27 Jul
2012
27 Jul
'12
3:15 p.m.
Yes I will be glad to help. I saved the old bios to a file first so I'll see if I can put it back this weekend. This is my vmware host so I have to shut Down all my vm's first. Stay tuned.
Mike
--
Mike Corcoran
Wright State University, Information Security and Systems Support
Voice:937-775-2431, Fax:937-775-4049
http://www.wright.edu/security/
Don't be scammed, CaTS will NEVER ask for your password via e-mail!
-----Original Message-----
From: Stefan Tauner [mailto:stefan.tauner@student.tuwien.ac.at]
Sent: Thursday, July 26, 2012 11:32 PM
To: Corcoran, Mike
Cc: flashrom@flashrom.org
Subject: Re: [flashrom] thank you!
On Thu, 26 Jul 2012 16:07:06 +0000
"Corcoran, Mike" mike.corcoran@wright.edu wrote:
Hello Mike,
you are welcome (be aware of the double twist :)
> Found SST flash chip "SST39VF010" (128 kB, Parallel).
> ===
> This flash part has status UNTESTED for operations: WRITE
> The test status of this chip may have been updated in the latest
> development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom@flashrom.org if any of the above
> operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V,
> -Vr,
> -VE, -Vw), and mention which mainboard or programmer you tested.
> Please mention your board in the subject line. Thanks for your help!
If you like to help us, you can test writing the chip as well. Since
erasing has worked, it is very likely that writing will too, but it
would still be nice to know. Also, if you ever want to re-enable the
firmware of the controller you would already know that it works (or if
it currently does not work, you will have an updated, working version
of flashrom already and dont need to wait ;)
You can use any file of exactly 128 * 1024 B that does not contain 0xFF
only, or the data already in the chip (flashrom would skip writing
then). A file created by
dd if=/dev/urandom of=testfile-128kB.bin bs=1k count=128
would be ok.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner