I had recently had a bios update fail on my X-570
prime pro motherboard.
I'm not the most well versed in linux, and I downloaded it via sudo apt-get
install flashrom. It looks like this installed version 0.9.9. I'm not sure
if this version is the one I should use with the bios chip, which I believe
is a MX25U2564G. I also downloaded the 1.2 zip file, but how to build it
with linux. Do you have any recommended steps I should follow or what I
need to type into the terminal if version 0.9.9 doesn't work?
You can safely perform read operations with Flashrom without hurting
anything. Try 0.9.9 first and see if it works for that. It will warn you
if write operations are unsupported.
- don't top post
Mailing list etiquette:
- trim quoted reply to only relevant portions
- when possible, copy and paste text instead of screenshots