Re: [flashrom] Unsupported 3com device (3c905 100BaseTX [Boomerang])

[san]

Not sure if it's FCC ID:
FAB 02-0172-004 Rev A on the back side.

On front side:
3c905B-TX
Fast Etherlink
XL PCI

03-0172-410 D

EA=0050044B4FB9
SN=6TQ24B4FB9

2013/10/23 san
> W29EE011 does work with no problems.
>
> 2013/10/23 san
> > I have unsupported one, so i won't use it.
> >
> > PM29F002T is too big (256kB over 128kB).
> > It does work at last for read.
> >
> > When erase it does work about 1/3 times.
> > Once i suceed to write (after erase), and whole chip was programmed well!
> >
> > There is something wrong with erase function in nic3com, as i belive...
> >
> > Later i'll try to use W29EE011 (128kB).
> >
> > Regards!
> >
> > 2013/10/22 san
> > > Hi!
> > >
> > > I own:
> > > 02:00.0 Ethernet controller [0200]: 3Com Corporation 3c905 100BaseTX
> > > [Boomerang] [10b7:9050]
> > >
> > > It's unsupported:
> > > ---[code]---
> > > Error: No supported PCI device found.
> > > Error: Programmer initialization failed.
> > > ---[/code]---
> > >
> > > I would love to help You to get it to work with flashrom.
> > > Do You need it?
> > >
> > > Regards!