-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hmm I just tried on VT8237S and I got Found chip "Winbond W25Q80" (1024 KB, SPI) at physical address 0xfff00000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, - -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Writing flash chip... Erasing flash before programming... Erasing flash chip... spi_block_erase_20 failed during command execution at address 0x0 spi_block_erase_52 failed during command execution at address 0x0 SUCCESS. done. Programming page: COMPLETE. Verifying flash... VERIFIED. So either I did some mistake or something else is wrong ;) Rudolf -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkvOArQACgkQ3J9wPJqZRNXaaACfbAdJv6eCN2dF2owpN486VB85 nAYAn01T6SWMuiHueuyOLxE7vPdC9ne7 =AOIg -----END PGP SIGNATURE-----