[flashrom] [PATCH] Make satasii driver more robust

[David Borg]

Sorry, forgot to CC.the list.

Updated patch to apply cleanly against latest revision (1151) and
changed the string as pointed out by Rudolf Marek.

Regards,
David
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi thanks for doing that.
>
> Carl-Daniel Hailfinger wrote:
> > Make the satasii driver more robust.
> >
> > Untested.
> >
> > Signed-off-by: Carl-Daniel Hailfinger
> > Index: flashrom-satasii_robust/satasii.c
> >
> > --- flashrom-satasii_robust/satasii.c (Revision 1005)
> > +++ flashrom-satasii_robust/satasii.c (Arbeitskopie)
> > @@ -44,6 +44,7 @@
> >  {
> >       uint32_t addr;
> >       uint16_t reg_offset;
> > uint32_t tmp;
> >
> > get_io_perms();
> >
> > @@ -59,12 +60,19 @@
> >               reg_offset = 0x50;
> >       }
> > sii_bar = physmap("SATA SIL registers", addr, 0x100) + reg_offset;
> > sii_bar = physmap("SATA SiI registers", addr, 0x100) + reg_offset;
> >
> > /* Check if ROM cycle are OK. */
> >       if ((id != 0x0680) && (!(mmio_readl(sii_bar) & (1 << 26))))
> >               msg_pinfo("Warning: Flash seems unconnected.\n");
> > msg_pdbg("Using BAR5 access method.\n");
> > tmp = pci_read_long(pcidev_dev, 0x40) & (1 << 1);
> > msg_pdbg("BAR5 Indirect Access is %snabled\n", tmp ? "en" : "dis");
> > /* This bit has contradicting definitions in the 3512 datasheet. */
>
> this looks strange you get dissnabled or ensabled ;)
> > tmp = pci_read_long(pcidev_dev, 0x88) & (1 << 16);
> > msg_pdbg("BAR5 Access is %snabled\n", tmp ? "en" : "dis");
>
> This Reg is EN_66 in other controllers so I guess it just this and not the
> BA5_EN. It looks like it is driven by strap resistor only anyway.
>
> Interesting would be to test if BA5_EN is not enabled if you can access it
> through indirect access through C0/C4 regs.
>
> Thanks,
> Rudolf
> > buses_supported = CHIP_BUSTYPE_PARALLEL;
> >
> > return 0;
> > @@ -81,6 +89,7 @@
> >  void satasii_chip_writeb(uint8_t val, chipaddr addr)
> >  {
> >       uint32_t ctrl_reg, data_reg;
> > int i = 0;
> >
> > while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ;
> >
> > @@ -92,12 +101,19 @@
> >       mmio_writel(data_reg, (sii_bar + 4));
> >       mmio_writel(ctrl_reg, sii_bar);
> > while (mmio_readl(sii_bar) & (1 << 25)) ;
> > while (mmio_readl(sii_bar) & (1 << 25)) {
> > if (++i > 10000) {
> > msg_perr("%s: control reg stuck at %08x, aborting\n",
> > __func__, mmio_readl(sii_bar));
> > break;
> > }
> > }
> >
> > }
> >
> > uint8_t satasii_chip_readb(const chipaddr addr)
> >  {
> >       uint32_t ctrl_reg;
> > int i = 0;
> >
> > while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ;
> >
> > @@ -107,7 +123,13 @@
> >
> > mmio_writel(ctrl_reg, sii_bar);
> > while (mmio_readl(sii_bar) & (1 << 25)) ;
> > while (mmio_readl(sii_bar) & (1 << 25)) {
> > if (++i > 10000) {
> > msg_perr("%s: control reg stuck at %08x, aborting\n",
> > __func__, mmio_readl(sii_bar));
> > break;
> > }
> > }
> >
> > return (mmio_readl(sii_bar + 4)) & 0xff;
> >  }
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.10 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkv4VwUACgkQ3J9wPJqZRNU4BQCfYmc1fp2kmy5SjQHjirrsKP82
> enkAoKQLbvmaCGs6/qNfawamobV7RayX
> =7NEj
> -----END PGP SIGNATURE-----