[flashrom] [commit] r1664 - trunk

[repository service]

Author: stefanct
Date: Mon Apr  1 02:45:57 2013
New Revision: 1664
URL: http://flashrom.org/trac/flashrom/changeset/1664

Log:
serial.c: be more pedantic.

Check more return codes and close the file handle in case of errors in
sp_openserport().

Signed-off-by: Stefan Tauner 
Acked-by: Stefan Tauner

Modified:
   trunk/serial.c

Modified: trunk/serial.c
==============================================================================
--- trunk/serial.c	Mon Apr  1 02:45:51 2013	(r1663)
+++ trunk/serial.c	Mon Apr  1 02:45:57 2013	(r1664)
@@ -185,8 +185,8 @@
    }
    DCB dcb;
    if (!GetCommState(fd, &dcb)) {
-		msg_perr_strerror("Could not fetch serial port configuration: ");
-		return SER_INV_FD;
+		msg_perr_strerror("Could not fetch original serial port configuration: ");
+		goto out_close;
    }
    const struct baudentry *entry = round_baud(baud);
    dcb.BaudRate = entry->baud;
@@ -195,16 +195,19 @@
    dcb.StopBits = ONESTOPBIT;
    if (!SetCommState(fd, &dcb)) {
    	msg_perr_strerror("Could not change serial port configuration: ");
-		return SER_INV_FD;
+		goto out_close;
    }
    if (!GetCommState(fd, &dcb)) {
-		msg_perr_strerror("Could not fetch serial port configuration: ");
-		return SER_INV_FD;
+		msg_perr_strerror("Could not fetch new serial port configuration: ");
+		goto out_close;
    }
    msg_pdbg("Baud rate is %ld.\n", dcb.BaudRate);
    return fd;
+out_close:
+	CloseHandle(sp_fd);
+	return SER_INV_FD;
 #else
-	struct termios options;
+	struct termios wanted, observed;
    int fd;
    fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY);
    if (fd < 0) {
@@ -212,18 +215,43 @@
    	return SER_INV_FD;
    }
    fcntl(fd, F_SETFL, 0);
-	tcgetattr(fd, &options);
+	if (tcgetattr(fd, &observed) != 0) {
+		msg_perr_strerror("Could not fetch original serial port configuration: ");
+		goto out_close;
+	}
+	wanted = observed;
    const struct baudentry *entry = round_baud(baud);
-	cfsetispeed(&options, entry->flag);
-	cfsetospeed(&options, entry->flag);
-	msg_pdbg("Setting baud rate to %d.\n", entry->baud);
-	options.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS);
-	options.c_cflag |= (CS8 | CLOCAL | CREAD);
-	options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
-	options.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR);
-	options.c_oflag &= ~OPOST;
-	tcsetattr(fd, TCSANOW, &options);
+	if (cfsetispeed(&wanted, entry->flag) != 0 || cfsetospeed(&wanted, entry->flag) != 0) {
+		msg_perr_strerror("Could not set serial baud rate: ");
+		goto out_close;
+	}
+	wanted.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS);
+	wanted.c_cflag |= (CS8 | CLOCAL | CREAD);
+	wanted.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
+	wanted.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR);
+	wanted.c_oflag &= ~OPOST;
+	if (tcsetattr(fd, TCSANOW, &wanted) != 0) {
+		msg_perr_strerror("Could not change serial port configuration: ");
+		goto out_close;
+	}
+	if (tcgetattr(fd, &observed) != 0) {
+		msg_perr_strerror("Could not fetch new serial port configuration: ");
+		goto out_close;
+	}
+	if (observed.c_cflag != wanted.c_cflag ||
+	    observed.c_lflag != wanted.c_lflag ||
+	    observed.c_iflag != wanted.c_iflag ||
+	    observed.c_oflag != wanted.c_oflag ||
+	    cfgetispeed(&observed) != cfgetispeed(&wanted)) {
+		msg_perr("%s: Some requested options did not stick.\n", __func__);
+		goto out_close;
+	}
+	msg_pdbg("Baud rate is %d.\n", entry->baud);
    return fd;
+
+out_close:
+	close(sp_fd);
+	return SER_INV_FD;
 #endif
 }