Hi Konstantin,
we will help you.
On 02.09.2010 13:21, hc@comp.susu.ac.ru wrote:
I've tried to reflash my Gigabyte GA-6IEM with BIOS version F7 and got this output:
Lock status for 0x000000 (size 0x004000) is 00, full access [...] Lock status for 0x03c000 (size 0x004000) is 00, full access Writing flash chip... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x00000fff: 0xff4 Looking at blockwise erase function 1... trying... 0x000000-0x003fff, ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x00003fff: 0x3fb3
This looks like nothing changed.
[root@rr-is ~]# flashrom flashrom v0.9.2-r1001 on Linux 2.6.18-194.11.1.el5 (i686), built with libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-48) flashrom is free software, get the source code at http://www.flashrom.org
No coreboot table found. Found ITE Super I/O, id 8712 Found chipset "Intel ICH2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000.
Did you create a backup with "flashrom -r backup.rom" before you started to write? If yes, please run flashrom -Vv backup.rom If it says "VERIFIED", nothing was changed and it is safe to reboot. If it complains, we will help you recover.
It looks like we need a board enable for your board. BIOS update can be downloaded at http://download.gigabyte.eu/FileList/BIOS/motherboard_bios_6iem_f7.exe
Please upgrade to latest flashrom from svn and reply with the output from flashrom -V superiotool -deV lspci -nnvvvxxx Please run all commands as root.
Regards, Carl-Daniel