#7: Using serprog to flash a winbond W25Q16 --------------------------+---------------------------------- Reporter: anonymous | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: flashrom 0.9.2 Component: flashrom | Version: 0.9.0 Resolution: | Keywords: Single byte read Dependencies: | Patch Status: there is no patch --------------------------+----------------------------------
Comment (by anonymous):
Oh I forgot to mention, I'm using some header pins on the motherboard to hook up to the arduino, the pins I have plugged in are: Vcc > 3.3v from the arduino, Gnd > Gnd, Miso > Pin12, Mosi > Pin11, Clock > Pin13, CS > Pin10. Those are the only connections coming off the Header pins. So to list what I have hooked up: Miso Mosi VCC Gnd Clock CS
Am I missing something on the chip that I need to plug in?