flashrom support for Epox EP-8K5A2

[David Borg]

Hi Kevin,

According to this email
http://www.coreboot.org/pipermail/coreboot/2009-May/047810.html you
were the original tester for the Epox 8k5a2 motherboard.
I cannot find the output of superiotool for this motherboard, needed
for some documentation clarifications.

Replying to the mailing list with the output of the following commands
(run as root) would be greatly appreciated:

superiotool -deV
lspci -nnvvvxxx

In case superiotool is not installed, you can follow installation
instructions here: http://www.coreboot.org/Superiotool (under the
Installation section).

Thanks and regards,

David Borg

[Kevin Sopp]

Hello David,

sadly the Epox Board wandered into the box with all the other old
computer parts since I upgraded my pc and I won't get around to
plugging it in again.

Sorry about that, I would love to help and If I had more freetime I
would but alas that's not the case at the moment.

Kevin Sopp

On Sun, Aug 1, 2010 at 8:24 PM, David Borg  wrote:
> Hi Kevin,
>
> According to this email
> http://www.coreboot.org/pipermail/coreboot/2009-May/047810.html you
> were the original tester for the Epox 8k5a2 motherboard.
> I cannot find the output of superiotool for this motherboard, needed
> for some documentation clarifications.
>
> Replying to the mailing list with the output of the following commands
> (run as root) would be greatly appreciated:
>
> superiotool -deV
> lspci -nnvvvxxx
>
> In case superiotool is not installed, you can follow installation
> instructions here: http://www.coreboot.org/Superiotool (under the
> Installation section).
>
> Thanks and regards,
>
> David Borg

[David Borg]

No problem then, I understand.
Thanks again for your time!

Regards,

David

On 1 August 2010 20:39, Kevin Sopp  wrote:
> Hello David,
>
> sadly the Epox Board wandered into the box with all the other old
> computer parts since I upgraded my pc and I won't get around to
> plugging it in again.
>
> Sorry about that, I would love to help and If I had more freetime I
> would but alas that's not the case at the moment.
>
> Kevin Sopp
>
> On Sun, Aug 1, 2010 at 8:24 PM, David Borg  wrote:
> > Hi Kevin,
> >
> > According to this email
> > http://www.coreboot.org/pipermail/coreboot/2009-May/047810.html you
> > were the original tester for the Epox 8k5a2 motherboard.
> > I cannot find the output of superiotool for this motherboard, needed
> > for some documentation clarifications.
> >
> > Replying to the mailing list with the output of the following commands
> > (run as root) would be greatly appreciated:
> >
> > superiotool -deV
> > lspci -nnvvvxxx
> >
> > In case superiotool is not installed, you can follow installation
> > instructions here: http://www.coreboot.org/Superiotool (under the
> > Installation section).
> >
> > Thanks and regards,
> >
> > David Borg