bit with the code. Seems that the whole region f0000-
> fffff is write-protected. No idea what is actually stored in it and why it is
> write-protected apart it being rewritten by the HP flash utility when upgrading
> (but not when downgrading). So didn't find out anything, sad :|
>
> Best regards,
> Julius

The top 64KB (or 16KB on older boards) is often used to contain the 
'bootblock' by an OEM BIOS. This contains just enough code to verify the 
rest of the BIOS image and if a problem is detected to launch a means to 
flash in a new image. It is very often protected with a GPIO or jumper 
to control a write protect line to the flash device. When updating an 
OEM BIOS containing a bootblock it would not normally update the 
bootblock ever as that would risk making the recovery mechanism unusable 
so I am surprised when you say that the HP flash utlility updates it on 
an upgrade.

Andrew

Hello Andrew,

In my case it contains what seems to be a windows dll (begins with MZ and 
contains "This program cannot be run in DOS mode etc..."), doesn't look like a 
bootblock. I found out that it could somehow be linked with slic 2.1, a 
feature used to transparently validate Windows on OEMs. Sorry no jumper in 
sight on my laptop. But HP flash upgrades (and doesn't downgrade) that zone 
indeed.
Anyway not reflashing that zone doesn't seem do make any problem when flashing 
another bios version.
Thanks for your interest.

Best regards,
Julius

-- Ursprüngliche Nachricht:
Betreff: Re: [flashrom] Support for HP Compaq 6820s laptop
Datum: Samstag, 10. Juli 2010, 10:41:58
Von: Andrew Goodbody 
An:  [e-mail], [e-mail]
> On 10/07/2010 01:18, [e-mail] wrote:
> > Hello,
> >
> > Just messed up a little bit with the code. Seems that the whole region

f0000-
> > fffff is write-protected. No idea what is actually stored in it and why it

is
> > write-protected apart it being rewritten by the HP flash utility when

upgrading
> > (but not when downgrading). So didn't find out anything, sad :|
> >
> > Best regards,
> > Julius
>
> The top 64KB (or 16KB on older boards) is often used to contain the 
> 'bootblock' by an OEM BIOS. This contains just enough code to verify the 
> rest of the BIOS image and if a problem is detected to launch a means to 
> flash in a new image. It is very often protected with a GPIO or jumper 
> to control a write protect line to the flash device. When updating an 
> OEM BIOS containing a bootblock it would not normally update the 
> bootblock ever as that would risk making the recovery mechanism unusable 
> so I am surprised when you say that the HP flash utlility updates it on 
> an upgrade.
>
> Andrew

[Andrew Goodbody]

On 10/07/2010 15:39, [e-mail] wrote:
> Hello Andrew,
>
> In my case it contains what seems to be a windows dll (begins with MZ and
> contains "This program cannot be run in DOS mode etc..."), doesn't look like a
> bootblock. I found out that it could somehow be linked with slic 2.1, a
> feature used to transparently validate Windows on OEMs. Sorry no jumper in
> sight on my laptop. But HP flash upgrades (and doesn't downgrade) that zone
> indeed.
> Anyway not reflashing that zone doesn't seem do make any problem when flashing
> another bios version.
> Thanks for your interest.
>
> Best regards,
> Julius

Well it contains the boot vector at ffff:0 and if you can update the 
BIOS without updating that section then it IS a bootblock of some sort, 
or at least part of it is, but it may not contain recovery code which 
may be why it is allowed to be updated. It may however contain other 
things that do not want or need to change on a BIOS update and this may 
include the data used to implement SLIC (which has to be loaded into an 
ACPI table). For certain it has to know how to find the entry point to 
the main BIOS which may not be the same as the one it was built for, 
although if that is a fixed point then there is no magic.
The MZ header etc just reflects that that part was built with tools 
normally used for creating Windows executables, not what sort of content 
it actually is.

Andrew