An opaque programmer does not allow direct flash access and only offers abstract probe/read/erase/write methods. Examples are ICH Hardware Sequencing and direct firmware uploads.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net --- Makefile | 2 +- chipdrivers.h | 6 ++++ flash.h | 3 +- flashchips.c | 25 +++++++++++++++- flashchips.h | 3 ++ opaque.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ print.c | 2 + programmer.h | 13 ++++++++ 8 files changed, 144 insertions(+), 3 deletions(-) create mode 100644 opaque.c
diff --git a/Makefile b/Makefile index 4a8dc2c..afbdd97 100644 --- a/Makefile +++ b/Makefile @@ -242,7 +242,7 @@ endif CHIP_OBJS = jedec.o stm50flw0x0x.o w39.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o sharplhf00l04.o \ - a25.o at25.o + a25.o at25.o opaque.o
LIB_OBJS = layout.o
diff --git a/chipdrivers.h b/chipdrivers.h index 958c59a..2746e52 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -58,6 +58,12 @@ int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int spi_write_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize); int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len);
+/* opaque.c */ +int probe_opaque(struct flashchip *flash); +int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len); +int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len); +int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); + /* a25.c */ int spi_prettyprint_status_register_amic_a25l05p(struct flashchip *flash); int spi_prettyprint_status_register_amic_a25l40p(struct flashchip *flash); diff --git a/flash.h b/flash.h index 535c1b8..8ad2845 100644 --- a/flash.h +++ b/flash.h @@ -62,8 +62,9 @@ enum chipbustype { BUS_LPC = 1 << 1, BUS_FWH = 1 << 2, BUS_SPI = 1 << 3, + BUS_PROG = 1 << 4, BUS_NONSPI = BUS_PARALLEL | BUS_LPC | BUS_FWH, - BUS_UNKNOWN = BUS_PARALLEL | BUS_LPC | BUS_FWH | BUS_SPI, + BUS_UNKNOWN = BUS_PARALLEL | BUS_LPC | BUS_FWH | BUS_SPI | BUS_PROG, };
/* diff --git a/flashchips.c b/flashchips.c index d520a1c..2f21d49 100644 --- a/flashchips.c +++ b/flashchips.c @@ -8872,7 +8872,29 @@ const struct flashchip flashchips[] = { .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, - +#if defined(CONFIG_INTERNAL) && (defined(__i386__) || defined(__x86_64__)) + { + .vendor = "Programmer", + .name = "Opaque flash chip", + .bustype = BUS_PROG, + .manufacture_id = PROGMANUF_ID, + .model_id = PROGDEV_ID, + .total_size = 0, + .page_size = 256, + /* probe is assumed to work, rest will be filled in by probe */ + .tested = TEST_OK_PROBE, + .probe = probe_opaque, + /* eraseblock sizes will be set by the probing function */ + .block_erasers = + { + { + .block_erase = erase_opaque, + } + }, + .write = write_opaque, + .read = read_opaque, + }, +#endif // defined(CONFIG_INTERNAL) && (defined(__i386__) || defined(__x86_64__)) { .vendor = "AMIC", .name = "unknown AMIC SPI chip", @@ -9005,6 +9027,7 @@ const struct flashchip flashchips[] = { .probe = probe_spi_rdid, .write = NULL, }, + { .vendor = "Generic", .name = "unknown SPI chip (REMS)", diff --git a/flashchips.h b/flashchips.h index 2c939e4..03efb86 100644 --- a/flashchips.h +++ b/flashchips.h @@ -646,4 +646,7 @@ #define WINBOND_W49V002A 0xB0 #define WINBOND_W49V002FA 0x32
+#define PROGMANUF_ID 0xFFFE /* dummy ID for opaque chips behind a programmer */ +#define PROGDEV_ID 0x01 /* dummy ID for opaque chips behind a programmer */ + #endif /* !FLASHCHIPS_H */ diff --git a/opaque.c b/opaque.c new file mode 100644 index 0000000..ca0d9ef --- /dev/null +++ b/opaque.c @@ -0,0 +1,93 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2011 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Contains the opaque programmer framework. + * An opaque programmer is a programmer which does not provide direct access + * to the flash chip and which abstracts all flash chip properties into a + * programmer specific interface. + */ + +#include <strings.h> +#include <string.h> +#include "flash.h" +#include "flashchips.h" +#include "chipdrivers.h" +#include "programmer.h" + +const struct opaque_programmer opaque_programmer_none = { + .max_data_read = MAX_DATA_UNSPECIFIED, + .max_data_write = MAX_DATA_UNSPECIFIED, + .probe = NULL, + .read = NULL, + .write = NULL, +}; + +const struct opaque_programmer *opaque_programmer = &opaque_programmer_none; + +int probe_opaque(struct flashchip *flash) +{ + if (!opaque_programmer->probe) { + msg_perr("%s called, but this is not an opaque programmer. " + "Please report a bug at flashrom@flashrom.org\n", + __func__); + return 0; + } + + return opaque_programmer->probe(flash); +} + +int read_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) +{ + if (!opaque_programmer->read) { + msg_perr("%s called, but this is not an opaque programmer. " + "Please report a bug at flashrom@flashrom.org\n", + __func__); + return 1; + } + return opaque_programmer->read(flash, buf, start, len); +} + +int write_opaque(struct flashchip *flash, uint8_t *buf, int start, int len) +{ + if (!opaque_programmer->write) { + msg_perr("%s called, but this is not an opaque programmer. " + "Please report a bug at flashrom@flashrom.org\n", + __func__); + return 1; + } + return opaque_programmer->write(flash, buf, start, len); +} + +int erase_opaque(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen) +{ + if (!opaque_programmer->erase) { + msg_perr("%s called, but this is not an opaque programmer. " + "Please report a bug at flashrom@flashrom.org\n", + __func__); + return 1; + } + return opaque_programmer->erase(flash, blockaddr, blocklen); +} + +void register_opaque_programmer(const struct opaque_programmer *pgm) +{ + opaque_programmer = pgm; + buses_supported |= BUS_PROG; +} diff --git a/print.c b/print.c index bcb1629..0f141b2 100644 --- a/print.c +++ b/print.c @@ -49,6 +49,8 @@ char *flashbuses_to_text(enum chipbustype bustype) ret = strcat_realloc(ret, "FWH, "); if (bustype & BUS_SPI) ret = strcat_realloc(ret, "SPI, "); + if (bustype & BUS_PROG) + ret = strcat_realloc(ret, "Programmer-specific, "); if (bustype == BUS_NONE) ret = strcat_realloc(ret, "None, "); } diff --git a/programmer.h b/programmer.h index 73b94c1..85c815f 100644 --- a/programmer.h +++ b/programmer.h @@ -601,6 +601,19 @@ int sb600_probe_spi(struct pci_dev *dev); int wbsio_check_for_spi(void); #endif
+/* opaque.c */ +struct opaque_programmer { + int max_data_read; + int max_data_write; + /* Specific functions for this programmer */ + int (*probe) (struct flashchip *flash); + int (*read) (struct flashchip *flash, uint8_t *buf, int start, int len); + int (*write) (struct flashchip *flash, uint8_t *buf, int start, int len); + int (*erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); +}; +extern const struct opaque_programmer *opaque_programmer; +void register_opaque_programmer(const struct opaque_programmer *pgm); + /* serprog.c */ #if CONFIG_SERPROG == 1 int serprog_init(void);
-
Stefan Tauner