We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols are already there (defined for the chipset enable table).
Signed-off-by: Michael Karcher flashrom@mkarcher.dialup.fu-berlin.de --- drkaiser.c | 2 +- flash.h | 2 -- gfxnvidia.c | 46 +++++++++++++++++++++++----------------------- nic3com.c | 20 ++++++++++---------- satasii.c | 12 ++++++------ 5 files changed, 40 insertions(+), 42 deletions(-)
diff --git a/drkaiser.c b/drkaiser.c index f13c13e..572fee3 100644 --- a/drkaiser.c +++ b/drkaiser.c @@ -29,7 +29,7 @@ #define PCI_MAGIC_DRKAISER_VALUE 0xa971
struct pcidev_status drkaiser_pcidev[] = { - {0x1803, 0x5057, PCI_OK, "Dr. Kaiser", "PC-Waechter (Actel FPGA)"}, + {0x1803, 0x5057, OK, "Dr. Kaiser", "PC-Waechter (Actel FPGA)"}, {}, };
diff --git a/flash.h b/flash.h index 308e19b..ace2b1b 100644 --- a/flash.h +++ b/flash.h @@ -298,8 +298,6 @@ void internal_delay(int usecs);
#if NEED_PCI == 1 /* pcidev.c */ -#define PCI_OK 0 -#define PCI_NT 1 /* Not tested */
extern uint32_t io_base_addr; extern struct pci_access *pacc; diff --git a/gfxnvidia.c b/gfxnvidia.c index cc66ace..ec41279 100644 --- a/gfxnvidia.c +++ b/gfxnvidia.c @@ -28,29 +28,29 @@ uint8_t *nvidia_bar;
struct pcidev_status gfx_nvidia[] = { - {0x10de, 0x0010, PCI_NT, "NVIDIA", "Mutara V08 [NV2]" }, - {0x10de, 0x0018, PCI_NT, "NVIDIA", "RIVA 128" }, - {0x10de, 0x0020, PCI_NT, "NVIDIA", "RIVA TNT" }, - {0x10de, 0x0028, PCI_NT, "NVIDIA", "RIVA TNT2/TNT2 Pro" }, - {0x10de, 0x0029, PCI_NT, "NVIDIA", "RIVA TNT2 Ultra" }, - {0x10de, 0x002c, PCI_NT, "NVIDIA", "Vanta/Vanta LT" }, - {0x10de, 0x002d, PCI_OK, "NVIDIA", "RIVA TNT2 Model 64/Model 64 Pro" }, - {0x10de, 0x00a0, PCI_NT, "NVIDIA", "Aladdin TNT2" }, - {0x10de, 0x0100, PCI_NT, "NVIDIA", "GeForce 256" }, - {0x10de, 0x0101, PCI_NT, "NVIDIA", "GeForce DDR" }, - {0x10de, 0x0103, PCI_NT, "NVIDIA", "Quadro" }, - {0x10de, 0x0110, PCI_NT, "NVIDIA", "GeForce2 MX" }, - {0x10de, 0x0111, PCI_NT, "NVIDIA", "GeForce2 MX" }, - {0x10de, 0x0112, PCI_NT, "NVIDIA", "GeForce2 GO" }, - {0x10de, 0x0113, PCI_NT, "NVIDIA", "Quadro2 MXR" }, - {0x10de, 0x0150, PCI_NT, "NVIDIA", "GeForce2 GTS/Pro" }, - {0x10de, 0x0151, PCI_NT, "NVIDIA", "GeForce2 GTS" }, - {0x10de, 0x0152, PCI_NT, "NVIDIA", "GeForce2 Ultra" }, - {0x10de, 0x0153, PCI_NT, "NVIDIA", "Quadro2 Pro" }, - {0x10de, 0x0200, PCI_NT, "NVIDIA", "GeForce 3 nFX" }, - {0x10de, 0x0201, PCI_NT, "NVIDIA", "GeForce 3 nFX" }, - {0x10de, 0x0202, PCI_NT, "NVIDIA", "GeForce 3 nFX Ultra" }, - {0x10de, 0x0203, PCI_NT, "NVIDIA", "Quadro 3 DDC" }, + {0x10de, 0x0010, NT, "NVIDIA", "Mutara V08 [NV2]" }, + {0x10de, 0x0018, NT, "NVIDIA", "RIVA 128" }, + {0x10de, 0x0020, NT, "NVIDIA", "RIVA TNT" }, + {0x10de, 0x0028, NT, "NVIDIA", "RIVA TNT2/TNT2 Pro" }, + {0x10de, 0x0029, NT, "NVIDIA", "RIVA TNT2 Ultra" }, + {0x10de, 0x002c, NT, "NVIDIA", "Vanta/Vanta LT" }, + {0x10de, 0x002d, OK, "NVIDIA", "RIVA TNT2 Model 64/Model 64 Pro" }, + {0x10de, 0x00a0, NT, "NVIDIA", "Aladdin TNT2" }, + {0x10de, 0x0100, NT, "NVIDIA", "GeForce 256" }, + {0x10de, 0x0101, NT, "NVIDIA", "GeForce DDR" }, + {0x10de, 0x0103, NT, "NVIDIA", "Quadro" }, + {0x10de, 0x0110, NT, "NVIDIA", "GeForce2 MX" }, + {0x10de, 0x0111, NT, "NVIDIA", "GeForce2 MX" }, + {0x10de, 0x0112, NT, "NVIDIA", "GeForce2 GO" }, + {0x10de, 0x0113, NT, "NVIDIA", "Quadro2 MXR" }, + {0x10de, 0x0150, NT, "NVIDIA", "GeForce2 GTS/Pro" }, + {0x10de, 0x0151, NT, "NVIDIA", "GeForce2 GTS" }, + {0x10de, 0x0152, NT, "NVIDIA", "GeForce2 Ultra" }, + {0x10de, 0x0153, NT, "NVIDIA", "Quadro2 Pro" }, + {0x10de, 0x0200, NT, "NVIDIA", "GeForce 3 nFX" }, + {0x10de, 0x0201, NT, "NVIDIA", "GeForce 3 nFX" }, + {0x10de, 0x0202, NT, "NVIDIA", "GeForce 3 nFX Ultra" }, + {0x10de, 0x0203, NT, "NVIDIA", "Quadro 3 DDC" },
{}, }; diff --git a/nic3com.c b/nic3com.c index a4878d2..d3dcce5 100644 --- a/nic3com.c +++ b/nic3com.c @@ -36,20 +36,20 @@ uint16_t id;
struct pcidev_status nics_3com[] = { /* 3C90xB */ - {0x10b7, 0x9055, PCI_OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"}, - {0x10b7, 0x9001, PCI_NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" }, - {0x10b7, 0x9004, PCI_OK, "3COM", "3C90xB: PCI 10BASE-T (TPO)" }, - {0x10b7, 0x9005, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" }, - {0x10b7, 0x9006, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" }, - {0x10b7, 0x900a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FL" }, - {0x10b7, 0x905a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FX" }, - {0x10b7, 0x9058, PCI_OK, "3COM", "3C905B: Cyclone 10/100/BNC" }, + {0x10b7, 0x9055, OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"}, + {0x10b7, 0x9001, NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" }, + {0x10b7, 0x9004, OK, "3COM", "3C90xB: PCI 10BASE-T (TPO)" }, + {0x10b7, 0x9005, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" }, + {0x10b7, 0x9006, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" }, + {0x10b7, 0x900a, NT, "3COM", "3C90xB: PCI 10BASE-FL" }, + {0x10b7, 0x905a, NT, "3COM", "3C90xB: PCI 10BASE-FX" }, + {0x10b7, 0x9058, OK, "3COM", "3C905B: Cyclone 10/100/BNC" },
/* 3C905C */ - {0x10b7, 0x9200, PCI_OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" }, + {0x10b7, 0x9200, OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" },
/* 3C980C */ - {0x10b7, 0x9805, PCI_NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" }, + {0x10b7, 0x9805, NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" },
{}, }; diff --git a/satasii.c b/satasii.c index 90995c9..90d38bd 100644 --- a/satasii.c +++ b/satasii.c @@ -30,12 +30,12 @@ uint8_t *sii_bar; uint16_t id;
struct pcidev_status satas_sii[] = { - {0x1095, 0x0680, PCI_OK, "Silicon Image", "PCI0680 Ultra ATA-133 Host Ctrl"}, - {0x1095, 0x3112, PCI_OK, "Silicon Image", "SiI 3112 [SATALink/SATARaid] SATA Ctrl"}, - {0x1095, 0x3114, PCI_OK, "Silicon Image", "SiI 3114 [SATALink/SATARaid] SATA Ctrl"}, - {0x1095, 0x3124, PCI_NT, "Silicon Image", "SiI 3124 PCI-X SATA Ctrl"}, - {0x1095, 0x3132, PCI_OK, "Silicon Image", "SiI 3132 SATA Raid II Ctrl"}, - {0x1095, 0x3512, PCI_NT, "Silicon Image", "SiI 3512 [SATALink/SATARaid] SATA Ctrl"}, + {0x1095, 0x0680, OK, "Silicon Image", "PCI0680 Ultra ATA-133 Host Ctrl"}, + {0x1095, 0x3112, OK, "Silicon Image", "SiI 3112 [SATALink/SATARaid] SATA Ctrl"}, + {0x1095, 0x3114, OK, "Silicon Image", "SiI 3114 [SATALink/SATARaid] SATA Ctrl"}, + {0x1095, 0x3124, NT, "Silicon Image", "SiI 3124 PCI-X SATA Ctrl"}, + {0x1095, 0x3132, OK, "Silicon Image", "SiI 3132 SATA Raid II Ctrl"}, + {0x1095, 0x3512, NT, "Silicon Image", "SiI 3512 [SATALink/SATARaid] SATA Ctrl"},
{}, };
-
Michael Karcher