Winbond W25X32 Read, Erase and Write tested (with serprog Arduino-Programmer) and all works!

[The Raven]

See the attached Logs for details.
All Operations seems to work.
I have done more than one "read" and the verify is always ok.

If you need more tests or something else, let me know.

Greetings

Raven

[Stefan Tauner]

On Thu, 17 Apr 2014 09:58:21 +0200
The Raven <[e-mail]> wrote:
> See the attached Logs for details.
> All Operations seems to work.
> I have done more than one "read" and the verify is always ok.
>
> If you need more tests or something else, let me know.
>
> Greetings
>
> Raven

Hello,

thanks for your report!
I have marked the flash chip as fully tested and will commit that later
together with other small changes. Just a small note: your write test
does only test the first sector. While this is no problem for this
pretty much standard chip, I would appreciate tests with random data in
the whole image in the future if you don't mind the extra work. This
would increase the test coverage and that's always a good thing :)
No need to re-test this one though.
-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner

[The Raven]

Wow, you have a good eye! ;)
I haven't seen/realize this! So tested again with full data until
"0x3ff000-0x3fffff:W".
And it works. All ok.

THX
> Hello,
>
> thanks for your report!
> I have marked the flash chip as fully tested and will commit that later
> together with other small changes. Just a small note: your write test
> does only test the first sector. While this is no problem for this
> pretty much standard chip, I would appreciate tests with random data in
> the whole image in the future if you don't mind the extra work. This
> would increase the test coverage and that's always a good thing :)
> No need to re-test this one though.