Dear Sirs,
I realised that I have to type the full path to the flashrom located in /home/guy/flashrom-0.1.9-r792. Before I assumed that the flashrom in the current directory would be executed, This assumption is wrong. guy@asus-p4b:~/flashrom-0.9.1-r792$ sudo /home/guy/flashrom-0.9.1-r792/flashrom -r 1008.bin flashrom v0.9.1-r792 No coreboot table found. Found chipset "Intel ICH2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "ASUS P4B266"... Intel ICH LPC Bridge: Raising GPIO22. OK. Calibrating delay loop... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000. Reading flash... done. guy@asus-p4b:~/flashrom-0.9.1-r792$ sudo /home/guy/flashrom-0.9.1-r792/flashrom -w 1012.bin flashrom v0.9.1-r792 No coreboot table found. Found chipset "Intel ICH2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Disabling flash write protection for board "ASUS P4B266"... Intel ICH LPC Bridge: Raising GPIO22. OK. Calibrating delay loop... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: 0000 at address: 0x00000000ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x00003fff: 0x3fc0 ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom@flashrom.org! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! guy@asus-p4b:~/flashrom-0.9.1-r792$
-
guy lacroix