- struct status_register defines added for the following chips (66 in total) - - AMIC(4) : A25L080, A25LQ16, A25LQ32A, A25L032 - Macronix(15) : MX25L6408E, MX25L6406E, MX25L1605D, MX25L3205D, MX25L6405D, MX25L1608D, MX25L3208D, MX25L6408D, MX25L6436E, MX25L6445E, MX25L6465E, MX25L12865E, MX25L12845E, MX25L12835F, MX25L1673E - GigaDevice(41) : GD25LQ16, GD25LQ40, GD25LQ80B, GD25LQ40B, GD25LQ64C, GD25LQ80, GD25LQ128C, GD25LQ32C, GD25LQ16, GD25LQ40, GD25LQ80B, GD25LQ40B, GD25LQ64C, GD25LQ80, GD25LQ128C, GD25LQ32C, GD25Q16B, GD25Q32B, GD25Q64B, GD25Q10, GD25Q16, GD25Q20, GD25Q40, GD25Q80, GD25VQ16C, GD25VQ80C, GD25Q16C, GD25Q40C, GD25VQ21B, GD25VQ41B, GD25Q21B, GD25Q41B, GD25Q80B, GD25Q128, GD25LQ05B, GD25LQ10B, GD25LQ20B, GD25Q32C, GD25Q64C, GD25Q127C, GD25Q128C - Winbond(6) : W25Q80, W25Q16, W25Q32, W25Q40BL, W25Q64FV, W25Q128FW - 16 of the above support new infrastructure (in flashchips.c) (WIP) - 19 unique struct definitions were required to represent all of the above chips. - Note that quite a few chips don't have support in flashrom (yet).
Signed-off-by: Hatim Kanchwala hatim@hatimak.me --- Makefile | 2 +- flashchips.c | 169 +++++++++++++++++++++++---- spi25_statusreg.h | 36 ++++++ statusreg_layouts.c | 320 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 505 insertions(+), 22 deletions(-) create mode 100644 statusreg_layouts.c
diff --git a/Makefile b/Makefile index de08492..ed4979e 100644 --- a/Makefile +++ b/Makefile @@ -504,27 +504,27 @@ endif ifeq ($(CONFIG_IT8212), yes) UNSUPPORTED_FEATURES += CONFIG_IT8212=yes else override CONFIG_IT8212 = no endif endif
############################################################################### # Flash chip drivers and bus support infrastructure.
CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \ sst28sf040.o 82802ab.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o spi25_statusreg.o \ - writeprotect.o opaque.o sfdp.o en29lv640b.o at45db.o + writeprotect.o statusreg_layouts.o opaque.o sfdp.o en29lv640b.o at45db.o
############################################################################### # Library code.
LIB_OBJS = layout.o flashrom.o udelay.o programmer.o helpers.o
############################################################################### # Frontend related stuff.
CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o
# Set the flashrom version string from the highest revision number of the checked out flashrom files. # Note to packagers: Any tree exported with "make export" or "make tarball" diff --git a/flashchips.c b/flashchips.c index 40b6b8e..0afd297 100644 --- a/flashchips.c +++ b/flashchips.c @@ -15,26 +15,27 @@ * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
#include "flash.h" #include "flashchips.h" #include "chipdrivers.h" +#include "spi25_statusreg.h"
/** * List of supported flash chips. * * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly * alphabetically sorted. Within families keep them in order of density. */ const struct flashchip flashchips[] = {
/* * .vendor = Vendor name * .name = Chip name * .bustype = Supported flash bus types (Parallel, LPC...) @@ -1155,27 +1156,28 @@ const struct flashchip flashchips[] = { .block_erasers = { { .eraseblocks = { { 4 * 1024, 256 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { { 64 * 1024, 16 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 1024 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp2_srwd, + /* TODO: Read/write 2nd status register */ + .status_register = &a25l080_sr, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, },
{ .vendor = "AMIC", .name = "A25L016", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25L016, .total_size = 2048, @@ -1265,36 +1267,37 @@ const struct flashchip flashchips[] = { .eraseblocks = { { 64 * 1024, 32 } }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 32 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 2048 * 1024, 1 } }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 2048 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + /* TODO: Read/write 2nd status register */ + .status_register = &a25lq16_32a_sr, + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, },
{ .vendor = "AMIC", - .name = "A25LQ032/A25LQ32A", + .name = "A25LQ032", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25LQ032, .total_size = 4096, .page_size = 256, /* A25LQ32A supports SFDP */ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -1305,27 +1308,68 @@ const struct flashchip flashchips[] = { .eraseblocks = { { 64 * 1024, 64 } }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { { 64 * 1024, 64 } }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { { 4096 * 1024, 1 } }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { { 4096 * 1024, 1 } }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + /* TODO: Read/write 2nd status register */ + .status_register = &a25l032_sr, + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25LQ32A", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ032, + .total_size = 4096, + .page_size = 256, + /* A25LQ32A supports SFDP */ + /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 1024 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 64 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .status_register = &a25lq16_32a_sr, .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, },
{ .vendor = "AMIC", .name = "A25LQ64", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25LQ64, .total_size = 8192, @@ -5660,28 +5704,29 @@ const struct flashchip flashchips[] = { .eraseblocks = { {32 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + /* TODO: Read/write 2nd status register */ + .status_register = &gd25lq_sr, + .unlock = spi_disable_blockprotect_bp4_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, },
{ .vendor = "GigaDevice", .name = "GD25LQ80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ80, .total_size = 1024, .page_size = 256, @@ -5699,28 +5744,29 @@ const struct flashchip flashchips[] = { .eraseblocks = { {32 * 1024, 32} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {1 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + /* TODO: Read/write 2nd status register*/ + .status_register = &gd25lq_sr, + .unlock = spi_disable_blockprotect_bp4_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, },
{ .vendor = "GigaDevice", .name = "GD25LQ16", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ16, .total_size = 2048, .page_size = 256, @@ -5738,28 +5784,29 @@ const struct flashchip flashchips[] = { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + /* TODO: Read/write 2nd status register */ + .status_register = &gd25lq_sr, + .unlock = spi_disable_blockprotect_bp4_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {1695, 1950}, },
{ .vendor = "GigaDevice", .name = "GD25LQ32", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25LQ32, .total_size = 4096, .page_size = 256, @@ -6050,27 +6097,66 @@ const struct flashchip flashchips[] = { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, .printlock = spi_prettyprint_status_register_bp4_srwd, .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, },
{ .vendor = "GigaDevice", - .name = "GD25Q16(B)", + .name = "GD25Q16", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + /* TODO: Read/write 2nd status register */ + .status_register = &gd25q10_20_40_80_sr, + .unlock = spi_disable_blockprotect_bp4_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q16B", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q16, .total_size = 2048, .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { @@ -6080,28 +6166,29 @@ const struct flashchip flashchips[] = { .eraseblocks = { {32 * 1024, 64} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + /* TODO: Read/write 2nd status register */ + .status_register = &gd25q16_32_64b_sr, + .unlock = spi_disable_blockprotect_bp4_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, },
{ .vendor = "GigaDevice", .name = "GD25Q32(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q32, .total_size = 4096, .page_size = 256, @@ -7515,53 +7602,88 @@ const struct flashchip flashchips[] = { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", - .name = "MX25L1605D/MX25L1608D/MX25L1673E", + .name = "MX25L1605D/MX25L1608D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L1605, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .status_register = &mx25lx5d_sr, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", + .name = "MX25L1673E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1605, .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */ + .status_register = &mx25lx65e_sr, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", .name = "MX25L1635D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1635D, .total_size = 2048, @@ -7684,27 +7806,27 @@ const struct flashchip flashchips[] = { .eraseblocks = { {4 * 1024, 1024} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 64} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {4 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, }, }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ + .status_register = &mx25lx5d_sr, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", .name = "MX25L3206E/MX25L3208E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L3205, .total_size = 4096, @@ -7870,27 +7992,27 @@ const struct flashchip flashchips[] = { .eraseblocks = { {4 * 1024, 2048} }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */ + .status_register = &mx25lx5d_sr, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", .name = "MX25L6406E/MX25L6408E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, @@ -7910,27 +8032,27 @@ const struct flashchip flashchips[] = { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, + .status_register = &mx25l64xe_sr, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, .total_size = 8192, @@ -7950,27 +8072,32 @@ const struct flashchip flashchips[] = { .eraseblocks = { {32 * 1024, 256} }, .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 128} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {8 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + /* FIXME: MX25L6473E has an additional configuration register (which behaves like + * a 2nd status register). + * FIXME: Datasheet for MX25L6473E indicates bit 7 is RESV (instead + * of SRWD), but similar chips have SRWD. + */ + .status_register = &mx25lx65e_sr, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", .name = "MX25L12805D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L12805D, .total_size = 16384, @@ -8026,27 +8153,27 @@ const struct flashchip flashchips[] = { .block_erase = spi_block_erase_52, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { .eraseblocks = { {16 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, /* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ + .status_register = &mx25lx65e_sr, .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, },
{ .vendor = "Macronix", .name = "MX25U1635E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25U1635E, .total_size = 2048, diff --git a/spi25_statusreg.h b/spi25_statusreg.h index b082f45..8bfffa0 100644 --- a/spi25_statusreg.h +++ b/spi25_statusreg.h @@ -66,14 +66,50 @@ enum wp_mode {
/* Status register is protected and can not be written to until next * power down/up cycle, post which status register will be unlocked * and can be written to after a WREN. */ WP_MODE_POWER_CYCLE,
/* Status register is permanently protected and cannot be written to. */ WP_MODE_PERMANENT, };
/* Describes corresponding bits from enum status_register_bit */ extern char *statreg_bit_desc[][2];
+/* === Single status register === */ +/* === AMIC === */ +extern struct status_register a25l080_sr; + +/* === Macronix === */ +extern struct status_register mx25l64xe_sr; +extern struct status_register mx25lx5d_sr; +extern struct status_register mx25lx65e_sr; + +/* === Double status registers === */ +/* === AMIC === */ +extern struct status_register a25lq16_32a_sr; +extern struct status_register a25l032_sr; + +/* === GigaDevice === */ +extern struct status_register gd25lq_sr; +extern struct status_register gd25q16_32_64b_sr; +extern struct status_register gd25q10_20_40_80_sr; +extern struct status_register gd25vq16_80c_q16_40c_sr; +extern struct status_register gd25vq21_41b_q21_q41b_sr; +extern struct status_register gd25q80b_128_sr; + +/* === Winbond === */ +extern struct status_register w25q80_16_32_sr; +extern struct status_register w25q40bl_64fv_sr; + +/* === Triple status registers === */ +/* === GigaDevice === */ +extern struct status_register gd25lq05_10_20b_sr; +extern struct status_register gd25q32_64c_sr; +extern struct status_register gd25q127c_sr; +extern struct status_register gd25q128c_sr; + +/* === Winbond === */ +extern struct status_register w25q128fw_sr; + #endif /* !__SPI25_STATUSREG_H__ */ diff --git a/statusreg_layouts.c b/statusreg_layouts.c new file mode 100644 index 0000000..f4275af --- /dev/null +++ b/statusreg_layouts.c @@ -0,0 +1,320 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2016 Hatim Kanchwala hatim@hatimak.me + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "chipdrivers.h" +#include "flash.h" +#include "spi25_statusreg.h" + +/* + * struct status_register { + * enum status_register_bit layout[MAX_STATUS_REGISTERS + 1][8]; + * uint8_t (*read) (struct flashctx *flash, enum status_register_num SRn); + * int (*write) (struct flashctx *flash, enum status_register_num SRn, uint8_t status); + * int (*print) (struct flashctx *flash, enum status_register_num SRn); + * enum wp_mode (*get_wp_mode) (struct flashctx *flash); + * int (*set_wp_mode) (struct flashctx *flash, enum wp_mode wp_mode); + * int (*print_wp_mode) (struct flashctx *flash); + * }; + */ + +/* === Single status register === */ +/* === AMIC === */ +/* A25L080 */ +struct status_register a25l080_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, RESV, RESV, SRP0 }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; +/* === Macronix === */ +/* MX25L6408E, MX25L6406E */ +struct status_register mx25l64xe_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, RESV, SRP0 }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* MX25L1605D, MX25L3205D, MX25L6405D, MX25L1608D, MX25L3208D, + * MX25L6408D */ +// TODO(hatim): Add support for MX25L6408D +struct status_register mx25lx5d_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, CP, SRP0 }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* MX25L6436E, MX25L6445E, MX25L6465E, MX25L12865E, MX25L12845E, + * MX25L12835F, MX25L1673E + * FIXME: MX25L12845E, MX25L12835F (These two chips have + * a configuration register that behaves like a 2nd status + * register.) + */ +struct status_register mx25lx65e_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, QE, SRP0 }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* === Double status registers === */ +/* === AMIC === */ +/* A25LQ16, A25LQ32A */ +struct status_register a25lq16_32a_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, TB, SEC, SRP0 }, + { SRP1, QE, APT, RESV, RESV, RESV, CMP, SUS }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* A25L032 */ +struct status_register a25l032_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, TB, SEC, SRP0 }, + { SRP1, RESV, APT, RESV, RESV, RESV, CMP, RESV }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* === GigaDevice === */ +/* GD25LQ16, GD25LQ40, GD25LQ80B, GD25LQ40B, GD25LQ64C, GD25LQ80, + * GD25LQ128C, GD25LQ32C */ +// TODO(hatim): Add support for GD25LQ32C, GD25LQ80B, GD25LQ40B, GD25LQ64C, GD25LQ32C +struct status_register gd25lq_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, SUS2, LB1, LB2, LB3, CMP, SUS1 }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25Q16B, GD25Q32B, GD25Q64B */ +struct status_register gd25q16_32_64b_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { RESV, QE, LB1, RESV, RESV, RESV, CMP, SUS }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25Q10, GD25Q16, GD25Q20, GD25Q40, GD25Q80 */ +struct status_register gd25q10_20_40_80_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, RESV, RESV, RESV, RESV, RESV, RESV }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25VQ16C, GD25VQ80C, GD25Q16C, GD25Q40C */ +struct status_register gd25vq16_80c_q16_40c_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, LB1, RESV, RESV, HPF, CMP, SUS }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25VQ21B, GD25VQ41B, GD25Q21B, GD25Q41B */ +struct status_register gd25vq21_41b_q21_q41b_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, HPF, LB1, LB2, LB3, CMP, SUS }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25Q80B, GD25Q128 */ +struct status_register gd25q80b_128_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, LB1, RESV, RESV, RESV, CMP, SUS }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* === Winbond === */ +/* W25Q80, W25Q16, W25Q32 */ +struct status_register w25q80_16_32_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, TB, SEC, SRP0 }, + { SRP1, QE, RESV, RESV, RESV, RESV, RESV, RESV }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* W25Q40BL, W25Q64FV */ +struct status_register w25q40bl_64fv_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, TB, SEC, SRP0 }, + { SRP1, QE, RESV, LB1, LB2, LB3, CMP, SUS }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* === Triple status registers === */ +/* === GigaDevice === */ +/* GD25LQ05B, GD25LQ10B, GD25LQ20B */ +struct status_register gd25lq05_10_20b_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, SUS2, LB1, LB2, LB3, CMP, SUS1 }, + { RESV, RESV, RESV, RESV, HPF, RESV, RESV, RESV }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25Q32C, GD25Q64C */ +struct status_register gd25q32_64c_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, SUS2, LB1, LB2, LB3, CMP, SUS1 }, + { RESV, RESV, RESV, RESV, HPF, DRV0, DRV1, RESV }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25Q127C */ +struct status_register gd25q127c_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, SUS2, LB1, LB2, LB3, CMP, SUS1 }, + { RESV, RESV, WPS, RESV, RESV, DRV0, DRV1, RST }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* GD25Q128C */ +struct status_register gd25q128c_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, BP3, BP4, SRP0 }, + { SRP1, QE, SUS2, LB1, LB2, LB3, CMP, SUS1 }, + { RESV, RESV, WPS, RESV, RESV, DRV0, DRV1, RST }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +}; + +/* === Winbond === */ +/* W25Q128FW */ +struct status_register w25q128fw_sr = { + .layout = { + { WIP, WEL, BP0, BP1, BP2, TB, SEC, SRP0 }, + { SRP1, QE, RESV, LB1, LB2, LB3, CMP, SUS }, + { RESV, RESV, WPS, RESV, RESV, DRV0, DRV1, RST }, + }, + .read = &spi_read_status_register_generic, + .write = &spi_write_status_register_generic, + .print = &spi_prettyprint_status_register_generic, + .print_wp_mode = &spi_prettyprint_status_register_wp_generic, + .get_wp_mode = &get_wp_mode_generic, + .set_wp_mode = &set_wp_mode_generic, +};