Re: [flashrom] Intel DQ67SW report

[Stefan Tauner]

On Thu, 6 Oct 2011 13:51:03 +0300
Dima Tisnek  wrote:
> root@quilt ~ # flashrom -Vr test.fw
> flashrom v0.9.4-r1395 on Linux 3.0-ARCH (x86_64), built with libpci
> […]
> 0x54: 0x00000000 (FREG0: Flash Descriptor)
> 0x00000000-0x00000fff is read-only
> 0x58: 0x07ff0580 (FREG1: BIOS)
> 0x00580000-0x007fffff is read-write
> 0x5C: 0x057f0003 (FREG2: Management Engine)
> 0x00003000-0x0057ffff is locked
> 0x60: 0x00020001 (FREG3: Gigabit Ethernet)
> 0x00001000-0x00002fff is read-write
> 0x64: 0x00001fff (FREG4: Platform Data)
> Platform Data region is unused.
> […]
>
> Reading flash... Transaction error!
> SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0
> SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=4
> Running OPCODE 0x03 failed at address 0x003000 (payload length was 64).
> Read operation failed!
> FAILED.

hello dima and thanks for your report!

a part of the flash is locked by the chipset and we are not able to
unlock it (yet). in case you want to update the firmware please use the
tools from intel, sorry.

Intel DQ67SW report

[Dima Tisnek]

I suppose they better lock BIOS as they have all these TPM, remote
support and other security features, although I have these turned off
;-)

thanks for the reply!

d.

On 6 October 2011 23:53, Stefan Tauner
 wrote:
> On Thu, 6 Oct 2011 13:51:03 +0300
> Dima Tisnek  wrote:
> > root@quilt ~ # flashrom -Vr test.fw
> > flashrom v0.9.4-r1395 on Linux 3.0-ARCH (x86_64), built with libpci
> > […]
> > 0x54: 0x00000000 (FREG0: Flash Descriptor)
> > 0x00000000-0x00000fff is read-only
> > 0x58: 0x07ff0580 (FREG1: BIOS)
> > 0x00580000-0x007fffff is read-write
> > 0x5C: 0x057f0003 (FREG2: Management Engine)
> > 0x00003000-0x0057ffff is locked
> > 0x60: 0x00020001 (FREG3: Gigabit Ethernet)
> > 0x00001000-0x00002fff is read-write
> > 0x64: 0x00001fff (FREG4: Platform Data)
> > Platform Data region is unused.
> > […]
> >
> > Reading flash... Transaction error!
> > SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0
> > SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=4
> > Running OPCODE 0x03 failed at address 0x003000 (payload length was 64).
> > Read operation failed!
> > FAILED.
>
> hello dima and thanks for your report!
>
> a part of the flash is locked by the chipset and we are not able to
> unlock it (yet). in case you want to update the firmware please use the
> tools from intel, sorry.
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner