flashrom output from cardbus sata sil adapter

################# FLASHROM OUTPUT ##############################

flashrom -p satasii flashrom v0.9.2-r1001
on Linux 2.6.34.7-61.fc13.x86_64 (x86_64), built with libpci 3.1.6, GCC
4.4.4 20100503 (Red Hat 4.4.4-2) flashrom is free software, get the
source code at http://www.flashrom.org

Found "Silicon Image SiI 3512 [SATALink/SATARaid] SATA
Ctrl" (1095:3512, BDF 16:00.0). ===
This PCI device is UNTESTED. Please report the 'flashrom -p xxxx'
output to [e-mail] if it works for you. Thank you for your
help! ===
Mapping SATA SIL registers at 0xc4000000, unaligned size 0x100.
Warning: Flash seems unconnected.
Calibrating delay loop... OK.
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found
automatically.

################# FLASHROM OUTPUT ##############################

[Peter Lemenkov]

Hello!

2010/11/1  :
> ################# FLASHROM OUTPUT ##############################
>
> flashrom -p satasii flashrom v0.9.2-r1001
> on Linux 2.6.34.7-61.fc13.x86_64 (x86_64), built with libpci 3.1.6, GCC
> 4.4.4 20100503 (Red Hat 4.4.4-2) flashrom is free software, get the
> source code at http://www.flashrom.org

Just FYI - I already uploaded pre-0.9.3 (svn ver. 1205) into
updates-testing. You may upgrade by typing:

$ sudo yum upgrade flashrom --enablerepo updates-testing