Re: [flashrom] [PATCH] Add coreboot IDs to make manual selection of HP xw9400 possible

[Carl-Daniel Hailfinger]

[stripped all people from CC, because it is unlikely they are still
interested]

Auf 02.06.2010 09:08, Michael Karcher schrieb:
> you experience problems trying to flash back to the HP BIOS, because with
> the original Tyan BIOS, flashrom is unable to detect you have the HP OEM 
> version of the board. This is why flashrom does not remove write protection
> anymore. The attached patch adds a coreboot ID for the HP xw9400 board, which
> makes it possible to tell flashrom you are on an xw9400 from the command line.

Acked-by: Carl-Daniel Hailfinger

Regards,
Carl-Daniel

[PATCH] Add coreboot IDs to make manual selection of HP xw9400 possible

[Michael Karcher]

Am Sonntag, den 06.03.2011, 00:22 +0100 schrieb Carl-Daniel Hailfinger:
> > anymore. The attached patch adds a coreboot ID for the HP xw9400 board, which
> > makes it possible to tell flashrom you are on an xw9400 from the command line.
>
> Acked-by: Carl-Daniel Hailfinger

Comitted in 1267, thanks for your review.

Regards,
  Michael Karcher