[flashrom] Error on W25Q80

[Bernd Van Praet]

Hi,

I’m getting following report:

Calibrating delay loop... OK.
Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) on ch341a_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00007000! Expected=0x76, Found=0xff, failed byte count from 0x00000000-0x000fffff: 0x2451
Your flash chip is in an unknown state.
Please report this to the mailing list at [e-mail] or
on IRC (see https://www.flashrom.org/Contact for details), thanks!

Kind regards,

Bernd Van Praet