* Marco Runge Marco_Runge@raykiel.com [110512 14:46]:
I am a Software Engineer from Raytheon Ansch tz Germany and wanted to use flashrom to update the bios of our embedded bord form emerson. Unfortuneately s.th. must have gone wrong. First write of the bios was fine but after reboot I got a crisis report that the two flash banks are corrupt. I could boot from thumb drive anyway and wanted to write the backup copy but got the following error message:
Erase failed at 0x00000010! Expected=0xff, Read=0x5a, failed byte count from 0x00000000 - 0x0000ffff: 0xd092.
We are using the following board: http://www.emersonnetworkpower.com/en-US/ Products/EmbeddedComputing/CompactPCI/Pages/EmbCompCPCI7203.aspx
Chipset: Intel Ibex Peak Found chipset: Atmel AT25DF641 8192Kb SPI at 0xff800000
I hope you can help
Please post the full log (possibly with --verbose)
Also, does the image in flash match what you previously read from the chip? In that case it's most likely that the flash is write protected
Stefan